2540 - more then 32 mappings to the host ?

Hello,
we decided to chunk the whole 2540 array space into 100 GB chunks. We got about 40 LUNs.
But we cannot map all to the host - only first 32 LUNs.
Does anybody know why ?

HI,
It is the limitation of the storage and you cant map more than 32 luns from the storage.
you wont get the option of lun number greater than 31 and 31 will be a phantom.

Similar Messages

I can not establish more then 1 call at the same time

Hi,
I have SPA9000 with four active accounts. I can not establish more then 1 call at the same time. Accounts are all in registered state. The field in SIP tab, Default Group Line:, is by default: 1,2,3,4 which means if line 1 is busy try the next one in the order ( in this case number 2). But this is not happening. It always tries to dial out with the first line (account). There is no problem with the provider and I don't want to specify groups of userID's and to assign them special line for dialing out.( by the way in this way it is possible to establish more parallel calls, but then each user will always have to dial thru specific line only). Please help me to find out if the SPA is faulty or give me some workaround, so that when I try to make a call , if one line is busy to dial out thru the next available.
P.S. I suspect that SPA9000 does not notice when the line is busy or not. Maybe there is some issue with the Control Timer Values (sec) on Regional tab.
Thanks,

no it can only be one person at a time

SAP is allowing miro more then one time against the single GRN

Hi All
Sap is allowing Miro more then one time against the GRN. We have done miro twice and it is still open for miro. In normal case after doing miro SAP shows zero value and qty in grn field in miro screen.
i want to ristrict his .
can any body tell me the process
Regards
Prakash

Hi,
Option-1:Use T.Code:OMRM & maintain the message M8 -081 as error,Quantities invoiced greater than goods receipt quantity as error [maintain GR-based IV in the PO item level ]
Option-2:Use T.code: OMRM & Maintain the message M8 -087 - Invoice quantity greater than PO quantity [item without GR] as error.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Jan 29, 2009 1:59 PM

I have FF and win7. Fonts turn to weird characters at more then 75% zoom when the checkbox "allow webpages to choose their own fonts" in the contents option advanced is checked, when forced to calibri this behaviour doesnt occur An aexample of that is

I have FF and win7. Fonts turn to weird characters at more then 75% zoom when the checkbox "allow webpages to choose their own fonts" in the contents option > advanced is checked, when forced to calibri this behaviour doesnt occur
An aexample of that is the product title on the product of this website:
https://www.xstreetsl.com/modules.php?name=Marketplace&file=item&ItemID=2424553
While switching to double check this I just saw that this also happens in this very window in wich i am typing my question now. If i copy and paste this text to for example notepad or anything else, it shows up like normal text.
== This happened ==
Every time Firefox opened
== i installed firefox on win 7

This issue can be caused by the bitmap version of the Helvetica or Geneva font or another (bitmap) font that can't be displayed by Firefox in that font size.
Firefox can't display that font in the specified size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or find a True type version of that font that doesn't have the problem.

Is there any way to send more then 1 parameter to the listener function?

Hi guys, so is there any way to send more then 1 parameter to the listener function?

Hi,
sure.
The first variant is to add many parameters to event.
The second variant is to extend calling callback functions.
For example,
public function addCallBack(eventName:String, callBack:Function = null, ... rest):void
     // save callBack function and event type and other args (rest)
     addEventListener(eventName, myHandler);
private function myHandler(event:Event):void
     // get function and args by eventName
     fnc.apply(null, [event, args]);

Object would have more then one attribute with the tag :VALUE

I'm creating a new component in Ultiboard - a 100 pin connector. This connector (Hirose) has 4 rows of 25 pins. Alternate rows are staggered. I'm trying to name each pin with it's appropiate name: A1, A2, A3 ....A50. Then B1, B2, B3 .....B50.
When I change the VALUE or NUMBER attribute, I get the DRC error message:
This action cannot be completed because the resulting Object would have more then one attribute with the tag :VALUE
Please remove one of the attributes and try again.
Okay, so I've tried deleting the tag and now I can't name the pin at all.
What am I missing?

You should be in the footprint editor to edit the pin name. Select tools>>Database>>Database Manager, highlight the component in your database and click on the Edit icon. In the footprint editor, double click on the pad and a SMT or THT pin Properties dialog appears, select the Attributes tab and highlight the Number row, press the change button and you should be able to change the pin name.
Tien P.
National Instruments

We just received our new mac and took it to the store to have the old files from our last computer transferred over. Now we can't find all our files. There was more then one user on the old machine. How can we find the files from the other users?

We need to find where the files for the other user on the computer are now located. There were two other users on the old machine, which was taken into the store and ALL files were suppose to be transferred over to this computer. HELP!

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

Can you have more then one iphone control the apple tv at the same time?

Can you have more then one iphone4 as a remote for one apple tv at the same time?

iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

Can you zoom in more then 100% without using the loop?

If you press the 'Z' key, your photo will zoom to 100%, but is there a way to zoom more then 100%? I know that I can use the loop tool to do that, but I'd prefer to just have my viewer display at 200% instead.
Thanks,
Kenny

If you display the image at full screen, then zoom, your image will appear to be way more magnified. Can't say exactly why.

Configure more then one device at the JMF??

Hello every body..
I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
I hobe that any one can hep me..
The problem:
If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
I don't know how i can solve this problem??
please help me !!
For reply or any information contact me at my e-mail
[email protected]

Thanks for reply sir omcgovern..
I read what you say but i wondered while this problem from 2003 there is no any solution to this problem??
Now , what i can do to trick this problem???
Please if there are any solutions help me as fast as can !!!!!

Priting more then one page in the layout

I can't print anymore more then 1 pages per layout of each printed page!
This happened from leopard. I have upgraded the system, then i did a archive & install trying to solve the problem, but there were no changes.
I can't print even from new just created users

Not sure this will help -- But at first I was not able to print more than one page on my EPSON STYLUS PHOTO R200 printer. When the page opened -- I had the Printer listed in the top Title space. After several attempts, i noticed there was a black arrow next to the Printer name -- I clicked on it to open and all of the application features including setting # of copies appeared. I seem to remember reading something that in Leopard 10.5 Printing is now tied to the application rather than the printer. Maybe this had something to do with it not appearing at first.
Only problem I have now is LEOPARD does not recognize my printer Utility software --for cleaning heads, determining ink levels, etc. I've e-mailed EPSON on this
Pete Collins

Ordering more then 2 ipads2 at the same address?

Hi guys.
Is it possibile? or I have to use another address to order the thrid ipad2?
Also how does apple detect whether im buying more then 2 ipads? by debit card? or by shipping address?
Please guys don't give an answer unless you are 100% sure. Because I don't want my money to be HELD by my credit card company for 30days if apple cancels the order:S
Message was edited by: Mohammad Fadin
Message was edited by: Mohammad Fadin

typo to*
Can you elaborate "2 per transaction"?
Do you mean different orders? because I still don't get why would apple doesn't allow ordering more then 2 ipads in 1 order but you can order another 2 ipads when creating a new order?
Also does apple usually deduct the ipad2 funds once the order placed? because it seems mine didn't

How can I load more then 1 img within the same Cell of datagrid?

Hi
I am using Flash CS3 datagrid component, I want to show more than one image in the same cell.
I m using LoadCellRenderer class extends UILoader implements ICellRenderer,
but it loads only one image in cell.
can any one guide me?
Thanks in advance.

Hi, kennethkawamoto2
I go through the on-going thread. and apply the code also but result is same,
Data Grid inbuilt Roll over , selected, selection -- events are disappear after apply custom CellRenderer class.
Any idea Why this happend?

When I starting my computer. I get more then one inbox at the bottom screen.

When starting up my computer. I get multiple in boxes. The icon has five in boxes. How do I fix this?
Thank you

Have you just started using Thunderbird, added a mail account and saw several Inbox?
or
have you been running thunderbird for a while and then these Inboxes just appeared?
Are there any emails in any of the Inbox 's?
Make sure you have View > Folders > All setting and post an image of your Folder Pane into this question, so that I can see what you are seeing.
Additional:
Is the mail account IMAP or POP?

It is possible to open the front panel of a subVI more then one time at the same moment?

I want to open a subvi´s front panel several times with each one operating independently. The subvi has a ring with several variables to choose to show in a graphic. The subvi is called from a button on the Main Front Panel. It is possible to, for instance, open the subvi and set it to show a temperature graphic and click again on the button to call another instance of the same subvi and select pressure for the graphic, keeping both new windows side by side? Will I still be able to access the Main Front Panel?

Yes you can. You have to use a .vit (VI template file). There's an example here. There's also been lot's of discussion on the subject. I think if you do a search for vit, you'll be able to find additional information and examples.

2540 - more then 32 mappings to the host ?

Similar Messages

Maybe you are looking for