24P Advanced Issues with Export

Hey all-
I have a short film that I made on a Canon XL2 with a Firestore drive. The camera settings were in 16x9 with 24P Advanced on the camera, and Quicktime 24P in the firestore selected.
When you open the individual clips in Quicktime, the audio is way off and there is serious artifacting at the end of the video, but when you pull it into final cut (using Final Cut Studio 1, FCP 5.1.4) and edit on either a 24 FPS or 23.98 FPS timeline, everything is perfect.
When I try to export using either quicktime conversion or cinema tools, the audio is way off, as is the video. In fact, it will show artifacting on some of the clips, and the video is way off. I am outputting a DV NTSC with 24P and anamorphic selected, but it doesn't seem to work at all. Every setting I try, even those matching the sequence preset, seem to mess up the export. I have read a few other articles on other websites, but nobody answered them, and I haven't been able to find anything here.
Can anyone please help me?
Cheers!
D

I have found that sending the files to Shake through the FCP timeline and rendering them back out through a file out node takes care of the issue. Seems like a pain, but I guess if it gets me to where I need to be, it will have to do.
Is there anyone who can give me insight as to why this happened? Is it a glitch with the XL2? The Firestore Drive Settings? Final Cut?
Anyone?

Similar Messages

  • Issue with export in Excel in WAD

    Hi
    I have an issue with export to excel in WAD. I have a web template with two or more tabs.
    On the webtemplate I have two buttons to export to excel. One to export the content from the active tab and one button to export content in all tabs.
    My problem is that when I export to excel it always add the current/active content twice. I've tried with both buttons and they work as expected except that they export one table to much (the active).
    can anyone help / give a clue what to look for.
    br,
    John
    Edited by: John Dolph on Apr 15, 2010 10:50 AM

    Hi
    Sorry I has been a while but the problem still occurs,
    I've defined my export button group like this in a seperate template and I expected that it would only return the resultset from TAB_A and TAB_B but it also export the resultset from the tab I'm currently on.
    <bi:TEMPLATE_PARAMETERS name="TEMPLATE_PARAMETERS" />
                <bi:BUTTON_GROUP_ITEM name="TAB_BUTTONs" designheight="23" designwidth="300" >
                    <bi:BUTTON_LIST type="ORDEREDLIST" >
                        <bi:BUTTON type="COMPOSITE" index="2" >
                            <bi:CAPTION value="EXCEL" />
                            <bi:TOOLTIP value="Table, Graph and/or Table/Graph download to PDF" />
                            <bi:ACTION type="CHOICE" value="INSTRUCTION" >
                                <bi:INSTRUCTION >
                                    <bi:EXPORT >
                                        <bi:ITEM_REF_LIST type="UNORDEREDLIST" >
                                            <bi:ITEM_REF index="1" value="TAB_A_ANALYSIS" />
                                            <bi:ITEM_REF index="2" value="TAB_A_CHART" />
                                            <bi:ITEM_REF index="3" value="TAB_B_ANALYSIS" />
                                            <bi:ITEM_REF index="4" value="TAB_B_CHART" />
                                        </bi:ITEM_REF_LIST>
                                        <bi:EXPORT_FORMAT value="XLS" />
                                    </bi:EXPORT>
                                </bi:INSTRUCTION>
                            </bi:ACTION>
                        </bi:BUTTON>

  • Issues with export with upgrade to 3.3

    I am experiencing issues with export with 3.3
    The image looks great in the Browser after editing. However when I checked the export folder I discovered corrupt files.
    I only dicovered it because I tried to email one of the images.
    2 out of 200 the blacks had solarized meaning all blacks went to white.
    Never had this problem before in any of my Aperture Versions since day one.
    The bottom line problem how can trust that the images are ok on export whitout having to look at every single export later.
    This is embarissing since I had already delivered a project not knowing there were bad files.
    Additionally images do not seem to be as sharp before the upgrade. I am using Nikon 300 and Nikon 7000 with San Disk Cards.
    Do I have to do some camera profiling ?

    Have you checked the Color Profile setting in the export preset you are using?
    I found my Color Profile settings switched to different settings after the upgrade.
    Try the Generic RGB profile.
    Regards
    Léonie

  • Issues with Export/Import using Database & Shared buffer

    Hi All,
    I have a method that calls a program via a job and I am having issues passing data between the two.
    Note that two different users process the method and program (via job) resp. This is how I am calling the second prog-
    SUBMIT ZPROGRAM
                 VIA JOB     l_jobname
                     NUMBER  l_jobcount
                     USER    i_user
                 AND RETURN.
    I need to pass data from method to  the second program and vice versa and then the method continues its processing with the data acquired from the second program.
    I have tried using Import/Export using database and also shared buffer. What I have found is that most of the times I am able to pass data from method to program. However the job takes a couple of min to execute and I think that the data is not making back to the method in time.
    I have looked at some useful forum links-
    Problem with export/import in back ground
    Re: EXPORT/IMPORT  to MEMORY
    but havent been able to find an answer yet. Any solution? Thanks in advance for your help!
    Liz

    Hi Suhas, Subhankar
    I have tested the scenario without the job previously itself and it works. Thats the reason, i am trying with the job now as my requirement is that I need to change the user while executing the second report.
    Here is an example of my import/export - I am passing the return value from the second report to the first.
    Code in second report-
    DATA: INDXKEY LIKE INDX-SRTFD VALUE 'RET1'.
    INDX-AEDAT = SY-DATUM.
    INDX-USERA = SY-UNAME.
    EXPORT RETURN1 TO SHARED BUFFER INDX(ST) ID INDXKEY.
    Code in first report -
    SUBMIT ZPROGRAM
                     VIA JOB     l_jobname
                         NUMBER  l_jobcount
                         USER    i_user
                     AND RETURN.
    Once Job close FM is executed successfully, I import the values as follows
    IMPORT RETURN1 TO RETURN1 FROM SHARED BUFFER INDX(ST) ID INDXKEY3.
    INDXKEY is having value RET1.
    However Return1 is not having any values in first report. It has some value in executed without the job
    Please note that I have tried Export/import with Database too and I am getting the same results.
    Thanks for your suggestions.
    Regards, Liz

  • Issue with exporting Financial Report in Smartview 11.1.2.2

    If I export a FR in "Export in query Mode" , it concatenates the parent with the child (parent.child) and does not return anything in Smartview. Even though the report works fine in workspace.
    I narrowed down the issue and it seems if I use Stored member roll up instead of using Shared member roll up it returns the right data when I export the report in Smartview.
    So the issue is only with the FR using Shared members.
    Does anyone know if this is a known issue or can replicate this in their environment ? We are on version 11.1.2.2
    Thanks

    Nope that didn't work, but I figured out the error. I was running the command on a client machine. When I run the command on the server itself, it works fine.. well, now I have issues with my POVs, but at least it's finding my .csc file.
    Thanks for your help John.

  • Issues with exporting video from MacBook Pro to flash drive

    I cannot sucessfully transfer [export] video taken on my gopro camera, from my MacBook Pro to any flash drive and play them on other computers.  For some reason the files are not playable, even with quicktime.  They will not play with ANY of my video softwares such as divx or any AVCHD software on a windows computer.  I need to make a presentation for a club trip in a few days! Can any one please suggest what is wrong?  They play on the Mac using Flip player but not quicktime!
    Oh, and I don't have issues with transfering or exporting Jpegs or other photo formats.  Only video.
    Message was edited by: gmob25

    hmmm.. the files from GoPro are already mp4 format.  The Flash is already FAT32, brand new 16gig...
    I am new to Macs but have no problems with PC's.  I suspect that because the files are exporting as shadowed files which won't play and are very small kb files, yet they are actually in excess of 140 mb each that it might have something to do with the iphoto software?  That's where the pics and video are, they imported to there by default, not to a folder in the home folder [which is where I would have expected them to be]
    By the way, the GoPro is already in mp4 format so it is easy when transferring to computers. No need to convert. I tried converting them to see what the outcome might be, and none worked!  I tried every format I could find using Video converter ultimate software, which is excellent.
    And the problems began when quicktime wouldnt play the file, the screen was black.

  • Issue with exported playlist song order

    I exported a playlist (with the playlist sorted on the manually arranged order, far left column) as a .xml file using iTunes 7.0.2. When a friend imports this playlist into his iTunes (7.0.1) the song order is incorrect (again with sorting done on the far left column). When I look at the exported XML file with a text editor the order of the song entries is also wrong in the XML file. Has anyone elsed noticed this problem?

    Actually, I looked more closely in the text editor and the playlist order looks correct so there appears to be an issue with 7.0.1 (I guess).

  • Issue with exporting JPGs

    Camera: Nikon D7100 Using 14-bit RAW   So somehow I've failed to notice that when I export after editing and using the resize option (to 2000x2000), the quality of the resulting JPEG is soft and lacking in detail/clarity that exists in the image in LR. Even when I export it without resizing, leaving it in the natively taken resolution, the clarity and sharpness is gone. I've tried using the sharpen for screen settings but it doesn't fix the basic issue of the softness/clarity. I thought it might be the JPG view I was using (the default photo viewer in windows 8), so I reimported it back into lightroom but it shows the same lack of clarity/sharpness.   Attached is a sample of the issue. One is a screenshot of how it looks in LR, the other how it exports. 100% Quality, 72 resolution (have tried the default of 240 and it didn't change anything), sRGB color space. Am I doing something wrong with exporting?

    It happens on both version 5.71 and on version 6 (CC). I'm having the issue that others have had where the develop and library module previews don't match and what is being exported is how the library module sees the edited photo. I understand that there are different preview algorithms for library/develop but that shouldn't matter when exporting.
    This post has a pretty lengthy discussion about the issue but has no resolution:
    Develop module & library module aren't matching

  • Issue with exporting line to excel on Crystal Report 2013

    Hi all,
    I got the issue when exporting to Excel
    I would like to export to excel with line border in cells. But it seems there is limitation when using "line" object. If I use line, in excel file, there is nothing. Then I changed to use border cells. It's exported fine to excel, but I got another issue.
    Because data is so long, so I use "can growth" function. But if I use "can growth" function. I got issue when export to excel file like the picture I attach here.
    There are a lot of empty cells when wrapping text, how can we remove empty cells? And the line was drawn incorrectly.
    Thanks so much.

    I need a report with border cell and do not merge cell or blank row/cell after exporting to Excel. Most of them are fine (using border cell instead of line object). But I got issue when using "CanGrow" option to extend height of text object automatically.
    Below is detail.
    1. If the "CanGrow" option is false
    - In preview report, the field does not extend the height to show all data if it is over
    - Then, export to Excel by "Microsoft Excel (97-2003)"=> it shows exactly what I saw in previewing (data has been truncated automatically).
    - If export to Excel by "Microsoft Excel (97-2003) Data only" => it shows all data but the formatting of cell (border, width) is missing
    2. If the "CanGrow" option is true
    - In preview report, the field extends automatically if the field is too long but other fields still remain
    - Then, export to Excel
    I expect I can see all data with the correct border cell and do not merge cell in the preview and Excel (the cell may be wrap text or not if it is over the size but the data need to be kept instead of truncating)
    Is there any solution to meet it?
    Many thanks.

  • Settings for 24p advanced mode with a Panasonic AG-DVX100B?

    I recently bought a Panasonic AG-DVX100B to shoot a docu and a low-budget feature. I have shot some test footage (and am going to be shooting) in 24P advanced mode. Can anyone tell me what FCP settings I need to change (or be concerned about) since I'll be changing from a mid-level consumer miniDV camera to the DVX?
    Also, so I don't have to keep bugging people in here, does anyone know of any reputable tutorial sites for using FCP with the DVX? Or even any site(s) or book(s) that explain FCP in more detail than the manual? I've perused Ken Stone's site, and it looks pretty helpful but, the more, the merrier!
    I'm using FCP 4.5 on a dual 2GHz PowerMac running 10.4.9, with 1.5GB of RAM, a 400GB internal drive, and a 140GB Firewire drive.
    Any help would be greatly appreciated. Thank you,
    Lloyd

    Lloyd... as a DVX lover, I must say you made a great choice.
    The DV/NTSC (or PAL) 2.3.3.2 Advanced Pulldown Removal option for capture works great... IF *I'll get to that IF in a second.
    I copied that default and made one that also includes the anamorphic button checked (as the default doesn't.)
    Ok... the IF - make sure you:
    1) NEVER turn off the camera while recording (use the RED stop button first, then turn off (of course))
    2) NEVER when shooting 24pA review your shot material. SOMETIMES if you use the find last frame feature on the camera (in VCR mode) it will be ok, but NEVER just rewind and start recording willy-nilly... this will for sure disrupt the cadence and you'll get a quit capture when you try to capture the footage.
    3) NEVER switch the scene setup on the camera in the middle of a tape. Put some duck-tape over that scene wheel so you don't hit it with your thumb!! (the B model is better about this as it is recessed a bit.)
    If all else fails, capture using the 29.97 setting without the cadence removal and then chop it up into bits and use the TOOLS menu feature to remove the cadence after you've captured it.
    As for the sequence (after you've got it captured...) use the 23.97 DV/NTSC (pal) sequence - use the anamorphic as needed.
    Good luck... feel free to check out the DVX site (if you like skateboard videos), there are some VERY knowledgeable folks over there - or email me anytime also.
    CaptM

  • Strange Issue With Exporting JPgs

    I am having a strange problem with exporting my vector files to jpgs.  When I export the file as a .jpg then open it some of the text or shapes (like rectangles or squares) are gone.  When I go back and open the .ai file the stuff is there, but it's just gone on the jpg.  If I open the .ai file in Photoshop it is gone also.  I have to save the file as a pdf then open the pdf in Photoshop and export as a .jpg from there.  It is very strange.  If I go into the Illustrator file and re-type the text that disapers, it usualy corrects the probelm.  I am not an expert with Illustrator so I may be doing something wrong, if anyone can help please let me know, thanks!! (I have CS3)

    I am using Windows XP with CS3, I do not see a box to uncheck it.  I  just
    cleared the attributes and reapplied the fill color and that  worked. But I
    only see the overprint on the shapes but when the text is  diapering I do
    not see the overprint in the attributes panel nor on the shape  that is behind
    the text.
    In a message dated 3/12/2010 11:49:57 A.M. Central Standard Time,  foru
    [email protected] writes:
    Just  uncheck the box in the Attributes  panel.

  • Issue with Exporting Pdf as HTML

    Hi all,
    I am trying to Convert a PDF to HTML using the "Save as Other -> HTML(Web Page) in the File menu, After Conversion I see some of the characters that are present in Symbol Font are not converted properly(Eg a text 8.7 appears as ""). instead of numerals. Any thoughts on this issue. Thanks in advance.
    Regards
    Srini

    I can't see this working very well. Even if it exported a correct reference to the symbol font, people who view the converted page probably won't have the font and won't see the symbols. You can perhaps replace them with graphics.

  • Issue with Export To Excel Feature

    Hi,
    I have a OAFramework Page, which is having a table region. Have also created an 'Export Button' as table action for this table, to export the data to csv file. The View Instance that is associated with this table has a query already set/defined in the VO definition, in my code based on certain conditions I am changing the view object's query using setQuery() Method.
    The data displayed in table changes as per the query modifications, however the data that I get in the Excel/csv file is the same (i.e. the same data i get with the query already defined while creating the view object).
    Any idea, what changes i need to make inorder to make this work? Guess the query changes are not getting reflected for the export button click?
    Thanks
    Puja

    Yes, whenever this VO is accessed, you will face the performance issue. As VOs' are maintained through AM pool, until the AM is released, the corrsponding VO's memory foot print will be there in the middle tier.
    And if you have less resourse at middle time, it surely will affect other users because someone else is hogging the resource.
    --Saroj                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Data load issue with export data source - BW 3.5

    Hi,
    We are facing issues in loading data with the help of export data source.
    We have created export data source of 0PCA_C01 cube. With the help of this export datasource,  we are loading data to other custom cube. Scenario is working fine in development server.
    But when we transported objects to quality server data is not getting loaded to custom target cube.
    It is extracting zero records.  All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs.  Every object is active but data is not getting extracted.
    RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development.   We are in BW 3.5 with patch level 19.
    Please guide us to resolve the issue.
    Thanks,
    Aditya

    Hi
    Make sure that you have relevant Role & Authorization at Quality/PRS.
    You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
    Hope it helps and clear

  • Issue with Export of 4.6D System

    Hi guys,
    I am trying to run an export on 4.6D using Oracle 9.2, but unfortunately I get the following message in my INSTGUI..
    Would anyone have any ideas on how to solve this issue?
    I've read that we need to check if the users have permissions or are locked, but how would one do that, and which users must I look at?
    Thanks!
    <i>
    trnsappr /software/inst_temp > more /oracle/QTG/sapcheck/cdwmbunr.sta
    BR0801I BRCONNECT 6.40 (41)
    BR0805I Start of BRCONNECT processing: cdwmbunr.sta 2007-10-29 12.12.43
    BR0484I BRCONNECT log file: /oracle/QTG/sapcheck/cdwmbunr.sta
    BR0280I BRCONNECT time stamp: 2007-10-29 12.12.45
    BR0301E SQL error -942 at location db_connect-4
    ORA-00942: table or view does not exist
    BR0310E Connect to database instance QTG failed
    BR0280I BRCONNECT time stamp: 2007-10-29 12.12.45
    BR0301W SQL error -942 at location brc_dblog_open-1
    ORA-00942: table or view does not exist
    BR0324W Insertion of database log header failed
    BR0806I End of BRCONNECT processing: cdwmbunr.sta 2007-10-29 12.12.45
    BR0280I BRCONNECT time stamp: 2007-10-29 12.12.46
    BR0804I BRCONNECT terminated with errors
    trnsappr /software/inst_temp > more DBEXPORT.log
    INFO 2007-10-29 12:18:30 CommandFileController SyFileCopy:150
        Copying source file DBEXPORT.R3S to target file DBEXPORT.R3S.5 ...
    INFO 2007-10-29 12:18:30 Main
        Preparation successfully completed.
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
        checking host name lookup for 'trnsappr'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
        offical host name for 'trnsappr' is 'trnsappr'.
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
        host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
        host 'trnsappr' has ip address '10.96.226.154'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
        offical host name for '10.96.226.154' is 'trnsappr'.
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
        checking host name lookup for 'trnsappr'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
        offical host name for 'trnsappr' is 'trnsappr'.
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
        host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
        host 'trnsappr' has ip address '10.96.226.154'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
        offical host name for '10.96.226.154' is 'trnsappr'.
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
        checking host name lookup for 'trnsappr'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
        offical host name for 'trnsappr' is 'trnsappr'.
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
        host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
        host 'trnsappr' has ip address '10.96.226.154'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
        offical host name for '10.96.226.154' is 'trnsappr'.
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
        checking host name lookup for 'trnsappr'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
        offical host name for 'trnsappr' is 'trnsappr'.
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
        host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
        host 'trnsappr' has ip address '10.96.226.154'
    INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
        offical host name for '10.96.226.154' is 'trnsappr'.
    INFO 2007-10-29 12:18:31 DBEXPSERVER_IND_IND InternalColdKeyCheck:0
        The CD CDEXPORT1 will not be copied.
    INFO 2007-10-29 12:18:32 DBEXPORTINSTANCE_IND_ORA InternalWarmKeyCheck:0
        The installation phase is starting now. Please look in the log
        file for further information about current actions.
    INFO 2007-10-29 12:18:32
        Requesting Export Details
    INFO 2007-10-29 12:18:32
        Requesting Export Details
    INFO 2007-10-29 12:18:32 CHKLIBPATH_IND_ORA InternalWarmKeyCheck:0
        No shared library search path needed for database ORA!
    INFO 2007-10-29 12:18:32
        Checking the Library Path
    INFO 2007-10-29 12:18:32
        Requesting Export-Specific Parameters
    INFO 2007-10-29 12:18:32
        Testing the Database Connect
    INFO 2007-10-29 12:18:32
        Testing the Database Connect
    INFO 2007-10-29 12:18:33 DBEXPSERVER_IND_IND InternalWarmKeyCheck:0
        The CD CDEXPORT1 will not be copied.
    INFO 2007-10-29 12:18:33
        Requesting Information on CD-ROMs
    INFO 2007-10-29 12:18:33
        Creating the Export Directories
    INFO 2007-10-29 12:18:33
        Updating the Database Statistics for the Export
    INFO 2007-10-29 12:18:33
        Updating the Database Statistics
    INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA SyCoprocessCreateAsUser:300
        Creating coprocess /sapmnt/QTG/exe/brconnect -u / -c -f stats -o
        SAPR3 -t all -m +I -s P10 -f allsel,collect,method,precision -p 4
         as user qtgadm and group sapsys ...
    INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA SyGroupIDGet:100
        Group id for group sapsys is 101.
    INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA SyUserIDGet:300
        User id for user qtgadm is 105.
    INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA ExecuteDo:0
        BR0801I BRCONNECT 6.40 (41)
        BR0805I Start of BRCONNECT processing: cdwmbvbd.sta 2007-10-29
        12.18.33
        BR0484I BRCONNECT log file: /oracle/QTG/sapcheck/cdwmbvbd.sta
        BR0280I BRCONNECT time stamp: 2007-10-29 12.18.35
        BR0301E SQL error -942 at location db_connect-4
        ORA-00942: table or view does not exist
        BR0310E Connect to database instance QTG failed
    <b>
        BR0280I BRCONNECT time stamp: 2007-10-29 12.18.35
        BR0301W SQL error -942 at location brc_dblog_open-1
        ORA-00942: table or view does not exist
        BR0324W Insertion of database log header failed
    </b>
        BR0806I End of BRCONNECT processing: cdwmbvbd.sta 2007-10-29
        12.18.35
        BR0280I BRCONNECT time stamp: 2007-10-29 12.18.35
        BR0804I BRCONNECT terminated with errors
    INFO 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA ExecuteDo:0
        RC code form SyCoprocessWait  = 3 .
    ERROR 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA ExecuteCheck:0
        Exit code from /sapmnt/QTG/exe/brconnect: 3.
    ERROR 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA InternalInstallationDo:0
        Phase failed.
    ERROR 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA InstallationDo:0
        Phase failed.
    ERROR 2007-10-29 12:18:35 InstController Action:0
        Step BRCONNECTEXPSTAT_IND_ORA could not be performed.
    ERROR 2007-10-29 12:18:35 Main
        Installation failed.
    ERROR 2007-10-29 12:18:35 Main
        Installation aborted.
    </i>

    please post /oracle/QTG/sapcheck/cdwmbvbd.sta

Maybe you are looking for

  • Preview Highlight Colour

    Just wondering if there is anyway to change the highlight colour in Preview from the dull grey to something that stand out more? Not the highlight colour when you select areas with the mouse, the highlight colour you get when using spotlight, then op

  • Inspection plan copy model

    Hello, How to extend the Inspection plan from one plant to another plan by copy model. The Master inspection characteristic were not getting extended, for ex when we coped from A- B , Header, Operation , Material assignment get copied , but the  Mast

  • Image viewer overlaps the menu

    Hi, Please need some help with an imageviewer. I'm using a jquery.slidingGallery-1.2.min on my homepage: www.rusteloos.com I've placed this viewer in a cell. But when the window is made smaller the viewer overlaps  the menu. How do I make sure the vi

  • Version Control - Web(JSF) project

    Hello fellows, Which version control for Web project you are using? I have been using CVS for common java (and nojava) projects but is there any another version control tool for Web projects. Any suggestion how web projects should be stored in reposi

  • Track ball in camera mode?

    I am unable to zoom in or out using the tack ball. This just began. Anyone have ideas? Perhaps I did something wrong. Until tonight it worked fine.  About two weeks in with the 9630.  Thanks in advance for whatever help might come my way  :-) Andy