24" iMac Video Card Burned

I have the 24" aluminum iMac and all of the sudden when I tried starting it up, it wouldn't do anything. It is out of warranty because I didn't buy AppleCare for it (Stupid...I know) but when I opened it up, I immediately noticed that the graphics card looked burned. Is there anything I can do besides buying a new logic board because I really can't afford that. I paid a lot for this computer as it is and it's really disappointing that something like this happened to such an expensive computer.

Sorry to hear, but unfortunately, these types of things do not last forever and are not infallible (just like hard drives or any other hardware part). Although Apple states that the graphics cards are soldered onto the logic board, I've read some posts where a user or AASP was able to just replace the graphics card, so you might want to check into that possibility (and, since you've opened it up, you might have seen the configuration). Other than that, you can have the logic board replaced or, worst case scenario, sell the iMac for parts or with the disclaimer that it needs a logic board.

Similar Messages

  • IMac Video Card in 20" and 24"

    Hello,
    I want to thank everyone in advance for posting here.
    I am deciding between the 24" and 20" iMac but will be doing the video card upgrade regardless of which system I buy.
    Can anyone tell me the difference between the upgrade options (nvidia geforce 1600 gt in the 24" and the ATI Radeon X1600?
    My primary applications of use are Final Cut Pro 5, DVD Studio Pro 4, and Adobe Photoshop CS2. I don't care about render time, except for in Photoshop.
    If anyone can help...please do. I recognize they both have the same VRAM, but if there wasn't a difference, they wouldn't be different upgrade options.
    Thanks

    Hello,
    I want to thank everyone in advance for posting
    here.
    I am deciding between the 24" and 20" iMac but will
    be doing the video card upgrade regardless of which
    system I buy.
    Can anyone tell me the difference between the upgrade
    options (nvidia geforce 1600 gt in the 24" and the
    ATI Radeon X1600?
    Actually, if you look at the specs at the online Apple store, you will see that the 20" offers the x1600 with a choice of 128 or 256MB of video ram. The 24" offers the Nividea 7300 w/128MB or the 7600 with 256. IF you are going to be doing video editing and photography, I would get the upgraded model no matter what system you get. Though it may be theoretically possible, it will be very impractible to upgrade the card later. You will need the ram,especially if you want to play any games,or get into Aperature for photo management and processing as well as CS2 also, I think it would also impact video editing as well.
    BTW, the 24" screen is great.

  • So which 27" iMac Video card to go with???

    Hey gang-
    Lucky me- my wife said that I've been good enough to ask for a new iMac this Christmas!   I'll be replacing my trusty old Mid-2007 24" with one of the new Late-2013 27" models.   To my surprise, it seems my go-to source for reviews- MacWorld magazine- has yet to publish any print review of the Late-2013 models- so I'm guessing they aren't going to.
    I know I'll be going with a Fusion Drive upgrade, but where I'm stuck is on the Video card.  Thoughts on the NVIDIA GeForce GT 755M/1GB, or the NVIDIA GeForce GTX 775M/2GB, or the mac-daddy NVIDIA GeForce GTX 780M/4GB?
    I've seen a few threads with new owners of Late-2013 iMacs already enquiring about upgrading their video cards, so don't want to underbuy.
    Any thoughts or maybe anyone found a good review since MacWorld hasn't?
    Thanks!
    Dave

    What are you going to use your new iMac for?
    That will determine what CPU and video card you need.

  • IMac Video Card Replacement

    Is there anyway to get the video card replaced in my iMac? Apple Care has expired and they replaced it just last year before it was over but it appears to have gone out again. I have a 24" Intel iMac which I purchased in Feb of 2010. I read online that it is not possible to replace myself because its sealed in but I recall when Apple replaced it last year the Genius telling me they just pop it out and replace but maybe I misunderstood.
    I'm not sure why it has gone out again we barely use it as I mostly use my MacBook. However, the MacBook also seems to be having issues with its video card.

    You will need to take it in for repair. You don't even know that the GPU has gone bad. It could be something else. If you attempt to repair it yourself, then Apple will no longer provide any future support whatsoever. Let them do the repair for you.

  • 2007 Aluminum Imac Video Card upgrade

    I asked this before but I think i didnt ask the question correct. I have a 2007 Aluminuim imac.
    I was curious if you could upgrade to the 8800 video card in the latest imac.
    Sorry I was confused.
    Tom

    Actually the answer is YES, GPU is not integrated on the motherboard, it is a removable standard MXM format GPU.
    Please check out this blog (scroll all the way to the bottom)
    http://www.amfiteatar.org/content/view/155/57/lang,en/
    A whole other issue is where to purchase an Apple compatible MXM GPU.

  • Mid 2007 iMac video card does not meet minimum requirements for latest iMovie update

    Tried updating to the latest version of iMovie and I get the following message.  "Your computer's video card does not meet the minimum system requirements."  I haven't had any luck finding what those requirements are.  What are the minimum requirements?
    Thanks.

    I'm having the same issue here too. I'm using a mid 2007 iMac 2.4 GHz Intel Core 2 Duo with 4GB of SDRAM and ATI Radeon HD 2600 Pro 256 MB.
    What bugs me is that the update shows up but you are not allowed to install it. Either one of two things needs to happen.
    #1 apple allows users to hide the update but still let you know that there is a hardware incompatibality
    #2 don't let the update show up at all

  • IMac video card is busted again. Options?

    I have a 27" iMac purchased in 2011. Since this January I've had to take it to Apple Retail Store for video card replacement twice, and now it's busted again. I don't want them to put in another refurbished card and likely break down on me in a short time. So far it's costed me 6 days without my computer which I use for work.
    My question is what options do I have to prevent having this problem again and again?
    I do get free repairs via Apple Care but I shouldn't have to deal with so much down time. I feel that I should be compensated somehow, or at least be guaranteed a new, not refurbished, video card.

    first, call AppleCare and complain in a polite manner so they can document the situation, also have them make an appointment for you in the genius bar and have them give you the case #.  Then go to the appointment and ask for a new one after you plead your case about how much you have been inconvenienced.  I think you have a pretty strong case.

  • FCP on iMac - video card RAM

    What are the benefits from boosting video memory on the 20-in iMac from 128 MB to 256 MB? I'm interested in the effect on performance while using video editing software such as Final Cut Pro. Thanks!

    Hi:
    I thought you was trying to upgrade an iMac you had, but you are getting a new one !
    Motion will be the FCS program to take great advantage from your graphic card processor. Motion is GPU based.
    The other componentes of FCS are CPU based. From FCP v5.1 you can use some of the Motion effects what means that your GPU power will help there.
    I'm pretty sure you have visited this page:
    http://www.apple.com/imac/graphics.html
    Here you can find the Motion graphics requirements:
    http://www.apple.com/finalcutstudio/motion/specs.html
    Your best option is the 24" with the 7600 GT.
    Think you'll need a second drive (external) to store your captured video.
    WHY DON'T YOU . . . ?
    Probably you'll get a better and more flexible FCS station getting an used PowerMac that you can "dress" with better options to use FCS: second internal fast drive, graphic cards, etc.
      Alberto

  • 24" iMac Video Card difference

    Hello,
    Is there a noticeable difference between the NVidia 128mgs and 256mgs cards - specifically while gaming - as to how the graphics show on the screen?
    Thanks.
    Jen

    The 7600GT/256 will give you much better 3D
    performace than the 7300GT/128. Especially in the
    high-end 3D games when maxing out the screen res.
    Would definately go for the 7600 if you're a gamer.
    lenn
    Thank you Lenn. I already have the 128 (unfortunately) and I notice a difference between my MacBook Pro with the ATI 256 and my iMac with the 128. I play WoW.
    So now the question is, is it worth it spending the money to get the 256mgs on the iMac? And what do I do with my current 24" iMac. Such dilemas...lol
    thanks for your quick response.
    Jen

  • Question about iMac Video Cards and Video Ram

    I'm trying to decide between two 2012 iMacs. I'm buying it to run Adobe Premiere Pro, and After Effects, to edit and render 1080-720p video footage. The cheaper Mac has NVIDIA GeForce GTX 675MX graphics processor with 1GB of GDDR5 memory. The higher end one has, NVIDIA GeForce GTX 680MX graphics processor with 2GB of GDDR5 memory. Most importantly, is the extra GB of Vram worth it? Secondarily, is the GTX 680MX(vs. 675MX) worth it? I'm trying to keep it cheap, so unless there's a notable difference, I need to go with the first one. Thanks for the help!

    mostly video memory is used to hold textures for fast blittering when one run fullscreen 3d games 2d image program and video edit programs does not really take advantage of more video memory then they need to hold the back buffer of the screen which is pretty much just horizontal amount of columns multiplied by vertical lines multiplied by 4 as in the 4 bytes used by the colours

  • IMac video card upgrade

    Hi, I recently bought a 21.5" iMac and was wondering if I could upgrade the "AMD Radeon HD 6770M with 512MB" to a 1024MB one.

    Marlon,
    It's not really meant to be upgraded.  It might be physically possible, but that would be a risky proposition, and if anything breaks your warranty won't cover it.
    How long ago did you purchase the iMac?  You have 14 days to return it.  If it's been longer than 14 days but not too much longer, you might want to go to the store where you purchased it and see if they would be willing to exchange it.  They might work with you if you are upgrading and spending some more money.

  • I created a slideshow using lightroom3 with music at 1070p, then put it to both a CD and a DVD.  I cannot play either back on my iMac.  It is jumpy and unusable on playback.  Different Video card needed?  Any Help?

    I created a slideshow using lightroom3 at 1070p with music.  After transferring the slideshow to a DVD I could not play it back on my iMac without a lot of skipping.  Any ideas? Different Video card??

    As I said, I've not used Lightroom (and I tried to find some info on the Adobe website, but they like to make it difficult to find things - the only thing easy to find was the "buy" button LOL).
    I get some pretty good quality - and actually reduce my videos from 1080 to 720p because of the enormous file size, rendering time required, and the fact that I simply cannot tell the difference on my 42" HDTV. My workflow is: create a slideshow in Photo to Movie (I've found that superior to anything else I've tried), add that to my iMovie project (in between video clips, etc), add transitions, titles, or whatever. Export at the highest settings (experimented with different settings on a 30 sec clip) to desktop. Fire up iDVD, customize a theme/menu with videos, music, stills and then add my movie(s). Encode there to highest quality, create a Video TS folder (which will include all the files necessary so you can delete the originals if you want) or burn from there. If I do the folder method, I use Roxio Toast to burn it at the slowest speed available.
    Using that workflow, my movies rock (if I say so myself  ) and have a great quality. And I've never had a coaster.

  • Video Card and DVD Burner required

    Hi,
    We are in the process of trying to build a preliminary Sun Solaris 10 machine that if we get everything to work, we will start to build more units for our customers. We took a look at the Sun Solaris HCL list for parts and our resellers are having trouble finding some parts because they are out of date. We need to find technology that will be around for a while. For that reason we have decided on a Motherboard with Intel processor and PCI-E support instead of AGP. Trouble with PCI-E is the HCL list has limited options and were unable to find the parts online.
    Can anyone recommend some recent PCI-E video cards?
    Also can anyone recommend some recent CD/DVD-RW burners?
    If this is not the place to ask these questions could you please let me know where to go?
    Thank you.

    Cornelia,
    Lennart's links are very good and informative. But one thing you should know is that an external DVD burner will not play a DVD - it only burns them. Since you want to view the DVD and pause at a particular scene and print it, you'll need some way to view your DVD. You also need a way to convert the iMovie project with the imported VHS footage, to a burnable format. iDVD can do that, but I noticed you have OS X 10.2 (Jaguar). If you don't have iDVD you'll need to buy it from the Apple store.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/70901/wo/u13Sbz1 DQJRc2kZnHbi1QKZybZA/1.0.19.1.0.8.25.7.11.0.3 or you can buy Roxio Toast 7, but toast is much more expensive. For Toast go to: http://www.roxio.com/
    You also need a media player so you can view your final DVD. I did some quick research and found out that none of the free media players allows you to print - which is what you want to do. There are quite a few free media players available, like Nice player and Xine Player, but you need Panther or higher to use them. Because you're running OS X 10.2, the only free media player that you can use is VLC media player. To download a free VLC player go to: http://www.videolan.org/vlc/ You do need QT 6.5.2. or higher. So you may need to update your QT.
    You can't print a paused image, but you can take a snap shot of the still image, then print that. Snap Shot=CommandShift4. This will allow you to select the paused picture in the screen, or if you like just a portion of that paused picture. It will save on your desktop as a picture. Double click on the Picture, then print that.
    Then it sounds like after you've burned the DVD with your titles, you will need to connect a VHS recorder to a DVD player and record your DVD on to VHS tape.
    Good Luck,
    JAM
    iMac G5 2.0 GHZ 1.5 RAM, 250 internal HD, 160 ext. HD   Mac OS X (10.4.1)  

  • Video card question for new iMac

    Howdy all,
    I'm about to order a new BTO iMac, and I'm wondering if somebody could give me feedback on the two different video cards available.
    Cost is not really a concern here (I would rather spend more on the video card and cut back on something like RAM for now because RAM can be upgraded later). My main concern is performance and the best image quality.
    I understand the NVidia would be faster for 3D gaming than the ATI - which I would use a little bit. So the NVidia would seem to be a no-brainer.
    However, I've heard a couple people (on various forums) state that although the NVidia is definitaly faster for gaming - it performs slower than the ATI at some tasks like iMovie and iDVD tasks and text scrolling and motion are not as good.
    For me, I would love to have the faster 3D gaming speed of the NVidia for the few times I do game...but the most important thing to me is image quality for things like photo and video editing, working with documents etc. Are any of these thoughts regarding the NVidia vs ATI true?
    Does anybody have any advice regarding the performance these two cards? Any help would be really appreciated. Thanks!
    Sully

    I had the 20" 2.16 (late 2006 model) with the x1600 128MB and now have the 24" 2.8 2600Pro 256MB and 2G stock RAM. It's night and day with Call of Duty 2. I am able to play COD2 in 16:9 mode, all graphic settings max'd out and the fps? Wow! One most maps it ranges between 190-270fps! That smokes the previous version of 40-90fps. One the most complex maps my 24" drops to 90-110 range. Seriosuly, anything above about 60fps is perfectly playable! I'm thrilled with the stock card. However, COD2 is older, I play it native in OS X and do not game in boot camp. That may change a few things.

  • 24" iMac--latest models. Which video card option to choose?

    I am going to buy a new iMac 24" with 4 GB RAM. There is a $300 difference between two of the models, based mainly, so far as I can tell, on a processor speed difference of 2.6 to 2.9 Ghz, but mainly on the video card.
    The lower priced iMac has a NVIDIA GeForce 9400M with 256MB of DDR3 SDRAM shared with main memory
    The higher priced iMac has NVIDIA GeForce GT 120 with 256MB of GDDR3 memory
    I use my current iMac (mid-2007 version, 4 GB, Radeon 2600 HD with 256 MB VRAM) for all the usual things like email, word processing and web surfing, but also for watching movies, high def streamed TV, including sports events. I do not do video editing nor do I play games on the computer. I am using approx 1 GB of RAM all the time for Fusion to run Windows, since I have a couple of programs that have no Mac equivalent.
    Am I losing 256 MB of system RAM with the GeForce 9400M since it doesn't have its own memory like the Radeon 2600 HD, and will I miss the memory? Is the GeForce still a better video card than the Radeon, even with the shared memory?
    The only real question is, should I spend the extra $300 to get the video card with its own memory, assuming I don't need the faster processor speed?

    _+The only real question is, should I spend the extra $300 to get the video card with its own memory, assuming I don't need the faster processor speed?+_
    I see from your new thread today that you have not yet made this purchase.
    To get the upgraded hardware you really want, and for only $50 (not $300) above the cost you're willing to pay for the new 2.66, you can buy the refurbished 2.93 current 4GB RAM model direct from Apple, and it will have exact same warranty (and be treated by Apple) as a new one.
    While it is not in today's list of refurbs at the online Store, it was there Monday - simply call now and they will put you on the waiting list for a refurbed MB419LL/A @ $1,549 w/ free shipping, and you will have it in a week or two. Just a few days extra wait for the model of your dreams, and yes it will come with Snow Leopard:D

Maybe you are looking for

  • SBWP: The content of message is not display

    Hi, The user use SBWP inbox. There the message is not display the content of the message. There I uninstalled and install again the SAP GUI and Windows, but there has been the same. Only the head of message is displayed. There can only print the cont

  • Line Chart Ignoring Series That Starts With a Null Value

    I have a flash chart that was working fine until APEX was upgraded to 3.1 The chart is 2D Line. Each series represents a discrete year (2006, 2007, 2008 etc.) and the X-Axis is the month (Jan to Dec) and the Y-Axis is the sales amount for that month.

  • Can You Daisy Chain Firewire 400 and 800 Mixed?

    I would like to purchase an External Drive. I'm looking at a FW800. What I'm wondering is, Can I daisy chain devices mixed in. I Want to run a FW800 Bilingual cable from my Powerbook to the External Enclosure. From the Ext. Enclosure, I'd like to hav

  • Projects vs. Public Sector

    Users need to add Projects into Planning.  I know they can if they create a Application Type "Projects Financial Planning"... The problem is we are developing a "Public Sector" Application Type. What are the ways I can move metadata, "new Projects",

  • How to create sub-column in the report

    Hi there, How can I create a report with one column having 3 sub-columns? column head column1 column2 column3 Thanks