2400 Scanjet flatbed scanner software

Hello,
I recently got a 2400 Scanjet flatbed scanner from a friend but I don't have the CD which contains the software needed for installation so I was wondering is it possible to download this from anywhere?
Thanks!
Fiona

Hi Fiona,
Is this what you want?
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&product=297430
Regards
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Similar Messages

HP Scanjet 200 Flatbed Scanner

1. Product Name & Operating System:
HP Scanjet 200 Flatbed Scanner
Windows 7 Ultimate
2. I am using a HP Scanjet 200 Flatbed Scanner now before user of this system used windows xp, but i am suitable with 7 only so i have changed the os and now the scanner is not working, i have installed the cd given with the scanner successfully and the icons also appeared in the desktop but i am getting an error as follows :
The HP imaging device was not found. Try the following steps. After each step, try scanning again.
- Turn off and then unplug the device, wait 60 seconds, and plug in and turn on the device.
- Make sure that the device's power cord and cable are properly attached, plugged in, and the device is on.
- Reboot the computer.
- Uninstall and reinstall the device.
- Reinstall the HP photosmart software that came with the device.
Show extended error information.
So now tell me how to solve this issue i tried all the above instructions but no response from the device but the device is working with another PC next to me. But that was a different department i want this scanner to be working in with my system, help me to solve this issue by online chat or by a call from your representative contact me @ 8148945988 Suresh Kumar

i also facing same problem .kindly guide me

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot). It also does not show up in the ;ist of pritnters, scanner when I open Image Capture. I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below: Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

Mac Mini using OS X Tiger does not see my HP Scanjet 4670 scanner! HELP!!!!

I have an HP Scanjet 4670 scanner which worked fine on my pervious mac which was an emac with OS X Panther.
However, I now own a G4 Mac Mini running with OS X Tiger and recenly tried to use my scanner with it for the first time only to get the message: "scanner not found" I then went straight to my System Profiler to look at the USB Device Tree and was shocked to see that all my USB devices show up EXCEPT my scanner!
Mechanically, the scanner appears fine (even when I run its 'Hardware Test') but no matter what I do I cant get the Mac to 'see' it. I have reinstalled the HP scanner software old AND new, but to no avail. Although, I'm sure that even with NO HP software on my Mac, the System Profiler should still be detecting a USB device on its tree.
Just out of curiosty I connected my scanner to my old emac (my girlfriend has had it for a few months now) and it has the same problems there too!! WEIRD OR WHAT? The emac is STILL running on Panther - although during the months AFTER I gave it to my GF there has been some minor OSX Panther upgrades installed.
Is it just coincidental bad luck that my scanner became faulty when I changed mac and operating systems? Or is there an OS X Tiger problem lurking somwhere here?
PLEASE PLEASE can someone offer suggestions!!!!????? It is a lovely looking, decent scanner which was not cheap to buy and is only under 2 years old!!!

Looks like you're using software for this scanner that was for Panther only.
Try downloading HP's version of the scanner's software for Tiger.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&cc=us&lang=en&dlc=en&produ ct=303641&os=219
And run software update to make sure you're running the latest Tiger update.
If you're already doing this, or it still doesn't work, it could be a damaged USB cable (as your girlfriend Panther system doesn't see it either).

HP scanner software crash

I have a HP Scanjet 4850. Scanner software crashes as it reaches the final part of the scan. The scanner has become temperamental gradually since I bought it new one and a half years ago. Problems include software unable to intialize, the mouse becoming 'jittery' then freezing and the programme crashing. I have reset the scanner, uninstalled and reinstalled the software, checked cable connections and used a different computer USB port to no avail. Scanner software is Scan Pro 8.4. I have also ask for help in the HP scanner forum but no replies.
Grateful for any suggestions!

Helllo Clea Rees and anyone who can help,
HP support suggested I do an ordinary uninstall, repair permissions then download software from their site. This was unsuccessful. I then tried a manual uninstall, using instructions provided by HP, and re-installed with software from HP site. Again unsuccessful. Maybe try with software from CD?
Decided to check console and system logs after a scanner crash. Below are some system logs with repeats taken out:
May 20 10:21:31 Gigi-G5 crashdump[199]: HP Scanjet Manager crashed
May 20 10:21:32 Gigi-G5 crashdump[199]: crash report written to: /Users/gigi/Library/Logs/CrashReporter/HP Scanjet Manager.crash.log
May 20 10:21:36 Gigi-G5 kernel[0]: USBF: 82. 56 AppleUSBEHCI[0x1fe0800]::UIMCheckForTimeouts - Async USBCMD and USBSTS not synched ON (#20)
May 20 10:21:58 Gigi-G5 kernel[0]: USBF: 103.220 AppleUSBEHCI[0x1fe0800]::UIMCheckForTimeouts - Async USBCMD and USBSTS not synched ON (#41)
May 20 10:21:59 Gigi-G5 kernel[0]: USBF: 103.983 ControlTransaction: control packet 1 error 0xe0004057
May 20 10:21:59 Gigi-G5 kernel[0]: USBF: 104. 84 [0x2053400] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x4b000000)
The last report about "The IOUSBFamily is having trouble enumerating a USB device" - does this mean there is a USB problem? I have 'Googled' this report and a lot of people have this problem with various devices plugged in to the USB. I didn't find a report about scanners. Through lack of technical expertise I had difficulty understanding problem solving suggested, also wondered if these suggestions relevent to HP scanners.
Grateful for any suggestions

Photoshop CS5 not recognizing EPSON 2450 flatbed scanner

I am on a MacPro....OS X 10.6.8. I am running Adobe Photoshop CS5. I need to be able to run my EPSON 2450 flatbed scanner through Photoshop. But when I go to File > Import > it's not there. Please explain where I can find the TWAIN plug-in, where to laod it and how to make it so it shows up under, "Import" so I can operate the scanner through Photoshop.

Scanning with TWAIN has become increasingly buggy.
Why not just use the Epson scanner software that came with the scanner?
That way you can continue to use Photoshop while using Epson to scan.
There are more features available from Epson than with Image Capture.
However, if you feel the need to use TWAIN, here is the link for Mac CS5 plugin.
Five seconds with Google would get you this:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4904

Saving files as Black & White Scalable or Windows Meta File using hp scanjet 4570c scanner

I have a hp scanjet 4570c Scanner that I need to be able to save or convert scans to Black & White Scalable or Windows Meta Files to use with our Engraving Machine. We had a hp scanjet 4400c that used Precision 3.1 Software and it could save a scan as Black & White Scalable. It was perfect for our Engraver until the scanner went bad. Our 4570c doesn't have an option for that. Help !

Hello Jimbo6710,
I see that that is your first visit on the HP Forums. Please let me take a moment to say "Welcome".
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some issues when attempting to save scan's to black and white.
What is the operating system on the computer you are using ?
Which Windows Operating System am I running?
Are you attempting to use HP software to do the scan's?
Write back when you have time and i'll be happy to help.
If I don't hear back from you today, I hope you have a Great Monday.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Hp Scanjet 8270 scanning software keeps giving an error and closes

I have had my HP Scanjet 8270 for several years and works great. I recently reloaded my hard drive and as usual I go to the HP website and download the HP Scanjet Full Feature Software and Driver. Everything installs fine and says drivers were installed successfully.
When I open HP Scanning (8200) series shortcut I can select the type of scan I want and hit scan. Then I get the Save to file save options box and click OK. Then the scanning preview box comes up and then after a few seconds I get the error
"HP Scan Application Resources has Stopped Working." Then is gives a button to close program.
Then an error box comes up and says "An error occurred with the HP scanning application. Try the following steps. After each step, try scanning again.
-restart the program
-reboot the computer
-Reinstall the HP Photosmart software that came with the device.
Then at the bottom it says:
Show extended error information. When I click on it it gives me:
8, [ (4, 0, -2147023170) ]
The steps I have taken to resolve the problem :
I have restarted the software many times.
I have rebooted many times.
I have reinstalled the software many times.
I have run the HP Print and Scan doctor many times and it finds nothing wrong.
However, when I go to Devices & Printers and click on the scanner I can scan fine through there. Although it does not let me do anything fancy such as scan to pdf which is very important for me.
I have read many forums and tried several things from them to no success.
I did read somewhere that you need to go to msconfig and starup tab and look to see if the Digital Imaging monitor is running and it is not. I would assume that is downloaded with the software and re-downloading does not do any good.
Pleas help I'm in serious need of using my scanner. Thanks.

We had the same EXACT problem, but i have found a solution!
Unplug the scanner
remove the following
1. HP OCR Software 9.0
2. HP Scanjet G4000 series 9.0
3. HP Solution Center 9.0
4. HP Update
then restart
Download the following ( it is the NEW updated full programs with driver)
ftp://ftp.hp.com/pub/softlib/software8/COL17370/sj-50004-1/setup_full_G4000.exe
During installing, select "Advanced" and “Custom” installation
At beginning of the installation, it gives you to 2 options
I) Yes, Check for updates
II) No, I prefer to do it myself--Select this option and click on next
Immediately in the next window, you will have long list of software with the
empty check boxes beside them. DO NOT select (check) Hp update, check rest of
them and click on next to continue the installation.
During the installation process it asks to connect the scanner to the computer,
now connect the scanner to the rear end USB port of the computer and click on Ok
to continue the installation.
Worked perfectly for us!( thank god it was going out the window )
Hope this helps everyone

Windows 7 driver for Scanjet 6300c scanner

Anyone have anything on a suitable replacement driver for the Scanjet 6300c Scanner for Windows 7 ?

Would you help to suggest any driver software for hpscanjet 6300c in my windows 7 pc

HP Scanjet 4600 Scanner series *.exe file

I have an HP Scanjet 4600 Scanner series flatbed scanner that I have been using literally for decades, love it! I'm on Windows Vista 32.
Problem: I can only open it through Photoshop elements. When I try to open it on its own (HPScanjet.exe) I receive the following error message:
An error has occured in the script on this page.
Line: 1480
Char: 1
Error: The specified module could not be found
Code: 0
URL: file:///C:/Program%20Files/HPScanjet/HTML/Center/html/index.htm
Do you want to continue running scripts on this page? yes/no
When I click on either yes or no an "HP Scanjet Check" dialog box opens that is totally blank. I checked the URL, which does exist, but the "index" folder is empty.
I have a need to open this scanner on its own.
Thanks for any assistance you may give
David

I do have the original setup disk but Vista hadn't been developed at the time. The latest OS on the disk was XP. Should it work if I reinstall on Vista?
Appearantly I'm not alone with this problem, of the 3 queries on this scanjet 2 of us experienced this.
Thanks

HP Scanjet G4050 scanner

I have a HP Scanjet G4050 scanner attached to my iMac and is not responding. I reinstalled the software. Any idea what could be happening?

Hello Ferquin,
There is an update available for this model if you have not already done this. I've included the link below. Do you recieve any error messages? If so, I''ve also included another link below that may assist with this. Good Luck!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=3236374&prodTypeId=15179&prodSeriesId=3236371&swLang=8&taskId=135&sw EnvOID=219
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc =us&taskId=110&prodSeriesId=3236371&prodTypeId=15179&supportTaskId=43478
I work for HP but my posts and replies are my own....Thank you!

HP Officejet Pro 8600 Plus Scanner Software

Hi,
I'm a big fan of HP products. My last several printers, scanners and computers have all been HP.
I recently purchased the HP Officejet Pro 8600 Plus to replace an older machine with similar capabilities (ADF, duplex printing, etc). The previous machine was also an HP printer.
The problem that I'm having is that the software seems to have been downgraded. The software on my previous machine had the ability to automatically parse pictures laid on the flatbed scanner into individual JPGs. With the software on this machine, it seems that I need to manually crop each image. The options for optimizing each image, by removing scratches, automatically adjusting color, sharpening, etc. are all gone.
I really miss these features. I did find that I had been using a 'Basic' version of the software. I installed the full version and found it slightly different, but it still lacks the automatic image selection and image tweaks that I made such heavy use of.
Is there any way to get these options back?
Thank you,
--MrXmas
This question was solved.
View Solution.

NeonSkeleton,
That is unfortunate. It's a **bleep** nice machine except that the software is really a step backwards.
Is there any way to use the older software from another HP device? The standard microsoft scanner drivers don't do anything towards my need. The network connection seems to be a stumbling block for most of what's out there. I'd be happy to hard-wire via USB if that could get me the software upgrade (the speed over USB is a considerable improvement as well).
If it isn't possible to use another HP driver, do you have any recommendations for 3rd party drivers?
Thanks for your help,
Jim

Old SCSI film scanner vs modern flatbed scanner?

I have just "inherited" a Nikon LS-10E dedicated film scanner (SCSI, +/- 10 years old).
Is this worth even fussing with if I have a modern flatbed scanner (4800x9600) with modern software?
I intend to use digitize color slides.
Thanks for your time!

SCSI - what's .... - just kidding. Go here http://en.wikipedia.org/wiki/SCSI and you can see the various specs for SCSI and the bandwidth. Since USB 2.0 and FW400/800 appear to be faster then I would donate, toss, doorstop, the old scanner.
With the USB and FW the interface is easier - no device id's etc.
MJ

HP 7400c scanner software only works on initial admin account

I have G4 desktop on which I am setting up individual accounts to use an HP 7400c scanner. Now, the very first admin account I used to set the machine up and from which I created all accounts works perfectly with the HP provided scanner software drivers and programmes (HP Precision Scan Pro 3.3). However, when I log in as one of the other users (regardless of whether I have made that user an "admin" or not), the scanning programme crashes.
This seems like some kind of permissions problem, and while I have played around with changing permissions and so on, the same thing keeps occurring. I also tried installing the HP scanner software in a local user's application folder -- but the HP disc won't allow this: one can only proceed with installation of software by entering an admin user name and pwd, and the disc seems only willing to install the application in the main top level Applications folder.
Any suggestions and help would be greatly appreciated.
Thanks
Shankar
G5 Desktop, G4 Desktop, G3 Ti PB Mac OS X (10.4.6)

I retract my question. It wasn't a permissions problem after all.
Not surprisingly, the problem turned out to be
the HP software which set up a Scanjet manager as a login application on those sub-accounts, leading the actual Precision Scan application to crash. Removing that from the login items in the Accounts preference pane solved the problem. Now, I simply have to figure out how to make the machine scan when I want it to do an OCR!
Shankar

Multi scanner software not working after E71 FW U...

Multi scanner software not working after E71 FW Update to 3.1

Nice bit of trouble-shooting. Thanks for sharing the final solution.

2400 Scanjet flatbed scanner software

Similar Messages

Maybe you are looking for