2610 Grid but no LIST option
Hi,
I am trying to set up a 2610 phone (ATT GO phone) for my wife who needs a VERY SIMPLE interface. I would prefer the main menu be shown in LIST view instead of GRID but it appears that the phone only gives me the GRID option with no way to change it. Is this a function of what AT&T enables for this phone? Also would be nice if I could get rid of all the applications on the main menu that she'll never use (such as games, email, messaging, etc.) since she will only use this as a TELEPHONE!!
Unless the feature has been removed from the AT&T version of the software, then from the main screen you select Options> Main menu view> List.
The 2610 is a very simple phone, and does not offer a way to customise menus.
Similar Messages
-
I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?
Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry -
I am running OS X 10.9
but when trying to list an item to sell on ebay it say= Sorry. Your browser doesn't support the popular listing options selling form. If you'd like to try it, please try using Internet Explorer 6 or higher, or Firefox 1.5 or higher.
Help please so I can continue my sad lifeTried to see if it is looking for flash and it is disabled or not installed by default; java (not being installed and best to turn it off normally), browser agent to report it as something else.
Opera comes the closest I've read to spoofing a site telling it is IE but you have to do so per site. Also OmniWeb. -
In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field. In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view. What am I missing?
Thanks for chipping in. I discovered something after trying what you suggested. I have quite a few collections of hits by year from Time Life and Billboard. I've eliminated duplicate tracks that appear in both collections (or other CDs for that matter), but cross-reference the CD where I deleted the track and placed in in the comments section of the CD track I retained. If I "search" by song name, only the remaining track appears. But if I want to hear for example Classic Rock 1964, only those tracks remaining would be there when I pull up that CD. So, I type "Classic Rock 1964," in the search field. First the boxes on the right of the screen open up showing album icons. Showing four tracks by album with a button to view 10 more, then four songs with an option to vies 18 more. I finally noticed that at the top of the boxes is a blue band that reads, :Show Classic Rock 1964 in Music. When I double click on this blue band, all 24 tracks from the original CD appear in the song list format even though I had deleted two of them because they appeard in a Beach Boys CD. On those tracks, I had referenced Classic Rock 1964 in the comments field. So, bottom line, Search will also look in the comments field if you click "filter by all" in the magnifying glass to the left of the search field. And you can move all tracks that if finds into a song list by double clicking on the blue band.
-
ITunes does not detect my iTouch, but its listed as a camera in my computer
iTunes does not recognize my iTouch when its connected, but its listed in "my computer" as a digital camera. I've tried all of the support options lusted here: http://support.apple.com/kb/TS1363?viewlocale=en_US
but they arent working. This is the diagnostics report I'm getting from iTunes. Oh, and the Apple Mobdile Devise Support software won't uninstall either:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
BIOSTAR Group TA890FXE
iTunes 10.5.2.11
QuickTime 7.7.1
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 00C9B11C03813F40
Current user is an administrator.
The current local date and time is 2011-12-12 23:24:33.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., AMD Radeon HD 6900 Series
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 (x64) is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.What computer OS are you using. Here are links for iTunes not recognizing the iPhone in different OS.
Apple: http://support.apple.com/kb/TS1591
Windows: http://support.apple.com/kb/TS1538 -
Placing string item as a list option
hi forum users i want to place the string item code which retrives server info as a list option but i do not know how to go abt it can anyone help thanks .
/*if (infopool.containsKey("ServerInfo")) {//server info
res.removeCommand(Contents.ok);
infopool.remove("ServerInfo");
if (Datas.server_services.size() > 0) {
res.append(new util.CustomStringItem("Server Services:", res.getWidth()));
Vector serv = Datas.server_services;
for (int k=0;k<serv.size();k++) {
String lab = ((StringItem)serv.elementAt(k)).getLabel();
String name = ((StringItem)serv.elementAt(k)).getText();
res.append(new StringItem(lab+" ",name));
else
res.append(new StringItem("Server Info", " not available"));
else{*/
thank you .hi forum users i want to place the string item code which retrives server info as a list option but i do not know how to go abt it can anyone help thanks .
/*if (infopool.containsKey("ServerInfo")) {//server info
res.removeCommand(Contents.ok);
infopool.remove("ServerInfo");
if (Datas.server_services.size() > 0) {
res.append(new util.CustomStringItem("Server Services:", res.getWidth()));
Vector serv = Datas.server_services;
for (int k=0;k<serv.size();k++) {
String lab = ((StringItem)serv.elementAt(k)).getLabel();
String name = ((StringItem)serv.elementAt(k)).getText();
res.append(new StringItem(lab+" ",name));
else
res.append(new StringItem("Server Info", " not available"));
else{*/
thank you . -
Attachment list option from the GOS
Hi freinds
We have a custom Transaction for which we have activated the GOS icon on the screen. We have that icon and we care able to save the document to the Content repository fine.
The issue is immediately after attaching the documents, if you use the
" Attachment list" option from the GOS menu, it brings the attached documents.
But if you leave the transaction and get in for the same document, the same function is not working.
In what basis i have to save the document...
Kindly pl throw in your ideas on this issue.
Thanks
devaHi Kruthika,
Here iam explaining how i resolved in my case
i created a database table with the selection screen values
if i attach any document in the GOS menu than keep a save button and write logic for save button to save the selection screen values in database table
than after that if u see tha attachments again give another button like GET if u give any value which is in database tabel than press get it will get the all selcetion screen values and the attachmentts
Note:Just iam explained what i did but i dont know what is ur requirement exactly
if u come with ur requiremnt than we will help u
Thanks
Surendra -
How to filter a report by a predefined but reduceable list of words?
I am trying to filter a report by several different input values.
I want to be able to search by date, site, multiple regions (DEV_KEYS), multiple alarm types (ALM_TEXT) and omit entries containing a predefined, but reduceable, list of words (the E#s).
I want the E# variables to be a list with default values (eg. Alarm, Hi, Lo, Standby) but I want to be able to filter by any combination of these. I was thinking of using checkboxes so that I can tick or untick the words to filter depending on what search I'm doing, but I am unsure how to use them like this. At this point I have them in a textbox each and the search will omit the entires when the text is there - what I want. If I delete the word and click Go the search brings back no results. However if I enter some obscure string (eg i5wqii) the word that I replaced will no longer be omitted - what I want. I don't want the user to have to enter something random into a text box to not search for a word.
eg filter by all
+ Alarm
+ Hi
+ Lo
+ Standby
eg filter by Hi 'only'
- Alarm
+ Hi
- Lo
- Standby
Is it possible to do what I am trying to do? Any help appreciated.
Current SQL for Report:
select * from
select DATE, MICROSEC, DEV_KEY, ALM_TEXT
from ALARMS@dblink
where DATE >= :P17_DATEFROM
and DATE < :P17_DATETO
and DEV_KEY like :P17_SITE||'%'
and DEV_KEY like '%'||:P17_DK1||'%'
and DEV_KEY like '%'||:P17_DK2||'%'
and DEV_KEY like '%'||:P17_DK3||'%'
and ALM_TEXT like '%'||:P17_AI1||'%'
and ALM_TEXT like '%'||:P17_AI2||'%'
and ALM_TEXT not like '%'||:P17_E1||'%'
and ALM_TEXT not like '%'||:P17_E2||'%'
and ALM_TEXT not like '%'||:P17_E3||'%'
and ALM_TEXT not like '%'||:P17_E4||'%'
and ALM_TEXT not like '%'||:P17_E5||'%'
and ALM_TEXT not like '%'||:P17_E6||'%'
)figured out a way to do it. Put each of Alarm, Hi, Lo and Standby in their own select list with the other option as '-----' with output value as some string that will never appear in the field.
If anyone knows how to do it with checkboxes though i'm all ears. -
I am trying to sync my ipod shuffle to the itunes on my computer. When I try to sync I go to the drop down file tab. PULL up "devices" But the extended options of SYNC, RESTORE, Transfer and Backup won't allow me to click on them. How do I activate?
Those menu bar commands are disabled when you do not have a device (your shuffle) selected in iTunes.
If the iTunes sidebar (along left side of iTunes) is hidden, from the menu bar, under View, select Show Sidebar. In the sidebar, your shuffle should be listed under DEVICES. Click on it there to select it. Now, those commands under the File menu should be accessible.
However, once you have the shuffle selected, many of those "device-related" commands in the menu bar are also on the iTunes window. For example, there is a Sync button at the low-right corner of the window, which does the same thing as the command in the menu bar. -
Bluetooth MAP SMS works in my vehicle but "reply" & "call" options grayed out
I have an iPhone 4S updated to the IOS 6. I have a 2012 Honda CRV that supports bluetooth SMS. The phone paired with the vehicle and phone calls work, streaming audio works and even SMS works. The vehicle does read the SMS messages well, but the options to "reply" or "call" are grayed out so it's not an option. But, I've noticed that when I get a text message from someone not in my contact list the vehicle system will read the text like normal but now the option for "reply" and "call" IS available. So when I get a text from someone in my contacts the vehicle can only read it but when I get a text message from someone not in my contacts the vehicle can read, reply, or call. Is this something with the bluetooth profile? It seems like something that can be fixed with a software update. Anyone have some insight?
My question doesn't not need to be taken as a question about the vehicle specifically. Yes I have this question up in Acura forums as well. I am looking to see if others with an iPhone 5 or iOS 6 have tried their MAP protocol on anything basically and wondering the results of their tries.
To recall my question: Does iOS 6 have MAP Protocol for SMS read back and reply in my vehicle? & On iOS 5 this was not supported but I have read that now it is. Has anyone tried this function? -
Open tabbed panels from dropdown list option value
I have about 10 tabbed panels on my page.
I created a dropdown list, <option value></option value>.
I need to open the specific panel when an option is selected from the dropdown list. I know how to open tabbed panels by URL, a button, and a link on the same page. But how do i open a tabbed panel from a dropdown list. The <option value> in IE does not allow for onclick events in IE.Yes and I have been trying to find that. Right now I have it setup where the onchange event is "location = this.options[this.selectedIndex].value;">
and then I have each<option> in the dropdown list with teh value=http://URL.com?tab=3#tabbedpanels1.
It works but it isn't as dynamic as I would like. When i select each option in the dropdown, it refreshes the page and opens the correct tabbed panel. Then the dropdown list is reset to the default value because the page refreshed. I wanted to do this without the page refreshing, that way the dropdown list item remains at what I selected to open the tabbedpanel. and plus, I didn't want the page to refresh everytime but to just open the tabbedpanel the same way as if i made a button to open it. -
Creating ASM after installing grid infrastructure software only option
OS environment is Solaris 10 sparc (64 bit) with suncluster 3.2. Oracle version is 11.2.0.3.0... ASM configuration also..
Grid binaries (i.e. GRID_HOME) will be placed in local disk on both the nodes. Oracle Binaries (ORACLE_HOME) also will be placed in local disk on both the nodes..Oracle database only will be placed in shared storage with ASM...
My doubt is If i select "install grid infrastructure software only" option, can i create separate ASM instance on each node by using "$GRID_HOME/dbs/initSID.ora" file of each node?
Is it possible to create two ASM instance in the clustered environment since Single instance Oracle ASM is not supported with Oracle 11g release 2 as per "Oracle® Solaris Cluster Data Service for Oracle Guide"?
Please tell me the suggestion if anyone knows........
Thanks & Regards
Ramesh MHi,
First of all "software only installation" only places the binaries onto the local disks. This software only binaries later have to be configured either for GI Standalone Server or GI for Cluster environment. It differs in the root.sh script to be called, and in the need to use config.sh to configure the cluster environment.
So by configuring standalone server GI later, you will only have a local ASM installation.
However you will not end up with a initSID.ora file for the ASM instance, since the spfile of the ASM instance will always be placed inside the first ASM diskgroup to be configured. (the same for GI cluster, as for GI SI).
Now creating clustered ASM and SI ASM => you can only create clustered ASM for nodes which participate in the same cluster. So if you configured both nodes with clustered GI, but did not tell them to be 1 cluster, but 2, then both ASM instances will be separate. Resulting in beeing ASM1 instance on both nodes, and not able to mount the same diskgroup (consistent of the same disks) on both servers at the same time. So in the end having 2 clusteres consisting of one node each, does not really differ much from the ASM point of view, other than having ASM1 as instance name instead of +ASM (in GI SI). The difference is in the cluster stack below ASM, which simply has more processes and requirement for the clustered GI version.
And last but not least, yes you can have separate ASM instances on 2 separate nodes. If they are not part of the same cluster, the ASM instances are independent.
They are not really single instances, since they know that they are RAC ASMs, however they do not communicate with other nodes. However you may only have one ASM instance on each host (either physical or virtual host, as you can have an ASM instance in each solaris container).
Hope that clarifies it.
Regards
Sebastian -
On macbook pro - I cannot print from the iphot library as it says I need to select a theme from print options, but the print options will not appear after selecting print
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
How to display grid lines in list view please help
Hello,
What should I do if I would like do display grid lines in list view. I've read related topics but I stil don't know how to do it. I use Sharepoint Designer. Please help
RegardsHi,
You need to modify default XSLT of listview webpart. Open your page in designer and use below jquery.
<!–ADJUST TABLE COLUMN WIDTH–>
<script src=”http://ajax.googleapis.com/ajax/libs/jquery/1.2.6/jquery.min.js“></script>
<script>
$(function(){
$(“tr.ms-viewheadertr th:contains(‘Title’)”, “#MSO_ContentTable”).css(“width”, “50px”);
$(“tr.ms-viewheadertr th:contains(‘Assigned To’)”, “#MSO_ContentTable”).css(“width”, “300px”);
</script>
Check this for more info about steps:
http://jshidell.com/2010/09/19/adjusting-sharepoint-list-columns-using-jquery/
You can also look into this MSDN article for more customization:
http://msdn.microsoft.com/en-us/library/ff630941.aspx#odc_sp14_qn_UsingSharePointDesigner2010WorkwithWebParts_CreateXSLTListViewWebPart.
Hope it could help
Cheers, Hemendra-MCTS "Yesterday is just a memory,Tomorrow we may never see" -
My wish list option is gone. How can I get it back?
My wish list option is gone from original listings (on home computer). If I save it to my watch list I can then move it after the fact, but when I am on a public computer, it is right there in the grey box with the price. How can I get it back on to my home computer again?
Try to restart your phone by holding sown the sleep button until you get the power off slider on your screen. Let it shut down and then restart it by pushing and holding the sleep button again until the apple appears. If that doesn't work try syncing to iTunes.
And try to follow this article of how to recover deleted files from iPhone to have a try, which had help me retrieve my deleted photos back.
Maybe you are looking for
-
ITunes or Quicktime will not install
I have looked at other topics related to the problems i am having about installing iTunes and quicktime. Nothing seems to work. I have completely uninstalled everything i could find regarding itunes and quicktime. Then attempted to reinstall them. I
-
Grey start-up screen with status bar freezing and shutting down
Hello I have a 13.1 MBP running 10.8.1 that is about 18 months old and when starting it up, it makes the traditional apple "ding" and then starts up with the little spinning wheel. Then the status bar appears reminicent of when you install a firmware
-
Page templates with predefined regions
Is it possible to create a page template with two predefined regions ? Much as createing a "page with components". This to be able to edit the regions after creating the page peråge
-
Hi, my c7 front camera does not working it shows an error report "Unexpected error occurred. Please restart the camera. If this does not help, try restarting the phone." i don't know why is this happening but i think it occurs after symbian belle upd
-
Eliminating Download tab in gallery view window
Is there a way to prevent people from downloading photos? I am building a site for my photography business and I didn't choose sharing option. I found no way to download the photos until I saw the download button in the secondary navigation bar when