2600n doesn't pick up paper

Paper is not picked up from tray 2

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

L7680 All-in-one, won't pick up paper and print when sending MS word Document to printer

This printer has worked great for over 2 years. If I do a print test page it works fine. It prints out a fax confirmation page fine. When I send a document from MS word to printer I can hear it trying but it won't pick up paper. Says empty, add paper yet there is paper in bed. I have done all the tests suggested by HP. partial reset, tried reloading software, cleaning, adjusting, etc. Any Ideas would be appreciated

Hi,
From your post, you indicated "cleaning"... have you cleaned the rollers as described in step 4 of this document?
Printer doesn't pick up paper
Paper fiber "build up" occurs on older printers and rollers occasionally need cleaned.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

HP 2600N Not picking up paper

Hi, i have just serviced a HP 2600N as the colours were fading on prints. I took the printer apart and cleaned the mirrors and plastic lenses and is something i have done on a few of these printers now. One printer refuses to pick up paper however, and the cause appears to be a solenoid which is activated to allow the pickup roller to rotate. The solenoid is located behind the right hand side cover (as looking from the front of the printer) and is covered in blue insulation on all 3 printers i have serviced. Does anyone know if this part can be replaced and if so where from?
Thanks,
Dave

Hi @bchar ,
I see that you are having issues with the paper not feeding. I will certainly do my best to help you.
You can try and clean the pick up roller, it is also a replaceable part. I have provided a document with the steps for doing this in Solution three: Clean the pickup roller. Printer Does Not Pick Up or Feed Paper.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool?

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool? Help!

If the scan is in B&W, then play with the Threshold setting here
If it's in Color, then you will have to open the scan in a Raster editing software (like Photoshop) and play with the Brightness/Contrast settings to make the lines bolder.

File(FTP) Adapter doesn't pick any file from FTP server

Hi All,
This is a strange problem. I am trying to pick all the file from a FTP server using File Name: . . But the file adapter doesn't pick any file from the directory. When I change it to a specific file name eg. ABC.txt then it picks up the file ABC.txt only.
My requirement is to pick up all files in the directory and I just do not seem to understand what is wrong. I have used this wildcard option several times earlier and it always worked fine. But in this case, this does not work.
I changed the FTP server to point to an internal FTP server and it works fine.
I have checked all my parameters and everything looks okay. Like I mentioned earlier, if you specify exact file name, it picks up the file.
Any guess as to what is going on here?

Transport Protocol: FTP
Message Protocol: File
source directory: /test or test ( either one works)
file name: * or . or *.txt nothing works
server: ftp server name
port: 21
data connection: passive
user: ******
pass: ******
connect mode: permanently
transfer mode: text
QOS: exactly once
poll: 10 secs
processing mode: archive ( changed to test and delete as well, but made no difference.)
archive dir: dir path
file type: text
adapter specific attributes:
checked: set adapter specific attributes
and file name.
status: active.

I have 2 Apple ID's. I bought all my music on first one. Now, update/sync doesn't pick up musiuc bc using a new Apple ID.... can i merge them onto my iPhone?

I have 2 Apple ID's (the old one and my newer one - attached to a new email address).
I bought all my music on first one.
Update/sync doesn't pick up music bc using a new Apple ID.... can I merge them onto my iPhone?

No.
Content bought using one Apple ID cannot be merged or transferred to another Apple ID.
All content is forever tied to the Apple ID used to obtain them.

Hp 7500 all in one - not picking up paper

I have cleaned the paper rollers and it still won't feed paper through

Hello meme4_2
Thank you for the clarification. Are you having problems with the Automatic Document Feeder (ADF) or the regular tray?
For the ADF I would suggest trying the ADF Does not Pick up Paper article.
For the regular paper trays I would suggest trying the Out of Paper Error article. While you may not be getting that error the troubleshooting in that article may help resolve your issue.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP PSC 1610 All-In-One doesn't see that paper is loaded

HP PSC 1610 All-In-One doesn't see that paper is loaded and keeps asking me to load paper and press OK. I have done that per manual with no success. What's going on?
I am using an Intel MacBook running SnowLeopard

OK, I think this was among a series of "recalled" (years ago) printers where the feed rollers would become coated with a very slick substance that was outgassing from the rubber. There was a cleaning kit made for this but I am not sure it is still available. Instructions for it are here.
It the absence of the kit, you can clean the rollers manually by removing the rear door and scrubbing the three rollers with Scotchbrite. Red was used in the kit, but green may be aggressive enough to do the job. You may have to fiddle with the printer to clean the entire circumference of the three rollers. Once you do this, you will be good to go for years to come!
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP P1606 not picking up paper

I work at a small library. We have two HP P1606dn printers that were purchased to print labels for our books and materials but neither will pick up anything from the pickup trays. At first they both everything but over time first one quit picking up labels, followed soon after by its refusal to pick up paper and then eventually the other joined suit. I did manage to coax one of them back into printing paper but have had no luck with the other. What fixes can anyone recommend? Is the "pick up roller" an easy part to change and is that even the part that is failing?
Brenda Char
Systems Administrator
Library Activities Branch
Sgt Yano Library
TEL – [Personal Information Removed]
EMAIL – [Personal Information Removed]

Hi @bchar ,
I see that you are having issues with the paper not feeding. I will certainly do my best to help you.
You can try and clean the pick up roller, it is also a replaceable part. I have provided a document with the steps for doing this in Solution three: Clean the pickup roller. Printer Does Not Pick Up or Feed Paper.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

When I plug my iPad into my laptop it doesn't pick it up on iTunes?

When I plug my iPad into my laptop it doesn't pick it up on iTunes?

You did not state what OS you are running ... so for Windows
iOS: Device not recognized in iTunes for Windows - Support - Apple
For Mac OS X
iOS: Device not recognized in iTunes for Mac OS X - Support - Apple
Only for Mac OSX 10.6
Mac OS X v10.6: iOS device not recognized in iTunes after restart

Change Account Workflow in CUP - Doesn't pick up existing values for an Acc

Hi,
When using the change account option available in the CUP(5.3 SP 7), I expected the system to populate the user details as they exist in the provisioning system once I enter the account details that need a change. We have the 'Search' and 'User Details' Data source configured to the same SAP R/3 system.
For eg, when requesting for a new account, I've chosen an Employee Type attribute as 'Non-Employee' (SAP delivered request attribute) and entered some values for my custom attributes .
And when I chose to change the same user account, I notice that the system doesn't pick up the existing values for any of the attributes and render them. For the Employee Type attribute, it shows the default value and for the custom fields, they are shown blank!!!!
It does seem like the user attribute values from R/3 are being picked up and displayed correctly, but the ones from GRC Database are left out.
I believe this to be a bug and does anyone experienced this issue and found a fix????
Thanks,
Anil

Hi Alpesh,
Thanks for your response.
This brings up a basic question on the repository for saving user attribs...ie. does all these need to be saved on R/3? Assuming yes depending on our current configuration(We have the 'Search' and 'User Details' Data source configured to the same SAP R/3 system), do we have a standard field for saving the 'Employee Type' attrib in SAP?. I did perform a field mapping of a custom attirb to one of the SAP fields in the user master, and get it saved during user provisioning. But it doesn't pick it up from there when I perform a change account. Seems it's missing that reverse mapping. And I've chosen the 'Field Type' of the custom filed to Text as to enable free text during new account request.
Hope you may find something more.
Regards,
Anil

Tomcat doesn't pick up the changes to jsp files

My original problem was JAR locking. I changed context.xml files both in conf\ and my application.
jakarta-tomcat-5.5.9\conf\context.xml
<Context reloadable="true" antiResourceLocking="true" antiJARLocking="true">
 <WatchedResource>WEB-INF/web.xml</WatchedResource>
</Context>myApplication\META-INF\context.xml
<Context reloadable="true" antiResourceLocking="true" antiJARLocking="true">
 <WatchedResource>WEB-INF/web.xml</WatchedResource>
</Context>Now I can undeploy without having jarLocking problem.
But now tomcat doesn't pick up the changes to jsp files automatically!!!
I have to undeploy/deploy even I just change jsp files!
What's wrong?

You can't do anything except speak in a different accent. Apple would have to add specific support for different accents in a future iOS update.

When I try to record videos, the camera doesn't pick up my voice. Is it because I have over 1000 pics/vids?? Because Siri can hear me when I talk to her.... It only doesn't work on videos

When I try to record videos, the camera doesn't pick up my voice. Is it because I have over 1000 pics/vids?? Because Siri can hear me when I talk to her.... It only doesn't work on videos

Hi colin3!
It sounds like you could be having an issue with one of the microphones on your iPhone 5. Your iPhone 5 has three microphones that function together and separately, depending on what is using them.
Apple - iPhone 5 - It’s so much more. And so much less, too.
http://www.apple.com/iphone/features/
Enhanced audio on iPhone 5.
Apple EarPods are just the beginning of the improved audio experience on iPhone 5. It’s designed with three microphones: one on the front, one on the back, and one on the bottom. The front and back mics work together to achieve beamforming — a technique that helps iPhone focus on sound from the desired location for clearer audio. New noise-canceling technology reduces background noise. So when you hold iPhone up to your ear in a loud room, you hear what matters most: the voice on the other end.
There is an article available that can help you troubleshoot the issue a little further and can guide you to some next steps. That article can be found here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Z10 doesn't pick up or automatically connect to existing wi-fi networks

Hi guys I recently did the software update and since that day when I get to work I have to turn wi-fi off and then back on and it will connect to the work network. When I get home I have to do the same thing. Prior to the last update it worked fine and connected automatically whenever I got to work or to home. Is there a setting that I'm missing by chance? I have also deleted both networks searched for them and installed them again and still it doesn't pick them up. It's very frustrating that after an update which I thought was an improvement that it actually behaves poorly. Optus actually told me not to do any software updates as they are not needed and interfere with the settings. Please help anybody.

I am having the same problem with by Z10 software release number 10.1.0.273 ; Please help as I cannot connect to WI-FI anywhere , work , airport, restaurants , home!!

IPhone doesn't pick up wifi automatically

Sometimes it does, sometimes it doesn't. Often my iPhone doesn't pick up wifi when I come into a wi-fi zone and stays on GPRS until I go into setting, wifi and then it picks up the network. Sometimes it does it automatically but it's annoying when it doesn't. It sometimes does the same with network signal if you go into a 'No Service' area and then come out of it it often takes a long time to pick up the network signal again. What could be wrong?

These are wi-fi networks your iPhone has connected with previously?
If not, your iPhone won't automatically connect to an available wi-fi network unless your iPhone has successfully connected to the network previously.
You can try resetting network settings at Settings > General > Reset.
This will erase all saved wi-fi networks and settings your iPhone has connected with previously and require manually re-joining every wi-fi network your iPhone has access to when returning within range of such a wi-fi network. This will also reset your cellular network connection.

2600n doesn't pick up paper

Similar Messages

Maybe you are looking for