256 GB SSD FDE in T400s... I can not see the harddrive in my bios

hi everyone
I want to reset the encryption key of my SSD with Full disk encription. But unfortunately i cannot see this option in my bios ( i update to the newest one already)
I found the answer
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68369
I should do the following:
Prepare a DOS bootable floppy disk and a floppy disk drive.
I have no idea how to do that... I dont even have a floppy disk (who has nowadays a floppy disk drive)
and i have no idea about Dos
I would be really thankful if someone could help me how to do it

Do you have a Mac? I know you said PC but technically a Mac is a PC.
I would try using Image Capture or iPhoto to import photos. If not, use a photo program that can get photos from your iPhone (it shows up as a camera device by default)
If that fails, Download a program called iExplorer. Plug your phone in and look for Media/DCIM/APPLE100/xxxx.mov file. It should stick out like a sore thumb if it's 11GB's in size. That directory is for the Camera Roll, unless you find it in another folder.

Similar Messages

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

HT3625 i can not see the line in/built in input on the menu?do you know why?

i can not see the line in/built in input on the menu?does anyone know why?
i am trying to broadcast a live dj mixing but with the set up, i cant find the lin in input not even on the menue.
any clues will be appreciated.

see shots from '11 to '12 going forward.

Can not see the report in report manager/admin tab

Hi,
in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
Thank you.

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Final user's can not see the data due to limited authorization.

We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location 0RT_LOCATIO.
0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
Does anyone how to do this (if possible)?
Thanks in advance!

Just do two things to find the authorization check failed for that user.
1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
Do this way, if it is not successful you can go for any other alternate way.
Hope this would help you.

Can not see the menu of New Business Components Package in jdeveloper

I am just follow the developer guide.
and when I create the Business Components Package, the guide said that
========================================
In the JDeveloper Navigator, select the OA Project where you want to create your package.
From the main menu, choose File > New to open the New Object Gallery.
In the Categories tree, expand the Business Tier node, and select Business Components (BC4J).
In the Items list, select Business Components Package to open the Business Components Package Wizard. You can also right-click on the OA Project and select New Business Components Package to navigate directly to the Business Components Package Wizard.
=====================================
In fact I can not see the menu about Business Components (BC4J) in the File/new/buisness tier/Business Components (BC4J).
I can only see the File/new/buisness tier/ADF Business Components.
And can not find the "Business Components Package" under ADF Business Components either.
I am using the JDev Extension for OA (p5856648_R12_GENERIC.zip) and EBS 12.0.0.
And I create an OA Workspace and OA Project.
can anyone help?

James,
Use search facility on forum. Chk thread Re: OAF Toolbox Tutorial Help - Search
--Shiv

Can not see the details of the task approved in UWL of ESS

Leave approver can not see the detail of the task approved such as the start and end date of the leave, number of days used, leave quota details of the applicant when he approved it.
Please give your advises!
Regards,

Hi!
Maybe these attributes are not being shown due to the fact that they might have been specified in the "List of Display Attribute to exclude from Preview/Detail area" attribute of the UWL iview currently being used.
As you can see in the Help page:
http://help.sap.com/saphelp_nw70/helpdata/de/0a/ad68c125ae496f8c04a25090bd2e3c/content.htm
It states the following about this attribute:
"Enter the names of the attributes which you want to hide from the display in the preview area. These names should be comma separated."
Maybe for the UWL iview currently being used it has been specified some values for this attribute, and so some information for the items such as the start and end date of the leave (along with the others you have mentioned) are not getting displayed in the preview area.
Hope this helps!
Best regards,
Armando Zaro

Can not see the device net Master Interface in my project.

Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
Are you able to hold the C key down when you reboot, to boot off the installation disk?

Can not see the new appending fields in RSA6

Hi,
I add one appending structure to existing datasource, after that I can not see the new field in RSA6, RSO2. However I can see it from RSA2 and SE11 (for extract structure).
Any idea?
Thanks
Victor

Victor,
can you tell me how u have done this. you have a DS in RSA6 created from RSO2. then you created a append structure right? then click on your DS on the RSA6 screen. click on change icon on the application tool bar or function key CTRL + SHIFT +F1, maintain the datasource.
can you able to see the fields here or not (i'm asking for change mode)?
Nagesh.

In Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed Downloaded much and now can not see how to fix it?

in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
Downloaded much and now can not see how to fix it?

I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue.

Can not see the option Execution with Data Change in the infoprovider?

Hi team,
i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report
i can not see the option "Execution with Data Change in the infoprovider",
i can only see 2 options
Direct scheduling in background process
create new scheduling
periodic,
is there any setting which i would be able to see the option "Execution with Data Change in the infoprovider"?
kindly assist

Hi Blusky ,
check the below given link.
http://help.sap.com/saphelp_nw04/Helpdata/EN/ec/0d0e405c538f5ce10000000a155106/frameset.htm
Regards,
Rohit Garg

I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?

I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?

Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941)

Question: 10gR2 database can not see the 11gR2 ASM diskgroup?

Hi there,
env:
uname -rm
2.6.18-92.1.22.el5xen x86_64
Single server(non-RAC)
note: we don't want to upgrade 10gr2 database into 11gR2 yet. But we created the 11gR2 ASM, then a 11gr2 database on ASM, and plan to migrate datafile in 10gR2 database to 11gR2 ASM
1. oracle 10gR2 installed first version: 10.2.0.3.0
2. then install 11gR2 Grid Infrastructure, and created ASM (version 11gr2)
$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Tue Oct 19 10:30:56 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> col name form a15
SQL> col COMPATIBILITY form a15
SQL> col DATABASE_COMPATIBILITY form a15
SQL> l
1* select name , STATE, COMPATIBILITY, DATABASE_COMPATIBILITY from v$asm_diskgroup
SQL> /
NAME STATE COMPATIBILITY DATABASE_COMPAT
ORCL_DATA1 MOUNTED 11.2.0.0.0 10.1.0.0.0
ORA_DATA MOUNTED 10.1.0.0.0 10.1.0.0.0
3. in 10gR2 database
sqlplus /
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Oct 19 12:12:31 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select * from v$asm_diskgroup;
no rows selected
4. pin the node into css
# /u01/app/product/11.2.0/grid/bin/crsctl pin css -n mynodename
CRS-4000: Command Pin failed, or completed with errors.
Question: 10gR2 database can not see the 11gR2 ASM diskgroup?
please help
Thanks
Scott

What is the output of
olsnodes -t -n
Also, see unix error log and ohasd error log if you find anything in that

256 GB SSD FDE in T400s... I can not see the harddrive in my bios

Similar Messages

Maybe you are looking for