24" iMac stand doesn't align with the body??

When I look at my 24" iMac, the unit itself doesn't align very well with the stand. I noticed that from many different angles.
It looks a little bit wired, but the unit swing very smoothly.
Does anyone has the same problem too??
Will it be better if I remove the stand and install it again?
Thanks

Welcome to the Apple Discussions.
It takes a special card that you must purchase from Apple to detach the stand from the iMac. I would suggest that if it doesn't appear to be attached correctly that you have an Apple Certified Technician check it out for you and make any necessary adjustments.

Similar Messages

  • My trackpad is not aligned with the body

    Hello Experts,
    I have a macbook pro late 2011, running on 10.8.4.
    I've noticed months ago that my trackpad seems like its been pressed so hard on the right side making is sink on the body, this makes the left side hanging abit outside the body. This get worse and worse until one day I just found an ugly crack on the upper left side of my trackpad probably from closing the macbook with a little force.
    NOTE : The trackpad is working fine, I can still click it but it is a bit hard to do so now.
    Is there anyway to fix this?
    Here's some pictures of my trackpad now.

    Well that type of thing doesn't just happen unless some one or something apply excessive force to the trackpad. That in itself cries abusive treatment. So even if you have the applecare extended warranty the cost to fix it will be out of your pocket.
    As noted the only place that can fix this type of thing is a apple store or apple repair place.

  • Why my tablix shows in design time perfect right margin alignment with the body right margin, but at runtime it diminishes its width?

    This is turning me crazy as I can't figure out how to solve this annoying problem. Could somebody help me?
    I'm using Visual Studio 2010 Report Designer.
    Thanks
    Codelines

    Thanks for the answer
    U. PARANTHAMAN but, if I do that and a field needs to grow vertically to wrap text wouldn't the text be truncated?
    Codelines

  • Images on sightseeing.html won't align with the column margins.

    All six parts of the Bayside Beat tutorial were great!!!  The only problem I had was the images on the sightseeing.html page won't align with the column margins. They won't move all the way to the left or right.  In design view they align with the margins correctly, but in Live view mode or when viewed in a browser there is a space between the margin and the images.  The space is constant and doesn't vary with the width of the browser.
    I unzipped the final version of the site to a new folder.   I viewed it in Chrome and in Explorer 11 and the images still won't align with the margins.  I'm using window 8.1 and DW CC6.
    It's not a big deal, because I learned many things from the tutoral, but I still would like to know what I'm doing wrong.
    Thanks for any help.
    Design View
    Live View

    Glad you enjoyed the tutorial videos.
    Just looking at the screenshot of Live view, I would say that the problem is you haven't set the left margin in the floatleft class to zero. The image is wrapped in a <figure> element. Most browsers add a default 40px left margin to <figure>. Setting the margin to zero in a class overrides the default.

  • I just bought a white iphone 4s, i noticed that the glass doesnt align with the speaker its a little off, anyone else having this problem?

    I just bought a white iphone 4s, i noticed that the glass doesnt align with the speaker its a little off, anyone else having this problem?

    It should work fine with Version 1.2 and Itunes 7.0 or later.
    Check the battery charge--- Make sure it’s OK
    No need to keep running the battery down..?
    Do a manual Reset on IPOD--by selecting
    Menu and Center simultaneously, for about 6 seconds.
    You may have to do this several times.
    re-try IPOD
    Make sure your Windows software is up-to-date.
    Make sure your running the correct software version for your IPOD.
    If this doesn’t’ work---
    Do the 5 R’s as instructed in the Apples manual.
    Compaq PC 6370US / 1GB Ipod Nano & 80GB Video   Windows XP   Pent 2.53 GHZ 512MHZ MB RAM 120GB HD

  • ICal Week view, Date is not aligned with the Time(schedule) of each date

    Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

    Hi,
    i omit the scheduling maergin key in material master,
    the result of MRP is
    BASIC DATES
    Finish 15.10.2009
    Start 14.10.2009
    PRODUCTION DATES
    15.02.2010 14:33:25
    14.10.2009 07:00:00
    scheduling type i planned order is still "backwards"
    so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
    this seem not right.
    it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
    Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
    Best regards,
    Freddy Ha
    Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

  • Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey

    Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

    A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
    Regards.

  • Apex report result doesn't agree with the result of sql developer

    Hello guys,
    at the moment I try to create a standard report which takes his content from several spreadsheets. Because of some problems with the searchbar I'm not able to use an interactive report. The sql query contains a function, which sets some space characters into the content of a column. But there is a big problem. When I call my sql query in apex from the spreadsheets the result doesn't agree with the result which affords the sql developer.
    I know that the sql developer affords the right result.
    best regards
    wderr
    Edited by: user9072567 on 07.02.2010 12:57

    thats the query:
    select "TWORKITEM"."WORKITEMKEY",
    "TWORKITEM"."PROJCATKEY",
    "TPROJECT"."LABEL",
    "TWORKITEM"."PACKAGESYNOPSYS",
    replace(replace("TWORKITEM"."PACKAGEDESCRIPTION", chr(10), '<br>'),'<td></td>','&lt;td&gt;&lt;/td&gt;') packagedesc,
    suche_ohne_ti_be("TWORKITEM"."WORKITEMKEY") "CHANGEDESCRIPTION"
    from "TWORKITEM" "TWORKITEM", "TPROJECT" "TPROJECT", "TPROJCAT" "TPROJCAT"
    where "TWORKITEM"."PROJCATKEY" = "TPROJCAT"."PKEY"
    and "TPROJCAT"."PROJKEY" = "TPROJECT"."PKEY"
    and (instr(upper("TWORKITEM"."WORKITEMKEY"), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."WORKITEMKEY"))) > 0
    or instr(upper("TPROJECT"."LABEL"), upper(nvl(:P10_SEARCHTEXT, "TPROJECT"."LABEL"))) > 0
    or instr(upper("TWORKITEM"."PACKAGESYNOPSYS"), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."PACKAGESYNOPSYS"))) > 0
    or instr(upper("TWORKITEM"."PACKAGEDESCRIPTION"), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."PACKAGEDESCRIPTION"))) > 0
    or instr(upper(suche_ohne_ti_be("TWORKITEM"."WORKITEMKEY")), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."WORKITEMKEY")))>0
    I mean with spreadsheets some tables/charts. And I take those informations from 3 of them.
    regards
    wderr

  • Waves plugins doesn't work with the new Logic X?

    All of my Waves plugins included in the Complete V9 bundle doesn't appear with the "upgrade" to Logic X. Even I re-installing the plugins Logic X seems to ignore them...
    Someone with this problem? Anyway to solve that?

    AndersonPiah
    For Waves v9 64bit version..
    Did you also run  the Waves AU Reg Utility 9.2 or later.. found in the applications/waves/waveshells folder?
    If not, quit LPX and run the AU reg util.
    Then, restart LPX and V9 should then be validated correctly and available in LPX via the Insert FX slots.
    Waves V9 working fine here with LPX and 10.8.4
    Salvarado,
    As zbaig stated, you need to update to Waves v9 64bit... as v8 was 32bit only and is no longer supported within Logic Pro X

  • Pop-up Menu is aligned with the top of the window in IE7

    Using Fireworks MX I created a pop-up menu on an image I
    would like to put within a table not in the top of the window.
    If I view the page with Firefox, the menu is aligned with the
    image, but if I use IE7 the pop-up menu is aligned with the top of
    the window, far from the image.
    Can anyone help me to fix this problem, please?
    Thank you

    Paperetto wrote:
    > Using Fireworks MX I created a pop-up menu on an image I
    would like to put
    > within a table not in the top of the window.
    > If I view the page with Firefox, the menu is aligned
    with the image, but if I
    > use IE7 the pop-up menu is aligned with the top of the
    window, far from the
    > image.
    > Can anyone help me to fix this problem, please?
    You'll need to place the menu in its final position in
    Fireworks, and
    then build your page around it in Dreamweaver. A better
    option would be
    to build the menu yourself from scratch. You can learn how to
    do that here:
    http://www.projectseven.com/tutorials/navigation/index.htm
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    http://www.adobe.com/communities/experts/

  • The inline line object in the header is offset in facing pages. How can I make it align with the outer margin?

    I have a Pages document with a header that contains both text and a line (a shape, inline) below the text. When I make the document two-sided (facing pages), with a 1" inside margin and a .75" outside margin, the line offsets either left or right in each section of the document. When a section starts with a right-hand page, the line is right justified on ALL the pages in the section (1" from the left and .75" from the right), even though it should be .75" from the LEFT on the LEFT-HAND pages. When a section starts with a left-hand page, the line is left justified on ALL the pages in the section.
    Is there any way to get the header  line to align with the margins properly in facing pages?

    Hi Debra,
    Click on Inspector > Layout > Section > Configuration
    Is there a tick in 'Left and right pages are different'?
    Please post a screen shot of your headers. That will help to show what you are trying to achieve.
    To take a screen shot, hold down the shift and command keys, then type 4. The cursor will change to crosshairs. Release the shift and command keys. Drag over that part of your screen then release the mouse/trackpad. A screen shot will appear on your desktop. In a reply to a message, click on the camera icon in the Toolbar above your reply and
    Choose File > Choose > Insert Image
    You may have to try this twice. Camera icon sometimes needs a wake-up call, but works the second time.
    Remove any personal details before taking the screen shot.
    Regards,
    Ian.

  • How can I make numbers align with the baseline in ordered lists with inline images?

    When I use inline images in an ordered list, the number for every line that has an inline image is offset from the baseline to align with the top of the image. Here is a screen shot from Preview mode (same behavior on real devices):
    List entries 1 and 3 are normal. Entries 2 and 4, which contain inline images, have their numbers offset above the baseline.
    I guess the line-height gets redefined based on the inline image, and then the numbers align based on line-height. Is there a way to change this within Muse so the numbers will consistently sit at the baseline even when the line includes an image? Is it something that needs to be addressed by modifying style sheets?

    Hi,
    You are correct in observing that inline objects affect line height, which in turn affects alignment of the bullet/number with the line.
    To address this, you can use negative wrap offsets on the inline (specifically top offset) using the Wrap panel: adjust the value until the inline no longer adversely affects line height.
    Hope this helps.
    Abhishek

  • Project background doesn't align with stage after rescaling project

    Hello,
    I think I discovered a bug that may or may not have been resolved in later versions of Captivate. I'm using Captivate 5 (5.0.3.631) and as much as I'd like to have a newer version, my employer only has this version purchased right now. I'm posting this here because I realize this may not be a bug and there may be a workaround, in which case maybe I can learn something!
    The issue appeared when I recently had to rescale my project to make room for a closed captions popup area at the bottom of the stage. (I don't want it to overlap previously positioned content.) Do do this, I rescaled my project to be 25 pixels taller than it was previously, and I selected the resize option to keep the already placed project contents aligned at the top left of the project rather than to scale everything to fit. Just as I hoped, this extended the stage out from the bottom by 25 pixels, much like resizing a canvas property in photoshop.
    I then edited my project background images to match the new project stage dimensions in order to cover up the now visible 25-pixel-tall strip of uncovered stage. I imported the new background image onto my master slide in the same way I placed the original one, and this is where the problem appears. The taller image, configured as a "project background", will not align with the stage anymore. Instead, it's hanging off the top of the stage by 13 pixels and not reaching the bottom of the stage by 12 pixels (adding up to the 25 pixels I increased the project height). I purposefully placed the image as a project background rather than just dragging it on the stage of the master slide. My reasons for doing so are somewhat complicated, but mainly are because I need the master slide background to not interfere with the Z-order of items on the regular slides. Apparently a master slide image on the stage of a master slide will cover up items set to display for the rest of the project. Perhaps this is a bug, too?
    Anyway, back to the problem at hand... I had everything working fine before I rescaled my project, but now the imported background image won't align with the stage. Because it's set as a project background, there is no way to reposition it on the stage... it just kind of lands where it lands. It appears that when I rescaled the project, Captivate remembered where the center of the "old" sized project was and didn't recalculate the center of the "new" rescaled project. So, when I place a larger image in the master slide (as a project background), it is centering it where the old, smaller project used to be... thus resulting in the larger image to not be centered on the stage.
    I figured out a workaround in the mean time by placing the background image on the stage of the master slide (not as aproject background), and by moving more things to the master slide that I don't want to be covered up. This actually seems to be a more elegant solution that what I had previously, but I'd still like to know if what I'm experiencing is a bug or not.

    Ok just found a workaround/solution.
    (always happens right after I ask, for some reason).
    Rescaled my project but kept the size and positions the "same and centered".
    Then I replaced all my background images with bigger versions (previously I had cropped them at the right and bottom).
    Now my backgrounds were all great, but all my objects were too low.
    All I had to do was ctrl+A to select everything on a slide, and then change the Y value for the whole bunch to zero.
    This magically placed all objects in their correct respective spots.
    Hope that helps someone out!
    Russ

  • Graph Data does not align with the axis label

    Hi,
    The graph data does not align with the axis label when
    datetimeaxis is used.
    http://livedocs.adobe.com/labs/flex3/html/help.html?content=charts_displayingdata_04.html
    (in the using parseFunction property example) when you hover on the
    line graph the values do not align on the labels. Is this a bug?
    Can somebody help me with this.
    Thank you,
    Gautam.

    Hi All
    Thanks for looking into it.
    Actually we have just added a field GJAHR (was missing in the extractor) so that it takes data accoring to fiscal yr. Actually we had a issue that the Business area for a particular vendor 'X' and doc no 'Y' was showing incorrectly (similar to that of yr 2008) but it changed this yr and the extractor was still picking Business Area for yr 2008.
    So we added GJAHR field so that it takes correct Business Area. we have checked in R/3 Extractor checker and it shows correctly.
    But that change has not reflected in BW yet even after replicating datasource.
    I hope i have made you all understand the situation.
    Thanks for your help
    Ishi

  • Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!!

    Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!! Can someone help please?

    Hello I found my answer on Settings>>Restritions! :)
    Thanks to me:)

Maybe you are looking for