"2597/6x1 Terminated Mux" fails to initialize

I am using the 1x6 terminated RF Switch 'NI-PXI 2597' in the 1045 chassis.
The 2597 fails to initialize (niSwitch Initialize With Topology.vi) with the following error:
niSwitch Initialize With Topology.vi
No legacy device supports the specified topology.  Use a different topology, or configure the device under DAQmx and use the DAQmx resource descriptor.
Status Code: -1074118644
My other switches (2596, 2599, 2598) initialize without issue.
I can set the switches via 'switchsoft front panel' in MAX. The LabVIEW .vi aren't working.
vi's are located at: C:\Program Files\National Instruments\LabVIEW 8.2\instr.lib\niSwitch\niSwitch.LLB\{vi's}
Picture of setup below.
Attachments:
PXI_RF Switch Setup.jpg ‏3199 KB

Hello,
You may have your VISA resource name conflicting with the DAQmx resource name. I would recommend looking at this KnowledgeBase article, which describes the problem you are seeing and two possible solutions. 
This article also describes what can happen with conflicting resource names.
Jake H | Applications Engineer | National Instruments

Similar Messages

  • [Closed]Bumblebee - Failed to initialize the NVIDIA GPU

    Hi,
    I'am having trouble with bumblebee. When i ran
    optirun glxgears -info
    I get the following error,
    [ 66.574]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 66.574] X Protocol Version 11, Revision 0
    [ 66.574] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 66.574] Current Operating System: Linux archlinux 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
    [ 66.574] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2136b55a-3c0b-4a13-a536-86d195e15fa8 ro
    [ 66.574] Build Date: 01 July 2013 10:48:42AM
    [ 66.574]
    [ 66.574] Current version of pixman: 0.30.0
    [ 66.574] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 66.574] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 66.574] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Jul 30 19:25:29 2013
    [ 66.589] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 66.589] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
    [ 66.607] (==) ServerLayout "Layout0"
    [ 66.607] (==) No screen section available. Using defaults.
    [ 66.607] (**) |-->Screen "Default Screen Section" (0)
    [ 66.607] (**) | |-->Monitor "<default monitor>"
    [ 66.607] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 66.607] (**) | |-->Device "DiscreteNvidia"
    [ 66.607] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 66.607] (**) Option "AutoAddDevices" "false"
    [ 66.607] (**) Option "AutoAddGPU" "false"
    [ 66.607] (**) Not automatically adding devices
    [ 66.607] (==) Automatically enabling devices
    [ 66.607] (**) Not automatically adding GPU devices
    [ 66.607] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 66.607] Entry deleted from font path.
    [ 66.607] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 66.607] Entry deleted from font path.
    [ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 66.607] Entry deleted from font path.
    [ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 66.607] Entry deleted from font path.
    [ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 66.607] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 66.607] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
    [ 66.607] (==) |-->Input Device "<default pointer>"
    [ 66.607] (==) |-->Input Device "<default keyboard>"
    [ 66.607] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 66.607] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 66.607] (II) Loader magic: 0x7fdc20
    [ 66.607] (II) Module ABI versions:
    [ 66.607] X.Org ANSI C Emulation: 0.4
    [ 66.607] X.Org Video Driver: 14.1
    [ 66.607] X.Org XInput driver : 19.1
    [ 66.607] X.Org Server Extension : 7.0
    [ 66.607] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 66.608] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 66.608] setversion 1.4 failed
    [ 66.609] (--) PCI:*(0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 66.609] Initializing built-in extension Generic Event Extension
    [ 66.609] Initializing built-in extension SHAPE
    [ 66.609] Initializing built-in extension MIT-SHM
    [ 66.609] Initializing built-in extension XInputExtension
    [ 66.609] Initializing built-in extension XTEST
    [ 66.609] Initializing built-in extension BIG-REQUESTS
    [ 66.609] Initializing built-in extension SYNC
    [ 66.609] Initializing built-in extension XKEYBOARD
    [ 66.609] Initializing built-in extension XC-MISC
    [ 66.609] Initializing built-in extension SECURITY
    [ 66.609] Initializing built-in extension XINERAMA
    [ 66.609] Initializing built-in extension XFIXES
    [ 66.609] Initializing built-in extension RENDER
    [ 66.609] Initializing built-in extension RANDR
    [ 66.609] Initializing built-in extension COMPOSITE
    [ 66.609] Initializing built-in extension DAMAGE
    [ 66.609] Initializing built-in extension MIT-SCREEN-SAVER
    [ 66.609] Initializing built-in extension DOUBLE-BUFFER
    [ 66.609] Initializing built-in extension RECORD
    [ 66.609] Initializing built-in extension DPMS
    [ 66.609] Initializing built-in extension X-Resource
    [ 66.609] Initializing built-in extension XVideo
    [ 66.609] Initializing built-in extension XVideo-MotionCompensation
    [ 66.609] Initializing built-in extension XFree86-VidModeExtension
    [ 66.609] Initializing built-in extension XFree86-DGA
    [ 66.609] Initializing built-in extension XFree86-DRI
    [ 66.609] Initializing built-in extension DRI2
    [ 66.609] (II) LoadModule: "glx"
    [ 66.622] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
    [ 67.248] (II) Module glx: vendor="NVIDIA Corporation"
    [ 67.248] compiled for 4.0.2, module version = 1.0.0
    [ 67.248] Module class: X.Org Server Extension
    [ 67.248] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
    [ 67.257] Loading extension GLX
    [ 67.257] (II) LoadModule: "nvidia"
    [ 67.258] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 67.346] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 67.346] compiled for 4.0.2, module version = 1.0.0
    [ 67.346] Module class: X.Org Video Driver
    [ 67.354] (II) LoadModule: "mouse"
    [ 67.354] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 67.357] (II) Module mouse: vendor="X.Org Foundation"
    [ 67.357] compiled for 1.14.0, module version = 1.9.0
    [ 67.357] Module class: X.Org XInput Driver
    [ 67.357] ABI class: X.Org XInput driver, version 19.1
    [ 67.357] (II) LoadModule: "kbd"
    [ 67.358] (WW) Warning, couldn't open module kbd
    [ 67.358] (II) UnloadModule: "kbd"
    [ 67.358] (II) Unloading kbd
    [ 67.358] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 67.358] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
    [ 67.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 67.359] (--) using VT number 7
    [ 67.367] (II) Loading sub module "fb"
    [ 67.367] (II) LoadModule: "fb"
    [ 67.367] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 67.367] (II) Module fb: vendor="X.Org Foundation"
    [ 67.368] compiled for 1.14.2, module version = 1.0.0
    [ 67.368] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 67.368] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 67.368] (II) Loading sub module "wfb"
    [ 67.368] (II) LoadModule: "wfb"
    [ 67.368] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 67.376] (II) Module wfb: vendor="X.Org Foundation"
    [ 67.376] compiled for 1.14.2, module version = 1.0.0
    [ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 67.377] (II) Loading sub module "shadow"
    [ 67.377] (II) LoadModule: "shadow"
    [ 67.377] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 67.377] (II) Module shadow: vendor="X.Org Foundation"
    [ 67.377] compiled for 1.14.2, module version = 1.1.0
    [ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 67.377] (II) Loading sub module "ramdac"
    [ 67.377] (II) LoadModule: "ramdac"
    [ 67.377] (II) Module "ramdac" already built-in
    [ 67.378] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 67.378] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 67.378] (==) NVIDIA(0): RGB weight 888
    [ 67.378] (==) NVIDIA(0): Default visual is TrueColor
    [ 67.378] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 67.378] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 67.378] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
    [ 67.379] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
    [ 67.379] (**) NVIDIA(0): Enabling 2D acceleration
    [ 67.379] (**) NVIDIA(0): Ignoring EDIDs
    [ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
    [ 67.379] (**) NVIDIA(0): mode
    [ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 72.511] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 72.511] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 72.511] (EE) NVIDIA(0): README for additional information.
    [ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 72.511] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 72.512] (II) UnloadModule: "nvidia"
    [ 72.512] (II) UnloadSubModule: "shadow"
    [ 72.512] (II) UnloadSubModule: "wfb"
    [ 72.512] (II) UnloadSubModule: "fb"
    [ 72.512] (EE) Screen(s) found, but none have a usable configuration.
    [ 72.512] (EE)
    Fatal server error:
    [ 72.512] (EE) no screens found(EE)
    [ 72.512] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 72.512] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    [ 72.512] (EE)
    [ 72.512] (EE) Server terminated with error (1). Closing log file.
    This is /etc/bumblebee/bumblebee.conf file;
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    In addition
    dmesg | grep nvidia
    does not return anything and
    modprobe nvidia
    returns
    modprobe: ERROR: could not insert 'nvidia': No such device
    There is no /etc/X11/xorg.conf file.
    Last edited by Selo (2013-07-30 19:41:25)

    Hello, I also I have that problem.
    $primusrun glxgears
    primus: fatal: Bumblebee daemon reported: error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
    $grep -Fn '(EE' /var/log/Xorg.8.log
    15: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    105:[ 875.659] (EE) Failed to load module "mouse" (module does not exist, 0)
    110:[ 875.659] (EE) Failed to load module "kbd" (module does not exist, 0)
    153:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    154:[ 880.312] (EE) NVIDIA(0): check your system's kernel log for additional error
    155:[ 880.312] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    156:[ 880.312] (EE) NVIDIA(0): README for additional information.
    157:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    158:[ 880.312] (EE) NVIDIA(0): Failing initialization of X screen 0
    163:[ 880.312] (EE) Screen(s) found, but none have a usable configuration.
    164:[ 880.312] (EE)
    166:[ 880.312] (EE) no screens found(EE)
    167:[ 880.312] (EE)
    171:[ 880.312] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    172:[ 880.313] (EE)
    173:[ 880.313] (EE) Server terminated with error (1). Closing log file.

  • [Solved] Failed to initialize the NVIDIA kernel module

    Hi all,
    I've just made the jump to arch and have a fresh install. I'm having trouble getting the nvidia drivers to work. I am currently using the nouveau drivers without issue.
    The method I am using - after much trial - is:
    - uninstall nouveau and mesa lib
    - install nvidia package
    - remove nouveau module entry in mkinitcpio.conf
    - run `mkinitcpio -p linux`
    - edit .conf in xorg.conf.d with minimal required settings. Currently:
    Section "Device"
    Identifier "device0"
    Driver "nvidia"
    BusID "PCI:1:0:0"
    EndSection
    I have installed the linux-headers package and tried reinstalling nvidia again
    Card:
    01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
    Kernel:
    3.12.6-1-ARCH
    My Xorg.0.log looks like:
    [ 3.979]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 3.979] X Protocol Version 11, Revision 0
    [ 3.979] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 3.979] Current Operating System: Linux arch.tempera 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
    [ 3.979] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
    [ 3.979] Build Date: 13 December 2013 03:11:42PM
    [ 3.979]
    [ 3.979] Current version of pixman: 0.32.4
    [ 3.979] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 3.979] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 3.979] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 4 21:29:46 2014
    [ 3.980] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 3.980] (==) No Layout section. Using the first Screen section.
    [ 3.980] (==) No screen section available. Using defaults.
    [ 3.980] (**) |-->Screen "Default Screen Section" (0)
    [ 3.980] (**) | |-->Monitor "<default monitor>"
    [ 3.981] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 3.981] (**) | |-->Device "device0"
    [ 3.981] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 3.981] (==) Automatically adding devices
    [ 3.981] (==) Automatically enabling devices
    [ 3.981] (==) Automatically adding GPU devices
    [ 3.984] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 3.984] Entry deleted from font path.
    [ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 3.984] Entry deleted from font path.
    [ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 3.984] Entry deleted from font path.
    [ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 3.984] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 3.984] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 3.984] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 3.984] (II) Loader magic: 0x7fec20
    [ 3.984] (II) Module ABI versions:
    [ 3.984] X.Org ANSI C Emulation: 0.4
    [ 3.984] X.Org Video Driver: 14.1
    [ 3.984] X.Org XInput driver : 19.1
    [ 3.984] X.Org Server Extension : 7.0
    [ 3.985] (--) PCI:*(0:1:0:0) 10de:0dc4:19da:1184 rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 3.986] Initializing built-in extension Generic Event Extension
    [ 3.986] Initializing built-in extension SHAPE
    [ 3.986] Initializing built-in extension MIT-SHM
    [ 3.986] Initializing built-in extension XInputExtension
    [ 3.986] Initializing built-in extension XTEST
    [ 3.986] Initializing built-in extension BIG-REQUESTS
    [ 3.986] Initializing built-in extension SYNC
    [ 3.986] Initializing built-in extension XKEYBOARD
    [ 3.986] Initializing built-in extension XC-MISC
    [ 3.986] Initializing built-in extension SECURITY
    [ 3.986] Initializing built-in extension XINERAMA
    [ 3.986] Initializing built-in extension XFIXES
    [ 3.986] Initializing built-in extension RENDER
    [ 3.986] Initializing built-in extension RANDR
    [ 3.986] Initializing built-in extension COMPOSITE
    [ 3.986] Initializing built-in extension DAMAGE
    [ 3.986] Initializing built-in extension MIT-SCREEN-SAVER
    [ 3.986] Initializing built-in extension DOUBLE-BUFFER
    [ 3.986] Initializing built-in extension RECORD
    [ 3.986] Initializing built-in extension DPMS
    [ 3.986] Initializing built-in extension X-Resource
    [ 3.986] Initializing built-in extension XVideo
    [ 3.986] Initializing built-in extension XVideo-MotionCompensation
    [ 3.986] Initializing built-in extension XFree86-VidModeExtension
    [ 3.986] Initializing built-in extension XFree86-DGA
    [ 3.986] Initializing built-in extension XFree86-DRI
    [ 3.986] Initializing built-in extension DRI2
    [ 3.986] (II) LoadModule: "glx"
    [ 3.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4.075] (II) Module glx: vendor="NVIDIA Corporation"
    [ 4.075] compiled for 4.0.2, module version = 1.0.0
    [ 4.075] Module class: X.Org Server Extension
    [ 4.075] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
    [ 4.076] Loading extension GLX
    [ 4.076] (II) LoadModule: "nvidia"
    [ 4.076] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 4.082] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 4.082] compiled for 4.0.2, module version = 1.0.0
    [ 4.082] Module class: X.Org Video Driver
    [ 4.083] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
    [ 4.083] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 4.083] (++) using VT number 7
    [ 4.090] (II) Loading sub module "fb"
    [ 4.090] (II) LoadModule: "fb"
    [ 4.090] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4.091] (II) Module fb: vendor="X.Org Foundation"
    [ 4.091] compiled for 1.14.5, module version = 1.0.0
    [ 4.091] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4.091] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 4.091] (II) Loading sub module "wfb"
    [ 4.091] (II) LoadModule: "wfb"
    [ 4.091] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 4.092] (II) Module wfb: vendor="X.Org Foundation"
    [ 4.092] compiled for 1.14.5, module version = 1.0.0
    [ 4.092] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4.092] (II) Loading sub module "ramdac"
    [ 4.092] (II) LoadModule: "ramdac"
    [ 4.092] (II) Module "ramdac" already built-in
    [ 4.093] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4.093] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 4.093] (==) NVIDIA(0): RGB weight 888
    [ 4.093] (==) NVIDIA(0): Default visual is TrueColor
    [ 4.093] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 4.094] (**) NVIDIA(0): Enabling 2D acceleration
    [ 4.095] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
    [ 4.095] (EE) NVIDIA(0): system's kernel log for additional error messages and
    [ 4.095] (EE) NVIDIA(0): consult the NVIDIA README for details.
    [ 4.095] (EE) NVIDIA(0): *** Aborting ***
    [ 4.095] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 4.095] (II) UnloadModule: "nvidia"
    [ 4.095] (II) UnloadSubModule: "wfb"
    [ 4.095] (II) UnloadSubModule: "fb"
    [ 4.095] (EE) Screen(s) found, but none have a usable configuration.
    [ 4.095] (EE)
    Fatal server error:
    [ 4.095] (EE) no screens found(EE)
    [ 4.095] (EE)
    Please consult the The X.Org Foundation support
    at [url]http://wiki.x.org[/url]
    for help.
    [ 4.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 4.095] (EE)
    [ 4.107] (EE) Server terminated with error (1). Closing log file.
    The only entry I found in `dmesg | grep nvidia` related to nvidia-drm, and seemed to say it was loaded successfully. I didn't save the exact entry and i've reinstalled nouveau now so that I could post this.
    Any help much appriciated. I've been at this for a while. Learning a lot in the process!
    Last edited by gnibbler (2014-01-04 22:31:49)

    Success! Several days of trying various things and I finally give in and make a post to this forum. One more attempt - which was only really so that I could add modprobe info to this post - and it works.
    I had at some stage installed the driver xf86-video-nv, and this may have been causing the clash. I un-installed it, and followed the procedure above to reinstall nvidia.
    I think the main hang up I'd had is that I had not been rebuilding my kernel image with mkinitcpio after installing nvidia during my previous attempts.
    I hope some info in here helps some other stuck archer.
    Edit: Thanks graysky. I had found the right nvidia driver using the arch wiki and followed this advice to remove the nouveau hook. Much appriciated.
    Last edited by gnibbler (2014-01-04 22:35:00)

  • [Bumblebee]Failed to initialize the NVIDIA GPU at PCI:1:0:0.

    Hi!
    I've instaled Arch about a month ago and now wanted to check my nvidia card using Bumblebee, but have some errors…
    [wicu@arch:~]$ optirun -vv minecraft
    [ 4859.259278] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [ 4859.404191] [DEBUG]optirun version 3.0.1 starting...
    [ 4859.404220] [DEBUG]Active configuration:
    [ 4859.404226] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [ 4859.404242] [DEBUG] X display: :8
    [ 4859.404254] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
    [ 4859.404265] [DEBUG] Socket path: /var/run/bumblebee.socket
    [ 4859.404276] [DEBUG] VGL Compression: proxy
    [ 4859.536971] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 4859.537027] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 4859.537053] [DEBUG]Socket closed.
    [ 4859.537086] [ERROR]Aborting because fallback start is disabled.
    [ 4859.537094] [DEBUG]Killing all remaining processes.
    [wicu@arch:~]$ sudo journalctl // here is only part when I tried use bumblebee
    Nov 26 17:48:43 arch kernel: NVRM: failed to copy vbios to system memory.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238670] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238729] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238765] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238819] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238826] [ERROR][XORG] (EE) NVIDIA(0): check your system's kernel log for additional error
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238830] [ERROR][XORG] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238835] [ERROR][XORG] (EE) NVIDIA(0): README for additional information.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238841] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238847] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238853] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238858] [ERROR][XORG] (EE)
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238863] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238868] [ERROR][XORG] (EE)
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238873] [ERROR]X did not start properly
    Nov 26 17:48:43 arch kernel: NVRM: RmInitAdapter failed! (0x30:0xffffffff:739)
    Nov 26 17:48:43 arch kernel: NVRM: rm_init_adapter(0) failed
    // xorg log
    [ 4859.510]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 4859.511] X Protocol Version 11, Revision 0
    [ 4859.511] Build Operating System: Linux 3.6.3-1-ARCH x86_64
    [ 4859.511] Current Operating System: Linux arch 3.6.7-1-ARCH #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012 x86_64
    [ 4859.511] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70a6cff9-bcf7-42eb-9ba1-73953e023617 ro quiet
    [ 4859.511] Build Date: 08 November 2012 07:09:29PM
    [ 4859.511]
    [ 4859.511] Current version of pixman: 0.28.0
    [ 4859.511] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4859.511] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4859.511] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 26 18:00:43 2012
    [ 4859.511] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 4859.511] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4859.511] (==) ServerLayout "Layout0"
    [ 4859.512] (==) No screen section available. Using defaults.
    [ 4859.512] (**) |-->Screen "Default Screen Section" (0)
    [ 4859.512] (**) | |-->Monitor "<default monitor>"
    [ 4859.512] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 4859.512] (**) | |-->Device "Device1"
    [ 4859.512] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 4859.512] (**) Option "AutoAddDevices" "false"
    [ 4859.512] (**) Not automatically adding devices
    [ 4859.512] (==) Automatically enabling devices
    [ 4859.512] (==) Automatically adding GPU devices
    [ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 4859.512] Entry deleted from font path.
    [ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 4859.512] Entry deleted from font path.
    [ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 4859.512] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 4859.512] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
    [ 4859.512] (==) |-->Input Device "<default pointer>"
    [ 4859.512] (==) |-->Input Device "<default keyboard>"
    [ 4859.512] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 4859.512] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 4859.512] (II) Loader magic: 0x7fcc40
    [ 4859.512] (II) Module ABI versions:
    [ 4859.512] X.Org ANSI C Emulation: 0.4
    [ 4859.513] X.Org Video Driver: 13.1
    [ 4859.513] X.Org XInput driver : 18.0
    [ 4859.513] X.Org Server Extension : 7.0
    [ 4859.513] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4859.513] setversion 1.4 failed
    [ 4859.516] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
    [ 4859.516] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4859.516] Initializing built-in extension Generic Event Extension
    [ 4859.516] Initializing built-in extension SHAPE
    [ 4859.516] Initializing built-in extension MIT-SHM
    [ 4859.516] Initializing built-in extension XInputExtension
    [ 4859.516] Initializing built-in extension XTEST
    [ 4859.516] Initializing built-in extension BIG-REQUESTS
    [ 4859.516] Initializing built-in extension SYNC
    [ 4859.516] Initializing built-in extension XKEYBOARD
    [ 4859.516] Initializing built-in extension XC-MISC
    [ 4859.516] Initializing built-in extension SECURITY
    [ 4859.516] Initializing built-in extension XINERAMA
    [ 4859.516] Initializing built-in extension XFIXES
    [ 4859.516] Initializing built-in extension RENDER
    [ 4859.516] Initializing built-in extension RANDR
    [ 4859.516] Initializing built-in extension COMPOSITE
    [ 4859.516] Initializing built-in extension DAMAGE
    [ 4859.516] Initializing built-in extension MIT-SCREEN-SAVER
    [ 4859.516] Initializing built-in extension DOUBLE-BUFFER
    [ 4859.516] Initializing built-in extension RECORD
    [ 4859.516] Initializing built-in extension DPMS
    [ 4859.516] Initializing built-in extension X-Resource
    [ 4859.516] Initializing built-in extension XVideo
    [ 4859.516] Initializing built-in extension XVideo-MotionCompensation
    [ 4859.516] Initializing built-in extension XFree86-VidModeExtension
    [ 4859.516] Initializing built-in extension XFree86-DGA
    [ 4859.516] Initializing built-in extension XFree86-DRI
    [ 4859.516] Initializing built-in extension DRI2
    [ 4859.516] (II) LoadModule: "glx"
    [ 4859.516] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
    [ 4859.526] (II) Module glx: vendor="NVIDIA Corporation"
    [ 4859.526] compiled for 4.0.2, module version = 1.0.0
    [ 4859.526] Module class: X.Org Server Extension
    [ 4859.526] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
    [ 4859.526] Loading extension GLX
    [ 4859.526] (II) LoadModule: "nvidia"
    [ 4859.526] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 4859.526] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 4859.526] compiled for 4.0.2, module version = 1.0.0
    [ 4859.526] Module class: X.Org Video Driver
    [ 4859.526] (II) LoadModule: "mouse"
    [ 4859.527] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 4859.527] (II) Module mouse: vendor="X.Org Foundation"
    [ 4859.527] compiled for 1.13.0, module version = 1.8.1
    [ 4859.527] Module class: X.Org XInput Driver
    [ 4859.527] ABI class: X.Org XInput driver, version 18.0
    [ 4859.527] (II) LoadModule: "kbd"
    [ 4859.527] (WW) Warning, couldn't open module kbd
    [ 4859.527] (II) UnloadModule: "kbd"
    [ 4859.527] (II) Unloading kbd
    [ 4859.527] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 4859.527] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
    [ 4859.527] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 4859.527] (--) using VT number 7
    [ 4859.527] (II) Loading sub module "wfb"
    [ 4859.527] (II) LoadModule: "wfb"
    [ 4859.527] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 4859.527] (II) Module wfb: vendor="X.Org Foundation"
    [ 4859.527] compiled for 1.13.0, module version = 1.0.0
    [ 4859.527] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4859.527] (II) Loading sub module "ramdac"
    [ 4859.527] (II) LoadModule: "ramdac"
    [ 4859.527] (II) Module "ramdac" already built-in
    [ 4859.527] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4859.527] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 4859.527] (==) NVIDIA(0): RGB weight 888
    [ 4859.527] (==) NVIDIA(0): Default visual is TrueColor
    [ 4859.527] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 4859.527] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 4859.528] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 4859.528] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
    [ 4859.528] (**) NVIDIA(0): Enabling 2D acceleration
    [ 4859.528] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
    [ 4859.528] (**) NVIDIA(0): Ignoring EDIDs
    [ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 4859.534] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 4859.534] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 4859.534] (EE) NVIDIA(0): README for additional information.
    [ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 4859.534] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 4859.534] (II) UnloadModule: "nvidia"
    [ 4859.534] (II) UnloadSubModule: "wfb"
    [ 4859.534] (EE) Screen(s) found, but none have a usable configuration.
    [ 4859.534]
    Fatal server error:
    [ 4859.534] no screens found
    [ 4859.534] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 4859.534] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    [ 4859.534] (EE)
    [ 4859.534] Server terminated with error (1). Closing log file.
    [wicu@arch:~]$ lspci | grep VGA
    3:00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    14:01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
    [wicu@arch:~]$ primusrun minecraft
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    asdf
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    27 achievements
    208 recipes
    Setting user: Druedain, -4246576297828159265
    primus: fatal: failure contacting bumblebee daemon
    [18:05:39 - wicu@arch:~]$ primusrun minecraft
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    asdf
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    27 achievements
    208 recipes
    Setting user: Druedain, -7896572405277476304
    primus: fatal: failure contacting bumblebee daemon
    [wicu@arch:~]$ systemctl | grep bumblebee
    35:bumblebeed.service

    [wicu@arch:~]$ dmesg | grep nvidia
    782:[ 6.776816] nvidia: module license 'NVIDIA' taints kernel.
    784:[ 6.784411] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [wicu@arch:~]$ cat /etc/bumblebee/bumblebee.conf
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    Module=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    [wicu@arch:~]$ cat /etc/bumblebee/xorg.conf.nvidia
    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "ConnectedMonitor" "DFP"
    EndSection

  • "Installer Failed To Initialize"? After Effects CS5 Mac, Help!!!

    I'm in serious need of some help here. I downloaded the After Effects CS5 trial, but when I go and try to install it I get an error:
    "Installer Failed To Initialize. Please Download Adobe Support Advisor To Detect The Problem"
    I already tried Adobe Support Advisor, but it didn't detect any problems.
    I tried re-downloading the file again, but still no luck.
    I'm running an iMac with Mac OS X 10.6.2, Intel Core 2 Duo Processor.
    Can anyone please help me?

    Hi.  I see this thread is old...last post is july 2010.  However, since I just had a similar issue and since a google search brought me here, i figure id share my info with other who my hit this too...
    i have os x 10.7 and am trying to install cs5.5 master collection.  i kept getting the installer failed to initialize error.
    by looking at the PDApp.log, i saw an error and fixed the issue causing the error...
    my issue was when launching Install.app, it looks for ~/Applications and creates a folder "Adobe" in it.  I had an alias in my home dir and the log showed the installer didnt see it as a valid directory.
    by removing the alias, the installer then created the folder "~/Applications/Adobe" for me.  However, since it created an empty folder named Applications, separate from the actual /Applications dir, this was not acceptible.
    So, if i right click on /Applications and hit "Make alias" and move that to my home dir...same issue.
    But, if i open Terminal.app and type "sudo ln -s /Applications" the seemingly same type of alias or "symbolic link" is created, but instead the installer see the dir as valid, and the install went flawlessly.
    Hope this helps someone.

  • Photoshop CS5 installation trouble - ' Installer failed to initialize '

    Greetings,
    Having trouble with a CS5 photoshop installation on my 4,1 2.5ghz 6gb RAM MBP.  Download goes fine, disc mounts to machine, but I get stuck on the ' Installer failed to initialize' page.  Downloaded the reccomended support advisor app, which cannot find a solution to my problem.
    The log reveals the error:
    [FATAL] Setup - Unable to copy PDAppFlex.swf one level up.
    Not sure where to go from here.  I've downloaded the dmg 2x, done numerous restarts, tried the cs5 cleanup tool, repair permissions....no dice.
    I should mention  that I have a 48gb SSD with my OS (10.6.3) as well as a 200gb drive which has my user account on it, separate from the OS.  Not sure if this is part of the issue?
    Thanks in advance,
    Kyle

    In order to test the utility perform the following steps -
    Goto /Applications/Utilities and launch Terminal application. This will open a window and show you the command prompt like machine-name: user$. ditto is a command to copy files, so type ditto then drag a file to the terminal, and drag a folder to the terminal. This will create a command similar to -
    ditto /Users/username/Desktop/fileToCopy.txt /Users/username/Desktop/folder/
    Now hit return to run the command. If the command succeedes you will not see any error on the terminal and the file (as fileToCopy.txt) will get copied to destination folder (as /Users/username/Desktop/folder/)
    In case you see any error on the terminal or the file is not getting copied to the destination folder, 'ditto' might be corrupted.

  • CS6 design premium installer failed to initialize

    This occured while installing CS6 design premium suite for terachers/students in MAC OSX 10.8.4. Downloaded Adobe support adivsor but did not report any problems. I have NO OTHER Adobe products presently installed. What next?

    Sumit :
    The link
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5
    -cs5.html
    <http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html> 
    indicates  the summary log file should exist in the directory
    /Library/Logs/Adobe/Installers/
    No CS6 log file exists in this directory.In a terminal window, doing ls
    -l /Library/Logs/Adobe/Installers/ lists no log file associated with CS6.
    Then I took a look at the file, ~/Library/Logs/PDApp.log which I attach.
    There is a FATAL error:
    Adobe Application Manager executable does not exist at the location:
    /Users/William/Applications/Adobe/OOBE/PDApp//core/PDApp.app/Contents/MacOS/PDApp
    The directory /Users/William/Applications exists but there is nothing in
    it.
    What do you recommend doing?
    So then I took a look at
    >
          Re: CS6 design premium installer failed to initialize
    created by Sumit Singh <http://forums.adobe.com/people/Sumit+Singh> in
    /Downloading, Installing, Setting Up/ - View the full discussion
    <http://forums.adobe.com/message/5656970#5656970

  • Adobe Photoshop CS5 "Installer failed to initialize"

    Hey!
    So i Just downloaded CS5, I Open the .dmg and then i click on the install and i get a message which says "Installer failed to initialize".
    According to the support app this is the reason:
    "cpsid_83570: Conflicting processes running while installing - Creative Suite 5"
    I have tried Rebooting and closing all applications but i cant get it to work.
    I shall hasten to add that the first time i ever opened it up it worked but i had to cancel while it was installing.
    Thank you
    —Alex
    www.alexodam.com

    I have tried this path in terminal:
    sudo <Alexander Odam's MacBook/Macintosh HD/Users/Alex/Documents/Adobe Photoshop CS5/Install.app>/Contents/MacOS/Install
    But nothing happens:
    Is there something i am doing wrong?
    Thanks
    —Alex

  • Failed to initialize SessionFactory for database 'eacstore'

    Hi,
    I've installed Oracle Endeca Commerce version 3.1.2 on Linux (CentOS 5.9) by using all the default values (hostname: localhost and port numbers)
    MDEX 6.4.1
    Platform Services 6.1.3
    Tools and Frameworks 3.1.2
    After deploying the Discover Electronics reference application using Forge, I've restarted the server. After running two scripts for PlatformServices ( /usr/local/endeca/PlatformServices/6.1.3/tools/server/bin/startup.sh) and ToolsAnd Frameworks (/usr/local/endeca/ToolsAndFrameworks/3.1.2/server/bin/startup.sh), I cannot access EAC Admin Console from workbench. error message says: An error occurred while trying list applications.: Error while running a hibernate transaction: Failed to initialize SessionFactory for database 'eacstore'
    I even tried to run "eaccmd.sh list-apps" to display the application list from terminal. However, it was giving me the same error message. Here is the stack trace using --verbose option.
    at org.apache.derby.iapi.error.StandardException.newException(Unknown Source)
    at org.apache.derby.impl.store.raw.data.StoredPage.validateChecksum(Unknown Source)
    at org.apache.derby.impl.store.raw.data.StoredPage.initFromData(Unknown Source)
    at org.apache.derby.impl.store.raw.data.CachedPage.setIdentity(Unknown Source)
    at org.apache.derby.impl.services.cache.ConcurrentCache.find(Unknown Source)
    at org.apache.derby.impl.store.raw.data.FileContainer.getAnyPage(Unknown Source)
    at org.apache.derby.impl.store.raw.data.BaseContainer.getAnyPage(Unknown Source)
    at org.apache.derby.impl.store.raw.data.BaseContainerHandle.getAnyPage(Unknown Source)
    at org.apache.derby.impl.store.raw.data.PageBasicOperation.findpage(Unknown Source)
    at org.apache.derby.impl.store.raw.data.PageBasicOperation.needsRedo(Unknown Source)
    at org.apache.derby.impl.store.raw.log.FileLogger.redo(Unknown Source)
    at org.apache.derby.impl.store.raw.log.LogToFile.recover(Unknown Source)
    at org.apache.derby.impl.store.raw.RawStore.boot(Unknown Source)
    at org.apache.derby.impl.services.monitor.BaseMonitor.boot(Unknown Source)
    at org.apache.derby.impl.services.monitor.TopService.bootModule(Unknown Source)
    at org.apache.derby.impl.services.monitor.BaseMonitor.startModule(Unknown Source)
    at org.apache.derby.iapi.services.monitor.Monitor.bootServiceModule(Unknown Source)
    at org.apache.derby.impl.store.access.RAMAccessManager.boot(Unknown Source)
    at org.apache.derby.impl.services.monitor.BaseMonitor.boot(Unknown Source)
    at org.apache.derby.impl.services.monitor.TopService.bootModule(Unknown Source)
    at org.apache.derby.impl.services.monitor.BaseMonitor.startModule(Unknown Source)
    at org.apache.derby.iapi.services.monitor.Monitor.bootServiceModule(Unknown Source)
    at org.apache.derby.impl.db.BasicDatabase.bootStore(Unknown Source)
    at org.apache.derby.impl.db.BasicDatabase.boot(Unknown Source)
    at org.apache.derby.impl.services.monitor.BaseMonitor.boot(Unknown Source)
    at org.apache.derby.impl.services.monitor.TopService.bootModule(Unknown Source)
    at org.apache.derby.impl.services.monitor.BaseMonitor.bootService(Unknown Source)
    at org.apache.derby.impl.services.monitor.BaseMonitor.startProviderService(Unknown Source)
    at org.apache.derby.impl.services.monitor.BaseMonitor.findProviderAndStartService(Unknown Source)
    at org.apache.derby.impl.services.monitor.BaseMonitor.startPersistentService(Unknown Source)
    at org.apache.derby.iapi.services.monitor.Monitor.startPersistentService(Unknown Source)
    ... 51 more
    An error occurred while trying list applications.: Error while running a hibernate transaction: Failed to initialize SessionFactory for database 'eacstore'
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at java.lang.Class.newInstance0(Class.java:355)
    at java.lang.Class.newInstance(Class.java:308)
    at org.apache.axis.encoding.ser.BeanDeserializer.<init>(BeanDeserializer.java:104)
    at org.apache.axis.encoding.ser.BeanDeserializer.<init>(BeanDeserializer.java:90)
    at com.endeca.eac.client.EACFault.getDeserializer(EACFault.java:75)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.axis.encoding.ser.BaseDeserializerFactory.getSpecialized(BaseDeserializerFactory.java:154)
    at org.apache.axis.encoding.ser.BaseDeserializerFactory.getDeserializerAs(BaseDeserializerFactory.java:84)
    at org.apache.axis.encoding.DeserializationContext.getDeserializer(DeserializationContext.java:464)
    at org.apache.axis.encoding.DeserializationContext.getDeserializerForType(DeserializationContext.java:547)
    at org.apache.axis.message.SOAPFaultDetailsBuilder.onStartChild(SOAPFaultDetailsBuilder.java:157)
    at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java:1035)
    at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
    at org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(Unknown Source)
    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
    at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
    at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
    at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
    at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
    at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
    at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
    at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
    at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
    at org.apache.axis.client.Call.invoke(Call.java:2767)
    at org.apache.axis.client.Call.invoke(Call.java:2443)
    at org.apache.axis.client.Call.invoke(Call.java:2366)
    at org.apache.axis.client.Call.invoke(Call.java:1812)
    at com.endeca.eac.client.ProvisioningPortSOAPBindingStub.listApplicationIDs(ProvisioningPortSOAPBindingStub.java:981)
    at com.endeca.esfcmd.commands.ProvisioningCommandHandler.listApps(ProvisioningCommandHandler.java:367)
    at com.endeca.esfcmd.commands.ProvisioningCommandHandler.execute(ProvisioningCommandHandler.java:131)
    at com.endeca.esfcmd.Main.main(Main.java:137)
    An error occurred while trying list applications.: Error while running a hibernate transaction: Failed to initialize SessionFactory for database 'eacstore'
    Could anyone advise me what I'm missing here?
    Thank you in advance.
    Yong

    Hi,
    Were you able to initialize the application using initialize_services.sh?
    Check Discover.0.0.log in <apps>/Discover/logs/ directory and check for more detail exception stack trace.
    HTH
    Pravin

  • Opmn.exe the application failed to initialize properly

    hi,
    i have installed SOA for OBIEE on windows 2008 server. i am able to start the SOA without any issues but when i am logging off my windows machine i am getting this error and the SOA suite is getting shutdown
    opmn.exe the application failed to initialize properly (0xc0000142). click ok to terminate the application
    can anyone help me in this regard
    regards,
    chandrasekhar.

    plese find the opmn.log file
    11/05/25 10:46:35 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (21:0)
    11/05/25 10:46:35 [pm-process] Starting Process: default_group~home~default_group~1 (22:0)
    11/05/25 10:46:38 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (21:4088)
    11/05/25 10:46:47 [pm-process] Process Alive: default_group~home~default_group~1 (22:7324)
    11/05/25 10:46:47 [pm-requests] Request 5 Completed. Command: /start
    11/05/25 10:52:23 [ons-internal] ONS server initiated
    11/05/25 10:52:23 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
    11/05/25 10:52:23 [pm-internal] OPMN server ready. Request handling enabled.
    11/05/25 10:52:23 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (23:0)
    11/05/25 10:52:25 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (23:9100)
    11/05/25 10:52:29 [pm-requests] Request 5 Started. Command: /start
    11/05/25 10:52:29 [pm-process] Starting Process: default_group~home~default_group~1 (24:0)
    11/05/25 10:52:42 [pm-process] Process Alive: default_group~home~default_group~1 (24:3904)
    11/05/25 10:52:42 [pm-requests] Request 5 Completed. Command: /start
    11/05/25 10:53:56 [ons-internal] ONS server initiated
    11/05/25 10:53:56 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
    11/05/25 10:53:56 [pm-internal] OPMN server ready. Request handling enabled.
    11/05/25 10:53:56 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (25:0)
    11/05/25 10:53:58 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (25:8400)
    11/05/25 10:54:02 [pm-requests] Request 5 Started. Command: /start
    11/05/25 10:54:02 [pm-process] Starting Process: default_group~home~default_group~1 (26:0)
    11/05/25 10:54:14 [pm-process] Process Alive: default_group~home~default_group~1 (26:6552)
    11/05/25 10:54:14 [pm-requests] Request 5 Completed. Command: /start
    11/05/25 12:56:51 [pm-requests] Request 2e Started. Command: /stop
    11/05/25 12:56:51 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (25:8400)
    11/05/25 12:56:51 [pm-process] Stopping Process: default_group~home~default_group~1 (26:6552)
    11/05/25 12:57:17 [pm-process] Process Stopped: HTTP_Server~HTTP_Server~HTTP_Server~1 (25:8400)
    11/05/25 12:58:53 [pm-requests] Request 2e Completed. Command: /stop
    11/05/25 12:58:53 [pm-process] Stopping Process: default_group~home~default_group~1 (26:6552)
    11/05/25 12:58:53 [libopmnoc4j] Forcefully Terminating Process: default_group~home~default_group~1 (26:6552)
    11/05/25 12:58:55 [pm-process] Process Stopped: default_group~home~default_group~1 (26:6552)
    11/05/25 12:58:58 [pm-requests] Request a2 Started. Command: /stop
    11/05/25 12:58:58 [pm-requests] Request a2 Completed. Command: /stop
    11/05/25 12:58:58 [pm-internal] OPMN server stopped. Request handling disabled.
    11/05/25 12:58:58 [pm-requests] Request a3 Started. Command: /shutdown
    11/05/25 12:58:58 [pm-requests] Request a3 Completed. Command: /shutdown
    11/05/25 12:58:58 [pm-scheduler] Pm/Ons confirm notification timeout
    11/05/25 12:58:59 [internal] Logging disabled
    11/05/25 12:59:45 [ons-internal] ONS server initiated
    11/05/25 12:59:45 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
    11/05/25 12:59:45 [pm-internal] OPMN server ready. Request handling enabled.
    11/05/25 12:59:51 [pm-requests] Request 5 Started. Command: /start
    11/05/25 12:59:51 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (27:0)
    11/05/25 12:59:51 [pm-process] Starting Process: default_group~home~default_group~1 (28:0)
    11/05/25 12:59:55 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (27:8364)
    11/05/25 13:00:04 [pm-process] Process Alive: default_group~home~default_group~1 (28:3396)
    11/05/25 13:00:04 [pm-requests] Request 5 Completed. Command: /start
    11/05/25 13:01:16 [ons-internal] ONS server initiated
    11/05/25 13:01:16 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
    11/05/25 13:01:16 [pm-internal] OPMN server ready. Request handling enabled.
    11/05/25 13:01:16 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (29:0)
    11/05/25 13:01:19 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (29:3740)
    11/05/25 13:01:22 [pm-requests] Request 5 Started. Command: /start
    11/05/25 13:01:22 [pm-process] Starting Process: default_group~home~default_group~1 (30:0)
    11/05/25 13:01:32 [pm-process] Process Alive: default_group~home~default_group~1 (30:8892)
    11/05/25 13:01:32 [pm-requests] Request 5 Completed. Command: /start
    11/05/25 16:11:38 [pm-requests] Request 3c Started. Command: /start
    11/05/25 16:11:38 [pm-requests] Request 3c Completed. Command: /start
    11/05/25 16:17:52 [ons-internal] ONS server initiated
    11/05/25 16:17:52 [pm-internal] PM state directory exists: C:\product\10.1.3.1\OracleAS_1\opmn\logs\states
    11/05/25 16:17:52 [pm-internal] OPMN server ready. Request handling enabled.
    11/05/25 16:17:53 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (31:0)
    11/05/25 16:17:55 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (31:5032)
    11/05/25 16:17:59 [pm-requests] Request 5 Started. Command: /start
    11/05/25 16:17:59 [pm-process] Starting Process: default_group~home~default_group~1 (32:0)
    11/05/25 16:18:10 [pm-process] Process Alive: default_group~home~default_group~1 (32:2424)
    11/05/25 16:18:10 [pm-requests] Request 5 Completed. Command: /start
    i have some files in the c:\windows\temp folder

  • Configuration system failed to initialize

    Getting error when I try to install an excel addin that I have published.
    Error message is  "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
    To publish the addin I  use the publish option on the build menu of VS2013.
    Specify the location to publish this application:  F:\publish   where F: is a USB drive.
    What is the default installation path on end user computers:  From a CD-ROM or DVD-ROM
    Then I take the USB drive to another PC, double click on setup.exe in the USB drive and get the "configuration system failed to initialize" error.  I copy the entire publish directory to the C: drive of the target system and get the same error.
    What am I doing wrong? 
    thanks,

    Hi Steve,
    >>Error message is  "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
    For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
    #Customization could not be loaded because the application domain could not be created.
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
    If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly.  If it could not install correctly, I assume that there might be something wrong when you
    publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • The error "configuration system failed to initialize" occurred

    Hi
    When I converted and built the solution file that was developed by Visual Studio .net 2003 using Visual Studio 2005, the application program was abnormal-ended at the following step:
    m_TCPChannel = New System.Runtime.Remoting.Channels.Tcp.TcpChannel(tcp_properties, Nothing, Nothing)
    The error message was "configration system failed to initialize".  The Exception.ToString said that the root <configuration> tag was not included in the configuration file. Therefore, I changed <configopt> tag to <configuration>
    tag in the app.config file of the target project, and then executed again. Next time, the application program was abnormal-ended by the unrecognized section <xs:schema>. Therefore, I changed the app.config file to the simple one (only <configuration>
    and </configuration> tags), and then executed again. The error didn't occur. I guess that it's caused by configuration settings. Please advise.
    app.config file:
    <?xml version="1.0" standalone="yes"?>
    <configopt>
    <xs:schema id="configopt" xmlns="" xmlns:xs="URLリンク" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
    <xs:element name="configopt" msdata:IsDataSet="true" msdata:Locale="en-AU">
    <xs:complexType>
    <xs:choice maxOccurs="unbounded">
    <xs:element name="Environment">
    <xs:complexType>
    <xs:sequence>
    <xs:element name="Name" type="xs:string" minOccurs="0" />
    <xs:element name="System" type="xs:string" minOccurs="0" />
    <xs:element name="DataLibrary" type="xs:string" minOccurs="0" />
    <xs:element name="Default" type="xs:boolean" minOccurs="0" />
    <xs:element name="UserId" type="xs:string" minOccurs="0" />
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    </xs:choice>
    </xs:complexType>
    </xs:element>
    </xs:schema>
    <Environment>
    <Name>Test</Name>
    <System>XXXX.COM</System>
    <DataLibrary>XXXTEST</DataLibrary>
    <Default>false</Default>
    <UserId></UserId>
    </Environment>
    <Environment>
    <Name>Production</Name>
    <System>XXXXX.COM</System>
    <DataLibrary>XXXPROD</DataLibrary>
    <Default>true</Default>
    <UserId />
    </Environment>
    </configopt>

    Hi,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Since your issue occurred on the converted project from VS .net 2003 to VS2005, and VS2005 is out of
    our mainstream support , I suggest that you should consult on some development forums to check whether they will to provide some suggestions or
    submit a support ticket to below site,
    https://support.microsoft.com/oas/default.aspx?Gprid=1117&st=1&wfxredirect=1&sd=gn&wfxredirect=1
    Thank you for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • "Configuration system failed to initialize" when trying to connect FM12 to Sharepoint

    Adding a connection to Sharepoint using the FM12 CMS Connection Manager is failing with the error "Configuration system failed to initialize".  I can access all the sites and libraries in Sharepoint perfectly from IE on the same PC, but no matter what I try in the FM12 Connection Manager I get the above mentioned error.  The PC (which is actually a VM) is running Windows Server  2008 R2 (x64 with heaps of RAM and HDD free) with all updates applied.  FM12 is installed as part of Technical Comms Suite 5 subscription.
    Does anyone have any ideas what may be causing this (or what it even means) and how I can fix it?

    Hi Steve,
    >>Error message is  "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
    For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
    #Customization could not be loaded because the application domain could not be created.
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
    If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly.  If it could not install correctly, I assume that there might be something wrong when you
    publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • CS5.5 Design Premium: installer failed to initialize

    Ok, I'm having this problem.  This started because I had to perform a system restore.  I ended having to go back so far with the system restore that all of my Adobe Products(among others) no longer appeared to be installed. 
    So I downloaded Adobe CS5.5 Design premium from a link mentioned elsewhere in the discussions.  Everything extracts fine, but when I execute the installer it always prompts "installer failed to initialize".  I have downloaded the Adobe support advisor.  It shows multiple:
    cpsid_82829s1: "A restart is pending," bootstrapper error has occurred.
    Click here for details and corrective actions related to this issue.
    I have clicked the links(http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-bootstrapper-cs5.html)  below and followed the instructions.  There is no "InProgress" Entry in the registry in the locations provided.   I have also ran the "Adobe CS5 Cleaner Tool " Multiple times and have removed ALL.   I have deleted every directory on this computer that says Adobe.   
    This is a clients computer and we REALLY don't want to wipe and reload(Money/time and all that).  Can anyone help me with this error?

    System restore is a first resort for most people when there is a problem in Windows.  Obviously it wasn't a hit in this situation.  I know a wipe and reload would fix it.  If you read my post you'd see I'm trying to avoid that.  If you have any information that can help me there I would love to know it. 

  • Failed to initialize the application 'soa-infra' for SOA suite 11g

    Hello experts!
    Having followed the steps in http://www.packtpub.com/article/installation-configuration-oracle-soa-suite-11g-1,
    upon starting the cmd scripts, I received among others the following error message:
    <BEA-149205> <Failed to initialize the application 'soa-infra' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
    java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;
         at oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener.preStart(JpsApplicationLifecycleListener.java:76)
         at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:277)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
         at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:57)
         at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:279)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    java.lang.NoSuchMethodError:
    I have searched but only to find a change permissions hint which did not work for me. SOA 11g - SOA-INFRA is not starting
    Any helping hand available?
    Thank you very much in advance!
    The fuller log follows:
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <WebLogicServer> <Hera> <> <main> <> <> <> <1270482051581> <BEA-000214> <WebLogic Server "soa_server1" version:
    WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Notice> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170019> <The server log file C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\logs\soa_server1.log is opened. All server side log events will be written to this file.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Diagnostics> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051691> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051753> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2">
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "http" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "https" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "admin" is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <RJVM> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051862> <BEA-000570> <Network Configuration for Channel "soa_server1"
    Listen Address          :8001
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-002609> <Channel Service initialized.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
    >
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051941> <BEA-000436> <Allocating 5 reader threads.>
    ####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051942> <BEA-000446> <Native IO Enabled.>
    ####<5 Απρ 2010 6:40:52 μμ EEST> <Info> <IIOP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482052098> <BEA-002014> <IIOP subsystem enabled.>
    ####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053408> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
    ####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053704> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053751> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_VFJSY8asFO+H8NVntiPFSkiIk0o=>
    ####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053923> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053985> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054453> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054469> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server soa_server1 for security realm myrealm.>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Notice> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-002622> <The protocol "[snmp, https, t3, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s, iiops]" is now configured.>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <XML> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-130036> <Initializing XMLRegistry.>
    ####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <messaging.interception> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054765> <BEA-400000> <Initializing message interception service>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055015> <BEA-280050> <Persistent store "_WLS_soa_server1" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\default" writePolicy="Direct-Write" blockSize=512 directIO=true driver="wlfileio2">
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001135> <Initializing the JDBC service.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001137> <Initialization complete.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001138> <Resuming the JDBC service.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001140> <Resume complete.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055264> <BEA-190000> <Initializing J2EE Connector Service>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055280> <BEA-190001> <J2EE Connector Service initialized successfully>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055327> <BEA-040305> <JMS service is initialized and in standby mode.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055342> <BEA-040090> <Deployed 8 default connection factories.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040306> <JMS service is active now.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055389> <BEA-101128> <Initializing HTTP services.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101135> <soa_server1 is the default Web server.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101052> <[HttpServer (defaultWebserver) name: soa_server1] Initialized>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101129> <Initializing the Web application container.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: Logging service enabled.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Task Manager instantiated!>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC security service instantiated!>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Transaction service instantiated!>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220031> <The server does not support reliable SOAP messaging.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220027> <Web Service reliable agents are started on the server.>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMX> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055467> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://192.168.1.2:8001/jndi/weblogic.management.mbeanservers.runtime .>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055483> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055514> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
    ####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055530> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
    ####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482056684> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
    ####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] E

    Thank you for your reply!
    The tutorial emphasizes that I need jdk 1.6 update 11 in order to setup.
    The newer release of wl server comes with jsk 1.6 update 14.
    When I tried to run:
    setup -jreLoc C:\Oracle\Middleware\home_11gR1\jdk160_14
    no setup screen appeared.
    Next, I setup stand alone jdk 1.6 update 11 and add it to path,
    but setup -jreLoc C:\Program Files\Java\jdk1.6.0_11 failed too, since no setup screen appeared
    So I uninstalled version 10.3.2, installed 10.3.1 to follow exactly the tutorial specs.
    Does one has to pay oracle consulting, in order to have an installation of soa suite up and running for development?
    Edited by: Nick Aiva on Apr 6, 2010 11:27 AM

Maybe you are looking for

  • Invoice Payment Block (RBKP-ZLSPR / BSEG-ZLSPR) Update

    Hi ABAP Gurus, Good day. Basically, I need to update Invoice Payment Block from "W" to "R".  I have tried BAPI_INCOMINGINVOICE_CHANGE but could not change the Payment from "W" to "R".  I believe that this is part of the said FM's restriction.  As per

  • How can I reset the settings of one Yosemite Account?

    Hello. How can I reset the dock, preferences, etc. of only ONE Yosemite Account instead of the whole computer. Yes, I know that I can just make a new account, but I don't really want to do that. Please help.

  • JAVA_HOME running tomcat

    hi! i recently downloaded the Java Web Services Developer pack. the installation went fine, howeve when i try to run tomcat it gives me Bad command or file name The JAVA_HOME environment variable is not defined This environment variable is needed to

  • Please,Please help!  Safari keeps crashing

    Here is the 1st crash. Process: Safari [510] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 3.2.3 (5525.28.3) Build Info: WebBrowser-55252803~5 Code Type: PPC (Native) Parent Process: launchd [113] Interval

  • Processing Routines in t.code V/40

    Hi gurus, Good day! Please kindly assist to advice how does Processing Routines work. Our system currently has 2 processing routines maintained (Processing 1 and Processing 2) to one Output Type. Please advice how will the system go to Processing 2 a