25 fps on more accurate play back sequence.

I'm using after effects 5 on a mac pro 4.1, If i wanna play all the sequence on a real time i have to play it on fast mode (low quality video). I can't play it on more accurate (full quality video) mode because it plays at 23.9 fps. What can i do to play one sequence at full quality mode at 25fps?
Thank you!

Good morning Rick!
I'm working on a SD project. My computer is:
Mac Pro 4.1
2.26Ghz Quad-core Intel Xeon
12GB RAM
NVIDIA GeForce GT 120
And this is my after effects configuration
Thank you very much!!!!

Similar Messages

Why does 60 fps (59.94) footage play back as 30fps on a 60fps timeline in Premiere CC 2014 (Win 8.1)?

I have a 2nd computer (Win 8.0) with Premiere CS6 installed that doesn't do this, meaning 60fps footage plays back on a 60fps timeline. On my primary computer (Premiere CC 2014), 60fps footage that plays back on a 60fps timeline doubles up on every even frame while dropping every odd frame. Does anyone know why this is happening? Thanks, Grant

Cancel that, my source footage shutter speed was 1/30th instead of 1/60th, no wonder!

Unable to play back entire sequence in CS4

I'm transitioning from FCP to Premiere and am having an odd issue with a project. I cut up a clip with the razor blade tool, copied it a few times, reversed some in the speed/duration panel and arranged them in a sequence. I then rendered the entire work area. However, when I try to play back my sequence, it just plays less than a second and then the marker on the timeline returns to the original point. I feel stupid asking this, but...uh, how do I just play back my entire sequence? I must be missing something here.
Thanks,
Zach

Thanks for the suggestion. I thought this could have been the problem as the files are on a different disk from the application, but launching premiere as root yields the same issue. The option to repair permissions on the secondary drive (where the files are located) is greyed out in Disk Utility, possibly because I disabled permissions for everything on that disk. I even tried logging in as a user on that drive and launching Premiere, but then I get a "media pending" screen in the program window.
Any more ideas?

When I import my files only the audio plays back not the video. If I export the sequence its there?

When I import my files only the audio plays back not the video. If I export the sequence its there?
I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
Any help would be appreciated and if theres any more info I can provide please let me know.
Thanks
Drew

Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
Also, More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Made preference changes, but still getting the Ram preview needs 2 or more frames to play back.

I'm new to After Effects CS6 and am working on a very simple Kinetic Typography project. I don't have a lot of memory, but this is a really simple project, so I'm wondering if maybe I'm just not using the work area correctly. Every once in while I can get the project to RAM preview, but only for a few seconds. Most of the time I get the "Ram preview needs 2 or more frames to play back" error message. I have pasted my sytem info and setting info bleow. Thanks for any insight!
I have checked the Render Multiple Fames Simultaneously box and have set the seetings at:
Here is the info when you click on details:
Installed RAM: 4.00 GB
Current RAM Usage: 0.00 GB
Allowed RAM Usage: 2.50 GB
Process ID
Application Name
Min Needed Memory
Max Usable Memory
Max Allowed Memory
Current Memory
Current Priority
3081
After Effects
0.00
0.00
2.50
0.00
3 - Low
System info:
System Version: Mac OS X 10.6.8 (10K549)
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB

What exact version of After Effects?
Show a screenshot of your TImeline panel and Preview panel when the problem occurs.
Make sure that we can see the details in your screenshot. Your current screenshot is unreadable because it's so small.

New image sequence will not play back in real time.

I built a image sequence of 300 stills (jpegs) and when I ask it to build it at 30fps I can't get quicktime to play it back at that speed. I can barely get the software to play back at .25fps. I just bought the software to assemble consecutive stills from my DSLR and after spending 2 hours on the phone with apple I found out they offer no support for windows users.Is there another software out there that anyone could recommend that edits together stills to form a movie. Any Help is appreciated.

Premiere is showing multiple drivers, including an old Creative ASIO driver... but I ran a cleaner last year to remove it (not sure why Premiere is still listing this??). I also have a Matrox MXO2 LE Max installed, which I believe installs an audio driver as well.
I'm not sure what you mean by "check with system default"? There is nothing in the Premiere audio hardware preferences that mentions a "default" of any kind.
Again, this makes absolutely no sense as I've not had any issues for years and worked on this last night... turn on computer today and suddenly it won't play audio in Premiere?!
Anyway, in my audio hardware preferences:
- I have always had Adobe Desktop Audio set to Premiere Pro WDM Sound. The dropdown list there gives me the options of: Premiere Pro WDM Sound, Xonar Essence ST ASIO 64 (my audio card), Creative ASIO, Matrox ASIO Driver for Premiere Pro.
- Map Output for has always been set to Adobe Desktop Audio (Matrox Player is my other choice).
- Even when selecting Premiere Pro WDM Sound, it always displays the Speakers below as "Speakers (ASUS Xonar Essence ST Audio Device)"
One further note (not sure if it helps)... as I said, Premiere is showing the audio levels, but if I look at the Windows desktop sound it doesn't show any levels (it normally does). And again... sound is working in every single other program I've tried... INCLUDING Adobe Audition (which has some of the same settings showing as Premiere does!).
So this is definitely an issue within Premiere... I just don't know what else to do. Thanks for assisting!
Greg

I shot video on 7D at 60 fps. How do I play back at 60 fps in Final cut express?

I shot video on 7D at 60 fps. How do I play back at 60 fps in Final cut express?

You convert it to AIC 29.97 at whatever frame size.
Or purchase Premiere Pro CS6.
x

Insert a clip into a new sequence, the clip will not play back

Macbookpro 8G ram twin 2.5 Intel, 1333 Mhz
I am an experienced editor coming over from AVID. This is my second project attempt in Premiere. First was fine. I imported clips that live on my hard drive. When I make a clip selection, mark the in and out and "insert into a new sequence, the sequence will not play back un less I render it first. I am talking about one (1) shot maybe 3 seconds long. I have done no other edits in the sequence and have added no effects but there is an effect icon on the clip in the sequence, This can't be right. It is not the way it worked for my first test project. It would take 40 hours to edit a 60 second spot… What has happened here?
Footage is 1080p 24fps. Short with a digital DSLR and Files are the same (.mov) as in the first project,

I have exactly the same problem. All of a sudden preview window is not working properly. In some projects it only plays audio with gray screen, in some it doesn't plays at all or plays audio from another projects. Sometimes preview gets frozen with the first frame in the project. I can however play video from Event Library, but without any sound. When I create new project and drag clips from Library, it plays with gray screen and again without sound. Restarting iMovie or Mac is no help. I'm using iMovie 8.0.6
Waiting for help desparatly, thank you

Adobe Audiotion CS6, why won't it preview my audio when i try to play my sequence back?

So, before, my audition worked fine but when trying to edit my current audio project, I am unable to play the sequence back so that I can make changes to my audio efectively. My audio is at 48,000 and so is my video. Me needs help now!

Will it play back at all? If it won't, then check that your audio hardware is still connected correctly in Preferences>Audio hardware. If this gets disconnected, the transport won't work at all.

Premiere Pro is playing back my sequence at high speed. I do not want this.

I don't know what keyboard shortcut I must have accidentally hit, but I can't get it to play back at normal speed. I did not speed up any clips, so I'm assuming there's some easy way to disable this speedy playback that I just can't seem to find. Anyone?

Hi,
Right click on the clip and choose 'Speed/Duration'
Check if it is playing back at 100% or something else. The default shortcut would be to press Ctrl+R on Windows and Command+R on Mac.
Thanks!
Rameez

How to play back AVCHD video files without jerkiness result?

Hi all, I have an iMac 27" 3.06Ghz as well as the new MacBook Air 13 1.86Ghz, and both have 4GB of RAM. When I tried to play back AVCHD video files (*.mts) recorded from my Canon HF200 HD camcorder, the play back is always jerky and choppy. I have tried various software like Perian for QT, VLC, MPlayer Extended, all have the same result. However, I can play back other 1080p files like MKV and MOV just fine.
Is the jerkiness problem that I am seeing due to underpowered hardware? or is it I am not using the correct software? Note that I am not trying to edit HD videos, I just want to be able to play them back smoothly. I can play the same files on Windows 7 natively without any issues.
I am curious if any of you have the same problem. Please help!
Thanks in advance.
Ken

Swaza,
Just thought I would jump in and share some experiences with .tod and .mod files.
I too have the JVC GZ-HD7 camera and I can confirm that the new version of the MPEG-SC 1.93beta will open and convert .tod to .mov for use with iMovieHD. I am not sure that the files can be used with iMovie08 since I have not tried, but it will work in iMovieHD just like any other qt or .mov file import.
Also, you can use the QTpro plugin that came with the camera (should be on the CD as the only MAC software available.) This will allow you to open the files in QT and convert them to any other format needed. This plugin unfortunately does not allow QTpro to open the older .mod files of previous JVC cameras. For that you can still use MPEG-SC.
In my experiences over the last few weeks, having mistakenly dumped all of my footage onto my hdd as I used to do with my older JVC cameras, I am now stuck with 3 hours of footage on my HDD as .tod files. I have been struggling to find the right blend of codec type, compression amount, fps, and quality to convert these files in an acceptable resolution (1920x1080 full - another mistake since iMovie08 will not import this quality but will import the 1440 CBR mode.) Converting these files is a nightmare and has become a stain on my otherwise wonderfu lexperience with this new camera (It is an awesome camera despite what negative stuff the "Canon fanboys" are saying!) It takes an unbelievably long time to convert. And you will find that when viewing these files in QT either as .tod or even after converting to .mov, they will be jerky and stutter. I believe this is more to the fact that the files are just really huge. Playback inside of iMovie06HD was perfect for me though.
Hope this helps out and I hope others may offer solutions as to what codecs they are using and what settings they are using to keep the quality as high as possible when converting these files.

Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
I hope someone can help me with this as I cannot work on any projects.
thanks.

Hi john,
thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
This is the info that appears on the screen
I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
Thanks for your help and patience.
Arantza
Date: Mon, 23 Apr 2012 09:12:15 -0600
From: [email protected]
To: [email protected]
Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Finished DVD plays back differently on TV vs. my computer

Hi!
I made a 23-minute film with iMovie. Material was shot with Samsung VP-DC161 digital video camera. The quality is not impressive but it is bearable.
After editing the result looks allright. I put the DVD together with iDVD and burned a disc out of the movie. My iMac plays it back just as I'd expect.
here comes the "but"...
When I feed the DVD in my DVD player connected to my TV, I get noticeably worse results when playing back. Whenever the camera moves, it looks like I get reduced FPS, the movement in the picture from frame to frame looks like 12 FPS slide show. This gets annoying when the camera moves around, when it shoots a fixed point and people in the picture are moving I don't get the slide-show effect.
So I don't understand why I'm getting so different results in playback computer vs. DVD player. I'd be glad to get some help with this issue.
Thank you in advance!
Vellu Halkosalmi
Helsinki, Finland
iMac G5 20" Mac OS X (10.4.8)

Hi!
First of all, thanks for help so far...
Later versions fixed that. You do have v6.0.3,
right?
I actually do - I see that I posted into a wrong forum,m my mistake!
Samsung VP-DC161
Hey wait a minute! A quick Googling around indicated
that it is NOT a DV camcorder but a DVD camcorder!
iMovie is designed for DV -- it dislikes DVD
camcorders but can be tweaked to work with them with
3rd party apps.
How did you import the footage to iMovie??
Copied the 8 cm DVD files into my sons hard disk (PC), burned a 12 cm DVD out of the files and then converted them into DV-format using streamclip.
I guess your problem is in the import process. Maybe
wrong field dominance produces the symptoms you
describe. DV is always bottom field first but DVDs
can use either bottom field first or top field
first.
The DVD Player.app on your Mac may deinterlace the
playback, but when viewed on a TV the wrong field
dominance is VERY easy to see.
Ok, I need to study more of this. I'm a total newbie what comes to digital video, so back to study...
I may have to convert the material all over again, though I don't have the time to do it anymore
Thanks for help.
Vellu

URGENT Strange problem with no audio files playing back in arrange

Anyone ever have something in Logic Pro X (newest .1 update, auto updated on me but seems fine otherwise) where playback of audio just stops? Like, meters still move for automation, audio files still remain in place, but nothing is even metering? Another alternative of this project (which i dont' want to use) works, and this just sorta stopped playing back. nothing i can think that triggered it. I can start up a new instrument and it plays back and records just fine. All of my existing audio just won't play at all.
I tried changing my interface and back in preferences, I've restarted both program and machine, but just this one alternative of this project (the current and most important of course) just won't play back audio. It even plays back in the wave editor window, just not in the sequence.

Hi K-leb
Welcome to the HP Forums!
For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that the sound on your Envy notebook is unsatisfactory. You did restart once after updating to Windows 8.1 and it was OK until you had to restart again, and it reverted back. Here is a link to a YouTube video on How to Fix audio on windows 8.1 after update.
You could also run the HP Support Assistant to help look for updates and resolving issues. Windows 8.1 also has a built in troubleshooter you can use.
Press the Windows key +C to open charms
Type troubleshoot sound in the search bar and press enter
Follow the on screen prompts.
If you would like further assistance would you please provide your exact model of Envy you have. How Do I Find My Model Number or Product Number?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

CS4: Hangs When Playing Back Stills

Can anyone reproduce this:
Sequence is AVCHD, 720p... I've inserted a couple of pictures from my digital camera along with a couple of short movie clips (camera: Panasonic DMC-FT1)...
After inserting a couple of stills into the sequence, when playing back those stills I can't stop playback until playhead has either reached one of the movie clips of end of sequence.
Is this a bug of the current version (version 4.2.1)?

I have sporadically seen a very similar problem with stills in Premiere
CS4 when editing both mini DV footage and P2 footage. It seems to
be related to project complexity and not to a particular type of footage.
It seems to happen more often if I have a lot of large stills that are scaled
and panned as opposed to stills that are exactly frame sized.
When the problem happens, killing Premiere and restarting usually
seems to work ok, so it is not clear what triggers the bug.
I know nothing about the internal architecture of Premiere but it is
clear that there are multiple threads at work when playing from the
timeline and I am guessing that something about playing a lot
of stills causes the thread
that is responsible for listening to the user to "block" forever (wait for
some event that never will happen). So the player thread(s) keep on
playing but you can't stop them. Its unfortunately an all too common
type of bug in complex software and goes by the colorful name of
"deadly embrace" or deadlock.
I have mostly avoided this problem by preparing sequences of stills
in separate projects and importing them into a single final project
near the end of my editing process so as to mimimize the exposure
to situations likely to cause the problem.

25 fps on more accurate play back sequence.

Similar Messages

Maybe you are looking for