2602 AP in Stand-Alone- Utilizing Both Bands
We typically use the 2602 series AP in lightweight mode, however I have a scenario where we are going to be installing one with the stand-alone software. I understand that we will not be able to utilze certain features that you get with the WLC such as RRM, rogue detection, and clean air.
We do want to utilze both the 2.4GHZ and 5GHZ bands. In order to do this with the 2602 stand-alone AP, will we have to configure 2 separate SSID's? I really do not want to do this to if I do not have to to minimize confusion for clients. Thanks.
Thanks. In this scneario, we are not deploying multiple vlans. This is simply connecting a 2602 stand-alone AP to a SOHO network with only 1 vlan. It is going to be manily used for guest access to the internet. On most home type AP's you have to setup a SSID on the 2.4GHZ and another to use the 5GHZ, then the client can choose which one to connect to.
My question is around that. Do you have to setup 2 SSID's to be able to connect to both bands on he 2602, or can you configure a it in a way similar to how band-select works on a WLAN configured on a WLC? Thanks.
Similar Messages
-
Can we use both Stand alone and Extended classic in one SRM system
Hi All,
Our client is now using Stand alone SRM system with back-end R/3 FI-CO system. Now they want to go Extended classic scenario for few product categories.
Would it be possible to use both in one SRM system? If possible could you please provide what are the sequential steps to do this?
Thanks in advance.
Regards,
RamHi Ramesh,
How did you end up solving your problem, as i have the same scenario. Did you use this BADI (
SRM Server->Business Add-Ins->Control Extended Classic Scenario->Activate Extended Classic Scenario)? Based on my reading, it seems this BADI is relevant to switch between extended classic and classic scenarios.
From what i understand, we can control the standalone scenario via the define backend system configuration (SAP SRM -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category). In my scenario, I have one set of product categories, so i will likely need to implement this BADI (BBP_DETERMINE_LOGSYS, method: DETERMINE_LOGSYS - SAP SRM -> SRM Server -> Business Add-Ins ->Shopping Carts and Requirement Items -> Determine Backend System / Company Code) in order to determine the correct backend system based on company/plant for example.
Did you then leave the extended classic scenario activated (IMG --> Supplier Relationship Management -> SRM Server-> Cross-Application Basic Settings->
Activate Extended Classic Scenario)?
Or how did you achieve both standalone and extended classic using one SRM server?
cheers,
AD -
Using a Mac Mini Server as a traditional stand alone desktop
Hello all, currently I have a late 2008 model 17" MacBook pro, Time Capsule, Apple TV and an Iphone 3GS and Ipod Traditional. I would like to add a desktop system to coordinate all of these items, to be the centerpiece is you will, in my home. I'm interested in buying a mac mini, I began to do research however and saw the Mac Mini Server which has greater memory capacity 4GB vs 2GB RAM, and dual 500Gb vs the standard Mac Mini which has one at 320GB. I would like to take advantage of these upgrades as I'm a writer and will be constantly on the web for work as well as likely keep a lot of items on the hard drive.
However I noticed the Mac Mini server utilizes Mac OSX snow leopard SERVER as opposed to the user grade Mac OSX. *My question is if the Mac Mini Server with MAC OSX server can still be used as a stand alone desktop, connecting it to a spare LCD television I have and a mac wireless keyboard/mouse?*
I'm aware that unlike the other mac mini and imacs it does not come with ilife and other pre-installed software, and *I want to know if it's still possible to purchase after market and install said software utilizing them in the traditional manor?*
Thank you in advance for any feedback you can provide and I apologize if my question was difficult to comprehend due to my lack of computer knowledge. I also apologize if this question is similar to others you've received lately as I did a quick scan of google and these forums and did not seem to find the specific answer I was looking for.Welcome to the Apple Discussions!
Let me clear up a misperception that you have. Both the Mac mini and the Mac mini Server have a capacity to address 8 GB of RAM. There are two SO-DIMM slots in each model. The mac mini comes preconfigured by Apple with 2 GB of RAM (2 x 1 GB). The mini Server comes preconfigured with 4 GB of RAM (2 x 2 GB). You can buy and install yourself up to 8 GB of RAM (2 x 4 GB).
You can even install Mac OS X Snow Leopard client, which will meet your needs a bit better than Server, now that folks have figured out how to do it;
http://discussions.apple.com/thread.jspa?threadID=2539663&tstart=0
And yes you can buy and install iLife, and pretty much everything else that you want to include in your kit. Either model of mini works fine with wireless keyboards and mouses. If your LCD TV has an HDMI port, then a simple HDMI to HDMI cable would be the simplest manner to connect it to the mini.
Dah•veed -
I want to use an Apple AirPort Extreme as my home router but at present I have standard BT broadband using the BT Home hub 3. Can I connect them in some way so I don't need to buy a stand alone modem.
IS THIS POSSIBLE???
1. Would Apple AirPort Express be better and easier?
2. What modem would be suitable if I can't do it any other way?
I AM CURRENTLY USING MY INTERNET WITH PS3,WINDOWS 7 LAPTOP, IPAD AND IPHONE!!!
Any help would be greatly appreciated.
Thanks
John smithYou said that you wanted the layout to look like this:
AT&T 2WIRE Router (wireless off) ---> AirPort Extreme ---> NetGear 16-Port Gigabit Desktop Switch ---> ethernet cabling to ports in most rooms --->
So, we took that at face value....,.but it could look like this if things are more convenient this way, if you prefer:
AT&T 2WIRE > Ethernet Switch > AirPort Extreme and other devices.
- If we include an AirPort Extreme in the overall network setup, are there any potential issues with the 2WIRE router and the AirPort Extreme router "competing" with one another?
No, if you leave the wireless function off on the 2WIRE. If you do want the utilize the wireless on the 2WIRE and the AirPort Extreme, then you want to keep them physically separated by 6-8 feet, or a few meters.
- Do I really need an AirPort Extreme in the final setup?
No, if the AirPort Express will provide enough range for the network.
Or if I just want an extra WAP, can I operate two AirPort Express units (with the same SSID) downstream of a 2WIRE router?
Yes, if both of them are configured to operate in Bridge Mode. If you are using the "wizard" setup utility in AirPort Utility 6.x, the wizard will do this for you automatically.
That is to say, could we have a setup that looks just like the image above, but with an extra AirPort Express tacked on to one of the unused ethernet ports?
You can have as many AirPort Express devices (or AirPort Extreme devices) as you want, as long as each has an Ethernet connection back to the switch. -
EJB lookup works in embedded OC4J but not stand-alone
I use JDeveloper 9.0.3.1 to develop a combined web & EJB application. The EJBs are deployed on a 9.0.3 iAS server on a different machine.
The EJB lookup is in a helper class that's called by the servlet. For EJB lookup, I use the class "com.evermind.server.rmi.RMIInitialContextFactory" as described by the OC4J servlet guide (http://download-uk.oracle.com/docs/cd/A97688_10/generic.903/a97680/develop.htm#1003973). So my code looks like this:
Hashtable map = new Hashtable();
map.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
map.put(Context.PROVIDER_URL, "ormi://server:port/app-business");
map.put(Context.SECURITY_PRINCIPAL, "admin");
map.put(Context.SECURITY_CREDENTIALS, "password");
map.put("dedicated.rmicontext", "true");
InitialContext context = new InitialContext(map);
Object thing = context.lookup("MyEjb");
EJBHome feedback = (EJBHome)PortableRemoteObject.narrow(thing, "com.company.ejb.MyEjbHome");
The last insert into the map (map.put("dedicated.rmicontext", "true");) wasn't mentioned neither in the servlet guide nor the EJB one. But without it, I'd always get some "domain is null" error.
Now this code above works flawlessly in the embedded OC4J of JDeveloper. But it always hangs in the "Object thing = context.lookup("MyEjb");" line when executed either in a stand-alone OC4J (the one from JDeveloper launched through the batch file in [JDeveloper directory]\jdev\bin\start_oc4j.bat) or in the OC4J in iAS.
Does anybody know why this happens or how to fix it? I know that there are other ways of EJB lookup in servlets but since we also have plain Java classes for testing purposes that access EJBs, this seemed like the simplest thing to do for both Java classes and servlets.I was referring to the java client case where this optoin is not required. In general for web clients one doesn't use the rmi initial context to find the bean. This is because the bean and the webclient are both packaged in the same application. One defines the ejb-ref in the web.xml for the bean and then looks it using the default initial context. Something like
Context ctx = new InitialCOntext();
ctx.lookup("bean ejb-ref-name");
However if you must use rmi for accessing the bean from the web client then the dedicated connection property is required.
For java clients you would setup the rmi context environment.
Since you are trying to use a common utility class for both java and webclient I would recommend that you look into packaging the java client as a j2ee application client. Basically in that case you would be able to define a ejb-ref in the aplication-client.xml and use the default initial context in code for both the cases.
Hope that helps
Dhiraj -
Stand-alone JNDI lookup of an EJB in an Enterprise Application (EAR) build
Hi All,
I am having some difficulty doing JNDI look up an EJB 3.0 Bean that is part of an Enterprise Application (EAR) build. Below are all the related codes:
package ejb;
import javax.ejb.Local;
@Local
public interface Hello1Local {
public String getHello1();
package ejb;
import javax.ejb.Stateless;
@Stateless
public class Hello1Bean implements Hello1Local {
public String getHello1() {
return "I am Hello1 Bean!";
package ejb;
import javax.ejb.Remote;
@Remote
public interface Hello2Remote {
public String getHello2();
package ejb;
import javax.ejb.Stateless;
import javax.ejb.EJB;
@Stateless
@EJB(name="ejb/Hello1",
beanInterface=Hello1Local.class,
beanName="Hello1Bean")
public class Hello2Bean implements Hello2Remote {
@EJB private Hello1Local hello1bean;
public String getHello2() {
return hello1bean.getHello1();
There is no problem looking up Hello2 Bean using an Application Client such as the following:
public class LocalHelloApplicationClient {
@EJB(name="Hello2")
private static Hello2Remote hello2Bean;
public static void main(String[] args) {
System.out.println("hello2Bean.getHello2(): " + hello2Bean.getHello2());
}There is also no problem doing JNDI lookup (from a Stand-Alone Client the same bean if both Hello1 and Hello2 were created by themselves. ie not part of an Enterprise Application (EAR) build. However, I am wondering whether it is possible to do JNDI lookup of the same bean (Hello2) that is part of an Enterprise Application (EAR) built. Below are the type of JNDI lookup entries that I have tried without success:
public class StandalonePojoCallHelloWorld {
public static void main(String [] args)
try
InitialContext jndiContext = new InitialContext();
Hello2Remote hello2Bean = (Hello2Remote) jndiContext.lookup("ejb.Hello2Remote");
or
Hello2Remote hello2Bean = (Hello2Remote) jndiContext.lookup("LocalHelloEnterpriseApplication.Hello2.remote");
or
Hello2Remote hello2Bean = (Hello2Remote) jndiContext.lookup("LocalHelloEnterpriseApplication.ejb.Hello2Remote");
or
Hello2Remote hello2Bean = (Hello2Remote) jndiContext.lookup("LocalHelloEnterpriseApplication.Hello2Remote");
or
Hello2Remote hello2Bean = (Hello2Remote) jndiContext.lookup("LocalHelloEnterpriseApplication.LocalHelloEnterpriseApplication-ejb.Hello2Remote");
System.out.println("hello2Bean.getHello2(): " + hello2Bean.getHello2());
catch (javax.naming.NamingException ne)
ne.printStackTrace();
They all came up with the same error message:
javax.naming.NameNotFoundException: LocalHelloEnterpriseApplication.LocalHelloEnterpriseApplication-ejb.Hello2Remote not found
at com.sun.enterprise.naming.TransientContext.doLookup(TransientContext.java:216)
at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:188)
at com.sun.enterprise.naming.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:74)
at com.sun.enterprise.naming.RemoteSerialContextProviderImpl.lookup(RemoteSerialContextProviderImpl.java:129)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)Any suggestion would be appreciated.
Thanks,
JackHello
I've somme problems to get access to ejb interface from remote stand-alone client.
Here is my EJB code :
package stateless;
import javax.ejb.Stateless;
@Stateless(name = "TestSB", mappedName = "ejb/stateless/TestSB")
public class TestEJBBean implements TestEJBRemote {
public String getMessage() {
return "Hello EJB World";
}And the remote interface :
package stateless;
import javax.ejb.Remote;
@Remote
public interface TestEJBRemote {
String getMessage();
} In client side, i just edit main.java like this :
package testclient;
import java.io.FileInputStream;
import java.util.Properties;
import javax.naming.InitialContext;
import stateless.TestEJBRemote;
public class Main {
public static void main(String[] args) throws Exception {
Properties props = new Properties();
props.load(new FileInputStream("jndi.properties"));
InitialContext ctx = new InitialContext(props);
TestEJBRemote testEJB = (TestEJBRemote) ctx.lookup("ejb/stateless/TestSB");
System.out.println(testEJB.getMessage());
}here is my jndi.properties file (my glassfish server IP is 192.168.0.10) :
java.naming.factory.initial = com.sun.enterprise.naming.SerialInitContextFactory
java.naming.factory.url.pkgs = com.sun.enterprise.naming
java.naming.factory.state = com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl
org.omg.CORBA.ORBInitialHost = 192.168.0.10
org.omg.CORBA.ORBInitialPort = 3918when i run client on the same machine than the glassfish app server, it works fine.
But i run it on the different machine than the glassfish app server (on the same LAN without firewall), it fails with this error message :
eclan@eclan-laptop:~/NetBeansProjects/TestClient$ java -jar dist/TestClient.jar
24 août 2008 09:53:05 com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl <init>
ATTENTION: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.1.1; port: 3918"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2690)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2711)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:261)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:274)
at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:130)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:192)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:181)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:325)
at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
at com.sun.enterprise.naming.SerialContext.narrowProvider(SerialContext.java:131)
at com.sun.enterprise.naming.SerialContext.getRemoteProvider(SerialContext.java:220)
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.java:160)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:398)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at testclient.Main.main(Main.java:14)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:347)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:244)
... 13 more
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:507)
at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:105)
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:332)
... 14 more
24 août 2008 09:53:05 com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl <init>
ATTENTION: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.1.1; port: 4038"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2690)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2711)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:261)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:274)
at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:130)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:192)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:181)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:325)
at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
at com.sun.enterprise.naming.SerialContext.narrowProvider(SerialContext.java:131)
at com.sun.enterprise.naming.SerialContext.getRemoteProvider(SerialContext.java:220)
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.java:160)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:398)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at testclient.Main.main(Main.java:14)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:347)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:244)
... 13 more
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:507)
at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:105)
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:332)
... 14 more
24 août 2008 09:53:05 com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl <init>
ATTENTION: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.1.1; port: 4138"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2690)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2711)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:261)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:274)
at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:130)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:192)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:181)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:325)
at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
at com.sun.enterprise.naming.SerialContext.narrowProvider(SerialContext.java:131)
at com.sun.enterprise.naming.SerialContext.getRemoteProvider(SerialContext.java:220)
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.java:160)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:398)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at testclient.Main.main(Main.java:14)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:347)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:244)
... 13 more
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:507)
at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:105)
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:332)
... 14 more
24 août 2008 09:53:05 com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl <init>
ATTENTION: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.1.1; port: 3918"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2690)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2711)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:261)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:274)
at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:130)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:192)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:181)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:325)
at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
at com.sun.enterprise.naming.SerialContext.narrowProvider(SerialContext.java:131)
at com.sun.enterprise.naming.SerialContext.getRemoteProvider(SerialContext.java:220)
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.java:160)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:398)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at testclient.Main.main(Main.java:14)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:347)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:244)
... 13 more
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:507)
at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:105)
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:332)
... 14 more
24 août 2008 09:53:05 com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl <init>
ATTENTION: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.1.1; port: 4038"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2690)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2711)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:261)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:274)
at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:130)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:192)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:181)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:325)
at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
at com.sun.enterprise.naming.SerialContext.narrowProvider(SerialContext.java:131)
at com.sun.enterprise.naming.SerialContext.getRemoteProvider(SerialContext.java:220)
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.java:160)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:398)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at testclient.Main.main(Main.java:14)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:347)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:244)
... 13 more
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:507)
at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:105)
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:332)
... 14 more
24 août 2008 09:53:05 com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl <init>
ATTENTION: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.1.1; port: 4138"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2690)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2711)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:261)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:274)
at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:130)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:192)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:181)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:325)
at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
at com.sun.enterprise.naming.SerialContext.narrowProvider(SerialContext.java:131)
at com.sun.enterprise.naming.SerialContext.getRemoteProvider(SerialContext.java:220)
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.java:160)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:398)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at testclient.Main.main(Main.java:14)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:347)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:244)
... 13 more
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:507)
at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:105)
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:332)
... 14 more
eclan@eclan-laptop:~/NetBeansProjects/TestClient$ THANKS YOU FOR YOUR HELP
Justin -
Firmware upgrade Stand-Alone C-Blade network issues
Hello,
I recently upgraded my Stand-Alone C22 M3 blade from version 1.5.5 to version 2.0(3d)
The VIC 1225 got firmware version 4.0(1b) (old version 2.2(1b))
After the upgrade using the Host Upgrade Utility I removed all old drivers and installed the newest versions.
so far so good, but almost immediately i noticed very poor basic nateworking.
DNS lookups fails
pings got lost
tracerts can be instant or take forever to complete
We use this blade as a commvault backup server and both VIC 1225 Nics are in a LACP team (Status is Active)
on the host switch Nexus 5548UP there is a FC interface bind to the network interface so we have our backup libaries available on the host
Only if i keep pinging the servers i want to backup the network connection stays stable, otherwise backups will fail.
after downgrading the firmware of the vic back to 2.2(1b) everything went to normal again.
is there any explanation for this? known bug?
Thanks,
IvoYou also have a etherchannel configured on your nexus 5K, isn't it right?
Take a look at the logging messages and try to find a MAC_FLAPPING message related to the servers MAC addresses.
Also check out this bug: https://tools.cisco.com/bugsearch/bug/CSCuf65032.
It was corrected on the version 2.22(1b) (your old one), but it may be back on the 4.0(1b).
Try to apply the workaround suggested and see if it works.
Cheers,
Kauy Gabriel. -
Need help in creating a web application that runs on a stand alone sys.
I am planning a small java web application complete with database. I need to know if there are any ways to deploy that application on a stand alone system and that if there is any way to make an executable for that application so that the user need not go through the process of deploying the app and starting the server whenever he restarts the system. Can anyone help me in this regard? Thanks in advance.
Hi Alex,
Since I had a Gmail test servlet kicking around, I ran it on the latest V3 nightly build.
On the first run, I encountered the following nested exceptions:
javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465
--> java.net.SocketException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
--> java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
--> java.security.UnrecoverableKeyException: Password must not be nullThe UnrecoverableKeyException is a manifestation of [https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938|https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938]
I worked around this by adding the following JVM config options to domain.xml
<jvm-options>-Djavax.net.ssl.keyStorePassword=changeit</jvm-options>
<jvm-options>-Djavax.net.ssl.trustStorePassword=changeit</jvm-options> (Note: the default master password is "changeit")
These lines are placed in /domain/configs/config/java-config of domain.xml for the particular server config you're using. There's only one server config in the default domain.xml shipped with V3. Then restart the server.
I retested the code on both port 465 and 587, with and without the above config changes. Without the change, they both fail the same way, and with the change, they both work. Let me know if this helps.
-Peter -
In iTunes my iPhone refers me to iTunes on my computer for verification. iTunes won't work on my computer. How can both my iPhone and iPad stand alone?
Turns out that when my iPod Touch was restored, the restrictions had been turned ON for Facebook and several other apps. This is what was preventing the Facebook app from accessing my Camera Roll for picture downloads. This is odd since all of my iPod backups would not have had those settings turned on. This is also the first time this has occurred given the few times I've had to restore my iPod Touch.
Anyway if you experience the same behavior from your iPod or iPhone with iOS 8.0.2, just go to the General settings and review your settings under Restrictions. Once you set them to allow for changes, you should be back in business. -
My DVD's Audio is fine on the Mac - but MISSING on stand-alone player
Slightly wrong forum (sorry) but all the experts are here!
Re-hashing my 4:3 DV (PAL) movie for a re-release of the DVD and all's gone extremely well until now.
On my (DVDSP) burned DVD all video is working fine - the audio files are .ac3
No audio in the AUDIO_TS folder on disc - or in the cache (using finder).
Where did I go wrong?
How can it play perfectly on the Mac (DVD Player) and there be NO AUDIO on the stand-alone?
Thanks in anxious anticipation!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Panasonic HVX200 Mac OS X (10.4.9)
"I've taught you all I know, and still you know nothing".Thanks both.
Talk about a fun Friday, we have HUGE floods here (no - nothing to do with the DVD problem, OR the vacuum cleaner) the UK's had an abnormal amount of rain recently and today's been hideous!
To get back to the topic, as in all pro studios, the DVD player is on the floor - and the carpet was vacuumed yesterday. I notice the player had moved but it didn't dawn on me to check the cables.
Typical of me - assume there's a really serious technical problem first - check the obvious last!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Panasonic HVX200 Mac OS X (10.4.9)
"I've taught you all I know, and still you know nothing". -
Flash Player Renders Images Differently in Browser than Stand-alone Player
Hey, guys!
Not sure if this is a Flash issue or a Flash Player issue, but here we go...
I`m currently working on a Flash project with a great deal of images.
Flash does a great job compressing images, but in some cases it messes up the colors.
I have a big image on the background and it`s set to 80 compression from the Properties panel.
Everything looks fine in the stand-alone Flash Player when exporting from the IDE or even opening from disc, but when I insert the SWF in a HTML page (with SWFObject, dunno if it matters) some werid artifacts show up, and also the colors get shifted to slightly different values (I can tell since I have a background that should match the SWFs background!)...
There is a workaround, though. Setting compression to Lossless... Then everything looks EXACTLY the same both in the stand-alone player and in the browser. Just that you end up with a 900 kilo image instead of 200 and something... :|
And if you have several images that have to be treated "Losslessly", you end up with a pretty big SWF!
My other workaround was to sample the colors in the browser and modify the ones in my CSS for the HTML background.
That works well for the colors, but I still end up with some ugly artifacts, even when compression is set to 100!
And, again, the strange thing is that in the stand-alone player, everything is honkey dorey, the colors and all!
NOTE: the project I`m working on is a Flash 10 file, ActionScript 2, if that would matter...
Thank you for your time and I appreciate any suggestion/explanation!
Alexi've had a problem before with the fps and a mac.
how big is your file?
i usually make my movies around 24 fps to keep load off of
the cpu which could make it run slower -
Error while starting stand alone applicaitons in Web Center Content
Hi All,
I am getting this error while starting any standalone component in Oracle WebCenter Content Server :
WARNING: Jps platform factory creation failed. Reason: {0}.
java.security.PrivilegedActionException: oracle.security.jps.JpsException: JPS-0
*0065: Jps platform factory creation failed. Reason: java.lang.ClassNotFoundExcep*
tion: oracle.security.jps.tomcat.JpsTomcatPlatformFactory.
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.ee.JpsPlatformFactory.getPlatformFactory(JpsPlatf
ormFactory.java:185)
at oracle.security.jps.ee.JpsPlatformFactory.getPlatformFactory(JpsPlatf
ormFactory.java:146)
at oracle.security.jps.internal.audit.AuditServiceImpl.initAuditor(Audit
ServiceImpl.java:319)
at oracle.security.jps.internal.audit.AuditServiceImpl.getAuditor(AuditS
erviceImpl.java:238)
at oracle.security.jps.internal.audit.AuditServiceImpl.getAuditor(AuditS
erviceImpl.java:373)
at oracle.security.jps.util.AuthZAuditUtil$3.run(AuthZAuditUtil.java:183
at oracle.security.jps.util.AuthZAuditUtil$3.run(AuthZAuditUtil.java:181
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.AuthZAuditUtil.initAuditor(AuthZAuditUtil.ja
va:181)
at oracle.security.jps.util.AuthZAuditUtil.isEventLoggable(AuthZAuditUti
l.java:136)
at oracle.security.jps.util.AuthZAuditUtil.auditAuthZ(AuthZAuditUtil.jav
a:427)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:554)
at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(C
sfUtil.java:643)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.getCred
entialMap(SspCredentialStore.java:497)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idc.conversion.jps.CSFKeyLoaderAction.run(CSFKeyLoaderAction.java:56)
at java.security.AccessController.doPrivileged(Native Method)
at idc.conversion.jps.CSFKeyLoader.readKeys(CSFKeyLoader.java:166)
at intradoc.conversion.StandardKeyLoader.load(StandardKeyLoader.java:61)
at intradoc.conversion.SecurityObjects.loadKeys(SecurityObjects.java:528
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:133)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPas
swordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(Crypto
PasswordUtils.java:136)
at intradoc.server.IdcSystemLoader.managePasswords(IdcSystemLoader.java:
*3118)*
at intradoc.server.IdcSystemLoader.finishInit(IdcSystemLoader.java:396)
at intradoc.server.IdcSystemLoader.init(IdcSystemLoader.java:335)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:120)
at intradoc.apputilities.idcshell.InteractiveShellStartup.init(Interacti
veShellStartup.java:253)
at intradoc.apputilities.idcshell.InteractiveShellStartup.startup(Intera
ctiveShellStartup.java:52)
at IdcShell.main(IdcShell.java:27)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.loader.IdcClassLoader.invokeMain(IdcClassLoader.java:352)
at intradoc.loader.IdcClassLoader.startMain(IdcClassLoader.java:170)
at intradoc.loader.IdcClassLoader.main(IdcClassLoader.java:140)
Caused by: oracle.security.jps.JpsException: JPS-00065: Jps platform factory cre
ation failed. Reason: java.lang.ClassNotFoundException: oracle.security.jps.tomc
at.JpsTomcatPlatformFactory.
at oracle.security.jps.ee.JpsPlatformFactory$2.run(JpsPlatformFactory.ja
va:193)
at oracle.security.jps.ee.JpsPlatformFactory$2.run(JpsPlatformFactory.ja
va:186)
*... 41 more*
Mar 7, 2013 2:55:58 PM oracle.security.jps.internal.audit.AuditServiceImpl initA
uditor
WARNING: Failed to get server log directory. Reason: oracle.security.jps.JpsExce
ption: JPS-00065: Jps platform factory creation failed. Reason: oracle.security.
jps.JpsException: JPS-00065: Jps platform factory creation failed. Reason: java.
lang.ClassNotFoundException: oracle.security.jps.tomcat.JpsTomcatPlatformFactory
intradoc.common.ServiceException:
at intradoc.server.IdcServerManager.init(IdcServerManager.java:230)
at intradoc.apputilities.idcshell.InteractiveShellStartup.init(Interacti
veShellStartup.java:253)
at intradoc.apputilities.idcshell.InteractiveShellStartup.startup(Intera
ctiveShellStartup.java:52)
at IdcShell.main(IdcShell.java:27)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.loader.IdcClassLoader.invokeMain(IdcClassLoader.java:352)
at intradoc.loader.IdcClassLoader.startMain(IdcClassLoader.java:170)
at intradoc.loader.IdcClassLoader.main(IdcClassLoader.java:140)
Caused by: intradoc.data.DataException: !apErrorWithTable,DocMetaDefinition
at intradoc.shared.MetaFieldData.initIndexes(MetaFieldData.java:171)
at intradoc.shared.MetaFieldData.init(MetaFieldData.java:84)
at intradoc.server.subject.MetaDataSubjectCallback.cacheMetaData(MetaDat
aSubjectCallback.java:42)
at intradoc.server.subject.MetaDataSubjectCallback.refresh(MetaDataSubje
ctCallback.java:35)
at intradoc.server.IdcSystemLoader.loadCachedTables(IdcSystemLoader.java
*:1255)*
at intradoc.server.IdcSystemLoader.loadCaches(IdcSystemLoader.java:1164)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:132)
*... 10 more*
Caused by: intradoc.data.DataException: !syColumnDoesNotExist,dDecimalScale
at intradoc.data.ResultSetUtils.getIndexMustExist(ResultSetUtils.java:44
*7)*
at intradoc.shared.MetaFieldData.initIndexes(MetaFieldData.java:167)
*... 16 more*
Error with table 'DocMetaDefinition'.
The column 'dDecimalScale' does not exist in this table.
I am using 11.1.1.6 free version of webcenter content and using appropriate database with required tables created by RCU of appropriate version and also using required weblogic server.
Is there anything like , we are not allowed to use stand alone application in free version ? or problem is something else.
Thank you in advance.
Edited by: 957580 on Mar 7, 2013 2:01 AMHi Deepak,
Thanks for Reply.
But in /home/sapcs/conf/http.conf file its already maintained like this, sending you some part of httpd.conf file
Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the #<VirtualHost> # directive.
Change this to Listen on specific IP addresses as shown below to prevent Apache from glomming onto all bound IP #addresses.
Listen 1090
User/Group: The name (or #number) of the user/group to run httpd as.
It is usually good practice to create a dedicated user and group for
running httpd, as with most system services.
User sapcs
Group sapsys
</IfModule>
</IfModule>
even after restarting server i am getting same problem
[sapcs@hpsebdev1 bin]$ apachectl start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
I am using a non root user to start apachectl command
Regards
Gagan Sharma -
Cannot install Applcations in Stand-Alone Media image
Since updating from SCCM 2012 R2 to CU3 i have not been able to get our Stand-Alone media to work.
The Task Sequence is running fine until it gets to the install of the SCCM client. The installation of the client runs and then it restarts and then it runs it again, but when the task is done it goes to the login screen of Windows and ignores all the steps
which comes after the client install.
I have put in some alerts in order to find out exactly where is fails and the alert which runs prior to the client install is shown but the alert immediately after the install is never run.
I am beginning to supect that the client install is failling.
I have updated the package on the DP wihthout success.
TS:
SMSTS.LOG
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="08:48:39.816+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="08:48:39.831+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1462">
<![LOG[Enabling local administrator account]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1219">
<![LOG[Account was already enabled]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1228">
<![LOG[Re-assign all drive letters...]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="diskutils.cpp:1941">
<![LOG[The drive information which has no drive letter can not be found. No need to re-assign driver letters.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="diskutils.cpp:1951">
<![LOG[Installing SMS client]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1474">
<![LOG[Clearing existing client configuration.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:291">
<![LOG[Cleaning existing client certificates from SMS certificate store]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="installclient.cpp:138">
<![LOG[The client identity was not found in the environment. A new identity will be generated for this client.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:363">
<![LOG[Using CRL: true]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:952">
<![LOG[Unable to read SMS client cert from environment. Not restoring SMS client cert.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="2" thread="2152" file="installclient.cpp:962">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Register:WinPE]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 2180 ]==========]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:330">
<![LOG[Registering COM classes]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:187">
<![LOG[sbModulePath = C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="tsprogressuiclass.cpp:625">
<![LOG[Shutdown complete.]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Successfully registered TS Progress UI.]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:2279">
<![LOG[Executing command line: "C:\_SMSTaskSequence\OSD\PRI00158\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\PRI00158 /config:MobileClient.TCF /status:564]LOG]!><time="08:48:39.987+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[Launching command shell.]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:202">
<![LOG[executing command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:63">
<![LOG[executed command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:80">
<![LOG[Process completed with exit code 0]LOG]!><time="08:50:19.515+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Start to cleanup TS policy]LOG]!><time="08:50:19.515+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="utils.cpp:3055">
<![LOG[End TS policy cleanup]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="utils.cpp:3103">
<![LOG[Active request handle is empty, registering with new active request handle. This is expected if the TS was started from a media/PXE.]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="2" thread="2152" file="utils.cpp:4522">
<![LOG[Saving the new active request handle for the task sequence: {03EB3804-5F8D-4AA4-9C9F-5FE7E57A4FB0}]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:4535">
<![LOG[Succesfully registered the tasksequence with the execution manager]LOG]!><time="08:50:19.547+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:4597">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="08:50:20.576+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 512 ]==========]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:330">
<![LOG[Unregistering COM classes]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:204">
<![LOG[Shutdown complete.]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Successfully unregistered TS Progress UI.]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:2320">
<![LOG[Moving logs to SMS client directory]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1495">
I hope someone out there can point me in the right directionHi Martin
Could you try adding a delay in the task sequence after the reboot, I have experienced a number of problems with SCCM 2012 R2 and reboots in task sequences. Microsoft Premier Support recommend creating a 5 minute delay. A shorter one may resolve the problem,
I would recommend trying this first.
The other thing to check is how are you preparing you boot media are you using a usb, if so is it formatted to NTFS or FAT32, I would always recommedn NTFS -
Etherchannel showing down (SD) and ports are in "I" stand alone state
Hi,
Netapp server is connected to switch 6500 via trunk.
I configured a portchannel but it showing as down.take a look ar below output..
interface Port-channel248
description Netapp-server-1 po248
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 903
switchport mode trunk
switchport nonegotiate
no ip address
no shut
interface GigabitEthernet3/33
description server-1
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 903
switchport mode trunk
switchport nonegotiate
no ip address
speed 1000
udld port aggressive
spanning-tree portfast
channel-group 248 mode active
no shut
interface GigabitEthernet4/33
description cnndcfasp002a-e5d
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 903
switchport mode trunk
switchport nonegotiate
no ip address
speed 1000
udld port aggressive
spanning-tree portfast
channel-group 248 mode active
no shut
Switch-6500#sh etherchannel summary
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
M - not in use, minimum links not met
u - unsuitable for bundling
w - waiting to be aggregated
Number of channel-groups in use: 5
Number of aggregators: 5
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
248 Po248(SD) LACP Gi3/33(I) Gi4/33(I)
#sh etherchannel detail
Group: 248
Group state = L2
Ports: 2 Maxports = 16
Port-channels: 1 Max Port-channels = 16
Protocol: LACP
Minimum Links: 0
Ports in the group:
Port: Gi3/33
Port state = Up Sngl-port-Bndl Mstr Not-in-Bndl
Channel group = 248 Mode = Active Gcchange = -
Port-channel = null GC = - Pseudo port-channel = Po248
Port index = 0 Load = 0x00 Protocol = LACP
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
A - Device is in active mode. P - Device is in passive mode.
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi3/33 SA indep 32768 0xF8 0xF8 0x321 0x7D
Age of the port in the current state: 0d:02h:04m:58s
Port: Gi4/33
Port state = Up Sngl-port-Bndl Mstr Not-in-Bndl
Channel group = 248 Mode = Active Gcchange = -
Port-channel = null GC = - Pseudo port-channel = Po248
Port index = 0 Load = 0x00 Protocol = LACP
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
A - Device is in active mode. P - Device is in passive mode.
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi4/33 SA indep 32768 0xF8 0xF8 0x421 0x7D
Age of the port in the current state: 0d:02h:04m:58s
Port-channels in the group:
Port-channel: Po248 (Primary Aggregator)
Age of the Port-channel = 7d:16h:30m:16s
Logical slot/port = 14/3 Number of ports = 0
Port state = Port-channel Ag-Not-Inuse
Protocol = LACP
Any one please let me know what is the issue here...
Thanks
GauthamExactly, the 6500 config is fine, probably the NETAPP is not active or passive and it's just ON that won't work
show lacp 248 neighbor will show if you have a neighbor and if the LACP id is the same on both ports
Core1#sh lacp 2 neighbor
Flags: S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode P - Device is in Passive mode
Channel group 2 neighbors
Partner's information:
Partner Partner LACP Partner Partner Partner Partner Partner
Port Flags State Port Priority Admin Key Oper Key Port Number Port State
Gi1/7/10 SA bndl 32768 0x0 0x1 0x11A 0x3D
Gi2/7/10 SA bndl 32768 0x0 0x1 0x31D 0x3D
cheers -
Export from iMovie to stand-alone DVD hard drive
I want to preserve camcorder home movies edited in iMovie. The DVD recorded from iDVD won't play on my existing DVD player. Could I use the hard drive of a stand-alone DVD recorder/player to import from iMovie? I don't currently own one.
iMacG5 Mac OS X (10.4.3) Tapes from miniDv Canon Optura 60A key consideration is the amount of free space on your boot hard drive. You will probably need a minimum of 15 to 20 GB to complete your project in iDVD. If you will have this amount of free space after copying over the files, go ahead.
BTW, if you plan on making several copies, make your first 'burn' to a disk image on your hard drive (it's an option under 'File' if I remember correctly).
Verify the disk image with Apple's DVD Player and then burn the copies you need with Apple's Disk Utility. See http://docs.info.apple.com/article.html?artnum=42724 and http://docs.info.apple.com/article.html?artnum=93006
Maybe you are looking for
-
Help needed in writing installers for swing application
Hi , I want to write an installer for one of our home grown profiler tool. I need to write the installer for different platforms such as windows,linux,solaris,HP-UX. Does anybody have any idea of how to go ahead in writing installations. Share if the
-
Hi, I we have 100 one time vendor, hope we don't have to maintain master record for each vendor but how can we main their account and do payment transactions. I read the SAP material it says we have to create collectiv master record, does it mean one
-
What's going on with my Media settings?
Hello, I'm using Acrobat 9 pro for Mac (snow leopard) and experiencing a few issues. When I select the print settings dialog, I am presented with the following (attatched). I am un able to print to Epson gloss, semi-gloss or lustre papers, only Matte
-
Replication issue between RSA3 to BI(PSA)
Hi, While am extracting data from R/3 to BI , some of the records in STATUS fields in notification header datasource not replicate in BI . Data is available in RSA3 for STATUS field . But While extracting with infopackage to BI, Some of the Recor
-
Importing Photos From iPhone to iPhoto - Lost Photos
Just wanted to mention that I lost about 10 pictures during an import to iPhoto. When I plugged in the iPhone, iPhoto popped up, as normal. I chose "Select all" and when it was done, I chose "Delete files" from phone. Then the progress bar got stuck