2407WFP monitr compatibility with Macbook Pro and saturation

I purchased a Dell 24" 2407WFP monitor to use with my new Macbook Pro for photo editing. Dell of course does not support MACs and has no MAC drivers (at least that's what Dell technical told me). I calibrated the monitor using Spyder2. The overall image is soft and the colors seems overly saturated and there doesn't seem to be a way to adjust this. When I run my PC through the same monitor, the colors seem much better and the image is very sharp. Any suggestions? Thanks.

-Will FCS1 work with Intel based macs or will I have to upgrade to FCS2?
As long as it is the Universal Crossgrade...FCP 5.1. The base FCS1 was FCP 5.0. You had to send in your disks and upgrade to FCP 5.1 in order to get a version that worked on Intel macs. If you don't have that, you're gonna need FCS2.
-Does Apple allow FCS1 to be loaded onto both a desktop and a notebook with a single licence?
Yes. Provided you are using only one machine at a time...cannot run both. It allows for you to have it on the desktop for when you are at the office/home office, and on the laptop when you are at home or on the road.
Shane

Similar Messages

  • Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

    Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

    Hi ..
    Shift key boots into Safe Mode, not Recovery.
    This only works on a Mac running v10.7 Lion or later.
    Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
    If you can't boot into Recovery Mode, help here >   Mac OS X: Gray screen appears during startup

  • Hearing conflicting reports. What camcorders work best with macbook pro  and imovie

    I am looking to purchase a new HD Camcorder, but Im told some of them dont work well with macbook pro and Imovie.
    Im in the process of buying a new iMac and want to make sure I will be able to load the movies direrct to imovie.
    Thanks.

    This forum is for mobile iMovie (iPads & iPhones).
    you may need the iMovie Mac forum:
    https://discussions.apple.com/community/ilife/imovie

  • Issues with MacBook Pro and Asus VW266H

    I own a 2.4 GHz 15 inch MacBook Pro,and an Asus VW266H (external monitor) that I wanted to connect to my Mac via VGA,since the DVI is connected to my desktop computer.So I went ahead and purchased Apple's MiniDisplay Port to VGA adapter,and connected my Mac to my display.At first,the Mac didn't recognize the display with its name and would only go up to a resolution of 1920x1080(while the maximum resolution of the display is 1920x1200). I restarted the Mac with the display plugged in,and once the laptop booted up,the resolution was 1920x1200 and the display was recognized, but immediately quite a lot of trembling was noticeable.When the display wasn't detected properly(as an Asus VW266H) this problem wasn't present. I'm guessing that this is a compatibility issue,which by the way wasn't fixed by the latest EFI update by Apple,which improved external display compatibility. Does anyone have any idea if the problem might be something else other than lack of compatibility and/or how to fix it?
    I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...

    Concerning this comment:
    I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
    I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
    You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

  • Problem with Macbook pro and Airport Express!!!

    I'm having the same problem I have seen others with right now with my macbook pro and my airport express. I have set up and reconfigured the A.Express 3 times now. I have the green light, i have the Ethernet configured, I have full bars of reception but I cannot access the signal. meaning I can not go online even though everything is set up correctly and says that it's good to go. Anybody have any advice?
    Is it an issue with having to re access the network I created with the Airport utility?
    It worked the first time I configured the A. Express with my macbook pro no problem. Then suddenly my computer was just not getting internet. Even though all the settings were ok and I was even getting full bars reception from the device on my comp. So I reset the A.Express and have been having the problem mentioned above since that point. Please help me if you have any advice. Thanks so much in advance.

    I had the same problem, and to test if I was connected launched Safari and Safari after a few seconds of not connecting, it shows you a dialog box, with options to follow up, I follow the dialog box and like magic I am connected to the Internet.

  • What surveillance camera and software are compatible with MacBook Pro and Mtn Lion?

    Hello,
    I want to know what wireless camera is compatible with my 2012 MacBook Pro and OSX 10.8 Mtn Lion?  I want to RECORD surveillance video.
    Also, can you recomend video recording software?
    Thanks!
    Newbie
    Message was edited by: newbies88

    You can get a replacemnt from http://eshop.macsales.com/
    Allan

  • Wireless Router issues with MacBook Pro and Windows XP laptops

    hello,
    I have a d-link wireless router and I have a MacBook Pro and a Windows XP laptops. My issue is that I have to keep rebooting either the router or the modem (which I both replaced) and it still does not work right. Now can mac and windows work simultaneously through a wireless router (d-link) with no issues?

    My problem is that every time I log off either computer, and when I start it back up up again I have to reconfigure all over again for both laptops to get connected to the internet. I called the d-link people and they pretty much said if i still had problem to go their web sites and download their firmware (which I have that version) so I am running out of options because I just can't turn either of them on with out reconfiguring it. Now I am using WPA on them. Could that be the issue? But right now I do not know. This is my first mac and I am getting a little irritated by this. Overall I like the mac except for this little issue. Does that help?

  • I need a new modem. Which modems work well with MacBook Pro and Airport Express?

    I need a new modem. Which modems work well with the MacBook Pro and Airport Express?

    You need to inquire from your ISP which modems are compatible with their netwrok. They should give you a list.

  • Problem of connection with macbook pro and panasonic TV

    Hello,
    I have a macbook pro and a panasonic TH-42PW*4. This TV has a VGA input. That's why I have bought a VGA adaptater and a VGA cable.
    However, when I have tried at home. I copied the video and I can see the name of the model of my TV on my macbook pro. But, it doesn't work. There's nothing on my tv.
    If somebody could help, that would be really great.

    You might do better not posting your question on the "Using iPhone" board. Perhaps here: http://discussions.apple.com/category.jspa?categoryID=190

  • Having issues with MacBook Pro and Verizon Mobile Hotspot

    Hey everyone,
    I bought a MacBook Pro with the Lion OS. I recently switched to Verizon and got an HTC Thunderbolt so I could use it as a hotspot at home and when I travel.
    The problem I am having is when I turn the Mobile Hotspot on is, it will connect and stay connected for anywhere from 2 to 10 minutes and then it will work intermittently after that until I turn it off. I've talked to Verizon Tech Support probably 30 times in the last 3 months about the issue. They sent me another SIM card and a new Thunderbolt at first. The issue did not go away, so they offered me a Samsung Charge. Got it and it did the same thing. So I told them to send me back a Thunderbolt, because its a better phone and the Charge was too glitchy.
    I've been to the Apple Store twice now and they dont know why its happening either. The only thing that has remained constant throughout this whole troubleshooting process has been my MacBook Pro. My questions are: Is anyone else experiencing this type of behavior? and What could possibly be causing this issue?
    Im a new Mac user, so Im not sure how to troubleshoot issues like this, or if there are compatibility issues Im not aware of.
    Thanks for your help,
    Matt

    Hi Matt,
    Did this ever get resolved for you? I have the exact same problem except I'm running Snow Leopard on a MacBook and my phone is a Droid Incredible 2. When I use the hopstpot from a ThinkPad running Windows 7 or a System76 netbook running Linux Mint it works perfectly. But when I try to use my MacBook it connects for, like you said, anywhere between 3-10 minutes and then connection is intermittent and super slow. I haven't gone through the motions of contacting Verizon yet...
    Thanks,
    Aileen

  • Family Tree Maker compatibility with MacBook Pro upgrades

    Blessings to those who are able to reply with possible answers.   I am sorry....but I have spent days working on getting my two USB ports to work also.  I basically use the USB ports for a wireless mouse and various flashdrives/memory sticks.  I have a MacBook Pro 2011 Snow Leopard 10.6.8  I have tried software update, SMC and PRAM resets, battery reset, hardware test, creating a new user account....and browsing and reading numerous discussion boards.....awgh!  I have stopped short of using my install DVD (fear of loosing data), upgrading to Lion or Mountain Lion (some fear of loosing an application that might not be compatible  FAMILY TREE MAKER 2010  19.2.1.241), contacting an Apple Store (AppleCare or whatever--live 2 hours away + fear of expense), and of course, trashing the laptop.  Does anyone out there have any possible solutions?   I see I am not alone.  --A frustrated first-time Apple products owner.

    Quote below from the Family Tree site:
    System Requirements:
    Mac OS X 10.5 or later, including OS X Lion (10.7)
    Intel-based Mac
    DVD Drive
    All online features require Internet access.
    Since Mountain Lion has not been released, there is no mention of compatibility.

  • What logic boards are compatable with macbook pro mid 2010

    i'm just curious about what logic boards are compatable with my macbook pro mid 2010?  didn't know if i needed to stay within the same year or if there are others that would work with mid 2010 layout inside the casing.  right now i have 2.4 GHz Intel Core 2 Duo and NVIDIA GeForce 320M 256 MB and really looking to upgrade this if i can find one online from a mac with a broken screen or some defect with the logic board intact. 

    Rather than the Samsung EVO, I would get a Crucial M500 series - http://www.amazon.co.uk/Crucial-960GB-Solid-State-Drive/dp/B00BQ8RGL6/ref=pd_sim _computers_5 - they just seem to 'play well' with Macs where some people have reported problems with Macs and the EVO series.
    Good luck,
    Clinton

  • How do I use the App store with macbook pro and mac pro

    I currently use the app store with the mac book, but want to buy (share?) apps and music with the mac pro.
    I can't find anything that specifically outlines how this works.
    I use SplashID with the macbook and an iPhone, and want to use it (and sync it) on the mac pro as well.
    If you buy apps for a macbook, can you use them on a second machine, or do you need to buy it a second time?

    Your license from the MAS allows you to download and install the apps on as many Macs as you own or have under your control (institutional or employer supplied Macs.) The Mac should to be running Mac OS X 10.6.8 Snow Leopard or Mac OS X 10.7.2 Lion. Open the MAS app on the Mac Pro and sign into your account to have access to download all of your previous purchases in the Purchased pane.
    Simple apps can also be dragged & dropped over a network connection from the MacBook to the Mac Pro.

  • Probleme with macbook pro and avast

    Hello,
    please i have a macbook pro mi-2009 with mac os x 10.8.5 and i installed avast and then all the applications don't want to start unless safari and default software and when i restart my mac he don't want to start again and when i started with windows boot camp he start normal.
    Sorry for my english
    and thanks

    i tell you that the machine don't want to start with mac os it start just with windows, and i don't have a time machine to restore to the backup

  • Connection issues with MacBook Pro and DVI to component video

    How do I connect a 2007 macbook pro to a regular tv (non-hd) via the DVI port with component cables? The image is always scrambled. The connections are fine, what do I need to do?

    Concerning this comment:
    I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
    I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
    You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

Maybe you are looking for

  • How to debug routine in process type "Deletion of overlapping requests"

    Hi all, I created a process chain including a process of the type "Deletion of overlaopping requests from InfoCube". In this process I created a routine to decide which requests to delete. Now I would like to debug this routine, but do not know how.

  • Select all tick boxes

    I have a cfoutput query which shows the folowoing Group 1 "Check box" "John Smith" "Check box" "Paul John" "Check box" "Jeff Small" Group 2 "Check box" "Craig Land" "Check box" "Pete Son" "Check box" "Pete smoth" so what i want next to each "Group" h

  • Installed latest update NO GOOD BEWARE

    Installed update on 9-29-2014 and after update some of the apps will not work  properly or not open NOT GOOD Never had an issue in the past but now considering other alternatives. have purchased in the last 5 years 3 Ipads and2 minis that's a lot of

  • I am getting an error message that says certain videos cannot be played

    Why am I getting an error message that says I can't play certain television programs on my iPAD2?

  • Duplex report problem - report states duplex but prints simplex

    The report states to run as duplex.  The printer is a duplex printer but by default set to be simplex.  Other prints such as Word work as duplex. I have tried to save the report with the printer settings as duplex but this has to be saved as a custom