242 Songs= 7.6 GB?!?!?!?! I need help now!

My computer crashed a while back and I have just been able to get all my songs onto the new computer. I tried to sync my iPod and it said there wasn't enough space so I restored it to its orginal settings and tried to sync again. It still said not enough room. It put 242 songs on the iPod and says that is 7.6 GB...I'm not good with technology but I know thats not right. So, I need help. I've tried everything I can think of and I'm stuck and frustrated. Please help!

Do you mean the MP3s take up more room and AAC files or do you mean WAV files (you wrote "AAV")?
I assume you mean AAC (which are MPEG-4 audio files). If so, that is normal. At the same bit rate, AAC files take up a bit less space than MP3 files. Apple claims that a 128kbps AAC is as good as or better than an MP3 at 160-kbps in sound quality. So they maintain you can either get the same or better sound quality with AAC but with less space (if you encode both at the same bit rate) or if the MP3s are encoded at 160 kbps you save even more space.
Sounds nice, but I have never actually noticed a big difference between AAC and MP3 files, but then again I also encode my stuff at 192-kbps in MP3 format and most of my iTunes and iPod listening are on earbuds, in cars, or through the computer and the multimedia speakers I have hooked up to it (better than the built in speakers, but still budget speakers), so I am not listening to these through high end equipment.
I personally use MP3 since it is a universal audio standard where as AAC is not. So my MP3s can easily go onto MP3 CDs for my wife's alpine stereo CD charger in her trunk or onto a GPS unit that plays MP3s or a mobile phone that plays MP3s, etc. I don't have to mess with much conversion for various devices.
Anyway, the choice is yours and only you can decide which you like best to your ears. You will get arguments on either side of the fence but my own opinion is that the differences between AAC and MP3, for the types of music I listen to and how and where I listen to them, is insignificant and so I just use MP3 since everyone/everything can play those.
Cheers,
Patrick

Similar Messages

  • I can't get the product i bought need help NOW doesn't let me connect when i have good internet

    i can't get the product i bought need help NOW doesn't let me connect when i have good internet

    [personal information should not be posted - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    https://www.adobe.com/account.html to check your subscriptions
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Some general information for a Cloud subscription
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  • HT4623 i have just loaded the latest update on my iphne now the phone is asking to connect to itunes and phone is locked, frozen and can't open up need help now desperatly

    i have just loaded the latest update on my iphne now the phone is asking to connect to itunes and phone is locked, frozen and can't open up need help now desperatly

    Same problem with the update, and iTunes can't find my device.  I've spent the last two hours researching this and trying everyone's ideas to no avail. I hope someone comes through.  Super frustrating :////

  • Why does creative cloud is still asking serial number after i purchase and it wouldn't let me use it anymore because my trial is over need help NOW PLZ

    why does creative cloud is still asking serial number after i purchase and it wouldn't let me use it anymore because my trial is over need help NOW PLZ

    Hi There,
    Kindly try the following steps:
    Sign out and sign in to Creative Cloud app: Sign out, Sign in | Creative Cloud Desktop app
    Sign in, activation, or connection errors | CS5.5 and later
    Thanks.
    Atul Saini

  • HT1420 this is the first time i'm about to use this computer to buy songs from itune n i need help

    i need help buying music from itune

    Podcast Producer is part of OSX server and is something I have no experience of. It is expecting your to be running your own server - AFAIK it's not designed for use when you are expecting to host on a commercially run server but I'm not sure about that. You should ask in the OS X Server forum applicable to the version you have. If you are not running OSX server then this program appears not to be suitable for you.

  • BBCurve8520 : "Reload Software 552" URGENT!!! I need help now...

    I 'm using BB curve 8520 now. Recently, I installed a couple of applications through BB App software on my device. I reboot my device after downloading apps but while restarting my device it stuck on "reload software 552" in the white screen. I removed and put it back my battery, same thing goes on. I don't know what to do. so, i tried to find solutions on google. i have tried application loader but it says "Desktop loader is unable to connect the device. you may need to enter the password on the device"  after the status shown 100%. I don't even have a password on my device. I'm so confuse about what is happening to my device. I cant backup my data through BB desktop software because it says my device is disconnected (I'm still connecting my device with USB) no matter how many times i click on Retry, it says unable to connect the device. My Problem is how to connect my bb with my pc (even though i had connected my device with USB, it didnt seem to work) and how to solve the "reload software 552" (Really need help D.  Anyone could help me to solve this problem? Thanks. 

    Additional Information:
    Thats what it says whenever i try to connect my bb.
    I cant connect my device.   Help...

  • I have just reset my password about a hundred times and still the facetime and I messenger is not accepting my password, I previously had FaceTime working now nothing is happening, I need help now please

    I have just reset my password about a hundred times and still the face time and I messenger is not working, I previously used FaceTime once and now I need help urgently
    What am I not doing?

    Hi fatbear711.  are the following as follows?  Settings/restrictions:  Facetime and Camera are both ON?   Also in Game centre at bottom 'Adding Friends" is turned on?  If all ok, log into your account via itunes App, Click on your ID at bottom left of say the Music page, then click to 'Manage', enter password.  On next page click on your apple ID at top, then select to go to '[email protected]'. Log in on the browser window page that appears and confirm that your primary apple ID and primary email have been verified (should have green ticks and the word 'verified' next to them.  If you use itunes on a pc to sync with then do this through iTunes;Store menu on your pc, ensuring that you sync your device once finshed.  You will also need to check that your device is set to the correct timezone and time in your devices settings page.  If problem still persists at least we'll know the basics are ok.
    When you post again can you also include whether ipad2/3 etc and iOS e.g. 5.3.1/6.01 etc
    Best regards
    Nick

  • Trying to move songs from 1comp to another- NEED HELP

    I was orginally trying to move my itunes folder from my old comp to my new one. Easy enough right? Wrong. I copied the folder and put it on my 40gb ipod then went to put it on my comp. Well it only put bout 1/3 of my music like the first 15 folders. It started saying files were corrupt. Then I started getting the ! with the folder on my ipod. I tried reseting it but that doesn't work and it is fully charged. I'm using Windows XP. Plz help. I just sold my other laptop so I need to get these songs off the other computer.

    I have a similar problem, my hard disk has been reformatted and my library of songs is now only on the iPod, can i transfer them back from the iPod to the computer or is my library now only accessible on my iPod.

  • Hello, how can I transfer music from my iPhone to my iTunes library. New computer and old one not abailable. Purchased items already done. Need to transfer 1200  songs. Thanks guys really need help 

    Hello
    oold computer no longer available. I have 1200+ songs on iPhone that need transferring to my iTunes library. Can anyone show me how to do this please?
    Thank you!

    You're welcome
    ps I have used both in the past
    best to keep a backup of the iTunes folder from PC

  • I bought an album and one of the songs wouldn't play I need help

    I bought an album on iTunes and one of the songs won't play

    Delete the track from the iTunes library, allowing iTunes to move the track file to the Trash. Then download the track again from the iTunes Store via this procedure:
    http://support.apple.com/kb/ht2519
    That fixes the problem for many people. If problems with the track persist, go here:
    iTunes Support
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Original not found? Big mess! Need Help now please!

    Hi! I need a lot of help.
    I deleted the songs off my itunes and then copied them back by using my ipod. Then, thinking everything would be fine with my music, I restored my ipod because it was messed up.
    Now when I tried to sync my ipod, it does not sync the music, and when I click the , it says original file not found! I bought all these songs once and I would be devestated to have to buy them again. Please help immediately as I will be leaving tomorrow!!!
    Thanks very much!!!
    Jakedre

    First thing to try, is booting from the restore DVD and installing a fresh copy of 10.6. If you're lucky, the 10.6.4 update just hosed your OS install, and a simple reinstall is all that's needed.
    Once you've booted to the 10.6 installer, it couldn't hurt to run Disk Utility from the Utilities menu to verify the SMART status of the drive, and even run a repair disk operation on it.
    If the SMART status is failed, or Disk Utility doesn't see the drive, then you're looking at a hardware failure. You'll need to take it somewhere to be fixed if it's under warranty, otherwise if you have some precision screwdrivers like a PH000 and Torx T4, you can replace the drive yourself with pretty much any 2.5" SATA drive.

  • Currupted ipod please need help now!!!!!!!!!!!!!!!!!1

    this first started happenin when i downloading itunes 7.0
    every time i connected my ipod a message would show up saying i have a (-50) so i decided i should restore my ipod
    but it didn't work so ALL my flippin songs are gone so now when i connect it says my device is currupted and i need to restore i already did restore and it won't let me add songs does ANYONE no what to do in this situation???
    PLEASE HELP!!!!
    this ipod is my baby:(((((

    My 1st guess is the
    Lin MB Eq on the OUT fader
    512@96 is the time you are giving to process the entire chain ( in to track to bus to master... ), in this case - probably not enough if you think about it from a sample sized signal flow perspective including what needs to be processed in what time. That plug is probably requesting a fair amount of lookahead, etc - depends on your PDC settings. What do your system performance meters show? At some point, there is probably just an odd bottleneck bringing Logic down if you expect much more and are familiar with your tools. It's up to you to try to find exactly where it is. Some plugs won't operate at smaller buffer sizes ( keep SR in mind ) - or will cause Logic to falter, or even cause Logic to look like it's working - but produce no sound.
    J

  • Need help now please. macbook wont start up

    I have a white macbook.
    I was using it yesterday and the computer just shut off. I went to restart it and it does the chime, goes to the apple screen and just as the little circle under the apple spins, the laptop totally shuts down. it will not start.
    I have tried to reset the pram and that didn't work. I just installed 10.6.4 yesterday....
    Please help. I need the computer for work today.
    Thank you.

    First thing to try, is booting from the restore DVD and installing a fresh copy of 10.6. If you're lucky, the 10.6.4 update just hosed your OS install, and a simple reinstall is all that's needed.
    Once you've booted to the 10.6 installer, it couldn't hurt to run Disk Utility from the Utilities menu to verify the SMART status of the drive, and even run a repair disk operation on it.
    If the SMART status is failed, or Disk Utility doesn't see the drive, then you're looking at a hardware failure. You'll need to take it somewhere to be fixed if it's under warranty, otherwise if you have some precision screwdrivers like a PH000 and Torx T4, you can replace the drive yourself with pretty much any 2.5" SATA drive.

  • LOCKED OUT OF MY CC. WHY! I need help NOW!

    CC says I havent paid. I have a new credit card. I've entered the details (correctly). Details don't update. CC now thinks I havent paid. I am working on a live project and I need it up and running NOW. Please help. Please, Please, Please tell me how to get back to work! It's serious.

    Forgotten passcode: http://support.apple.com/kb/ht1212

  • Getting error message... Need help now..

    I was using my powerbook g3 and all of a sudden i get a message pop up on the screen. It says: you need to restart your computer. Hold down the power button for several seconds or press the restart button.
    I held down the power button for several seconds numerous times and it did nothing.
    Then i pushed control-command-power buttons at same time and the computer restarts, just to the same spot, with the same message.
    I even found the manual restart button on the back and got the same result.
    Please help me. How do i get rid of this message and use my computer again? I have 3 sports pages to get done this weekend. I need my laptop to work.
    I am running os 10.3.9
    there is also a 9.2 os on computer as well.
    Please help!!!!!

    Robert:
    You are likely experiencing what is called a kernel panic. These may be either hardware or software based. To shut down the computer hold down the Power button for about five seconds. You will find more about KPs and troubleshooting information in Dr. Smoke's FAQ Resolving Kernel Panics. If you are able to locate the crash log, please post the last one, as that may be helpful in pinpointing the cause of the issue.
    cornelius

Maybe you are looking for

  • BW Job Taking more time than normal execution time

    Hi, Customer is trying to extract data from R/3 with BW OCPA Extractor. Selections within Infopackage under tab Data Selection are 0FISCPER = 010.2000 ZVKORG = DE Then it is scheduled (Info Package), after this monitor button is selected for the sche

  • Cn anybody tell me the date concept in HR payroll

    Hi experts.... Well i m currently wrking in HR payroll module ...nd its all abt infotypes and date concet well if nybody have docs related to date concept cn u plz send me or tell me...suppose if i hv to choose date from  01-08-2009 to 31-08-2009 ...

  • HAL Best Practice

    I am trying to utilize HAL for Dimension building with a SQL Server stored procedure as the source. Can't figure out how to return values to they can be mapped to application? Any ideas or better approach to somewhat automated dimension building. Hav

  • HT5622 "your apple id has been disabled". Will not clear even after resetting.  Please help!

    Unable to clear message even after resetting.

  • Reports using Open Hub

    All - We are currenlty using Bex and some of the reports that the users will be generating will exceed excel limit of 65k rows. I had suggested using web reports, but when the users run large reports they are timing out. The basis team changed the ti