2510 Photosmart Color LCD display not working

My 2510 Photosmart All In One Color LCD display screen has seemed to stop working and makes life difficult. Any solutions?

Hi
This is exactly what has happend to my PowerBook a few days ago. Its only just out of warranty too. Man I wish I bought Apple care!!!!!!
PLEASE, PLEASE, PLEASE, could you tell me what it was? Was it the inverter? I'm miles away from an Apple store (yes I know I live in the UK and its a small island, but its still miles) and woulf like to try and resolve it myself.
Works fine on an external LCD. Tried everything!
May get my screwdriver out.
Powerbook G4 1.5 Mac OS X (10.4.3)

Similar Messages

LCD display not working (blank screen)

One day old 15" G4 (the latest model). No major changes to configuration; only basic software installed (Adium, Messenger, Firefox, Remote Desktop).
The LCD display stopped working during normal operation (web browsing) and I assumed it was a power management issue (I was running on a low battery). I unplugged all devices, plugged it in and rebooted (per instruction manual); same issue.
Since then, I've zapped the PRAM, booted with "R", reset the NVRAM, and reset the PMU. I also tried loading the setup CD with the "Option" to get the hardware check; this may have given me helpful data but I can't see the display so I'm not sure (read: display doesn't work even when booting from CD).
External monitors work fine still. The Mac boots and everything loads perfectly. I can adjust the screen brightness on the LCD using the F1 and F2 keys; the display responds by varying the backlight but it is not rending the GUI; it remains black (or dark gray, really).
I'm experienced with computers but this is my first time working on a Mac, so I'm completely unfamiliar with how to troubleshoot these things. Any help you can provide is greatly appreciated.

Hi
This is exactly what has happend to my PowerBook a few days ago. Its only just out of warranty too. Man I wish I bought Apple care!!!!!!
PLEASE, PLEASE, PLEASE, could you tell me what it was? Was it the inverter? I'm miles away from an Apple store (yes I know I live in the UK and its a small island, but its still miles) and woulf like to try and resolve it myself.
Works fine on an external LCD. Tried everything!
May get my screwdriver out.
Powerbook G4 1.5 Mac OS X (10.4.3)

Zen Touch, LCD Display not working at all, but player is f

So I'm on the bus, listening to my Zen Touch, it's working fine, the LCD is working fine. Everything is dandy. Few songs later, I pull it out of my pocket, the LCD is blank. But the player is still going. I can change songs, adjust volume, play all randomly etc etc, but I'm working blind, cause there is nothing on the display whatsoever.
It was a dry day, so it wasnt moisture damage or anything. And I didnt drop it, or bang it. It went from working fine, to going in my pocket, to not working. Really strange.
I'm sure its just defecti've, but I leave for a week long vacation in just under an hour (good timing eh? works fine for 8 months and then bam, 6 hours before I leave the country...ugh **bleep** karma), and I'm praying theres a simple fix I'm just missing. I already tried multiple restarts and resets, and I even charged it for a few hours, thinking the battery was just getting weak. But no dice. I doubt anyone can help me, but I figured it's worth at least a shot.Message Edited by myname on 0-24-2005 05:07 AM

If it won't display anything at all, even after a reset, it's likely there is a hardware problem. You could connect the player to the PC and update the firmware, but I suspect it'll be the same after that, unfortunately.
Cat

Photosmart c6380 lcd display not lighting up

I have a C6380 all in one printer and the lcd display back light has been intermittently going off and on. The display still works and you can read everything on it, but it is just hard to read when the display is not being backlit. Sometimes when I tap on the screen or flip the display up and down the light will turn back on, but only for awhile. I have tried searching for other posts about this type of problem, all to no avail. I have even gone as far as trying to find a replacement part for it, nope. I just don't want to replace the printer because it is only about a year old and works great. Any help would be greatly appreciated.
Thanks.

If the printer is less then year old, then I suggest you call HP and get the printer replaced. If you exceed the 1 yr. warranty, then the printer replacement will not be free of charge.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

LCD Display Not Working

I have a T60, the bottum 1/3 of the screen suddenly is not displaying anything. There are funky lines across the width of the screen but only come up about a third. I haven't been able to find anything else wrong. The screen is fine when in a docking station or projected. Only the laptop's screen seems affected.

bags4440, welcome to the forum,
hopefully you have warranty, what you describe says to me that you have a defective display. Sorry
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

I have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it.

i have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it. it is not a pressing matter but if it is cheep to fix then i would like to do so

Most of us wouldn't know that here. Call your Apple Store.

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

Caller display not worked since June 2014

On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”.
I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?

An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014?

Display not working

Hi,
I am using Lenovo G510 Laptop. First I was getting an error of bad signature file which was stopping windows from loading.
I tried to fix it. I changed my BIOS Boot mode from UEFI to Legacy, and then system restarted. After the restart Display is totally black, like the Laptop is powered off. Hard disk light is on, battery power light also turns on when I turn on the laptop. But not showing any display. I've also tried by pulling out the battery and then pressing the power button for 30-60 seconds and then turning laptop on direct power. But it ain't working too.
Please any help in this matter will be highly appreciated.
Regards

Dear sir,
I gave my laptop to an HP authorized service centre in Ernakulum (Vertex techno solutions Bangalore Pvt ltd, Ernakulum) No: 2550, on 04/12/2014 . Same time i registered my laptop complaint in hp customer support. http://h30434.www3.hp.com/t5/Notebook-Hardware/display-not-working/td-p/4760312, informed me that no complaint to MB and GPU . But service centre informed that complaint in motherboard and asked me to change. When I talk them about the your mail and the details that you provided they suddenly respond they can't repair the laptop at their service center, disconnected the phone. I feel very much disappoint about your authorized customer services. In the mean time I kindly request you to take immediate actions regarding these kind of activities also provide a solution to repair my lap top
Shyju S
Research Fellow

(three-way color corrector) secondary color correction masks not working?

Hi I'm using PP 2014 on Yosemite. Anyone notice (three-way color corrector) secondary color correction masks not working?

strange. same stats here but im getting intermittent.... sometimes i can use the mask and the effect is only limited to the masked area. most of the time the masked area is ignored and the effect is applied to the whole image

Color Scheme Updates Not Working

Color schemeing is hugely helpful for me. I recently migrated from a Win7 machine to a Mac and have been trying to change the color scheme. I uploaded a dark scheme I found, that worked okay, but when I go in to make some additional tweaks, they simply don't save. I'll make the change > click OK > go back go the Preferences menu, review the change I made, but it won't show. As if the change didn't happen at all.
Quit the app after making the change doesn't seem to really help either.
Anyone experience anything like this?
Thanks!

I may be a little confused, but if you are working with a gray or white layer the color burn will not work as there is no color to work on. Does that make sense?

Color Highlights does not work for chart

When I set the color coding in the chart, it works fine if I run the crystal report on the same DB that I use to design the report.
Problem occurs if I run the report on another DB. Color Highlights does not work in that case.
I am using JRC to run the reports.
Thanks & Regards,
Amrita

Hi Jehanzeb,
In chart expert there is a tab "Color Highlightsu201D. In this tab one can specify the condition based coloring.
In my case I want to show "RED" color for Unauthorized events andu201D GREEN" color for Authorized Events.
While creating a report suppose I am using a database server "DB-A".I set the color highlights in the chart as I explained. Please be noted that when we click on the color highlights tab it asks for the database login.
To view the report we have our own server and we are using JRC APIs.
Hence I map my report with server and try to view the Report. My Server is connected with database "DB-B" which is different from the database I used to create the report.
This time color Highlight I have specified while creating the report does not work.
I have tried using the "Format Series Riser" option. But the problem with this is that, it does not color the chart conditionally.
I mean if I give GREEN for Authorized and RED for Unauthorized. It gives the green color either to Authorized or Unauthorized which so ever occur first in the chart.
For example:-suppose there is no Authorized Event on date 15-Jan-2009 and I select the date range starting from 15-Jan.In this case Unauthorized event is the first to print on the chart hence this event get the green color though I expect this events to be in RED color.
Regards,
Amrita

IMovie 10.0.1: Stabilization doesn't work. I have tried several times, it just grays out. Also, fonts, font size, color of title not working. What's the skinny?

IMovie 10.0.1: Stabilization doesn't work. I have tried several times, it just grays out. Also, fonts, font size, color of title not working. What's the skinny?

PROBLEM SOLVED!
I went to my device manager on my Windows 7 PC and found the Bonjour service in my Services and Applications section. I set it to manual and BANG iTunes started working like it's supposed to.
Unfortunately, I let my IPad get stolen on 17 Jan so I'll probably wait until after April to replace it with an IPAD 2!

Thunderbolt display not working on Macbook Pro - previously the display did work

Thunderbolt display not working on Macbook Pro - previously the display did work

I have upgraded ML but when the MBP tries to restart with the upgrade the MBP does not restart so I susapect the ML upgrade is not complete ? When you refer to 10.8.5 supplemental is this a separate upgrade ? When I connect the Thunderbolt to the MBP the Thunderbolt charges my MBP & I can play music from iTunes via the Thunderbolt. It is only the display that is not working on the Thunderbolt

Green-colored volume indicators that appear on the LCD screen NOT working

I have T61 with fresh install Window 7. After Win7 the laptop is VERY fast. The difference is incredible!
I was running XP and everything worked perfect, now the green-colored volume indicators that appear on the LCD screen is NOT working. Yes, I did downloaded the driver(s) from Lenovo site and made the rest work just fine.
Blue button works as well and when I open ThinkVantage I don't get any error.
Any idea/help greatly appreciated.
(I can live with out it, but it would be nice to have a perfect running laptop)
TIA
Ivone

Hi Ivone,
Not ignoring you, honest!
I wasn't even sure that Lenovo supported Windows 7 on the T61... but they do! I don't have a Win 7 machine yet, but in the past, people have gotten their green bars back by re-installing one or more drivers.
I didn't find Windows 7 drivers listed in the T61 support matrix, but if you go to the Support & downloads page and select T61, then select Windows 7 as your OS, there are a couple pages of drivers available. (Sounds like you already found them, just noting it here for my own and others' benefit.)
Good luck, and please let us know if that works for you (and which driver fixes it, if you figure it out.)
-Frank
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

2510 Photosmart Color LCD display not working

Similar Messages

Maybe you are looking for