2540 Lost communication
Hi there,
I have a very strange issue with a 2540 storage array. I have cam 6.9 running on Solaris and the array is running firmware 7.35. When I register the array it sees it ok however as soon as I finish the registration I lose communication with the array. However I can ping the array and I can also see the controllers and disk's etc within cam. I am also managing a 6540 on the same cam host which I have no issue with.
Can anybody assist?
Hi there,
I have a very strange issue with a 2540 storage array. I have cam 6.9 running on Solaris and the array is running firmware 7.35. When I register the array it sees it ok however as soon as I finish the registration I lose communication with the array. However I can ping the array and I can also see the controllers and disk's etc within cam. I am also managing a 6540 on the same cam host which I have no issue with.
Can anybody assist?
Similar Messages
-
2540 Lost Communication problem
Hi,
I came across a strange problem with two of Storagetek 2540s that we are using. When I check their status on CAM, it shows OK. But after a while, their status turns to "Lost Communication" all of a sudden. Once the network cables are unplugged and plugged back in, their status turns back to OK. I am using CAM 6.6.0.11, firmware is 07.35.55.
Has anybody encountered with this problem ? If did, please advise.
Thanks.Hi,
Are you printing via AirPrint? AirPrint is the native print functionality within the ipad. There are no test pages as such with the mobile device setup.
When both the mobile device and printer are connected to the same wifi network (or connected via wireless direct), the formatting etc. should be fine, provided the printer & print cartridge are in good health.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
Lost communication with the scanner of my LaserJet Pro CM1415 fnw color MFP with Windows 8.1
I have just upgraded my PC to Windows 8.1 (it came with Windows 8), and now I have "lost communication" with the scanner element of the CM1415...... The printer part is working fine!
I have read various fixes for other printers for 8.1, but does anyone have any experience with this particular model and this particular problem?
PS. The latest HP driver available for the CM1415 states that it is the same as the one delivered in the box.......Hi RTB2014,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to scan after updating the computer to Win 8.1.
I will be happy to help you.
Did you uninstall the printer software and reinstall the downloaded drivers?
If you didn't then I would uninstall and reinstall the downloaded drivers.
I have provided a URL to uninstall the printer software.
Fully uninstall the printer in Win 8.
You can download the newest drivers from this link. Select the operating system and click next.
HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
If you are still having issues I would download and run the Print and Scan Doctor since it might resolve the issue
automatically. Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
I believe that this will provide a resolution to your issue. Thank you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
I get a lost communication prompt when i export to youtube.
Also for another project I get no head room?I've tried everything, including exporting to Quicktime with the settings suggested by youtube...nothing seems to work and I keep getting the same message: Unable to Prepare Project for Publishing. The project could not be prepared for publishing because an error occurred. (-50)
The original name of the project had parenthesis and I even renamed it so now its just simply "Going Nowhere" -
hello
after having disconnected their cable networks for 2 hours,we lost communication with the ethernet port of the 2 controllers
Now after having reconnect network cables, ping does not respond and CAM also
any solution please, "we can't restart the array now"
thankshello
thank you for this answer, but we've already checked the status
both controller and switch link status are up
I tried many times by disconnecting and connecting cables
but unfortunately the same thing
is it possible to resolve the problem if we try a ping for 5 or 10 hours ??
thanks -
Hello...
I have one 6140 storage array ( firmware 06.60.22.10) connected to the management switch with two IP on each controller. One controller is 10.0.0.1 and the other one is 10.0.0.2 and the CAM ( 6.7.0.12) workstation (Solaris 10 SPARC 5/08 with latest EIS patches) is 10.0.0.3.
I was able to register the array before but now I can not browse it. The error message is "lost communication" re-register the array. I did this by deleting the array and re-register, but now I can not see it anymore.
I am able to ping both controllers from the workstation. sscs list array command list the previously registered array but sscs list array array1 fails.
Any clue? please help...Thanks for your help.
When I register via the second controller IP, CAM unable to see the array.
I tried to telnet to both IPs of port 2463, the messages is,
Trying 10.0.0.1....
Connected to 10.0.0.1.
Escape character is ...
Connection to 10.0.0.1 closed by foreign host.
I believe the connection ok.
Since I am running oracle 7/24 apps, I can not shutdown. I will try it in holidays and update.
Thanks and please let me know if any other methods are available through CLI like sscs.
Edited by: user4027740 on Oct 30, 2011 10:52 PM -
Lost communication with the printer
I have lost communication between the computer and the printer..it was printing just fine and it quit immediately
To have any hope of providing an answer we will need more information. Please read this post then provide some details. What printer model? What operating system? 32 bit or 64 bit? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Wrt54g v4 lost communication every day
Hi ,
Some help please!!.
I have two cases both usung router WRT54G V4 in different places. Both routers lose communication any time during the day, the solution unplug ad plug again the power in the router. After seconds everything works normally. But is not normal the communication gets lost and either I need restart the router to recover it. One of them is critical because it is losing communication every 2 or 3 hours, the other only one time during the day. What can I to do before to think in the idea of changing my wireless router for other brand???
Any idea is welcome!!You can try upgrading the router's firmware.Check this link for how to upgrade the router's firmware.
-
Running version: 7.4.00065. (yeah... I know.. upgrade.. again.)This seems to be an ongoing issue. So I started digging on our end as well. seems to have something to do with max pool size... Where/how to increase it?So I'm seeing a fair number of: C:/Program Files (x86)/Spiceworks/pkg/gems/scgi-0.9.1/lib/scgi.rb:233:in `block in handle_client'
W[15:03:01.34 2af0f4] check for ticket email url_ping: /tickets/check_email = unexpected response: Net::HTTPInternalServerError
W[15:03:03.67 04237c] [SCGI] Handling client Errno::EPIPE: Broken pipe, at:
C:/Program Files (x86)/Spiceworks/pkg/gems/rack-1.6.0/lib/rack/handler/scgi.rb:63:in `write'
and these: C:/Program Files (x86)/Spiceworks/pkg/gems/scgi-0.9.1/lib/scgi.rb:233:in `block in handle_client'
F[15:03:00.54 3a6e58] /!\ FAILSAFE /!\ 2015-07-15 15:03:00 -0400
Status: 500 Internal Server Error
This topic first appeared in the Spiceworks CommunityHi,
Do you create VMs on Hyper-V or VMWare? Based on research, possible causes could be:
1. Files changes in the volume is very huge. So the shadow size may be big and the current shadow storage my not able to hold it. And that’s cause the shadow copy creation failure.
2. The I/O in D drive is heavy and make the shadow copy I/O failed.
3. Server is too busy to handle the request.
4. The disk is heavily defragment.
Please refer to the articles to troubleshoot the issue:
Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and during times when there are high levels of input/output
http://support.microsoft.com/kb/826936/en-us
VSS timeouts during backup? What could contribute to that?
https://blogs.technet.com/b/askpfeplat/archive/2012/09/12/vss-timeouts-during-backup-check-fragmentation.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Lost communication with internet
I am using Windows 8 and I lost my safari and Internet Explorer connections. The following error message keeps appearing,"There was a problem communicating with the web proxy server (HTTP) CFURL ErrorDomain:360 How can I get back connected ?? My wireless priner connection ha been lost also
You might have had a piece of malware installed to your computer that changed your proxy settings. Please try this:
Open Start
Type: "Internet Options"
Select the Internet Options Control panel item from the list.
Go to the Connections tab.
Select the LAN Settings button
Uncheck the boxes for "Use a proxy server" and "Automatically detect settings" and then click OK out of all the windows.
If you can get online now, then awesome. I would STRONGLY recommend at this point downloading a copy of Malwarebytes from malwarebytes.org (the free version) and doing a full scan of your computer. Make sure you opt out of the free trial seen at the end of the Malwarebytes installer.
========
The first to bring me 1Gbps Fiber for $30/m wins! -
Yesterday I tried to begin a capture of material for a new project. After repeated attempts to reboot, examined all connections, I decided the RS-232 cable must have gone bad. Drove 140 RT to replace it. This morning I did and found no difference.
My next step was to upgrade the firmware on the Kona 3 board and did so. Ran Aja VTR Xchange - beautiful picture and synched time code but the one box says " NO VTR connected".....
Decided to try running FCP and open the Log and Capture window to see what it said. Same thing. Nice picture SMPTE time code appears to be fine- "No Communication". So ...
Now I am down to the deck controls and some hidden internal settings having changed somehow, or continued software incompatibility.
I will say that prior to this issue - I have had splendid synchronization between all of these devices.
FCP- 7.0.3
Kona 3-
Sony JH-3
It seems that one minute FCP setting is off now. I've gone through the Audio/ Video settings and will return to all the preferences settings. But I am confused and don't get it..
Thanks for any help solving this!HI Meg,
No the JH -3 is not a switchable on/off the RS-232 control port. I'll verify with Sony but I've gone through everything on the deck and menu. Unless it was damaged or fried the control board in some way I think I can eliminate the deck. So I am now going to go through all of the settings on the FCP panels and preferences. I must have done something when I used Soundflower to capture audio the other day...
That is all I can think of.....
I use a JH-3 as my play/capture deck as I am still shooting with the Sony HDW-730 - a **** fine camera. I've moved into 2k at 250 fps and 4k at up to 60 fps but for wildlife and specifically Birds... these new cameras are not ready yet. Not for what I do anyway!
If I can figure out what I've done I'll post it up here. I've got to figure it out for the next Job... !!!
TRB -
Hi,
I updated my Iphone last thuesday and since them my phone call drop one time on two? It's really really frustrating to have a such amont of drop call. The communication just stop and after I heard the beep sound who indicated that the line has drop. I just have a Iphone 3GS not a Iphone 4. Does anybody have the same problem?Dropped calls are mostly due to your carrier's network; but can also be due to obstructing the phone's antenna. Software can also be an issue, but the carrier's network is the biggest culprit typically.
-
Lost communication with DAQ (NI-6008) through labview
I currently use four USB-6008 devices through labview as part of a teststand. While troubleshooting a separate issue I lost the ability to communicate with the devices but only through labview. Using other NI software I can use the analog I/O but not from my labview program. I am a chemical engineer so I've already exhausted my limited computer knowledge, any help would be greatly appreciated.
If MAX can see the devices, and collect data thru them, then your hardware is OK.
(Max is the Measurement and Automation Xplorer program).
Assuming that's the case, then I would suspect a naming change. You can rename the devices in MAX, perhaps when you didn't mean to.
Check your ERROR outputs of the NI-DAQ calls. That's what they're there for. Put a probe on the ERROR outputs of INIT TASK, START TASK, whatever you're using.
The more professional programs expect those errors and handle them, if you're doing a one-off kind of thing, it's easy to think you don't need them, since it worked the first time out, but they really will give you info that you need right now.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks -
Lost communication with scanner
Up until yesterday, I had no problem using my networked Epson Artisan 830 printer/scanner to scan documents into Acrobat X Pro that I am running on Windows 7. However, today I keep on getting the following message: "Error while interacting with scanner: the selected scanner was not found." Photoshop and other programs have no problem identifying the scanner. In fact, I have no problem printing a file through Acrobat either. I have done all kinds of troubleshooting to no avail and am completely stomped. I would appreciate any and all help.
I am having the same problem. I had no problem creating a pdf through my HP scanjet 8200 and cannot find an answer anywhere.
-
Lost communication btw cs4 bridge and photoshop cs4
I cannot double click a thumb in the bridge and enter Photoshop cs4. It brings up the Microsoft viewer instead. Nothing I have tried corrects this. I can get to Photoshop cs4 through camera raw, but that means opening all jpegs and tiffs in raw. Can anyone help? Perhaps I will need to download the upgrade to cs4 again. But installing the plugins for fractals and NIK software can be a drag. I no longer have cs3, so I can't revert to it
I have Windows XP professional on a Dell, two 500 gig internal drives and a 500gig LaCie external drive
Thanks
PaulThat camera was recently supported for the first time by ACR 8.6, which needs at least CS6 to run. You will never be able to open those raw NEF files in CS4, as there will never be an update for CS4.
Your choices are to upgrade, or to use the free, stand-alone Adobe DNG Converter 8.6 on each and every batch of raw NEF files in order to convert them to raw DNGs that you can open in CS4.
Mac:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Windows:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
Maybe you are looking for
-
Computer not responding to iPhone 5c
I have an iPhone 5c, when I plug it into the computer it charges but doesn't do anything else. It doesn't ask to trust the computer on the phone, also it doesn't show the phone in iTunes or in My Computer.
-
Is it possible to install a bigger font in Firefox?
I got a new monitor with bigger resolution, so the text on screen is smaller. I like to have it bigger
-
Bug: Mail loses image metadata
When you use mail to send an image, the image loses its metadata. This is especially annoying with regard to losing the date the picture was taken. When mail sends images, even if it has to create images of a new size, it should retain the metadata a
-
drop triggers--- CREATE PROC [dbo].[SP_DropTriggers] AS BEGIN DECLARE @Table_Triggers SYSNAME, @trName sysname DECLARE Cursor_Disabletriggers CURSOR FOR SELECT object_name(parent_id) , name FROM sys.triggers OPEN Cursor_Disabletriggers FETCH
-
Hi , i have an issue here my copa datasource is not delta capable, how will I make it delta capable.I dont want to use an ODS here.please this is an urgent issue regards rak