24" TV with VGA and HDMI and speaker connection?

Bought a 24" LED TV that has VGA input. Two to three inches to wide for a monitor, but got this one because of price and the VGA input. It also has a HDMI input. Previously when doing a search for TV with PC input the results would bring up listings that did not have PC input listed in the specifications. So much for search engines.
Would I be better off using HDMI input instead?
Wide screen is nice but not so much for monitor use. Everything is stretched horizontally on monitor. Have not yet found a setting to make this wide screen not be so wide for PC usage.
The manual shows, a picture, to connect PC speakers to monitor and another cable from PC to TV. Do not even know what size the jacks should be for cable. What cable should I be looking for?
Any other advice and experiences would be appreciated.

Hi,
LED TVs are digital and the best video display is going to be using a digital signal.
The techncial specifications for the TV should inform you what digital resolutions that the TV will accept.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

I need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

i need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

I would suggest you visit an Apple dealer, preferably an Apple Store if there's one in your city, and ask for assistance in determining what you need. The questions and issues you bring up are rather complex to address in a technical support forum and would be better addressed in person where you and the salesperson can ask questions back and forth to arrive at the optimal setup.
Regards.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

No I can not turn on the wifi either. I can get on the web on my phone and Facebook etc on phone but no wifi or hotspot

Does the MEX-BT3100P use the same power and speaker connection plug as the x-plod?

does the MEX-BT3100P use the same power and speaker connection plug as the x-plod?

It would be best if you can also provide me the complete model number of the Xplod unit for comparison.

I have purchased VGA adaptor & HDMI adaptor to connect ipAd1 to a TV - it will not. Help please

I have purchased VGA adaptor & HDMI adaptor to connect ipAd1 to a TV - it will not. Help please

Only certain apps that had this feature added will show from an original iPad to a video out - whether VGA or HDMI. It does not have true mirroring, like the iPad2 does.

Connecting two Acer monitors with VGA and DVI output to my Macbook Pro (mid 2010)

Hi All,
I need to connect 2 Acer monitors that have both VGA and DVI ports to my MacBook Pro. What's the best way to do that?
Thanks for your help!

hey! Thats normal for notebook! That actually happens to almost all of us - as there are a small fraction of people with two and more thunderbolt displays or with newest rMBP and external multi-monitor setup.

Performance with MySQL and Database connectivity toolbox

Hi!
I'm having quite some problems with the performance of MySQL and Database connectivity toolbox. However, I'm very happy with the ease of using database connectivity toolbox. The background is:
I have 61 variables (ints and floats) which I would like to save in the MySQL-database. This is no problem, however, the loop time increases from 8ms to 50ms when using the database. I have concluded that it has to do with the DB Tools Insert Data.vi and I think that I have some kind of performance issue with this VI. The CPU never reach more the 15% of its maximum performance. I use a default setup and connect through ODBC.
My questions are:
1. I would like to save 61 variables each 8-10ms, is this impossible using this solution?
2. Is there any way of increasing the performance of the DB Tools Insert Data.vi or use any other VI?
3. Is there any way of adjusting the MySQL setup to achieve better performance?
Thank you very much for your time.
Regards,
Mattias

First of all, thank you very much for your time. All of you have been really good support to me.
>> Is your database on a different computer? Does your loop execute 61 times?
Database is on the same computer as the MySQL server.
The loop saves 61 values at once to the database, in one SQL-statement.
I have now added the front panel and block diagram for my test-VI. I have implemented the queue system and separate loops for producer and consumer. However, since the queue is building up faster then the consumer loop consumes values, the queue is building up quite fast and the disc starts working.
The test database table that I add data to is created by a simple:
create table test(aa int, bb char(15));
...I'm sure that this can be improved in some way.
I always open and close the connection to the database "outside the loop". However, it still takes some 40-50 ms to save the data to the database table - so, unfortunatly no progress to far. I currently just want to save the data.
Any more advise will be gratefully accepted.
Regards,
Mattias
Message Edited by mattias@hv on 10-23-2007 07:50 AM
Attachments:
front panel 2.JPG ‏101 KB
block diagram.JPG ‏135 KB

WLS 5.1 with SP11 and Sybase connection pools

I had posted back in January about an issue with WLS 6.1 and Sybase connection
pools (see posts 12040 - 12043). This issue has now appeared in WLS 5.1 with
SP 11. I have backed out SP11, but I'd take advantage of the clustering enhancements
in this SP. Any suggestions? Would it be possible to get another one off patch
for SP11?

Could you fill me in as to what problem you were having. We are also using
Sybase with WLS5.1 and experience intermittent truncating of resultsets.
Regards,
Garvin LeClaire
[email protected]
"Pete Auriemma" <[email protected]> wrote in message
news:3c8669ee$[email protected]..
>
I had posted back in January about an issue with WLS 6.1 and Sybaseconnection
pools (see posts 12040 - 12043). This issue has now appeared in WLS 5.1with
SP 11. I have backed out SP11, but I'd take advantage of the clusteringenhancements
in this SP. Any suggestions? Would it be possible to get another one offpatch
for SP11?

Problem with mouse and speaker icon

When I move the curser around a page, a semi transparent speaker icon often shows up with a faint sound then slowly fades out. It sometimes momentarily freezes the screen until the sound icon is gone, as if the system had suddenly run short of memory. What can this be due to ?
Power Mac G4 Cube Mac OS X (10.3.9)

The cable seems to be fine. Actually I tried the mouse in the other port and in another computer and I have no problem at all.
I have to plug it in the left side because I am lefty.
But... the same thing happens with my powerbook (and the MBP). This behavior started after I upgraded to 10.4.5

DDTS-100 Decoder and Speaker Connections

Hi,
I was thinking of purchasing the Creative Decoder DDTS-100 product, but I was just wondering if anyone could answer some questions about the connections on the back of the unit first.
I already have all the necessary speakers for a 5.1 setup including the Sub, however the connectors for all these speakers are of the two-wire variety (one red, one black), as opposed to the standard 'phono type' connector. Does the Creative Decoder DDTS-100 have the facility to accept the two-wire connection and if not, is there any way to convert the speaker cables into compatible formats for this device? Also, how do non-Creative speaker products WITH the Phono Type connector connect to the DDTS - from the pics of it I have seen, the surround speakers seem to connect via 3 cables on the back of the Switch Box? I'm lost!!
Many thanks in advance!

I dont know if its said, but you need an amplifier for those speakers. The DDTS does not amplifies the signal, like those that came from Creative. The amplifier is in the sub's box.
Another thing that you need is the proper adaptor between de DDTS outputs (green, blak, orange) 3.5mm male to, whatever your amplifier uses.
In my case, i have trouble finding that cable or cables to convert to RCA. You can use 2 regular stereo adapters for the first 4 channels: green = Left and Right front speakers, black = Left and Right rear speakers.
For the other 3 channels (Center, Rear center, Sub) you can only use adapter, hence the difficulty. I tried with made for digital cameras (Left-white, Right-red, video-yellow) but it only work partially. I can't get sub from the yellow cable (the other 2 works perfect). I only get subwoofer sound when you preform noise test (from the DDTS).
Anyone any idea?

Very Loud Hum Even With Isolator and Nothing Connected

I have a Creative 6.1 6600 speaker set.
The speaker power supply is hooked up to a very nice 4-level isolator.
NOTHING is hooked up to the subwoofer other than the power cable and volume control.
Yet when I turn it on, the hum is still loud enough to be heard everywhere in a fairly large house.
I've almost given up hope on the issue. I've ran out of ideas and am ready to just throw the woofer out as being broken. Any final suggestions before I scrap it entirely?

If it's humming that loud with nothing but the power and volume control hooked up, then it is probably bad, and you should check into either warranty service, or a new set of speakers. Sorry.
Good luck!
Dale

[SOLVED]problem with GNOME and wireless connection

Hi!
I'm new to Arch Linux, and have run into a few problems after installation.
My computer is a HP Pavilion dv6000.
I installed using "xf86-video-nouveau" driver, as i understand this is the best choice for "Nvidia Geforce Go 7400". Is it?
I also installed the complete "gnome", "gnome-extra", "gdm", "gnome-tweak-tool" and "gnome-shell-extensions" packages, but when I boot into gdm login, it automatically starts in fallback mode (the one who has "applications" and "places" in the top panel instead of "activities". What am I doing wrong here?
Btw, when I go to System settings - system info - graphics, there are three lines; "Driver", "Experience", "Forced Fallback Mode". "Driver" line only says driver, and is blank after. "Experience" line says "Fallback". "Forced Fallback Mode" is set to OFF.
Also, I cannot figure out how to get my wireless network set up correctly.
When i open System Settings - Network, I get an error saying System network is not compatible with this version.
Any help with this woill be greatly appreciated!
$ iwconfig
lo no wireless extensions.
wlan0 IEEE 802.11abg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
eth0 no wireless extensions.
Last edited by pkuvaas (2012-01-18 21:57:46)

pkuvaas wrote:
Thanks!
-dri driver worked. But if the NVIDIA driver works better, I should probably consider using that one.
I tried to install the NVIDIA binary driver, but when i tried to run
# chmod -X NVIDIA-Linux-x86-290.10.run
# ./NVIDIA-Linux-x86-290.10.run
I got a message telling me to close x first.
How can I do this?
Ho ho ho buddy, I see you're trying to install the nvidia driver from the website. Have another look here:
https://wiki.archlinux.org/index.php/Nvidia#Installing
the drivers are available through pacman Installing the driver through pacman will automatically take care of removing things that conflict and installing things you need to ge t the NVIDIA driver to work.
NVIDIA _might_ be better, 3d support in nouveau is still somewhat experimental and nouveau doesn't have all the power management features yet. It'll be something to experiment with. Have a good read of the NVIDIA and NOUVEAU wiki articles
pkuvaas wrote:
As for the wireless issue, I googled around a bit and found that the driver I need is ilw3945.
I added this to /etc/rc.conf:
DAEMONS=(...ilw3945...)
as it seems the drivers are included in udev.
However, when i try to open System Settings -> Network, it says
The system network services are not compatible with this version.
So I'm getting a little restless to find out what I can do to get the wireless network configurated properly, and how I can do it.
Any ideas?
First I think you've fundamentally misunderstood something. Drivers for linux come in module form, not in DAEMON form. A DAEMON is an application that runs in the background (sound server, network service, etc etc).
ilw3945 would have to be added to your MODULES section in /etc/rc.conf if that is the module you need.
humor me and post the output of this command:
$ lspci

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

Issues with iPhone and Android connecting to Lync 2010?

Our environment currently consists of a single Lync 2010 instance, which is currently performing all roles. The current challenge I'm running into is connectivity to iOS and Android devices not wanting to cooperate. Currently, Lync is using a certificate
issued by a local CA. The CA root certificate has been imported to the devices that are having trouble connecting, and I've done this via email import without success, as well as using the iPhone Configuration Utility. In all tested instances, an error that
"the certificate can't be verified" is displayed that prohibits a user from establishing a connection. All domain workstations and remote users that import the root CA have no issues connecting.
I can't seem to figure out what's going on here. Has anyone run into this? This is a quasi-test environment in my lab that I'm testing with a few other people, and as much as we've tried, can't seem to figure out the issue. Any ideas?

To confirm that the certificate has been installed successful do you have a corporate website that is available externally that uses a certificate issued by the CA in question? If the answer is yes I would browse to that site on the phone and see if you
get an error. The Lync mobile clients don't give you a heck of a lot of information for troubleshooting. This will rule out a certificate issue.
Next thing would be your reverse proxy. Are you using ISA server? Test the reverse proxy rule by browsing to the Lync mobile auto discover URL - https://lyncwebexternal.domain.com/Autodiscover/AutodiscoverService.svc/root
Assuming ISA also make sure the rule is configure correctly -
http://technet.microsoft.com/en-us/library/hh690011.aspx
http://blogs.technet.com/b/nexthop/archive/2012/11/19/configuring-reverse-proxy-for-lync-server-2010-mobility.aspx
Let me know what the results are of those tests.
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

24" TV with VGA and HDMI and speaker connection?

Similar Messages

Maybe you are looking for