2600n Print Quality - repeating pattern down the page

Whatever gets printed at the top of the page text or graphic gets repeated every 2 inches further down the page. I've tried self clean and calibration procedures from service menu and this does not fix. IT worked great fro a year or so...Clean rollers or film on rollers? New fuser? Software drivers? or somtehing else?

I think I found and fixed the problem. I'll know for sure tomorrow morning after the printer has set too cool all night.
I changed some device settings in the Print Quality of the HP Toolbox. I turned ON the following and the issue went away immediately.
In the Optimize section of Print Qualtiy - try turning ON
Extra Cleaning
Trailing Edge Overdevelopment (Full Speed)
Trailing Edge Overdevelopment (Half Speed)
Mottle Prevention
Less Duplex Current
This (seemingly) worked for me, let me know if this helps anyone else.

Similar Messages

Printing starts too far down the page - officejet pro 8600

Have an officejet pro 8600.
Recently, when printing, two probelms occur...
(1) the document being printed starts printing approx 1.5" to 2" futher down the page then it should. This results in the bottom portion of the document Not being printed.
(2) there is a crease/fold approx 3" from the top of the paper.
It appears that either the paper is being fed too soon or the actual printing is being delayed.
We have cleaned all the rollers and check the star wheel - no damages
Thanks for your help
This question was solved.
View Solution.

Hello,
I would suggest realigning the printer.
Setup Menu>Tools>Align Printer
Let me know the outcome.

Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

Print problems. Printing out an email the text starts half way down the page. I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem. If anyone has any ideas I would really apreciate it. Thanks Penny

One more thing to check: System Preferences/Print & Scan. Make sure your printer is set as Default.
I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

How do you modify the web.xml to lock down the pages from a user role

how do you modify the web.xml to lock down the pages from a user role

I'll make a stab at your question:
The following is an example of where a URL is protected within a web.xml deployment descriptor. In this example, the URL /protectedA within the application is protected:

<security-constraint>
<web-resource-collection>
<web-resource-name>protectedA</web-resource-name>
<url-pattern>/protectedA</url-pattern>
</web-resource-collection>

<auth-constraint>
<role-name>sr_developer</role-name>
</auth-constraint>
</security-constraint>
Sun's explaination here:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security4.html

Safari Scrolling Down The Page Automatically

Why is Safari Scrolling Down The Page Automatically? This started 3-Days ago... Also we keep getting the "MacKeep - PopUp" Everytime we Click on an Item in the Original Screen.
We have All the Latest Update for OS X 10.9.5
This is Clearly a Software Issue I have spoken to others who are experiencing the same.
How do we Fix This Bug in Safari?

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I downloaded the latest Adobe Reader when prompted. Since then I cannot use Safari File Print to print web pages - the printer dialogue window opens but the page is blank. Also, when I try to use the safari Help button,the dialogue box is blank.

I downloaded the latest Adobe Reader update when prompted. Since then I cannot use Safari>File>Print to print web pages - the printer dialogue window opens, but the page remains blank. Also when I try to use the Safari Help button, the dialogue box opens but remains infuriatingly blank. Can anyone help me to solve this problem?

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

Expanding text fields not moving next fields down the page

I have a multi-page form with several comment boxes that I want to be expandable (if needed). I've managed to get them to expand, but the fields following the field that is expanding dynamically are not bumping down the page. I've gone through and read about different things to try and use (flowed, western, expand to fit, etc), but the fields following the expanding fields are not moving.
I can send the form I am using to anyone who has a suggestion. I am confused with the hierarchy and where stuff needs to go in order to work correctly.
Thanks.

Hi, it is highly recommended that you create subforms in your form. By creating parts in your form you should create subforms for each of those parts. For the textfield you are trying to make it expandable and flowable to the next page, you must make every of its parents flowed. Your main page is actually set to positioned, even if your subform containing the textfield is flowed, if each of its parents are set to flowed it should work, otherwise it will not flow to next page.
If you set your page to flowed, it will reposition each of your fields because it is not in subforms. Make sure to create subforms for each parts, putting all fields in subforms. If you set your main page to flowed without creating subforms, all of your fields will be redesigned to be aligned left with the hierarchy order.
Hope this help.

When I load Safari on my IPAD2, the web page comes up, but I can't scroll down the page. No matter what web page I go to the content stays darker than the navigation bar. This just started today. All other applications work fine.

When I bring up Safari on my IPAD2, the web page comes up, but I can't scroll down the page. This just started today. No matter what web site I go to, the content is darker than the navigation pane.

If it's happening on all sites, then assuming that it's Safari that you're using, have you tried clearing it's cache : Settings > Safari > Clear Cache (other browsers should have similar options, possibly within the actual app instead of within Settings). You could also try closing the app completely : from the home screen double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app (or whichever browser you're using) to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If it's only happening on a particular site then there may be content on that site that isn't supported on the iPad e.g. flash, java, silverlight

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

Many of my photos appear briefly as I scroll down the page then disappear leaving a box outlined with a broken-line. The menu bar says that I have 300 pictures hidden, but I am unable to get them unhidden.

I am experiencing difficulty with iPhoto '11. Some of more recent photos can not be accessed. As I scroll down the page of photos, the most recent ones appear briefly, then disappear to be replaced with a box outlined by a broken-line. The menu bar says that I have 317 photos hidden. Hiding photos is not something that I normally do, can't imagine why these are hidden. Anyway, when I try to unhide the photos, I can view them as an event, but if I click on a single photo, or try to move it into an album, the photo does not display. Instead I get a dark exclamation point within a triangle. Another problem with these same photos is on the event page there is no key photo for these events only a dark screen. I can't find an answer to my problem. Has anyone experienced this? What is the problem and how can I correct it?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Look at your iphoto 'page'. On the left is a margin running vertically down the page and within that margin are shown your files/folders - e.g 'events', I can't get that margin contents back

Look at your iphoto 'page'.
On the left is a margin running vertically down the page and within that margin are shown your files/folders - e.g 'events', 'last 12 months', 'anniversary' etc etc.
Now visualize the 'page' but WITHOUT the margin and the entries in it. It just disappeared while I was editing photos.
I've tried all the 'File', 'Edit', 'View', 'Share' 'Window' & 'Help' options, but no success.
There is no apparent way of calling up onto the screen any photos, folders etc. because I can't get the margin and its contents back onto the iphoto page.
I've tried restoring the page from my backup, where it is all perfect, but that didn't work.
Help please!

Move your cursor to the extreme left hand side of the iPhoto Window until it turns into a '+' and then click and drag right.

Is there a way to load embedded html as you scroll down the page?

I'm embedding chart.js charts into a muse site and they animate in as soon as they are loaded. What I'd like to do if possible is have each graph animate on as you scroll down the page in a parallax scrolling manner. Is it possible to trigger the code to load not at the same time as the page but instead by using a scrolling effect trigger?

You may try the suggestion mentioned here :
http://stackoverflow.com/questions/21474678/scrolltop-animation-without-jquery
Thanks,
Sanjit

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even downlode my music or watch my movies! what is going on?

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even get my music on it or watch my movies! what is going on?
A box will pop up and tell me there is a new version of itunes to download, but i'm un able to click on that either

Hi Coreenfrombc,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R.

2600n Print Quality - repeating pattern down the page

Similar Messages

Maybe you are looking for