24" iMac and 20" Cinema display extended desktop mode ?

I got a 24" iMac and a 20" Cinema display. I wanted to know if they will work on extended desktop mode? I didnt try to hook it up yet as I am waiting for mini dvi to dvi adapter to come.
Thanks

Hi,
according to this http://developer.apple.com/documentation/Hardware/Conceptual/HWTechVideo/index.html#//appleref/doc/uid/TP40003504
you should have no problems (you must scroll a bit down the iMac 24" section)
Have Fun
Stefan

Similar Messages

3 Monitors with 1 iMac and 2 Cinema Displays conected to Windows Gaming PC Help!

Hi
I want to set up a 3 monitor gaming set up with 1 iMac in the middle and 2 cinema displays either side. This would be a tripple monitor set up.
I am looking to set up a new computer and i want to have 3 monitors. I also want to have an iMac so i want the iMac in the middle and two cinima displays next to each other. i Want to also conect these monitors with a Windows 7 gaming PC.
I want to hook up my very powerfull windows 7 gaming computer wich has 3 SLI GTX 560 EVGA cards. These cards have a display port output.
So i want to run 3 monitors from my gaming machine and i also want to have my iMac use the 3 monitors aswell. I also want to take advantage of the full, maximum resolution. I would get the thunderbolt cinema display monitors.
Gaming comupter has 3 display ports so i need to connect each graphics card to one of the monitors. I then need to conect the two cinema displays to the middle iMac.
I have not bought anything yet i just need to know if i can do this. Need to know stuff like what adapers to buy and what compatabilties.
I need to know if this is posible and how i would do it.
Thanks

Could i use some of these cables?
It says they are thunderbolt conpatable.
http://www.macfixit.com.au/shop/index.php?_a=viewCat&catId=229
http://www.macfixit.com.au/shop/index.php?_a=viewProd&productId=2444

IMac and 24" Cinema Display Brightness Issue.

Hello all, I'm using a 27" iMac and a 24" cinema display for a second monitor. Every time I restart the computer, my secondary monitor goes to full brightness. Why wont this stick? Thanks!

Hi,
according to this http://developer.apple.com/documentation/Hardware/Conceptual/HWTechVideo/index.html#//appleref/doc/uid/TP40003504
you should have no problems (you must scroll a bit down the iMac 24" section)
Have Fun
Stefan

IMac with 24" Cinema Display

Yesterday I went to the Apple Store and asked about buying a new 27" iMac and connecting it to my 24" Cinema Display. I was told that I could do that with an adapter and was sold a Mini DisplayPort to DVI Adapter.
When I got home I realized that wasn't the correct adapter. I called the store and was told that it wasn't possible to connect the iMac to that particular monitor. (As an aside, I was really ****** because that was the whole reason for making this purchase!)
Then I realized that the video plug fit in the iMac video port. I plugged it in and it seems to be working just fine. I just don't have the power and USB plugs from the monitor cable plugged in.
So, am I okay doing this? Am I hurting anything? Was the genius at the Apple store wrong when I was told I couldn't connect the iMac and the Cinema display? The reason for my concern, several years ago I plugged an external display into an older iMac and it caused video problems requiring the replacement of the monitor.
I can't seem to easily find anything in the forums, so any response/reassurance would be much appreciated!!

OK, you confused me talking about the m-DP to DVI adapter. The Apple Store should refund your money for that bad recommendation. I think whomever sold it to you made the same mistake that I did. They thought that you had the model Cinema Display prior to the one that your have.
So you have the 24" Cinema Display that was available from 2008 until just this past summer. It has one cable that ends in three connectors; mag-safe, USB and m-DP. Well the mag-safe connector was to power a MacBook so that one is fine not plugged in. The USB connector is for connecting the USB ports on the back of the display to your Mac, so there should be no issues plugging that in because it will give you an extra self-power hub if you need more USB ports at some point. And of course the m-DP is allowing the Mac to drive the display.
I think that you should still be OK. Your iMac has a better GPU than the minimum requirement for your display.

24" and 30" cinema displays on same card?

Will either the GT120 or ATI card allow you to connect both a 24" and 30" cinema display on the same graphics card? The 30" cold use the dual link DVI port and the 24" could use the MiniDisplay port; I just don't know if two different resolutions on each port are supported...

You can run both from the same card, and with different resolutions. Of course you won't get full resolution on both displays when mirroring different size displays, but in extended desktop mode they can each run at full resolution..

Color problems with duo monitor (MPB and 24' Cinema Display)

I have a new 24' Cinema Display attached to my 15' macBook pro 2.66 (not the new one with the SD slot) and I keep getting weird colors on the MBP display.
Here is a screengrab from the MBP. The main display is fine. What is my MBP screen experiencing?!
http://www.madreview.com/images/screengrab.jpg
You can ell the colors are off on Tiger Woods on the bottom and on the background. Please help.

If I may jump in, I have almost the same question and would like to clarify the Cmd-F1 suggestion. (I'm looking at buying the 24" LED for my slightly older MBP with max resolution 1440x900.) If one runs this monitor in extended desktop mode, you can reach the max resolution for the monitor, if I understand correctly, but is some of your "desktop" then spread across your built-in MBP LCD? That's less useful than having the entire 24" available for keeping multiple windows open.
Just want to understand whether this is really worth it! Thanks, and PMFJI.

Tablet PC calibration error in Adobe Photoshop and Illustrator CS3 whilst in Extended Desktop Mode

Hey everyone!
I've run into a snag which hasn't bugged me before because I never used a second monitor, but now that I do, Photoshop and Illustrator don't function properly.
I am running my Adobe products on my Lenovo X61 Thinkpad Tablet, which is Wacom PenEnabled. It's got the basic digitizer pen and pen pressure features, no stylus tilt or anything.
Whenever I run Photoshop or Illustrator in Extended Desktop Mode so I can have a different window open on my external monitor and the Adobe app on my tablet screen, my stylus goes strange. It seems to think that the extended desktop is part of the Adobe window, so when I move my stylus to draw, the cursor will appear on the external monitor, usually proportionate to the size of the screen...ie. It interprets the external and tablet screens as one desktop and the top left corner of my tablet screen is the top left of my external, whilst the bottom right on tablet IS the bottom right on tablet, if that makes any sense...sorry.
So I can't draw anything in photosho unless I set it back to standard desktop mode, or mirrored desktop. I've searched over the net and these forums and I can't find a fix for this. I was walking in harvey norman the other day and the Wacom Cintiq 12" was there on display, and it had the same issue with extended desktop and photoshop.
Has anyone had this issue before and/or does anyone know of a fix for it? I'll keep searching around and playing with the computer until I fix it and I'll post any solutions I find here if noone else has one.
My system details are:
Abobe Photoshop CS3 10.0.0
Adobe Illustrator CS3 13.0.0
OS: Windows Vista Build 6001, Service Pack 1, 32bit
RAM: 2GB
HD: 18.2GB free Disk Space (out of 66.3GB on the Active Partition)
Video: Intel GMA: Mobile Intel(R) 965 Express Chipset Family

I'm using an HP tx2011au tablet pc, using adobe flash cs3 and have the exact same problem. it becomes decalibrated only while the flash window is open, and only while flash has a file open, and only when using an extended desktop. even if flash is open and it has no files open it works fine.

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

Which exact Mini?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

What cable do I need to connect my 27 inch iMac to my Cinema Display

What cable do I need to connect my 27 inch iMac to my Cinema Display to have two displays?

It depends on what type(s) of video input you have on your TV. If you've an open HDMI port on your TV, you can use a Thunderbolt (Mini DisplayPort) to HDMI adapter and it will carry the sound also. See -> here.
Good luck,
Clinton

Can I use a 19" LG monitor with a MacBook pro 13" and 24"cinema display

I would like to buy a new 13" mac book pro and 24" cinema display but would also like to use my existing 19" LG display to extend my destop space. Can it be done effectively and what kit do I need?
Thanks
Message was edited by: hotmangopickle

All a touchscreen is going to do is replace your mouse or trackpad, you can't use two hands at once to gain any speed advantage organizing photo's.
Also it would have to be a pretty big touch screen, place your two hands over a 17" screen and most of the screen is blocked.
If you need something like that, talk to Microsoft, they have a "Big @ss table" that does that.
Gives me a backache just looking at those people
http://www.engadget.com/2007/06/20/microsoft-surface-one-day-your-computer-will- be-a-big-***-table/

Extended desktop mode with external display

I use my Macbook with an external display. Sometimes I need to use extended desktop mode and sometimes I don't need the extra desktop space and prefer to work only with my external display. My needs change as I work throughout the day and I'm getting tired of having to close the Macbook to put it to sleep and then wake it up without opening the lid to just have one display (the external one).
I'm wondering if anyone knows if there's a way to put the Macbook built-in display to sleep while continuing to work with the external display, without having to put the Macbook to sleep first. I'm thinking that there's got to be a way to do this (maybe there's a piece of software out there or some other work around?).

Thanks for your suggestion. That's actually a workaround I've used. The only problem is, the display isn't really put to sleep. The result: I still get an extended desktop and occasionally I "lose" my pointer. A bit annoying, but thus far the only solution I've come up with.

My Airplay is delivering Audio but no Video (black screen). The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop' any suggestions appreciated.

My Airplay is delivering Audio but no Video (black screen). The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop' any suggestions appreciated.

here is fix! i tried only step 1 and then restarted my computer and now it works. Choose remove All Files
Hope it helps.
https://discussions.apple.com/thread/5952624?tstart=0

Extended Desktop Mode on iMac G5

New iMac user here,
Just picked up a G5 iMac w/ 2.1 GHz. Video card is Radeon X600 XT.
Wanted to know if this will run 2 displays in extended desktop mode.
Everymac.com says that video card will, with some other firmware.
Has anyone tried this? What steps need to be done? Success rate?
thanks for any helpful hints.

It's been a month since you posted this question, so I hope you get this reply. The answer is yes! I have been using extended desktop on my iMac G5 for a while now with no problems. Do a Google search for "screen spanning doctor." Double check the supported systems, but I think yours is on the list.

Apple Aluminum Keyboard and 23" cinema Display and MacBook Pro??

Hello there
I have just purchased an Apple Aluminum Keyboard and have and MacBook Pro with and 23" cinema display, and if i try to connect the keyboard to my cinema display via USB the keyboard don't work.
i have an Apple mighty mouse that works fine wen connected to the USB port on the display...
why is it not working...

have you tried a different USB port on the ACD? Maybe the one you used was defective? I run a 7-port bus off one of the USB ports for all my hardware. OTOH, I do use bluetooth mouse and keyboard!

Macbook and the Cinema display

Hi,
I'm about to purchase a Cinema display for my Macbook, before doing so I have several questions.
In the Apple store at the Cinema display section there is told that the Apple displays are specially designed for the Mac Pro and Macbook pro's. I wonder if the displays work in the same way with my Macbook. I know that I need a Mini DVI to DVI cable. My question is if there are any disadvantages compared to the pro products. And I wonder if there are any users with experience related to the Macbook and the Cinema display.
regards,
Koen

I have a first gen macbook and a 23" cinema display. I can't compare directly to the pro products but, I am very happy with the display and how it works with my laptop. I get full resolution and a firebox/USB hub. It's pretty sweet. I would tell you that if you are about to buy a display I would hold off for the leopard anouncement, the rumor is apple will replace the current display line up.
wes

24" iMac and 20" Cinema display extended desktop mode ?

Similar Messages

Maybe you are looking for