24" Cinema Display (LED) with 2008 Mac Pro

My 23" Cinema Display monitor is beginning to show signs of aging, having been used with two Mac Pros and a G5. I'd like to upgrade the monitor to a 24" LED Cinema Display, but the 2008 Mac Pro doesn't have the mini-DVI port. Is there any upgrade path here? The new (unavailable) ATI Radeon card?, mini-DVI to DVI adapter (monitor to computer)? I can't believe Apple would leave recent Mac Pro owners with no path to upgrade the monitor (save for the overpriced 30" non-LED monitor).

The nVidia card says it is specifically for the 2009 Mac Pro, while the ATI says it is for the early 2008 or the early 2009. The hard to get ATI appears to be the only card available for the 2008 that has the mini-DVI plug. I'd love to be able to get the less expensive card, but the early 2009 uses different memory than the early 2008.
The cards have been used successfully in Mac Pros older than thiose listed by Apple
<http://www.barefeats.com/nehal06.html>
"If you didn't buy a new 2009 Mac Pro but want to use the new graphics cards released with the Nehalem Mac Pros, you can buy the GeForce 120 GT and Radeon HD 4870 in kit form from Apple. They both worked in our 2008 Harpertown 3.20GHz Mac Pro as you can see from the graphs above. We also got the Radeon HD 4870 to run in the 2007 Clovertown first generation Mac Pro. A close colleague has one working in the 2006 Woodcrest first generation Mac Pro."
<http://blog.macsales.com/602-testing-those-new-graphics-cards>
This report says the Radeon HD 4870 Mini DisplayPort didn't work in the older Mac Pros, but hat may be fixed when 10.5.7 appears.

Similar Messages

I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?

I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?

The 30" display needs a DUAL-LINK adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

What cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro

what cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro

No.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

2010 iMac target display mode with 2013 Mac Pro

I have a 2010 27-inch iMac that I want to use with target display mode for a 2013 Mac Pro. I have a mini display port to mini display port cable connecting them. When I plug the cable in the iMac screen goes black, but eventually reverts back to iMac desktop. Pressing Cmd-F2 makes it go black again, but eventually reverts back. I was under the impression that this was the correct cable to use to connect, but it doesn't seem to work. Anyone have ideas for what to do? What am I missing? Thanks!

You can use the cheaper single link adapter
<http://store.apple.com/product/MB570Z/B/mini-displayport-to-dvi-adapter>
if you don't have more than two DVI or HDMI displays.
<http://support.apple.com/en-ca/HT202801>
If you will be using more, you can still use a single link adapter, but it must be ACTIVE, such as
<http://www.amazon.com/Accell-B087B-005B-DisplayPort-Single-Link-Certified/dp/B00 4071ZX0>

Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion

After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display. The image is displayed with a black bar on the right and on the bottom. And the left side of the content is not visible. I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct. I held down the option key to try to detect displays or switch to resolutions that are not normally available. When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart... The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7. The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion. I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...

That card is for a PC it may not give you Startup and Option-Boot screens.
The 7950 "Mac Edition" card has a very distinctive look:
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

Apple cinema display connection with mini mac

I have an Apple cinema display (http://www.everymac.com/monitors/apple/studio_cinema/specs/apple_cinema_display_ 30.html) and i bought a new mini mac, how i can connect them? what i need?
thank you all

thank you!
do you mean this?
to apple here they gave me this...
but when i put it the cinema display seems not to have power(electricity) ... are you sure that the dual will work?
thanks again

Wil this Dell Display work with my mac pro ? standard graphics card

http://accessories.euro.dell.com/sna/productdetail.aspx?c=uk&l=en&s=dhs&cs=ukdhs 1&sku=184923
Above is the link to the one i want! will it work? i think yes but second opinion would be nice.

It depends in part on what graphic card it is attached to. And if you have 2nd monitor.
Mac Pro 2009 + OEM GT120 + Dell doesn't always work with the MiniDisplay Ports.

Start up issues with 2008 mac pro

Hi Folks.
I'm having an issue when trying to start my Mac Pro dual 2.8,,,,,,,
has been working fine but today no cigar, starts to power up with apple and spinning, then goes dead.
What's Up? anyone......
Thanks

Not sure what you mean by "goes dead." But if it's just a startup issue then you might try this:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Is 3T drive compatible with 2008 mac pro?

The documentation that came with the system states that up to 4 2T drives can be installed. I don't think anyone was putting out 3T drives for end-use consumers at that time. Can one of the newer, larger 3T drives be used in this system?

Yes, you can, however you have to format them with GUID partition Table or GPT.

Will my LED 27 Cinema Display work with the new Mac Pro?

Will my LED 27 Cinema Display work with the new Mac Pro?

Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

Video cards for 2008 Mac Pro with 4 20 inch Cinema Displays

I have an early 2008 Mac Pro Quad Core with 16GB RAM. I run a 4 (20 inch Mac Cinema Display) monitor configuration off of it. one of my video cards just failed. They were never very good at handling FX in FCP anyway. I want to upgrade and get good cards for 2 displays each and if possible, video cards that will facilitate FCP X as well. What should I get?

OS X has drivers in 10.6.5
It is the ROM firmware that makes it work though there is help there too now for PC cards and flashing.
OWC is over pricing.
100s of threads asking the same question for the last yr.
5870 also, but costs $200 more.
More about using 6870 and others:
netkas.org
PS: the 'short' url for the Apple ATI 5770 w/o any user/cid - Product /MC742ZM/A
http://store.apple.com/us/product/MC742ZM/A
Radeon 5870 vs 5770 GTX 285 4870
ATI Radeon HD 5770 - specs etc

2008 Mac Pro and Apple Cinema Display 27"

Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

Using a 30" Cinema Display with new Mac Pro

Hello Everyone:
I just purchased, and waiting to arrive a new 2014 8 core Mac Pro which is an upgrade to my 2009 quad core Mac Pro. I currently use a 30 inch Apple Cinema display which has the DVI connection. I was thinking that I would use a DVI to HDMI adapter and plug the 30" into the HDMI port on the new Mac Pro. I have since heard that people have been having issues with this older monitor getting it to work properly with the new mac pro. some have suggested buy the $99 mini display port to DVI adapter and using that, but I don't believe there is a mini display port on the new mac pro.
I have considered buying a new thunderbolt display because I am assuming that it will have a much better image quality than the older 30 in display but I hate the fact that it's a 27" and I would be giving up the 3" in size. I do a lot of video and audio recording editing and love the extra screen real-estate. Can anyone confirm a couple of things for me?
1. Will the 30 inch display work with a new mac pro and can I use the DVI to HDMI adapter?
2. Does the new Thunderbolt display have a much better image quality than the 30 in display and because its newer, will look that much better with the mach pro?
Thank you in advance.

1. Will the 30 inch display work with a new Mac Pro?
Yes.
Can I use the DVI to HDMI adapter?
Not if you want full resolution. You need a Mini DisplayPort to dual-link DVI adapter
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>
It plugs into a Thunderbolt port (and USB port) on the computer.
2. Does the new Thunderbolt display have a much better image quality than the 30 in display and because its newer, will look that much better with the Mac Pro?
No, it has more pixels (in the vertical direction), but they are spaced a bit more apart, so you don't want to be as close to the display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

Hi,
Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
Jim

24" Cinema Display (LED) with 2008 Mac Pro

Similar Messages

Maybe you are looking for