26-suspend2 error: "Some modules failed to unload: nvidia"

I've been trying to install the suspend2 kernel to allow my machine to hibernate, but I can't get it to work from within X (though it seems to work fine in run level 3). When I try, I get:
$ sudo hibernate
Password:
:: Saving ALSA Levels [DONE]
Some modules failed to unload: nvidia
hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
:: Restoring ALSA Levels [DONE]
Here is my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Jun 13 18:39:30 PDT 2007
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "dbe"
Load "record"
Load "extmod"
Load "freetype"
Load "type1"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 340 270 # mm
### Comment all HorizSync and VertRefresh values to use DDC:
Identifier "Monitor0"
VendorName "MAG"
ModelName "LT716s"
HorizSync 31.0 - 81.0
VertRefresh 60.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "NvAGP" "1"
#ProcSetting extra_pages_allowance 0
Identifier "Card0"
Driver "nvidia"
#Driver "nvidia-suspend2"
VendorName "nVidia Corporation"
BoardName "GeForce 7300 LE"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "true"
Option "DisableGLXRootClipping" "true"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
hibernate.conf:
# hibernate.conf is split into separate configuration files.
# Each file is tried in the order below, until an available suspend
# method is found.
# Options specific to a particular suspend method should be placed in the
# appropriate configuration file (suspend2.conf, ususpend.conf, disk.conf
# or ram.conf).
# Options common to all suspend methods should be placed in common.conf.
# See hibernate.conf(5) for help on the configuration items.
TryMethod suspend2.conf
#TryMethod disk.conf
#TryMethod ram.conf
common.conf:
# Configuration options common for suspending to disk or RAM.
# Options are not case sensitive.
# See hibernate.conf(5) for help on the configuration items.
### Some global settings
Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 1
# LogTimestamp yes
# AlwaysForce yes
# AlwaysKill yes
# HibernateVT 15
Distribution arch (or debian/fedora/gentoo/mandrake/redhat/slackware/suse)
# XDisplay :0
### Scriptlets
### Scriptlets provide support for doing all sorts of things before and after
### suspending. The defaults settings here should work for most people, but
### you may wish to edit these to taste. Consult "hibernate -h" for help on
### the configuration settings.
### bootsplash
## If you use bootsplash, also enabling SwitchToTextMode is recommended if
## you use X, otherwise you may end up with a garbled X display.
# Bootsplash on
# BootsplashConfig /etc/bootsplash/default/config/bootsplash-1024x768.cfg
### clock
SaveClock restore-only
### devices
# IncompatibleDevices /dev/dsp /dev/video*
### diskcache
# DisableWriteCacheOn /dev/hda
### fbsplash (enable SwitchToTextMode if you use this)
# FBSplash on
# FBSplashTheme suspend2
### filesystems
# Unmount /nfsshare /windows /mnt/sambaserver
# UnmountFSTypes smbfs nfs
# UnmountGraceTime 1
# Mount /windows
### grub
# ChangeGrubMenu yes
# GrubMenuFile /boot/grub/menu.lst
# AlternateGrubMenuFile /boot/grub/menu-suspended.lst
# BackupGrubMenuFile /boot/grub/menu.lst.hibernate.bak
# see http://bugs.debian.org/317479
# RemountXFSBoot yes
### hardware_tweaks
# IbmAcpi yes
# Runi915resolution yes
# FullSpeedCPU yes
### lilo
# EnsureLILOResumes yes
### lock (generally you only want one of the following options)
# LockConsoleAs root
# LockXScreenSaver yes
# LockGnomeScreenSaver yes
# LockKDE yes
# LockXLock yes
# LockXAutoLock yes
### misclaunch
# OnSuspend 20 echo "Good night!"
# OnResume 20 echo "Good morning!"
### modules
# UnloadModules snd_via82cxxx usb-ohci
# UnloadAllModules yes
UnloadBlacklistedModules yes
LoadModules auto
# LoadModulesFromFile /etc/modules
### modules-gentoo
# GentooModulesAutoload yes
### network
# DownInterfaces eth0
# UpInterfaces auto
### pause_audio
# MuteAudio yes
# PauseAudio yes
### pcmcia
# EjectCards yes
### programs
# IncompatiblePrograms xmms
### services
# RestartServices laptop_mode
RestartServices alsa
# StopServices alsasound
# StartServices aumix
### vbetool
# EnableVbetool yes
# RestoreVbeStateFrom /var/lib/vbetool/vbestate
# VbetoolPost yes
# RestoreVCSAData yes
### xhacks
SwitchToTextMode yes
# UseDummyXServer yes
# DummyXServerConfig xorg-dummy.conf
### xstatus
## This can be set to gnome, kde or x:
# XStatus gnome
# XmessageDisable yes
# XSuspendText Preparing to suspend...
# XResumeText Resuming from suspend...
## When using XStatus x, and you have xosd installed:
# XosdSettings --font '-misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-*' --colour=Green --shadow 1 --pos bottom --align center --offset 50

So does this mean that ususpend with hibernate-script is somehow broken and that pm-utils must be used?
UPDATE: I just tried it. pm-utils suspends without complaint, and was easy to set up. I still have problems
though, and will post them separately, if I don't find a solution on the wiki.
Last edited by adrian.ratnapala (2009-08-01 16:53:06)

Similar Messages

Error 1904.module failed to register \importent.dll files HRESULT -10737407

Hi,
I'm trying to install BOE on the E drive, but i'm getting this error "error 1904.module failed to register C:
Program Files(X86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791".
1.My question is eventhough i'm installin on E, by default i think its trying to load some folders/files on C drive. Is this error because of some permission/rights on C drive??
2. What does this error mean?? Can we ignore this error- will it have some problems in future??
Could someone please help me on this....
Thanks,
Rajini
Edited by: Rajini V on Nov 30, 2009 8:22 AM

Thanks Seb.
I have the administrator rights.
I have now cleaned up all the instances and registry entries for the same and started a fresh installation on E drive.
But the 'Importent6.dll' file is not getting registered.
I'm getting the error :
u201Cerror 1904.module failed to register E:
Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791u201D
Why do we get this error?? How can I overcome this??
Regards,
Rajini

AE CC Render error output module failed

Hi, I tried my best to find this answer on the forums but couldn't find anything current.
I have isolated two issues in AE CC where I can duplicate a failed render with this message:
After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
This happens when opening an AE CS6 project and trying to render a simple comp with only one text layer and a moving mask. It also just happened after my first round trip test with Cinema 4D. I could RAM preview the c4d layer but the output to Quicktime h.264 failed.
I have even tried a full reinstall of AE CC. I have the basic FxFactory Pro plugins and MagicBullet Looks installed, but neither are being used since this is a single 1280x720 comp with a single C4D layer. Plus like I said it failed with the same error in past CS6 files.
I don't know how to force disable a plugin to test that, but I can't see how an unused plugin could cause a render to fail like this.
I'm on a new (late 2012) 27" iMac
3.4 GHz Intel Core i7
8GB RAM
NVIDIA GeForce GTX 680MX with 2GB VRAM
OS X 10.8.4
AE CC 12.0.0.404
CUDA driver 5.0.59
Thanks for any suggestions!
Matt

Olaf, did you read my reply where I explained my solution? First you should try the steps outlined in the article Todd references:
http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime- errors-with-after-effects.html
There seems to be a good way to isolate if it's the same issue I had, though. Let me go into a bit of depth for you.
The trick was to launch the OS X app called Console, located in Applications > Utilities. It is a program that compiles and displays the system logs in real time. It's great to see the little things happening in the system that don't make it into the user interface. When I had my Console up and generated that same error you're having, I noticed this error in the log:
The key here is the Adobe QT32 Server, which is mentioned in the TCP part of the article I linked to above from Todd. In my case at least, what was happening was that a third party app called AirServer was talking to the system's QuickTime over the same TCP ports the QT32 Server engine was trying, and it resulted in Adobe QT32 Server crashing, and that alert being thrown up in AfterEffects.
If you're in the same boat, it means you have some sort of app or system extension that is also talking to QuickTime over TCP. That may not make any sense, but the easy thing to do is quit ALL third party apps, then quit AE, then restart AE.
In my situation if AE gave me the error and then I quit AirServer, the error still happened because Adobe QT32 had already crashed. You have to relaunch AE after closing the offending third party app.
To be sure you've quit all third party apps, open Activity Monitor (Applications > Utilities), chose "My Processes" from the dropdown menu, and scan through the list to make sure. You don't have to recognize all the processes there, but you should be able to recognize any third party ones you put there.
Hope that helps!
Matt

Error 1904 - Module failed to register

I have been getting an error whenever I try to install Crystal Reports 2008 that says the following:
Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportConvTool.dll failed to register. HRESULT -2147024769. Contact your support personnel.
I have upgraded to the latest version of .NET 4 and turned off all antivirus software (as well as attempted other remedies suggested in other posts). However, I continue to get this error during installation regardless of if I run my installer off the CD we purchased or the latest download.
If possible, please reply with a solution or possible cause.
Thank you

Hi All,
I´m with a same problem.
I installed the CR 2008 SP1 in my notebook and when the installation begins register the module ReportConvTool.dll the intallation does not continue and not display error message.
Someone know what's going on ?
Tks.

Error "Output module failed. The file may be damaged or corrupted (-1610153464)"

Hi all.
I using After Effect CS5.5, but i didn't render some projects. Error:
And
Render Best Setting AVI or Quicktime (with OpenGL or without OpenGL).
I try to unstall and reinstall AE, Quicktime but it don't success.
Note: Render with ffdshow is normal.
Some project don't appear error.

Code Packs:

Quicktime render errors-output module fails

Hi everyone,
I'm having more and more trouble lately rendering out a simple uncompressed (codec = none) 1280x720 or 1920 x 1080 Quicktime.
This used to be my standard output format, ready for further encoding.
But now almost every render to uncompressed Quicktime stops at a random moment and give me the "Output failed" error message.
What the heck changed when going from CS6 to CC ?????? Anyone experience anything similar?

We need a lot more information than you've given us to have any idea:
FAQ: What information should I provide when asking a question on this forum?

AE Render Error - Output Module Failed

Hi all,
I have a problem with AE CC.
AE lets me render out (export) one file then after I try to render any more, I get the below message.
To combat this, I reboot AE and it then will let me render out one file, but I have to constantly reboot it to export/render more.
I have creared new project files, emptied my cache, cleaned data base etc, but I still get this message.
The comp's I am rendering out are small - between 1 to 20 seconds a piece and for the most part are only text layers created in AE.
Is this a hardware issue? I have been using AE CC for a week now, it didn't happen for the first couple of days, now this seems to be the norm. I only have CC progrmas open when I work - AE, Premeire, Psd & Bridge. Even when I have only AE open, I get the same message after exporting one comp.
Any suggestions would be greatly appreciated.
Thanks guys!!!
Pat

I made a similar post a few days ago but it seems to only be affecting my QuickTime output.
I still have no resolve.
In my office currently there are 4 new machines all running CC. My machine is the only one having problems. The only difference between my machine and the rest is that I selected which adobe apps to download and install while the others installed all the apps.
I am busy doing that now.
The machines are all identical:
Adobe CC
Windows 8 Pro 64 Bit
Intel i7 - 3770k 3.5Ghz
16 Gig RAM
GeForce GTX 660
There are 6 hard drives on the system.
C drive is a solid state drive that i am also using as the cache drive for After Effects.
Sometimes I am able to render the QuickTime files on the 1st render, but after that, error message.
I tried uninstalling AE and reinstalling but that didnt work.
I tried various versions of QuickTime.
I tried all the suggestions in the link, and same as you, it 'fixed' it temporarily.
I will get back to you If I have figured something out.

Module Failed SCP dnld

Hi, I have a WS-SVC-IDSM-2 which is showing as PwrDown looking at the show power there is more than enough but there is an error message "Module Failed SCP dnld" does any body know why this is showing? it is something to do with the rom version.
Regards MJ

Sounds like IDSM2 rom issue, or switch IOS that does not recognise it. Sometime this is also happened to Firewall module (FWSM).
Do a 'show hw-module all fpd' and/or 'sh module'. Check the IDSM2 power status at the end of the line. Is the Status 'PwrDown'?
Check the IDSM-2 and switch version compatibility matrix. Issue 'sh version' on the switch, and check the IDSM-2 version (session into IDSM-2).
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/idsm/idsm_2/13074_04.htm#wp333372
HTH. Pls rate all useful post(s)
AK

Download! fails to refresh "some catalogs failed t...

Hi,
brand new e71, did a soft reset as I opened it to start from scratch and I have no items in Download!. Trying to refresh the catalog produces the following error: "Some catalogs failed to load. Try again later". This happens using my home wifi and web browsing works just fine so connection isn't the issue. I've only managed to find one post in the forum suggesting to quickly repeat the refresh and it'd work at the second attempt, but it produces no results for me, and I've tried several attempts through the day.
any suggestion much appreciated.
thanks

Now I have yes and no joy, which makes sense to me since this is not a carrier's service but just a data connection. Given that this was after a soft reset it's unlikely that something is conflicting with it either, so I'm really out of ideas. I found a link to the install zip file for Download! but surprise surprise it's not really made easy for phone installation and would require me to go through a pc. Hopefully someone will have a better idea.
thanks

Download! - Some catalogs failed to load

When I try to update the catalogs in the Download! application on my N95, I get the error 'Some catalogs failed to load'. Details of the error show '400: Bad Request'. All the icons that were there before have disappeared.
I have used this application many times without any problems in the past, but it just stopped working a few days ago. Anyone else having this problem? Is it a problem at the server end, or has my phone got corrupted somehow!?
Cheers
Download! v3.1.703.
V.11.0.026
17-04-07
RM-159
Nokia N95 (41.03)

I've had this a few times recently, it happens the first time I refresh after opening Downloads, so I refresh again straight away after, and it works again...
This is one to report back with I think - probably using the Online form via the Contact us link at the top of the page.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

"...an Output Module failed" error screen...

Greetings AE Peeps!!
Long time - no see - been stupid busy. My Studio has just ponied up and upgraded our 5 Edit Stations to AE CS5. I personally am a huge advocate of not upgrading software while in the middle of a project, but this was out of my control. I am having a lot of crashing (app just quits for no reason while scrubbing) and other weirdness...like today. I am rendering a 3 minute piece in ProRes 4:2:2 (1280x720p) to my RAID (no special plug-ins or anything) and I get the following error at the very end of every render:
After Effects Error: Rendering error while writing to file (insert my RAID path here). An output module failed. The file may be damaged or corrupted (-1610153464)
I have never in 11 years got a "failed Output Module error". Can anyone speak to this and tell me how to get rid of it short of reinstalling AE?
Grazie! Ciao!
Joey

First, make sure that you've installed the After Effects CS5 (10.0.1) update.
Regarding the output module failure: It may be that this is because you have an output module created in a previous version of After Effects that refers to a codec or set of settings that isn't working in After Effects CS5. The best thing to do is to remove the output modules from the render items and then rebuild them in After Effects CS5. That may sound tedious, but you only need to do it once, and then you can save output module templates that you know work with After Effects CS5.
As Mylenium suggested, there are some challenges associated with the fact that there is no 64-bit QuickTime, so we had to create our own 32-bit-to-64-bit QuickTime conversion layer (QT32 Server). QuickTime does work with After Effects CS5, but there are some hiccups in some cases on first use.
If this doesn't help, answer back and we'll help you through.
Oh, this might be useful, too:
http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html

After Effects Error: rendering error while writing to file...Output Module failed - 1610153646

Hi – I’m currently working with someone who is running After Effects 5.5v10.5.0.253 on a PC which is running Windows 7 Ultimate. The computer has just recently been built and the software is newly installed. (ie. a couple of weeks old, max). Up until now, we have been using After Effects with no real issues. But tonight, we started to see the following error message, when trying to render something out:
“After Effects Error: rendering error while writing to file xxxxx. Output Module failed, the file may be damaged or corrupted -1610153646” – displayed during render, which meant the render failed.”
We started to review forums to see if we could come up with a fix and tried a few of the more common suggested solutions, including:
Make sure there are no third-party plug-ins or Windows incompatible elements installed - as it’s a pretty new install, we haven’t added anything except out-of-the box elements.
Clear the render queue – did this, no change.
Reinstall Quicktime – did this, no change.
Reinstall Creative Suite – also no change.
Check the default program to open .mov files is Quicktime – Quicktime was already the default.
A bit more detail about the machine...
Ram is 32gb
GPU is GeForce GTX 660ti
250gb soild states
2tb raid drive
Any help would be much appreciated. This is now happening on all AE files, even files that worked fine earlier in the week. Other than the AE and QT reinstalls mentioned above, nothing new has been added to the machine this week. On a deadline – so a quick response would be amazing, right about now. Thanks.

Hi Mylenium- thx for the quick response. We have have tried a bunch of different settings. AVIs work and we can do image sequences too. The only major problem seems to be with Quicktime files. While I appreciate your suggetion to convert with AME - this is only a workaround. Was really hoping for a solution that will fix the problem in After Effects? Heard rumor from a few friends in the biz, that this is a major bug... if possible, some feedback from Adobe product devs or someone with a technical background would be great! Thx.

How to load different modules in moduleLoader - some with other without unload?

Ok so I've read a lot about modules and I decided to build a site where I have a button bar menu and a single moduleLoader, where all of my pages are separate modules. Some of the modules will be preloaded with moduleManager technique so they will be in memory and should pop up instantly and others should be unloaded since they will be used rarely. Imagine you have 50 pages, 45 of them use the same 3 modules and the rest 5 use 5 other modules.
So I need 2 things:
1) those 3 modules preloaded (loaded into memory) and then used - this is not a problem. In the change handler of the button bar I just set the url of the moduleLoader=""; and right after that line I put moduleLoader.url = "module1.swf" for example. This way the ready event fires everytime I change the selected button of the buttonBar and since the module is loaded into memory it changes immediately, which is great.
2) I need the rest 5 modules that are not preloaded, to be loaded by the moduleLoader and when the user clicks on another button, the module to be unloaded and the new module for the new selected button to be loaded on it's place. So here unloading of the old module and loading of the new one should happen with 1 user interaction - clicking a button. How do I do that?
I am asking this because I found out that there is some difference when the module has been preloaded or not which changes the way it unloads. Also in certain cases if a module has been unloaded once and loaded again it stops shooting the unload event by only changing the moduleLoader.url and then you have to specifically call moduleLoader.unloadModule() function to get it called.
And all of this brought me to the idea that maybe the only way to make this work for case 2 is having moduleLoader.unloadModule(); and on the next line after it moduleLoader.url = "newModuleUrlHere";
But then I bumped into a problem with flickering in my buttonBar selected button transition which I describe and give online example of here:
http://forums.adobe.com/thread/760347?tstart=0
So is there any technique of combining preloaded modules which should not be unloaded + the ones who need to be loaded and unloaded and all of this to be working with just one moduleLoader instance?
I really didn't expect to have so much trouble with modules... If no one can suggest me a working example I will post each case I described here to help me get resolution to this cause I can't get on with my project and it's very important.
Thanks in advance!

Hi thanks for the reply here too
I agree it totally makes sense if I do not unload modules to load them in the same application domain and not as a child. This way I wouldn't have to worry about the singletons I could have forgotten to initialize in the main application If my logic is correct. But still is it wrong to leave them in a child ApplicationDomain since I will still have modules I will need to unload and I would still have to be careful about the singleton managers?
Note: have in mind I am trying to separate the module's from the main application, so the application won't use any classes defined in the modules since it won't be aware of what's in what module.
Yes, I do have a buttonBar buttons which map to module urls.
Ok I will try to setup my questions in a few very simple example applications, it would be easier for you to understand what's confusing me.
http://filip.nedyalkov.net/moduleLoaderTesting2/ - view source enabled - look at testing3.mxml
In the button bar change handler I have:
moduleURL = buttonBar.
selectedItem.url;moduleLoader.url = moduleURL;
and I listen to the moduleLoader unload event.
On the Unload Current Module Button I have: moduleLoader.unloadModule();
Ok what is confusing me is this: When I start switching between module1 and module2 do they automatically get unloaded because I recall reading that changing the moduleLoader.url property doesn't unload the module just releases it? Also I'm getting the unload event shoot very strange because if I am on module1 and then click on module2 it doesn't shoot that module1 was unloaded, it doesn't do anything. As soon as I click back on module1 then it shoot unloaded (you can see that in my example in the text area).
Another strange thing is that while doing this, everytime you click on module1 or module2 they get transferred over the network I can see that in mozilla firebug. Now if I am on module1 and click the Unload Current Module button the module really gets unloaded and then the unload event is correct and shoot when it's supposed to shoot. Now if you click on module2 and then come back to module1 it will get loaded again, but now it will be put in memory, it won't shoot unload event any more and it won't get transferred over the network when I switch the modules? Why is that ? All I did was unloading the module once and it changes everything.
So I hope you undertstand this cause I have no idea is this supposed to work this way? Would you be so kind to explain me this behaviour ?
Thanks!

Adobe Print form error: Initialization of the font server module failed.

Hi all,
When trying to open a PDF preview the error below is displayed:
"Initialization of the font server module failed."
The problem occurs with SAP GUI 7.10 patch 15 and Adobe Reader 9
With SAP GUI 7.10 patch 12 and 13 with Adobe Reader 9 the problem do not happen.
Has anybody faced this kind of problem? Is it a SAP GUI patch release issue?
Any help is welcome.
Kind regards,
Thiago Viaro

Hi Thiago,
We had exactly the same problem, but also with sp 12 and 13 for sapgui 710.
After applying ECL 6.0 Patch 4, the problem was solved.
Please have a look at sap note 1308147 and 1356854
Cheers,
Peter Albrecht

Rendering error whilst writing to file /filename etc./ An output module failed

I'm trying to render my composition in the latest AE CC 2014. I get the following error with all composition sizes and with different codecs: Rendering error whilst writing to file /filename etc./ An output module failed. The file may be damaged or corrupted (-1610153464). Can anyone help me sort this problem?

AE build number? Codec used? System OS?

26-suspend2 error: "Some modules failed to unload: nvidia"

Similar Messages

Maybe you are looking for