261 and 914 implications

hi everyone ,
can anybody explain me the exact implications of 261 movement type and 914 interim storage type. How they are used, in what context?
waiting for ur valuable reply
thank you
have a great day

hi balaji,
In warehouse mamagent while using 261 movement type for issuing against the service order,the material moves from the bin location to interim storage area(914).
For this process a to will be created automatically in mb11 trx.
after confirming the to only billing request can be carried out in DP90 trx.
for movement type 261 , you have assigned the interim storage area 914 in customizing
Regards,
velu
Edited by: kulandaivelu rajasekaran on Apr 17, 2008 5:18 PM

Similar Messages

Allow mov type 261 and 262 for a material type only

Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
No any other movt type allowed for this material type while issuing material.
All suggestions welcomed.
Regards,
Rakesh

Thanx amit.
But same user uses all other movt types for other material type also.

How to stop 261 and 262 MVT types after GR for production Order.

hi,
After GR [MB31] against the Production order, 261 and 262 movments should not be happen, but in present proces its taking place,
Client dont want to happen it,
Can any body tell me how to controll this.
Veera.

Hi Veerakumar ,
You can TECO the production order if reqd since delivery complete status of the order.
or you can go to system status and do as explained .
Regards,
Vimal

How to block movement type 261 and 262 from several storage locations

Dear Expert,
Can we block the 261 and 262 movement type from several storage locations? These storage locations are not affected by the MRP run, where for the materials that have been moved to these storage locations their existance are not count. These storage locations could not be used for confirmation production order, therefore i want to block 261 and 262 movement type from these storage locations.
Thanks
Pauline

Dear Pauline,
if my understanding is correct abt ur query,
1) you want in confirmation screen, Consumption should happen only from one storage location
2) Rest all storage locations should not be allowed
3) Maintain Storage location in BOM component view, in mass you can maintain in CEWB
4) Now GO with SHD0, Make storage location field as Out put only, for CO11N Transaction
Plz refer this link for SHD0 Demo
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
Regards
Madhu Kumar

Movement 261 and 262

Hi All,
I am having a problem regarding movement type 261 and 262.
When I am doing 261, in production order withdrawn quantity is getting updated and acording to that the Cost of that component also gets updated. And storage location Stock getting decreased respectively.
But when I am doing 262, nothing is updated(withdrawn quntity in production order - component overview & Cost of that component). But respective Stock is getting increased in storage location.
What is the problem. OR what procedure should I follow to overcome from this problem.

Again i m clearifying my problem with example...
Suppose, i m doing GI (movement type 261) using MIGO or CO27 for one component in production ordr.
Then it is appearing as a "Quantity withdrawn" in "Component overview" in production order. say 10 pc.
Then stock of perticular storage location will be decrease by 10 pc.
But when I am doing reverse GI (mvnt 262) using MB1A then "Quantity withdrawn" field should become blank, i mean zero. but that is not happening. But stock of perticular sorage location is Increased by 10 pc in right way.
So, I can say it is right according to Stock increase and decrease. But, by seeing component overview i can't say the situation of GI.
Is there any setting in SPRO?
plz give guidence.
Points will be rewarded.

Lightroom and Photoshop Implications for switching platforms from a PC to Mac

I'm looking at purchasing a new computer and making the swing from PC to Mac. Currently, I'm running Photoshop CS5 and Lightroom 4 on my PC. If I switch to a Mac, what are the implications? Can my Lightroom catalogs on my PC be easily transferred? Will I be forced to upgrade to creative cloud?

You can still purchase Photoshop CS6, I think.
Yes, definitely.
Whether it's worth upgrading to 2.5 year old superseded software is up to the purchaser.
Link: Creative Suite 6
The $10/month Cloud Photography Plan (PS CC 2014 + LR5 + LR mobile) may be worth considering

Operating Ssyetem Upgrade and R12 implications

Hi friends
We have just migrated to R12.1.3 and database 11g and now we are planning to upgrade OS from AIX 5.3 R12 to 6.1
Kindly advise if implication on functionalities on R12 and if any bug or bug list before or after upgrade of OS.
Regards
Kam

492262 wrote:
Hi friends
We have just migrated to R12.1.3 and database 11g and now we are planning to upgrade OS from AIX 5.3 R12 to 6.1
Kindly advise if implication on functionalities on R12 and if any bug or bug list before or after upgrade of OS.
Regards
KamYou need to relink executable files afte the OS upgrade.
How to relink an Applications Installation of Release 11i and Release 12 [ID 356878.1]
How to Relink Oracle Database Software on UNIX [ID 131321.1]
Thanks,
Hussein

Production order reference 261 and 261 movements

Dear Gurus,
We have a situation, as per our client requirement we are building a customized Z-report which is production order information report as per the clients business process:
In a production order consumption of HALB material will be done with no. of batches so at this point of time when ever confirmation is done then there will be a document will be generated to 261 movement type.
At the same time user got to know that the posted batches are wrong so again he cancelled it with movement type 262 will be appeared.
In our report, business logic was given as, the cancelled batches should not be appeared in report so we go through with the logic order number---> reference to movement types with 261 & 262 and with same batches.
My doubt is while 261 movement type one document number is generating and if they are going to cancel 262 movement type it is generating different document number.
As I observed if they are cancelling it through MIGO it is generating some other document number and for some cases it is generating reference documents but not for some.
I would like to know the reason for this and configuration as well.
Any one can give me the complete analysis on this please asap.
Thanks & Regards,
Madhu.G

Hi,
This is based on my understanding of your issue.
There is difference in cancelling material document and reversing material document.
If say, 101 is posted and inspection lot is created and for some reason this is cancelled( by 102).
In case we again cancel 102 , then system will post 101 but inspection lot will not be generated because it's not standard posting and there will be delink in 101 & 102.
So to make your report robust, include logic to capture both cancelled and reverse document.
And also educate users to follow a standard sequence of steps .

Difference between MIGO/261 and MB1A

Hi, guys, how to have MIGO/261 get the same function like 'Suggest Zero lines' checkbox in MB1A?
I need to overissue some material to a production order whick has been goods-issued completely with MIGO/261...but the fully issued material lines weren't there...
Thanks.

Hi,
To post additional issue of material (Unplanned consumption) in MIGO, instead of selecting Goods Issue > Order, select Goods Issue > Others and specify Movement type "261". Then enter material, quantity, etc.. manually and Enter "Order No" under "Account Assignment" Tab and Post it.
It will load the cost on Order. And also you can see these material docs in "Documented Goods Movements" in Production Order.

Enhancement Pack Upgrade and Portal Implications

Hello Everyone,
We are currently on EHP 4 and running EP/Portal 7.00 SP30 and are planning to upgrade to EHP 6. Is there a need to upgrade EP when upgrading the SAP landscape to EHP 6?
We are treating the EHP 6 upgrade as a technical upgrade. Thus the existing ESS/MSS functionality that we have will remain as Java Web Dynpros. We are also not planning on implementing HR Renewal with the upgrade.
Thank you for the help.
Best Regards,
Scott

Hi Scott,
You wont be having any issues if the SP Level of you EP/Portal 7.00 is 30.
Please check the note 1496212.
According to the note if your SP level is less than 18 then you have to upgrade it to 30.
Your ESS/MSS business Packages will remain the same and for HR Renewal you can deploy its latest Businesspackage.
We had a similar situation and now, we have successfully implemented latest ESS (in WebDynpro ABAP) and MSS (MSS ADDON) in our old portal 7.00 SP 27 (Backend Upgraded to ECC6 EHP 6)
Regards,
Suman

Hit with Virus that executed via PowerShell Scripting. Can I disable Powershell on my network via Group Policy and what implications does that have for me.

Our network was hit recently with virus previously unknown, O97M.Crigent. It is a nasty Macro virus that targets Microsoft Office Documents & Spreadsheets and uses a combination of Macros and Scripts via Powershell.
How do I disable PowerShell scripting via Group Policy?
Will this raise any issues such as random application or network failures or other issues?
Can I apply it to the entire domain or should I be selective and only apply it to the workstations?
Network Summary: Windows 2008 Active Directoy Server, 75% Windows 7, 25% Windows XP workstations.
DouglasOfSanMarcos

Disabling Windows PowerShell can be done with GPO:
Computer Configuration | Administrative Templates | Windows Components | Windows PowerShell
From GPO Description: "This setting exists under both "Computer Configuration" and "User Configuration" in the group policy editor. The "Computer Configuration" has precedence over "User Configuration."
By default this option is restricted any way on computers.
I would be very selective when apply it at all:
Workstations - I would apply to test group of workstations first, just to see that there are no side effects before applying to all computers.
Server - I wouldn't apply it at all. I have seen too many issues when setting this policy on Exchange and other systems.
If you are using a Group Policy to define a PowerShell logon, logoff or computer script, that script will disregard any execution policy set locally or through a GPO.
http://4sysops.com/archives/set-powershell-execution-policy-with-group-policy/
http://technet.microsoft.com/en-us/library/hh849812.aspx
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

How can we see Last Date and last quantities in Bex Analyzer ?

Hı BW Gurus,
I have a query that shows consumption quantities for a material regarding to a date interval. On initial screen i specify a material and a date interval ( 01.04.2007 - 15.04.2007 for example). Then query brings total consumptions(261 and 601 movement types) for materials. I set up the query according to stock cube.
But my client wants the last consumptions (last 601 and last 261) quantities and dates in a different columns. When we include calendar day it can be seen easily all the lines day by day. But we dont want to include calendar day. Thus for one material only one row will be exist. Report template will be like that:
On initial screen we defined april 2007 , Output:
Material         Total consump. quantity     Last Consump. Quant.   Last.Cons.Date
XYZ                         457                                 76                        18.04.2007
PS: 76 is included in 457.
How can we achieve this result?
Thank you all indeed
Evren Temiz
Message was edited by:
        Evren Temiz

Hi Evren,
What do you mean?
Regards.

I bought my 15" macbook pro i7 just a year ago and my battery life runs out extremely quick..at fully charged it says I only have 2:27 of usage time. I didn't pay for that-what can I do about it? I do have Apple care. Thanks.

I bought my 15" macbook pro just a year ago and my battery life runs out extremely quickly. This started maybe a month or two ago. Its hard to tell. I only noticed the rapid change recently. Fully charged it says I have 2:27 (2 hours and 27 minutes) of usage time...with about 50% screen and keyboard brightness.
I've checked inside system preferences and its cycle count is 261 and full charging cap is 6316.
I have apple care...is this something i can/need to take up with apple. You'd think if you pay the price for these machines you should get mroe use out of them.
ONLY A YEAR I'VE HAD THIS!
My PC lasted 4 years before the battery showed signs this dramatic of wear.
Any help is appreciated, im new mac owner. thanks.

do you have a mbp with dual video cards? running the system with the higher end card increases the heat and also drains batt power.
i have the 1st gen unibody (2008) with an original removable battery of 311 cycles and 4453 charge. under normal use ill be happy to get 1.5hrs. the mac battery counter thing says i have 3.3hrs though (whatever). compared to me, i think you use your battery more than i do, perhaps its the reason why it degraded so fast in a year?

11g (11.1.1.4) ADF and OPA

Hi,
I am using JDeveloper/WLS 11g (11.1.1.4). I have also installed downloaded the latest OPA modeling and server (Oracle Policy Automation 10.2.0 modeling and runtime).
I then went ahead and installed the determinations-server.war in 11g (embedded in JDeveloper) after modifying the ‘application.properties’ to include the following
load.rulebase.from.claspath=true
rulebase.path=rulebases
I was able to test the http://localhost:7101/web-determinations/ URL
I was also able to create a basic rule form the modeler and run it against the "Oracle Web determinations" from the tool (instead of the "Oracle Determinations Server").
My questions are as follows.
Q1. Deployment of Rules with Fusion: I would like my business users to be able to create rules and test them against a test WLS server preferably the Weblogic server that hosts my web-determinations. In this regard, i would like to know how i can configure the OPM tool to deploy/test against Weblogic. In other words, should i set specific values to Tools->Options->Rule based development->Embedded Server? The only settings i see are for Tomcat, but i am assumign i can put something similar to weblogic. Any sample will be appreciated.
Note that i do understand the issue about rulebase.path directory. In other words, i can either
a) explode deploy the determinations-server.war , or
b) add a director that will contains my rules to the weblogic class path, or
c) use something like -Ddeterminations.server.rulebase.dir=/some/other/dir/rulebases in my startWeblogic.cmd
Q2. OPA with ADF Example: Can anyone point me to a working example of OPA that has been integrated with ADF 11g. In other words, i am looking for an end-to-end scenario where i can develop my business rules in OPA and use them in an ADF application. It would be better if the example uses some values of the business rules that reside in a database.
Q3. OPA versus OBR: Can someone articulate lucidly the use cases when someone would chose OBR (Business Rules in ADF) versus OPA (the haley product), and the implications on ADF development.
Thanks very much,

1. In the current version, OPM doesn't directly deploy to anything other than local TomCat. You'll need to manually refresh your WebLogic environment with the latest rulebase.
2. I'm not aware of an ADF sample. I assume your goal is to host Web Determinations interviews in an ADF UI?
3. You should use OPA instead of OBR if you need any of the following:
a) Rules in natural language in any of the supported OPA languages (English, Chinese, French, Spanish, Portuguese, etc....)
b) Rules in Word/Excel document format that can be easily shared with business users
c) Interactive interviews for guided decision making, where questions can be automatically generated from rules, and screens are shown only as needed to make progress towards an answer
d) Detailed decision reports of which rules and data were used to reach a decision
e) Productized integration with Siebel or SAP
f) Rich test case development and regression testing capabilities
More generally OPA is very good at determinations. I.e. reaching the one right decision given a set of input data. It is not a good fit for optimization problems where the goal is to seek the best outcome given a series of constraints. It is also good at taking a large set of law/policy documents are managing them as interconnected rules. It is possible to efficiently manage thousands of pages of material as an OPM project.
For ADF development, anywhere you have a process that involves a complex decision step, or a calculation that depends on complicated rules that may change frequently or need good business visibility, OPA is a good choice.
Davin.

MB_CREATE_GOODS_MOVEMENT - GI with reference to a reservation; Movement 261

I have data coming inbound in EDI 944. This data is supposed to come and post as a good's issue and creating a material doc. number in the process. The reservation number and reservation item number field in my IDOC are blank. So, I fill them up in a user exit - EXIT_SAPLLMDE_002 after quering RESB table with my production #,material and plant combination. An IDOC is created. But the reservation # that i filled in the user exit is still blank.Also in MB51, the reservation tab shows up as blank . But there are entries for reservation in MSEG table for the material document number just created. I am trying to make this work for only movement types 261 and 262. Here is the code of my user exit..
***   INCLUDE ZXLIDU10
***"*"Globale Schnittstelle:
***"       IMPORTING
***"             VALUE(I_IDOC_CONTROL) LIKE EDIDC STRUCTURE EDIDC
***"             VALUE(X_XALLR) LIKE RLREO-XFELD
***"             VALUE(X_XALLP) LIKE RLREO-XFELD
***"             VALUE(X_TCODE) LIKE SY-TCODE
***"             VALUE(X_IMKPF) LIKE IMKPF STRUCTURE IMKPF
***"       EXPORTING
***"             VALUE(X_XALLR) LIKE RLREO-XFELD
***"             VALUE(X_XALLP) LIKE RLREO-XFELD
***"             VALUE(X_TCODE) LIKE SY-TCODE
***"             VALUE(X_IMKPF) LIKE IMKPF STRUCTURE IMKPF
***"       TABLES
***"              T_IMSEG STRUCTURE IMSEG
***"              T_IDOC_DATA STRUCTURE EDIDD
*Capture Reservation Number & Qty record related to Prod. Ord.
*Component
*for Movement type 261/262.
DATA:   BEGIN OF e1mbxyh. "Goods movements for mobile data entry
        INCLUDE STRUCTURE e1mbxyh.
DATA END OF e1mbxyh.
DATA:   BEGIN OF e1mbxyi.   "Add goods mvment from external systm:
        INCLUDE STRUCTURE e1mbxyi.
DATA END OF e1mbxyi.
tables : resb .
clear e1mbxyi.
*T_IMSEG-WENUM = X_IMKPF-XABLN.
check i_idoc_control-mestyp eq 'ZMMBXY'.
check i_idoc_control-idoctp eq 'WMMBID01'.
check i_idoc_control-direct eq '2'.
loop at t_idoc_data.
case t_idoc_data-segnam.
    when 'E1MBXYI'.
      e1mbxyi = t_idoc_data-sdata.
      if e1mbxyi-bwart eq '261' or e1mbxyi-bwart eq '262'.
        clear resb.
        select single rsnum rspos bdmng from resb into (resb-rsnum,
      resb-rspos,resb-bdmng) where matnr eq e1mbxyi-matnr and aufnr eq e1mbxyi-aufnr
      and
        werks eq e1mbxyi-werks .
        if sy-subrc eq 0 and e1mbxyi-bwart eq '261'.
          e1mbxyi-rsnum = resb-rsnum.
          e1mbxyi-rspos = resb-rspos.
        loop at t_imseg.
*          clear t_imseg.
          t_imseg-rsnum = resb-rsnum.
          t_imseg-rspos = resb-rspos.
          t_imseg-xrere = 'X'.               "Read this in some OSS note that I need to have it as X
          modify t_imseg .
        endloop.
        endif.
        if sy-subrc eq 0 and e1mbxyi-bwart eq '262'.
          e1mbxyi-rsnum = resb-rsnum.
          e1mbxyi-rspos = resb-rspos.
          e1mbxyi-bdmng = e1mbxyi-erfmg.
          e1mbxyi-enmng = e1mbxyi-erfmg.
        endif.
        t_idoc_data-sdata = e1mbxyi.
        modify t_idoc_data.
      endif.
endcase.
endloop.
After it comes out of the user exit, in SAP it passes through the FM MB_CREATE_GOODS_MOVEMENT, thats where the real Goods movement takes place..
Any idea guys why the newly generated IDOC doesn't have reservation number and item field filled ?

Hello Shareen
I am not really sure where the problem might be yet I would like to suggest some improvements to your coding.
DATA: ls_edidd    TYPE edidd. " I do not work anymore with header lines but exclusively with work areas
DATA: ld_idx        TYPE i.
loop at t_idoc_data INTO ls_edidd
                            WHERE ( segnam = 'E1MBXYI' ).
ld_idx = syst-tabix.
      e1mbxyi = ls_edidd-sdata.
      CHECK ( e1mbxyi-bwart eq '261' or e1mbxyi-bwart eq '262' ).
        clear resb.
        select single rsnum rspos bdmng from resb into (resb-rsnum,
      resb-rspos,resb-bdmng) where matnr eq e1mbxyi-matnr and aufnr eq e1mbxyi-aufnr
      and
        werks eq e1mbxyi-werks .
       LOG-POINT <name of checkpoint group>
         FIELDS e1mbxyi-matnr e1mbxyi-aufnr e1mbxyi-werks
                     syst-subrc resb.
       CHECK ( syst-subrc = 0 ).
        CASE e1mbxyi-bwart.
          WHEN '261'.
          e1mbxyi-rsnum = resb-rsnum.
          e1mbxyi-rspos = resb-rspos.
        loop at t_imseg.
*          clear t_imseg.
          t_imseg-rsnum = resb-rsnum.
          t_imseg-rspos = resb-rspos.
          t_imseg-xrere = 'X'.               "Read this in some OSS note that I need to have it as X
          modify t_imseg.
        endloop.
        WHEN '262'.
          e1mbxyi-rsnum = resb-rsnum.
          e1mbxyi-rspos = resb-rspos.
          e1mbxyi-bdmng = e1mbxyi-erfmg.
          e1mbxyi-enmng = e1mbxyi-erfmg.
        WHEN OTHERS.
          CONTINUE.
        ENDCASE.
        ls_edidd-sdata = e1mbxyi.
        modify t_idoc_data FROM ls_edidd INDEX ld_idx.
endloop.
If you have checkpoint groups available on your SAP release then I would use them to support debugging.
Regards
Uwe

261 and 914 implications

Similar Messages

Maybe you are looking for