2540 Lost Communication problem
Hi,
I came across a strange problem with two of Storagetek 2540s that we are using. When I check their status on CAM, it shows OK. But after a while, their status turns to "Lost Communication" all of a sudden. Once the network cables are unplugged and plugged back in, their status turns back to OK. I am using CAM 6.6.0.11, firmware is 07.35.55.
Has anybody encountered with this problem ? If did, please advise.
Thanks.
Hi,
Are you printing via AirPrint? AirPrint is the native print functionality within the ipad. There are no test pages as such with the mobile device setup.
When both the mobile device and printer are connected to the same wifi network (or connected via wireless direct), the formatting etc. should be fine, provided the printer & print cartridge are in good health.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"
Similar Messages
-
Hi there,
I have a very strange issue with a 2540 storage array. I have cam 6.9 running on Solaris and the array is running firmware 7.35. When I register the array it sees it ok however as soon as I finish the registration I lose communication with the array. However I can ping the array and I can also see the controllers and disk's etc within cam. I am also managing a 6540 on the same cam host which I have no issue with.
Can anybody assist?Hi there,
I have a very strange issue with a 2540 storage array. I have cam 6.9 running on Solaris and the array is running firmware 7.35. When I register the array it sees it ok however as soon as I finish the registration I lose communication with the array. However I can ping the array and I can also see the controllers and disk's etc within cam. I am also managing a 6540 on the same cam host which I have no issue with.
Can anybody assist? -
Communication Problem: E_ADEPT_REQUEST_EXPIRED
I keep getting this message :
Error getting License. License Server Communication Problem:
E_ADEPT_REQUEST_EXPIREDThe same problem. Origin is, I suppose, a changement of profile when I lost all my data and programs by a virus. Who can help us?
-
Hi, I think I have a communication problem between the servers in a cluster,
I attached a picture of the administration console where it seems that one
server in the cluster cant communicate with the other.
(one server is running on Windows and the other on Linux)
Any ideas to solve this problems?
Thanks
[console.jpg]
Using multicastTest I found that the messages that the windows machine
produces are lost. Nobody receives that messages.
I don't know what might be happening
cheers
"Campot" <[email protected]> escribió en el mensaje
news:[email protected]..
> Hi, I think I have a communication problem between the servers in a
cluster,
> I attached a picture of the administration console where it seems that one
> server in the cluster cant communicate with the other.
> (one server is running on Windows and the other on Linux)
>
> Any ideas to solve this problems?
> Thanks
>
>
>
-
Lost communication with the scanner of my LaserJet Pro CM1415 fnw color MFP with Windows 8.1
I have just upgraded my PC to Windows 8.1 (it came with Windows 8), and now I have "lost communication" with the scanner element of the CM1415...... The printer part is working fine!
I have read various fixes for other printers for 8.1, but does anyone have any experience with this particular model and this particular problem?
PS. The latest HP driver available for the CM1415 states that it is the same as the one delivered in the box.......Hi RTB2014,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to scan after updating the computer to Win 8.1.
I will be happy to help you.
Did you uninstall the printer software and reinstall the downloaded drivers?
If you didn't then I would uninstall and reinstall the downloaded drivers.
I have provided a URL to uninstall the printer software.
Fully uninstall the printer in Win 8.
You can download the newest drivers from this link. Select the operating system and click next.
HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
If you are still having issues I would download and run the Print and Scan Doctor since it might resolve the issue
automatically. Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
I believe that this will provide a resolution to your issue. Thank you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
After a fatal HDD crash and rebuild, my ADE was working fine but now it's not. I purchased a book from Google, it starts to download to ADE then I get the ADE message "Error Getting License. License Server Communication Problem. E_ADEPT_DOCUMENT_OPEN_ERROR. Can anyone help? I've re-booted and re-authorized with no success. My wife is all over me to get this fixed so she can read the book. Thanks.
FYI: ADE 4.0.3 Windows 7x64I was unable to download the book so I couldn't open it. However, I've been doing some experimenting and have finally got the book downloaded to ADE with some challenges. Here's what happened.
Prior to my HDD crash my Digial Editions library was on C:drive. When I restored my lost data it put it back on the C:drive. I copied it with all my other data to the new My Document on F:drive, pointed my existing My Documents to the F:drive.and re-installed ADE. It worked but VERY VERY slow loading. (4 minutes and not the only program to slow down. I checked drive share and everything should work well but it doesn't). Fine, I then pointed My Documents back to the C:drive and the original ADE library. Voila! It loads right away like it used to but now I get the open document error. This morning I redirected My Documents back to the F:drive which is where it was when I set up ADE. It again took many minutes to load but then allowed me to download the book.
So I guess the real questions is this: How can I move my ADE 4.0.3 library from the F:drive back to the C:drive without getting this kind of error? In absence of any better suggestion I'm going to uninstall ADE, point My Documents back to the C:drive which contains the original restored ADE library and re-install ADE. Do you think that makes sense?
Thanks for your help. -
I get this error message when I try to add an ACSM file to the Adobe Digital Editions library: "Error getting license. License server communication problem. E_ADEPT_DOCUMENT_OPEN-ERROR."
I have no idea what this means.
How do I resolve this error so I can open my ebook?
Thanks.I was unable to download the book so I couldn't open it. However, I've been doing some experimenting and have finally got the book downloaded to ADE with some challenges. Here's what happened.
Prior to my HDD crash my Digial Editions library was on C:drive. When I restored my lost data it put it back on the C:drive. I copied it with all my other data to the new My Document on F:drive, pointed my existing My Documents to the F:drive.and re-installed ADE. It worked but VERY VERY slow loading. (4 minutes and not the only program to slow down. I checked drive share and everything should work well but it doesn't). Fine, I then pointed My Documents back to the C:drive and the original ADE library. Voila! It loads right away like it used to but now I get the open document error. This morning I redirected My Documents back to the F:drive which is where it was when I set up ADE. It again took many minutes to load but then allowed me to download the book.
So I guess the real questions is this: How can I move my ADE 4.0.3 library from the F:drive back to the C:drive without getting this kind of error? In absence of any better suggestion I'm going to uninstall ADE, point My Documents back to the C:drive which contains the original restored ADE library and re-install ADE. Do you think that makes sense?
Thanks for your help. -
hello
after having disconnected their cable networks for 2 hours,we lost communication with the ethernet port of the 2 controllers
Now after having reconnect network cables, ping does not respond and CAM also
any solution please, "we can't restart the array now"
thankshello
thank you for this answer, but we've already checked the status
both controller and switch link status are up
I tried many times by disconnecting and connecting cables
but unfortunately the same thing
is it possible to resolve the problem if we try a ping for 5 or 10 hours ??
thanks -
Lost communication with the printer
I have lost communication between the computer and the printer..it was printing just fine and it quit immediately
To have any hope of providing an answer we will need more information. Please read this post then provide some details. What printer model? What operating system? 32 bit or 64 bit? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Communication problem between NetBeans and Tomcat
hi!
i got a quite mysterious problem. here is what happens:
- i start NetBeans 5.5.1 (the first time)
- i want to debug my JSF-Project, the Debugger starts
- After a few seconds the debugger waits for tomcat (it sais: "Waiting for Tomcat...") and tomcat starts
- Again after a few seconds the tomcat-debugger-output sais "Tomcat startet in 3333 ms".
okay.
when i enter http://localhost:8084/ in my browser i get the tomcat homepage, so the server has definitely started! But nothing happens in NetBeans and nothing happens with my project....
In the lower-right corner i see this blue working-bar that sais "deploying project" but nothing happens. The Project-Debugger-Output still sais "Waiting for Tomcat..." but nothing happens...
And after something around 3 minutes (i guess it's a timeout) i get the error "Starting of Tomcat failed." But is HAS started, i can login to the Administration-Area in my browser!
so i guess there is a communication problem between netbeans an tomcat. Netbeans waits for a message from tomcat but tomcat doesn't send it..or netbeans doesn't understand it.
But the story goes on:
When i press the debug-button a second time it takes only a few seconds till i get the message: "Tomcat server port 8084 already in use". OF COURSE! Because Tomcat has already startet and can't be stoped by NetBeans.
i'm trying to solve this problem for 4 days now, so i would be very happy if anyone has an idea where to start/continue the search...
thanks,
flo.
some system-info:
- windows vista business 32-bit
- no firewall is running
- AntiVir Personal Edition IS running
- Yahoo Widgets Engine IS running
- no other software is running
and finally the tomcat-log:
Using CATALINA_BASE: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base
Using CATALINA_HOME: C:\Program Files\NetBeans\enterprise3\apache-tomcat-5.5.17
Using CATALINA_TMPDIR: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base\temp
Using JRE_HOME: C:\Program Files\Java\jdk1.5.0_12
Listening for transport dt_shmem at address: tomcat_shared_memory_id
21.09.2007 18:27:50 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jdk1.5.0_12\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\Common Files\Teleca Shared;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\cvsnt;
21.09.2007 18:27:50 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:50 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1862 ms
21.09.2007 18:27:50 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
21.09.2007 18:27:50 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.17
21.09.2007 18:27:50 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
21.09.2007 18:27:53 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:54 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
21.09.2007 18:27:54 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/31 config=null
21.09.2007 18:27:54 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
21.09.2007 18:27:54 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3626 msAs i wrote before, the same problem occured for me. I have found a solution which is : Go to tools menu and then select options . In the proxy info, select No Proxy.
I hope this help you -
Communication Problem with the second battery
Hello,
In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
Thanks LinaHi, Lina
What is the machine type and model of your computer? Also, what operating system are you running?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
Communication problem with proxy server
We have establish the configuration of an iPad to access the enterprise net, but when trying to access any webpage we get the next message: Safari can not open the page. Error:"There is a communication problem with proxy web server (HTTP)"
The access has no problems with other movile devices.
Ahy help?Hi,
I am not sure whether you have already solved the problem or not....
Do the following to deploy MobileBIService.war file on tomcat
1.Stop Tomcat Web application server.
2.Copy the file, MobileBIService.war from [Install directory]\Mobile 14\Client to the Tomcat's "Webapps" directory.
In my case, I copied the MobileBIService.war from C:\Program Files (x86)\SAP BusinessObjects\Mobile14\Client to C:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps. ( I used BO 4.0 SP02)
3. Start Tomcat.
Restarting Tomcat would automatically deploy war file as a Web App
One folder u201CMobileBiServiceu201D will appear in webapps folder when MobileBIService.war is deployed successfully.
Hope it helps.
Regards,
Ankur -
Communication problem the web server extension (WGATE) failed to receive a
Hi,
When a user tries to access his timesheet he get the below error:
<b>communication problem the web server extension (WGATE) failed to receive a response from the ITS web service</b>
Only ONE user is getting this error. If everyone get\s the same we can check on the ITS side, but if only ONE user is getting it.
Please help.
Regards,
PKHI ALL,
Thanks for your time. The issue got resolved however without cheking the logs itself. The problem was with the scripfile. All other users and all other scripts were working, except one. And it got recified.
Regards,
P. Kumaravel. -
COMMUNICATION PROBLEM WITH SCANNER TO COMPUTER OF DESKJET 3050 j610
WHEN i TRY TO SCAN USING MY DESKJET 3050 j610 A MESSAGE SHOWS 'COMMUNICATION PROBLEM NOT CONNECTED THEREFORE i AM NOT ABLE TO SCAN.
i HAVE BEEN TRYING TO RESOLVE THIS PROBLEM OVER 8 HOURS AND I' M GETTING SICK. I'VE TRIED EVERYTHING AVAILABLE ON THE SUPPORT PROGRAMS INCLUDING 'PAINT' AND NOTHING WORKS.
I NEED A ANSWER OR I;LL THROW THIS THING OUTI have the same problem here, i have two PC's both running Windows 7 but only one works printing and scanning wirelessly.
On the PC running Windows 7 32bit wireless printing and scanning works great.
On the PC running windows 7 64bit only wireless printing works. Havent found a solution, but just a work around. Here it is......
1. Got to you printer and hit the Wireless button to find the IP address your router gave it.
2. Open up your Internet browser and input the IP address.
and...BAM!!! if it worked it should take you to the Deskjet 3050 All-in-One J610a Embedded Web Server page and from there you can scan with what looks like all the original options if the thing was working to begin with and save to your PC. -
Communication problem from the vpn-anyconnect to easy-vpn-remote
Hi Team,
I have a communication problem from the vpn-anyconnect to easy-vpn-remote, I´ll explain better bellow and see the attached
topology:
1) VPN Tunnel between HQ to Branch Office - That´s OK
2) VPN Tunnel between Client AnyConnect to HQ - That´s OK
The idea is that the Client Anyconnect is to reach the LAN at Branch Office, but did not reach.
The communication is stablished just when I start a session (icmp and/or rdp) from Branch Office to the Client AnyConnect,
in this way, the communication is OK, but just during a few minutes.
Could you help me?
Bellow the IOS version and configurations
ASA5505 Version 8.4(7)23 (headquarters)
ASA5505 Version 8.4(7)23 (Branch)
**************** Configuration Easy VPN Server (HQ) ****************
crypto dynamic-map DYNAMIC-MAP 5 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside-link-2_map 1 ipsec-isakmp dynamic DYNAMIC-MAP
crypto map outside-link-2_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside-link-2_map interface outside-link-2
access-list ACL_EZVPN standard permit 10.0.0.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.1.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.50.0 255.255.255.0
access-list ACL_EZVPN standard permit 10.10.0.0 255.255.255.0
group-policy EZVPN_GP internal
group-policy EZVPN_GP attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACL_EZVPN
nem enable
tunnel-group EZVPN_TG type remote-access
tunnel-group EZVPN_TG general-attributes
default-group-policy EZVPN_GP
tunnel-group EZVPN_TG ipsec-attributes
ikev1 pre-shared-key *****
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup
**************** Configuration VPN AnyConnect (HQ) ****************
webvpn
enable outside-link-2
default-idle-timeout 60
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect profiles Remote_Connection_for_TS_Users disk0:/remote_connection_for_ts_users.xml
anyconnect enable
tunnel-group-list enable
access-list split-tunnel standard permit 192.168.1.0 255.255.255.0
access-list split-tunnel standard permit 192.168.15.0 255.255.255.0
access-list split-tunnel standard permit 10.0.0.0 255.255.255.0
group-policy clientgroup internal
group-policy clientgroup attributes
wins-server none
dns-server value 192.168.1.41
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value ipconnection.com.br
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect profiles value Remote_Connection_for_TS_Users type user
anyconnect ask none default anyconnect
tunnel-group sslgroup type remote-access
tunnel-group sslgroup general-attributes
address-pool vpnpool
authentication-server-group DC03
default-group-policy clientgroup
tunnel-group sslgroup webvpn-attributes
group-alias IPConnection-vpn-anyconnect enable
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookupHi,
the communication works when you send traffic from easyvpn branch side because it froms the IPSEC SA for local subnet and anyconnect HQ pool. The SA will only form when branch initiates the connection as this is dynamic peer connection to HQ ASA.
when there no SA between branch and HQ for this traffic, HQ ASA has no clue about where to send the traffic from anyconnect to branch network.
I hope it explains the cause.
Regards,
Abaji.
Maybe you are looking for
-
i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this
-
Sort a table with no index or key defined?
Greetz! I've got a script that builds a table, table A, by doing a select into. Later, a select is done on that table and an order by added. However the sort order is not persisting. Could this be due to there being no indexes or primary keys defined
-
Starting webstart with parameters?
Hi all, Just wondering if you can start up webstart with a number of parameters, eg. www.somesite.com/webapp.jnlp¶m1=a¶m2=b Can this be done? How does webstart treat the extra parameters? Does it pass it on to the main method as arguments? th
-
Although I have renamed and reorganized a number of documents, ghost documents still appear bearing the old names and in the old folders. Te same also happens in Numbers. This looks like a bug to me. Could it be fixed quickly please.
-
Is is possible to open event lists from different tracks at the same time in Logic Pro 9?
Is it possible to open event lists from two difference tracks in an arrangement at the same time in Logic Pro 9? When I switch between tracks the event list swiches as well. Thanks in advance.