27: iMac Apple Mini DisplayPort to DVI adapter quits working post-firmware

I iMac Apple Mini DisplayPort to DVI adapter suddenly quit working after I installed Apple's latest iMac display firmware update. This is an Intel Core i5; the monitor is an LG Flatron 24" Wide, and when it powers up it says "no video input" and goes into power-saving mode. No amount of replugging cables helps, but the monitor works fine on other computers.
The Displays control panel just shows one monitor, and clicking Detect Displays does nothing.
I suspect Apple's Display Firmware Update. My installer log shows the following, but the problem only happened today after the latest update:
6/1/10 9:45 AM 27-inch iMac EFI Firmware Update 1.0
6/1/10 9:45 AM 27-inch iMac Display Update 1.0
6/4/10 11:47 AM 27-inch iMac SMC Firmware Update 1.0
6/4/10 11:47 AM 27-inch iMac Display Update 1.0
6/5/10 7:29 AM 27-inch iMac Display Update 1.0
I have automatic updates disabled, but after each update I would see more firmware updates ready, but caution leads me to never install more than one of these at a time, and then to wait a while to see if anything bad happens. The odd thing is that the Display Update 1.0 seems to have been installed three times in this course of events. Alas, there appears to be no way to uninstall a firmware update.
Here is the System Profiler Graphics/Displays output:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Display Connector:
Status: No Display Connected
It says the Mac sees no display connected, and the display gets no video signal. Since the adapter is an active device (it has powered electronics to convert DisplayPort signals to DVI signals) I suppose it could have just coincidentally died. But that seems unlikely given that the thing worked perfectly just before the last firmware update.
Does anybody have similar experience, or better yet, a fix?

Unfortunately the Apple Knowledge Base does not give much information about this update. Such has how to tell if it has been successfully installed. I suspect that because it keeps recurring in the install log that it has not been installed successfully as yet. Are you receiving this update through Software Update? Can you locate the installer for this update? It maybe located in Apps/Utilities.
Some firmware update installations can be interrupted/corrupted by attached devices. If you find the update's installer on your iMac, I suggest that you detach all external devices from the iMac, use an Apple USB keyboard & mouse if available, follow the instructions carefully and install the update manually. If you do not locate the installer I suggest downloading manually from the link below and installing it.
The Knowledge Base article mentions that your iMac should also have a Graphics Firmware Update. I suggest that you download and install that as well.
27-inch iMac Display Firmware Update 1.0
http://support.apple.com/kb/DL998
27-inch iMac Graphics Firmware Update 1.0
http://support.apple.com/kb/DL984
Dah•veed

Similar Messages

  • Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

    Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
    This is a brand new MacBook Pro (15-inch, mid-2012) just received.  I suspect that this is a hardware problem as:
    The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
    The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
    The new MacBook Pro powers an Apple Thunderbolt display without issue.
    Both MacBook Pro's are running OSX Lion 10.7.4.
    The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
    All adapters and components (mini-displayport adapters) are Apple retail adapter.
    I have tried several external monitors, including my Dell U2412m.
    When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode.  Using the "Detect displays" button has no effect, even when used multiple times.  Rebooting does not help, nor does resetting the SMC or PRAM.
    Any other suggestions before I take it to the Genius Bar?

    I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
    I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure.  Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous).  However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
    Hope that htis helps.

  • New iMac 2012 & Mini DisplayPort to DVI-Adapter

    Will this adapter work with the new iMac 2012 (27-inch)?
    (I´m not sure because there are only thunderbolt ports on the picture and no Mini DisplayPort)
    Thank you!
    bye

    Hello,
    A notable peculiarity of Thunderbolt is that it uses exactly the same connector as Mini Display Port, and that's not all. The Thunderbolt connector also carries Mini Display Port video signals. That means you can plug a Mini Display Port video cable/adapter in to a Thunderbolt connector and your monitor will work.
    If you plan to do other things with your Thunderbolt connector and don't want it wasted on a monitor, you can also choose an HDMI --> DVI adapter, which for your purposes will be functionally equivalent.
    You can even use both at the same time.
    - Anonymous
    http://x704.net/bbs/viewtopic.php?f=13&t=6134&p=75115&hilit=mini+display#p75115

  • Mini displayport to dvi adapter not working

    hello,
    I have both a 2008 Mac Pro tower with 2 Apple Cinema Displays, and a newer MacBook Pro that I'd like to hook up to one of the monitors.
    The 2 monitors are both DVI, so I bought a mini displayport adapter to plug into the thunderbold port on the MacBook Pro and the other end to the monitor.
    When I plug it all in, I get no video on the monitor. I am sure the monitor works, I'm sure the cables work (from the monitor), not sure about the adapter (I just bought it, so it could be bad)....
    I did see quite a bit of the same issue online, thought I couldn't find any help in fixing it.... short of driving back to the apple store and replacing the adapter, I'm wondering if there's anything else I should do to trouble shoot this....
    I've restarted the computer, checked all connections, nada....
    help??

    The problem was simple: my laptop wasn't plugged in...
    The desk where the Mac Pro is isn't where I typically use my laptop, so I carried the laptop over and plugged the monitor in, when that didn't work I looked online and checked here- I also returend the original adapter to the apple store. I inquired about it there, and the genius asked if my laptop was plugged in when I tried it out... sooo when I got home I tried it again with the new adapter and with the laptop plugged in, and it worked right off the bat with no trouble shooting or "detect display" necessary...
    The laptop must be plugged in for the external monitor to show up...
    now I know.

  • Mini DisplayPort to DVI Adapter is actually DVI-D? *** Apple!

    I just purchased a new MBP (and I love it), along with an Apple Mini DisplayPort to DVI Adapter. I figured whatever monitor I wanted to plug into, if it was VGA, I could just stick a DVI to VGA adapter on there. Turns out, this adapter only supports DVI-D (digital only). A little fact that Apple fails to mention in their product page.
    What a rip.
    That said, does anyone know of a REAL MDP to DVI-I adapter? Do I need to buy the dual-link adapter?

    I just purchased a new MBP (and I love it), along with an Apple Mini DisplayPort to DVI Adapter. I figured whatever monitor I wanted to plug into, if it was VGA, I could just stick a DVI to VGA adapter on there. Turns out, this adapter only supports DVI-D (digital only). A little fact that Apple fails to mention in their product page.
    They do say that it is for a "digital monitor, ... that includes a DVI connector."
    <http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NTE>
    That said, does anyone know of a REAL MDP to DVI-I adapter?
    No.
    Do I need to buy the dual-link adapter?
    If you are going to use a 30" DVI display. It's still DVI-D (but dual-link). It will also work with single-link DVI displays.
    For a VGA display you need the Mini DisplayPort to VGA adapter
    <http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NDg>

  • Does Mini Displayport to DVI adapter support analog VGA signal?

    I'm just about to buy a macbook pro. Since the MDP (mini displayport) to DVI and MDP to VGA adapters are £20 a pop, I can only afford to get one. Obviously DVI is better in general, but VGA supports more older hardware, CRTs, and the spare VGA input on one of my displays (where the desktop uses the DVI).
    What I'd like to know is does the MDP to DVI adapter also support the analog VGA signal on certain pins (like most physical desktop DVI ports do)? If it does, since I have about 3 or 4 DVI to VGA adapters lying around, I can get the MDP to DVI adapter and use the DVI to VGA adapters with it if necessary, but if it doesn't I might be better off getting the MDP to VGA...

    No. Unlike DVI, which in the DVI-I configuration has both digital and analog pinouts, DisplayPort (and mini-DisplayPort) are purely digital. Mini-DP to DVI then DVI to VGA will not work. If you look carefully at the Apple Mini-DisplayPort to DVI adapter, you'll notice it's a DVI-D connector - digital pins only.
    The Apple mini-DisplayPort to VGA adapter contains a digital-to-analog converter.
    So, you'll have to choose. If you want VGA, get Apple's mini-DisplayPort to VGA adapter.

  • Question about Mini DisplayPort to DVI Adapter

    I want to transfer the display from Dell XPS 15 to Dell ST2220M monitor.
    Purchased a HDMI - DVI cable from ebay and tried using it. The laptop shows the monitor name but the display doesn't get passed onto the monitor. The monitor reads "No DVI-D cable".
    Does anyone know if Apple Mini DisplayPort to DVI Adapter works in my case?

    srikat,
    Welcome to the Apple Discussions. You will have better help from people who read the questions in the laptop section. Check this location and see if you get a better response.
    Check Here
    Jim

  • Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278.  I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

    Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278.  I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
    im not sure what to do next - can anyone help?
    im running OSX 10.7.4

    Hi There,
    I have had the exact same issue but with a projector.
    The issue lies with Mountian Lion 10.8.2.
    I tried many a combination with no luck to get HDMI working.
    Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
    Bought my macbook home and voila, now displaying through my projector.
    There is a small graphics update after 10.8.1 which seems to be the cause.
    Hope this helps.
    Thanks.

  • Mini Displayport to DVI adapter problem

    Using a mini displayport to dvi adapter results in a jumpy mouse and a delay on screen when typing text. I've searched for days, but couldn't find the answer. I am using an iMac 27" i7 8GB and as additional monitor a Philips 220WS.
    Can anybody help me?

    I havent seen the text issue yet but I dont think I tried typing because I use the cpu with two screens for editing and I got frustrated and unplugged the second monitor. Ill try it and get back to you. Thanks for chiming in we need to get a solution to this as its one of the main features for me.
    I wonder if we can call apple with this one as it seems to be a defect.

  • Longer Mini DisplayPort to DVI Adapter too short

    I just ordered a MacBook Pro 15" retina but the  Mini DisplayPort to DVI Adapter that Apple sells seems to be only like maximum 5" only.
    Is there any other reputable brand that sells a longer one (at least 10")?

    Not sure if ill get in trouble for this, and im not associated with this seller in any way apart from buying from them.
    We bought 3 of these for our office and they work very well.
    ps. they are 6ft long
    http://www.ebay.co.uk/itm/6Ft-Thunderbolt-Mini-DisplayPort-to-DVI-Cable-Adapter- For-MacBokk-Pro-Air-iMAC-/300732088573?pt=UK_Computing_CablesConnectors_RL&hash= item46050780fd
    kind regards

  • Trouble with 30" HD Cinema Display using Mini DisplayPort to DVI Adapter

    I bought a new MacBook Pro and I am having trouble getting the full resolution to work with my 30" HD Cinema Display (purchased in 2007 max resolution 2560 x 1600) using a Mini DisplayPort to DVI Adapter.
    According to the specs page, http://support.apple.com/kb/SP581 , the max resolution of the HD external display is supported. Unfortunately the max that I can set it to is: 1280 x 800
    Has anyone else had the same issue?
    If this isn't resolved I'm likely going to exchange my MacBook Pro for one that can support this display.

    So I went and bought the Mini DisplayPort To Dual-Link DVI Adapter as suggested and it seems to work great.
    Now the problem that I have is when I open up Apple's DVD player, the screen is blank but I can still hear audio.
    If I unplug the display, the movie will display properly. Rebooting with the display plugged in doesn't help either. I also deleted all the DVD players enc setting files so that they would re-initialize but no luck.
    Any idea what this problem might be??
    Chipset Model: NVIDIA GeForce GT 330M
    Type: GPU
    Bus: PCIe
    PCIe Lane Width: x16
    VRAM (Total): 512 MB
    Vendor: NVIDIA (0x10de)
    Device ID: 0x0a29
    Revision ID: 0x00a2
    ROM Revision: 3532
    gMux Version: 1.9.22
    Displays:
    Color LCD:
    Resolution: 1920 x 1200
    Pixel Depth: 32-Bit Color (ARGB8888)
    Mirror: Off
    Online: Yes
    Built-In: Yes
    Cinema HD:
    Resolution: 2560 x 1600
    Pixel Depth: 32-Bit Color (ARGB8888)
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Rotation: Supported
    Adapter Type: Mini DisplayPort To Dual-Link DVI Adapter
    Adapter Firmware Version: 1.03

  • Does DVI-to-HDMI work with my Mini DisplayPort to DVI adapter?

    Hi,
    I have a Mini DisplayPort to DVI adapter and was wondering if I get a DVI-to-HDMI, will I be able to get HDMI output?
    If yes, should I get any specific DVI-to-HDMI adapter?
    If yes, will it have sound with it?
    Thanks.

    So which does the community prefer between Dr Bott DVIator and the Apple DVI to ADC?  I have the Apple but it is not working, as it is shutting the monitor down without even starting it (soft shut-down).   Is this a bad adapter or the result of "stacking" adapters?  I have read that it is more common to a bad adapter result.
    Thanks.

  • New Mac Book Shuts Down when I plug in the Mini DisplayPort to DVI Adapter

    I have a new 15" MacBook pro and every time I plug in the Mini DisplayPort to DVI Adapter, it shuts down. I installed the Mini DisplayPort to VGA Firmware Update (http://support.apple.com/kb/dl799) and it still shuts down. It shuts down whether I have a display/projector plugged in or not.
    Any suggestions???

    Try turning the MBP off before you connect or disconnect an external monitor. I could be wrong but I do not believe that the DVI interface was designed to be a hot swap interface.

  • Mini DisplayPort to DVI Adapter does not recognize SGI-Saver on DVI (LCD)

    I bought a Mini DisplayPort to DVI Adapter for my new unibody 17" MacBookPro.
    No dice! The lcd is not recognized, is not seen in the displays control panel, and LCD remains dark. This LCD works fine on the previous generation MacBook Pro when plugging into the DVI connector on that computer.
    The Apple adapter seems not to recognize the DVI lcd panel. What's the fix? A firmware update perhaps?!?

    The adapter works perfectly with a lower resolution Dell LCD panel. I'm hoping that Apple would have a firmware update to enable operation with the older generation LCD.

  • MB570Z/A vs MB570Z/B Mini Displayport to DVI adapter

    Hi all,
    Anybody know the difference between the Mini Displayport to DVI adapter MB570Z/A (older and cheaper) and the MB570Z/B Apple currently sells? The "A" version is available elsewhere for about $7 vs $29 for the "B" adapter available from Apple.
    Thanks!

    I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
    I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure.  Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous).  However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
    Hope that htis helps.

Maybe you are looking for

  • How to call PL/SQL procedure from PERL

    I have a requirement to create a PERL wrapper for few PL/SQL procedure. Can any one tell me how to call the procedures from PERL ? Thanks in advance. ....srini

  • How we modify print program in script

    hi gurus. how we modify print program in script, please tell elaborately.

  • PURCHASE REQUISTION -PR

    In Purchase Requistion how many maximum line items - for a single material  can we post at a time ?

  • Problem in text determination

    Hi all,      I have entered the sales text in XD02 of a particular customer . It get saved when I have saved it. But when I open it again It does not display What I have entered in the  sales text.     My question if there is any prequisites for the 

  • Configuration of NWDI

    Hello Everyone, I am facing extreme problems in configuring NWDI  for my landscapes.. Please guide me how excatly the config. takes place in the server and as well in developer studio i.e., if i develop a local DC how can i do the Check-in..what depl