2509 router does not accept wan ip with subnet

hi i hv 2509, 2501. while configuring wan ip on serial interface its ot allowing me to configure ip with other subnet mask , its allowing only ip with default subnet mask, for eg- if i giv 202.54.10.1 255.255.255.252 on s0 of 1st router then router does not allow me to configure , but if i give 202.54.10.1 255.255.255.0 then it configure smoothly , can any body tel me why?

I am not confident that ip classless will help this issue. ip classless has to do with how we interpret the content of the routing table and not to do with how interfaces are configured. It is more likely that the ip subnet-zero command might be the solution for the symptom described.
I would ask for some clarification from Gulshan. When you attempt to configure the router with 202.54.10.1 does it give error message saying invalid mask? If so it is a symptom of attempting to configure an address that falls into subnet zero (which your example does). If you configure the router with ip subnet-zero and then attempt to configure the interface it should work ok.
Restriction on the use of subnet zero was common many releases of IOS ago. But those restrictions are not common in more recent versions of code. It sounds like your router is running code which enforces this restriction by default.
HTH
Rick

Similar Messages

  • TS1398 my ipod touch won't connect to my wi-fi which is locked,i've tried using the password on the router but it does not accept it,ive phoned talk talk,,,,let's not go there!!!!1

    my ipod touch will not connect to my home wi-fi internet which is locked,i've tried using the password on the router but it does not accept it.
    i phoned talk talk for advice but unfortunately i would have been as well asking an axe weilding monkey high on cocaine...
    appreciate any advice...
    thanks.
    martin.

    thanks for getting back so quickly.when i put  password into ipod it comes up with message
    "unable to join network"
    the router is using AES incription.
    my wi-fi is a secured connection WPA2,
    i believe i should have WEP or WAP connection for it to work?
    i have set up my daughters nintendo 3ds lite to internet no problem using existing connection.
    talktalk said they do not support apple ipod touch sytem?
    very confusing,particulary as i've bought 3 ipod touch ,,,,mmmmmmm!
    thanks again..

  • I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

    I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

    It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

  • Changed my AppleID and password - now can't log-in to iCloud with my deleted account.  It does not accept my passwords - old or new.  I cannot delete my old iCloud on phone

    iPhone 5S on iOS7 -
    I changed my AppleID and password online. 
    My iPhone keeps prompting me to log-in to iCloud with my deleted account.  It does not accept my passwords - old or new.  I cannot delete my old iCloud account because it requires that I enter

    Hi suefrombenton,
    Please see this previous discussion on how to change an Apple ID on an iOS device -
    How do I change my Apple ID on my iPad? | Apple Support Communities
    https://discussions.apple.com/thread/4431720
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

    hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Users receive "does not accept meetings longer than 1440 minutes" with MaximumDurationInMinutes set to 0

    Hi everyone,
    We are running on Exchange 2007.  I have a user who is attempting to book a meeting on a calendar and is receiving the error, "Your meeting request was declined. This resource does not accept meetings longer than 1440 minutes."  I know
    this is related to the "MaximumDurationInMinutes" property returned from Get-MailboxCalendarSettings in the Exchange Management Shell.  This value is currently set to 0, which I understand to mean unlimited.  The user did not experience
    this issue with other meetings and there are several meetings scheduled that exceed this limit.  I have included the results of "Get-MailboxCalendarSettings" and the email response (with some identifiable information removed) below.  Does
    anyone have any idea why this error might still be occurring and where it would pull the 1440 minute time limit from if it is not set? 
    AutomateProcessing : AutoAccept
    AllowConflicts : True
    BookingWindowInDays : 180
    MaximumDurationInMinutes : 0
    AllowRecurringMeetings : True
    EnforceSchedulingHorizon : True
    ScheduleOnlyDuringWorkHours : False
    ConflictPercentageAllowed : 0
    MaximumConflictInstances : 0
    ForwardRequestsToDelegates : True
    DeleteAttachments : True
    DeleteComments : True
    RemovePrivateProperty : True
    DeleteSubject : False
    DisableReminders : True
    AddOrganizerToSubject : False
    DeleteNonCalendarItems : True
    TentativePendingApproval : True
    EnableResponseDetails : True
    OrganizerInfo : True
    ResourceDelegates : {}
    RequestOutOfPolicy :
    AllRequestOutOfPolicy : False
    BookInPolicy : {domain.com/Core/Groups/Group}
    AllBookInPolicy : False
    RequestInPolicy :
    AllRequestInPolicy : False
    AddAdditionalResponse : False
    AdditionalResponse : <DIV><FONT size=2
    face=Tahoma></FONT></DIV>
    RemoveOldMeetingMessages : True
    AddNewRequestsTentatively : True
    ProcessExternalMeetingMessages : False
    DefaultReminderTime : 15
    RemoveForwardedMeetingNotifications : False
    Identity : domain.com/Enterprise/Service
    Accounts/Service Account
    IsValid : True
    ObjectState : Unchanged
    And the returned message:
    Message ID : <[email protected]>
    Sent Date : Thu, 2 Oct 2014 09:16:02 -0500
    From : [email protected]
    Sender MailID : [email protected]
    Reply To : [email protected]
    To : [email protected]
    Subject : Declined: Meeting
    ------------------------- Contents -------------------------
    BEGIN:VCALENDAR
    METHOD:REPLY
    PRODID:Microsoft Exchange Server 2007
    VERSION:2.0
    BEGIN:VTIMEZONE
    TZID:Central Standard Time
    BEGIN:STANDARD
    DTSTART:16010101T020000
    TZOFFSETFROM:-0500
    TZOFFSETTO:-0600
    RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=1SU;BYMONTH=11
    END:STANDARD
    BEGIN:DAYLIGHT
    DTSTART:16010101T020000
    TZOFFSETFROM:-0600
    TZOFFSETTO:-0500
    RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=2SU;BYMONTH=3
    END:DAYLIGHT
    END:VTIMEZONE
    BEGIN:VEVENT
    ORGANIZER;CN=Sara Luckie:MAILTO:[email protected]
    ATTENDEE;PARTSTAT=DECLINED;CN=Calendar:MAILTO:[email protected]
    COMMENT;LANGUAGE=en-US:Your meeting request was declined.\n\nThis resource
    does not accept meetings longer than 1440 minutes.\n\n _____\n\nSent by Microsoft Exchange Server 2007\n
    SUMMARY;LANGUAGE=en-US:Declined: Meeting
    DTSTART;TZID=Central Standard Time:20141215T080000
    DTEND;TZID=Central Standard Time:20141219T173000
    UID:040000008200E00074C5B7101A82E00800000000E066FB5521DECF01000000000000000
    010000000D93B3AD93730E647B8C7A1B864C90BD3
    CLASS:PUBLIC
    PRIORITY:5
    DTSTAMP:20141002T141602Z
    TRANSP:OPAQUE
    STATUS:CONFIRMED
    SEQUENCE:1
    LOCATION;LANGUAGE=en-US:Online Meeting\, N
    Y
    X-MICROSOFT-CDO-APPT-SEQUENCE:1
    X-MICROSOFT-CDO-OWNERAPPTID:-784160802
    X-MICROSOFT-CDO-BUSYSTATUS:TENTATIVE
    X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
    X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
    X-MICROSOFT-CDO-IMPORTANCE:1
    X-MICROSOFT-CDO-INSTTYPE:0
    END:VEVENT
    END:VCALENDAR

    Hi Derek,
    I find related information as below:
    The default options allow all users to book resources if they are within the set policies (i.e. up to 180 days in the future, up to 1440 minutes in duration, etc.), and will reject all other meetings. In the context of resource mailboxes,
    InPolicy and OutOfPolicy simply mean whether or not the meeting invitation matches any restrictions enabled on the resource mailbox. For example
    MaximumDurationInMinutes value for the resource mailbox is 30 minutes, any meeting invitation longer than 30 minutes would be considered OutOfPolicy. Using the
    RequestOutOfPolicy parameter, you can manually add users that are allowed to request meetings that are not within the policy, and if you really want to lock things down, you can set the
    AllBookInPolicy value to False, and then manually add users to the
    BookInPolicy field, or more restrictive, to the
    RequestInPolicy field.
    More details to see:
    http://blogs.technet.com/b/exchange/archive/2007/05/14/3402515.aspx
    I suggest set the MaximumDurationInMinutes parameter to a big number. Find a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/exchange/en-US/63ea54a2-6f18-4ff3-9f4d-239342d97081/need-to-remove-the-1440-minute-24-hour-limit-booking-on-all-the-conference-rooms-to-be-unlimited?forum=exchangesvradminlegacy
    Thanks
    Mavis Huang
    TechNet Community Support

  • I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

    I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
    Thank you,
    lagrl

    Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider.  iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
    Does this help.  Perhaps you already know this ?

  • Elements 9 does not accept or process RAW photo images taken with a Nikon D7000.

    Adobe elements 9 does not accept or process RAW photo images taken with a Nikon D7000. I called support for a download patch and they said I had to purchase a support package or essentially purchase Elements 10. I can't believe that Adobe would not have a download patch for this problem as my elements 9 is not very old. When I try to do the updates Adobe says the serial number of the elements 9 is not accepted for download or support even though I purchased it and registered it with Adobe.
    Is there any solution to this?
    Thanks.

    Thank you but still having a problem. I go to the edit menu>>help>>update>>check for updates and an update to 9.03 comes up as the only update, no camera raw update. It starts to download and then stops and says to close organizer and/or editor then starts back up and stops again saying "error installing this update. Close and contact customer support". When I called customer support earlier that's when they said they don't support 9 only v. 10 and did I want to buy support or a new program v10 to get camera raw processing for the Nikon D7000 RAW. Apparently I'm doing something wrong in the update procedure but don't know what. The camera raw version is 6.5 in my elements and understand that camera raw v. 6.7 is the update to process the images. Any ideas? If I uninstall and reinstall does the serial number still work on the reinstall?
    Thanks for help.

  • After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

    after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • My netgear router does not recognize my password and i cannot access it with my iphone

    My Netgear DG834PN router does not recognize my user name or password when i try to access WI FI with my iphone.I cannot get wifi on my iphone from this or any router. The router is a wireless and hardwired unit.

    Is your password by any chance in Hex? (all numbers or letters a through f) If so you may be able to translate the hex into ASCII or you could change to an ASCII password. I had to make that kind of change. Good luck.

  • I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

    I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
    <Personal Information Edited by Host>

    لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة  والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

  • My iPad 4 tried to open application but repeatedly iCloud asked for login with apple id password. I put my apple id password correct,even i reset it again but still it does not accept in iPad .i am bored with this 3rd class application.please help

    My iPad 4 tried to open application but repeatedly iCloud asked for login with apple id password. I put my apple id password correctly,even i reset it again but still it does not accepted in iPad .i am bored with this  class application.please help.After every 1 second icloud logoin asked.

    Find Apple ID
    https://iforgot.apple.com/applied
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • I cannot get online-does not accept password-any help??

    I cannot get online. Network status lights are all red. Even if I connect with an Ethernet cord. When I enter a password, it does not accept it. A new window opens and asks for the password.

    So how are you connected to the internet? Have you repowered your modem? have you repowered your router? if it does accept your password then the password you entered is incorrect.

  • Accidentaly i have block my Mac and does not accept my pasword, what can i do? I've written the right pasword and does'nt work.

    My Mac is blocked and does not accept my pasword, what can i do, to unblock it?

    Thanks for your replies.
    I originally posted because I thought either I was doing something stupid, or that there was some little known setting or control that might sort things out.
    When I called support, they tried 'little known setting or control' route, but it turned out that the ipad was definitely faulty and they have offered a replacement.
    If I can help others having the same issue, I would say call support first before returning as it is possible to reset it if it is a software problem, rather than a fault with the hardware.

  • Face time does not accept my Apple ID and will not work.  Help!!, face time does not accept my Apple ID and will not work.  Help!!

    Hi, Face time does not accept my Apple ID and therefore Face time does not work. Any suggestions?

    You might have some sort of interference or communication problem, I just wanted to check you were entering the right ID to begin with.
    If you are using the correct ID (without spaces), then you might try restarting the router or trying another wifi channel to eliminate interference.

Maybe you are looking for