24" imac 2.4 says connected to internet via airport--but does not

I just got a new 2.4ghz 24" aluminum imac. There are three other macs in my house, all of which connect to our wireless network and are able to browse the internet. This new computer can connect to the network, yet it always has one of two problems: either it says it is connected to the network, but can't access the internet, or it says it is connected to the internet via airport, but when you open your web browser, no such luck. Many times when I open the network preference panel, there is no router number assigned. Sometimes there is. I can connect to other networks in the neighborhood that don't require a password just fine (how I'm writing this). Why can this new machine not connect, when all three of the other macs in the house have no problem?
anyone, please help. this is frustrating.
thanks,
keegan

OK but, like you, my other machines (PowerPC iMac and Power Book) did seem to work OK while the new iMac was playing-up. It was only when I noticed that the Old iMac had not downloaded some podcasts that I started to look at the router. I now remember having a similar problem a few years ago - frequent failure to automatically log-in to the router, occasional failure of manual log-ins and slow/unreliable connection once logged-in. A new router fixed the problem. It's a real pain but there you are. Must remember to keep receipt of current router and kick-up a fuss if it fails within the guarantee period.
Sorry if this doesn't help but I thought it worthwhile posting my experience over the last 2 days.
Have you tried connecting to your router by ethernet?
I'll let you know if the problem returns but all is sweetness and light at present.

Similar Messages

Can't connect to Internet via Airport but CAN via Ethernet

Yeah so I have tried TWO different of my AX's and can not connect to the internet via EITHER even though Network Status says "you are connected to the internet via Airport". But, if I hook the ethernet cable directly to the computer from the modem it connects to the internet fine. What am I missing. Oh yeah, and on one of the AX's the "music" tab does not appear next to the "WDS" tab thus not allowing AirTunes on that AX, any ideas on that too? PLEASE HELP!!

CONNECTED!! After resetting the modem, llike you suggested, I am able to get the wireless network back up and running, BUT...I am still having problems with one base station not showing the "music" tab and thus not letting me stream music to it. When I hit "configure" the tab shows for a quick second then disappears. Any idea?

Connected to internet via ethernet but server not responding

I have browsed some threads on this topic but none gave me an answer, and my set up is not quite the same as those that I've read. I don't want to hijack another thread and confuse the readers. I would be very grateful for help on this issue.
I have connected a G3 imac to a G5 imac with ethernet cable and both are configured for file sharing following the instrauctions on this help site. Both machines communicate and file sharing is okay.
Now I want to share the dial-up internet connection of the G3 with G5 over this ethernet connection. I have configured both machines following instructions on this site. At the moment file and web sharing is enabled on both machines.
In sharing preferences/internet internet sharing is turned on on the host (the one connected to the internet)
In sharing/firewall personal web-sharing is checked on both machines
In built-in-ethernet/TCP/IP config IPv4 is off on both, although i have tried it with IPv4 set to using DHCP on the host, and then on both
No proxies are set
I have tried it with Appletalk both on and off on both machines
In network status internal modem is at the top of the list on the host and ethernet is at the top on the guest and both say that they are connected to the internet. The ethernet appears as connected to the internet with green light even when the host computer is not connected to the internet.
Yesterday I was able to browse using IE in windows XP running on virtual PC on the guest (G5) but this is the only time it's worked and I don't know what i did for that to happen. I only wanted to run a software activation on the G5 but the message unable to establish a connection appears.
I followed the help in virtual PC to share the Macs internet connection with windows, but havn't been able to connect to internet using the browsers on the OS X system. Tried altering browser preferences as well with no joy.
Everything works fine on the G3
I don't know where to go next.
imac G5 Mac OS X (10.4.3)

Teecee,
You may want to re-post this is the "Internet, Networking and your iMac G5" Forums to get more relevant and better informed answers as pertaining to your issue and your particular model.
Here is the link to that area of the discussions:
http://discussions.apple.com/forum.jspa?forumID=880
This forum is for "Using your iMac (early 2006)" models (or Intel CD) and this venue may not quite provide the insight and background you need for your specific model and problem.
Hope you get the help you need there...

Can't connect to internet via AirPort, but am getting full signal strength.

I can connect to the network, but can't connect to any website on the internet. My laptop PC is able to connect to internet & network wirelessly..... but it's just my MacBook that can't.
Thanks & happy thanksgiving.

what ip address to you have in your laptop?
is it set to DHCP or did you manually enter in a ip address in your network preferences?

HT1752 iMac flat panel 2003 shows airport but does not connect

Hi,iMac flat panel 2003 shows airport but does not connect

No problems.
Let's double-check your iMac's Internet Sharing configuration:
To setup for Internet Sharing (Wired to Wireless):
Setup the Network
Cable Modem > (Ethernet cable) > \[Ethernet port] iMac > (wireless) > MacBook
Enable Software Firewall (iMac)
System Preferences > Security > Firewall
o Block all incoming connections (enabled)
Enable Internet Sharing (iMac)
System Preferences > Sharing
o Select "Internet Sharing" from the options in the left column
o Share your connection from: Built-in Ethernet
o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
AirPort Options... (iMac)
o Network Name: <anything you want>
o Channel: Automatic
o Enable encryption <do NOT enable at this time>
o Click OK
o Select "Internet Sharing" again
o Click "Start" to start Internet Sharing
o Click Start
Please verify these settings, and try accessing the Internet from the MacBook again. For this exercise, I suggest co-locating the MacBook with the iMac.

My Ipad connects with my hotel wifi, but does not indicate that it is a secure wifi, even though it requires a password to access - no lock symbol, hence no password request, hence no internet access - help.

My IPad connects with my hotel wifi, but does not indicate that it is a secure wifi, even though it requires a password to access - no lock symbol appears against the wifi network, hence no password request, hence no internet access - help. My collegue who also has an Ipad can access the same wifi with ease, so it must be something to do with the settings on my machine, although checking the two machines, there appears to be no difference in the settings.

My experience with hotel wifi is that it's an open, and unsecured, connection, but unless you agree to their terms on a launch page, you can't go any further or connect. Sometimes I need to force safari to come up and even make it go to a page, to trigger the auto load of the 'agree to our terms' page.
Unless your machine is work provided so maybe could be blocked from unsecured net access?

Trouble connecting to internet via airport

i can't connect to the internet via airport. Does anyone know what the problem may be?

There are several items that may be behind this issue.
So troubleshooting them by trial and error is most likely
a way to attempt to resolve the cause, especially with
an older OS X and hardware, while trying to connect to
a newer base station and different newer frequency...
•Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
The above covers several areas of settings and ideas.
If the computer has been online, and now does not work
wirelessly, that may be a matter of an accidental change
in settings; or something turned off that used to be on.
A general overview, w/ examples of settings similar to the above, for 10.3.9/10.4.11 appears here: http://www.tr.txstate.edu/get-connected/computerservices/wireless/encrypted/maco sx-wpa2.html
Is you computer running OS X 10.3.9 Panther? If so,
your built-in AirPort card may be an 802.11b version
and the security protocol would not work with a newer
or modern wi-fi base station (WEP, WPA) unless those
settings were changed. You can turn off security if the
computer is too old to be able to connect with the old
settings for that protocol. Also, a later wireless base
station may not see an old wi-fi card using 802.11/b.
So it is a matter of knowing what you have on either side
of the connection issue; the base station and the wi-fi
card have to use the same frequency and security. Or
there are work-arounds to attempt to correct this matter.
Hopefully you can connect and use the wi-fi internet.
Good luck & happy computing!

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

Since running the update, my mail is messed up. Light saying connected to internet is green but SMTP's (connection Dr) are red. Is there a setting I need to change?

I ran this update on my Mac. Everything else seems fine BUT mail isn't connecting to the servers. I've opened connection Dr. says I'm connected to the internet but none of the servers e.g., gmail, or yahoo will connect anymore. What do I try?
About the OS X Mavericks v10.9.5 Update This is the update I just ran.

I just went back through and went through the port settings after looking up what should be there. Why were some of them different after the update?
I did make a couple changes to the port #'s and restarted my computer again.
I opened the connection Dr. says my internet is fine but still not receiving or sending email. still shows that email is not connecting.
I know the esp's work ( I finally figured out esp vs isp) My email is up and working on my iPad so it is working MUST be a setting.
it is 3:45 my time and I'm off to work for 4 pm - so this is another 3 hours of reading and working on this to try to reinstate my emails on my home computer. Thank goodness my iPad wasn't mucked up too.
I'll go through with a fine tooth comb after work at 10 tonight.
I appreciate your help.

Can't connect to internet via laptop, but desktop works fine via Airport

I am having a very strange problem. I have an iMac and Macbook Air. Both on an Airport Express network, connected to Verizon DSL. My iMac never has a problem connecting to the internet. However, my Macbook Air almost never can connect. I am able to get onto my network with both computers without a problem. The only thing is my laptop doesn't seem to see an internet connection. Sometime it works, but mostly not. One thing to note is that Verizon had me recently switch my modem to Bridge Mode so that I could properly use the Back to My Mac service. I would appreciate any help. Thanks in advance.

Is the Airport Express the router, or is it also in Bridge Mode?
Someone has to be the router and do the necessary Version DSL login (assuming you are on one of the Verizon DSL lines that requires PPPoE logins).
If your iMac is doing the PPPoE login, then it is the only system that will be allowed to use the DSL connection (1 PPPoE login per DSL line). Again this is assuming your Verizon DSL line requires a PPPoE login.
If your Airport Express is in Router mode and is doing any necessary logins to Verzion, then ignore what I have just said.
The next question is what versions of Mac OS X are on each system? Tiger (Mac OS X 10.4), Leopard (Mac OS X 10.5)?
Do you know if you are getting an IP address assigned to the MacBook Air? Assuming the Airport Express is the router assigning DHCP IP addresses, I would expect it to have a 10.0.1.* address.
If the MacBook Air has a good IP address, does it have good DNS servers? You could experiment by assigning your own DNS servers, such as 208.67.222.222 and 208.67.220.220 from OpenDNS.org. You would set these in System Preferences -> Network -> Advanced -> DNS (assuming Leopard on the MacBook Air).

Network prefs: "connected to internet via airport"... but can't go online??

I've got steady green lights on my airport express and modem/router; and in Network Preferences it says that I am connected to the internet via Airport (green light here too). BUT, I can't get online with any of my browsers or my mail client. What's going on here? Help appreciated.
Thanks
eMac 1GHz, iBook 14" 1.33GHz Mac OS X (10.4.8)

If you have a Modem Router combined and an Airport Express
The Express must be set up to NOT DISTRIBUTE IP's.
You do not mention what brand Modem or Router or Modem /Router combined. Your network confiquration can very a little depending on what you are using.
If you are using all Apple Airport products the confiquration is pretty straight forward.
If you are using 3rd party products then the set up can be a little different.
From what you say in your post you are using 2 routers, my quess is the Express is set up to distribute IP's and if your other router is set up this way then thats your problem.
Don

Macbook connectivity to internet via airport extreme is flakey

Hi,
Just bought a brand new airport extreme and I already own a June 2009 Mac book pro w/ snow leopard.
I always run software updater, so the Airport 2009-002 patch/fix is on this system.
I have a strange problem with my connectivity to the internet from my mac via the airport extreme.
Very regularly (and seemingly randomly) the laptops connectivity to the internet will drop out... i.e. websites won't respond, big websites (like google) don't respond to pings or anything. While these internet "drop outs" are happening, i can jump onto my PC (which is connected to the airport extreme via ethernet) and the internet is working fine.
Also, Wifi never drops out through this whole situation. This means that while I can't access the internet, my reception is still FULL and I can SAMBA connect to my PC and with other computers on the network.
It's very strange that purely internet via the Airport Extreme is having these issues.
The Airport is in Bridge mode (which means the ADSL modem/router is the DHCP server). The ADSL modem/router does not have wifi active or anything connected to it (other than the airport).
I've never had any issues with my internet - this is the first. My only real option if this can't get resolved is to return the airport, as this is inhibiting me from working from my laptop.
Anyone else experience similar issues?
Can someone recommend any course of action to work around this issue?
Is there anymore information this forum needs to debug this problem? How can I obtain this info?
I hope someone can help.
Regards,
Vijay

I seem to be in a very similar predicament, however I'm served even worse:
I'm loosing Internet connection over both LAN and WIFI. And the Airport Extreme does not detect the loss of connection even though the logging indicates the internal ntp client (trying to connect to time.euro.apple.com) fails (already on dns resolution).
Currently, I'm dvlp-ing a shell script that checks 4 websites, and if all 4 are unaccessible, I launch an applescript that restarts my airport extreme basestation.
This however does not always seems to solve the problem. Seemingly I would have to reset the modem.
The problem can - according to me - not be provider related, since it does not occur when the TimeMachine is replaced by a SL-installed mac mini (that however cannnot function as router (yet)).
Any hints ? anyone ?
I previously had installed an Airport Extreme 10/100 version, which showed the same behaviour. Since the system was out of warranty, I decided to upgrade to a faster system, including TimeMachine, but unfortunately, the problem is still there.
I'm guessing now it could be related to the router being configured in dhcp (getting its ip address over dhcp), but the server provides a static ip address (never changes),... and maybe here there's something fishy.

My ipda is connected to internet via wifi , but is showing offline in iCloud on my pc ?

Hi my ipad is connected to the internet via wifi, but showing offlien in icloud on my pc ?
Any ideas ?
On the ipday .. it keeps asking me to accept icloud terms and conditions, but I ca't as i have forgotten my restrictions passcode and cant access icloud from the ipad. Could this be anything to do with it ?

Hi there,
The link wont load... i've tried both Explorer and Chrome. I also tried using the link via the HP website but this didnt work either.
There's and HP diagnostic tool downloaded on my desktop (is this hte same thing) when i run this is launches a browser which times out.
I also ran the troubleshooting tool but it determined it was a network issue and directed me to the forum.
My work IT support recommended linking the printer to my computer via USB but the printer didnt come with one and I don't have one available.
What else can I do - is there someone i can call?

IMac G5 won't connect to internet via Ethernet

So i have an iMac G5 that isn't connecting to the internet via ethernet.
I have already taken a look through all the Network Preferences, tried going through the network port configurations and setting all of that up again, created a new location for it.
I tried turning off the modem, and letting it restart - restarted the iMac - tried to set up all of these settings again.
I also created a test user account to see if it would work there - still nothing.
I hooked my own 17" MacBook Pro to it and it works perfectly. I never had to go through any settings on mine - it just worked as soon as i plugged the Ethernet cable in.
So the modem itself works - because my computer works. What else could be the problem?
I went through the Network Diagnostics on hers - all green dots and it says that the internet connection is working perfectly. It gives me an IP address - but it still won't load a webpage, and it tells me there that i am not connected to the internet. I am all out of ideas.
If anyone can help me with this it would be greatly appreciated. Thank you so much!

What OS you using? 10.5?
My memory of 10.5 is fading so you may need to figure out the vague instructions.
To make this easier to type Macbook Pro = MBP
When testing disable wifi & use ethernet on both machines.
Are both set to use DHCP? Or are you using manual settings?
Compare the IP addresses of the MBP & the iMac when they both use ethernet.
Compare the subnet masks too just to be sure nothing is different.
Does the iMac do any local networking at all? (e.g. is iTunes or File sharing visible on it). see *
Does it see the MBP in the sharing sidebar or can it connect to anything on the local network?
Have you connected the MBP to the iMac using the exact same cable that the iMac connects to the router?
Does the MBP work if connected to the router using the iMacs ethernet cable?
* You will need to enable file sharing to see the shared Mac in the sidebar (or have mother service shared). Enable it in System Preferences > Sharing whilst you test.
If you are have local networking in a functional state it could be…
DNS - what is the iMac DNS set to on each Mac?
Are either of them showing a grey DNS entry in System Preferences > Network? That means the router is supplying that info.

Both iMac and powerbook can't connect to internet via Airport.

I have an iMac that is directly wired to an airport base station and a G4 powerbook that connects via a card. Neither can connect to the internet. The iMac is set up as follows:
Cable modem > ethernet cable to WAN port on AEBS > ethernet cable from AEBS to iMac.
The powerbook detects the base station and created its own network as soon as it did, yet still nothing. The first and third lights on the AEBS flash as to show activity and I have unplugged the modem to reset it multiple times.
I am completely confused as to what is going on. Can anyone please help?

If it helps any, I'm in the same boat. I've had an AEBS that has worked well until yesterday. Now, my Powerbook can't connect to the internet via wireless or ethernet (connected directly to the AEBS). My POwerbook CAN talk to my networked HD. To make things worse, my two Tivos (connected to the network via an Airport Express & WDS) CAN connect to the internet.
I'm totally confused. Since I can't connect to the internet when directly plugged into the AEBS, but can connect when I plug directly into the cable modem, I think I'm going to just buy a new AEBS...

24" imac 2.4 says connected to internet via airport--but does not

Similar Messages

Maybe you are looking for