27" iMac i7, two finger slide funcionality lost after the software update

I have the latest 27" iMac bought on late December.
However, after installing the Apple's official software update, the two finger slide functionality on the Magic mouse got lost. The only remedy appears to be restarting the iMac.
Has anyone experienced the same?

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question. You should post your question in the OS X forums.

Similar Messages

IMac won't boot into OS X after failed software update

I've got a 400MHz G3 iMac here, running 10.4.8. I finally got it connected to our network and ran Software Update, and it downloaded the 10.4.11 update. A few of the other updates installed successfully (iTunes phone driver, Java updates, etc.) but I got an error on the 10.4.11 combined update installation. Rebooted to finish installing the other updates thinking I'd try the 10.4.11 update on its own, and now the iMac refuses to get past the "Welcome to OS X" screen (I get the window with the Apple logo and the progress bar, but the progress bar never moves, even after several minutes). Tried safe boot with no luck.
There are no peripherals connected except the Apple keyboard/mouse (which are connected via a USB extension cable), so I can rule those out. Basically I'm wondering what steps I can take before I have to dig out my Tiger disc and mess around with Disk Utility...
Thanks in advance!

Preexisting corruption is my guess.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions. (Well, the Installer actually uses superuser Permissions to do it's work, but after reboot it doesn't guarantee communication with other existing needed files Permissions.)
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Two finger slide acting up in Word doc

So, here is what happens.
If I am in a word doc, my two finger slide works fine until I click anywhere in the document.
Then, if I try to do the slide, it will not work until I click on the document at least one or two times. The slide works normally again until I type something.
I tried changing some preferences with the mouse and track pad but to no avail.
Any suggestions will be appreciated. Thank you.

You might need to give us just a little more information. Which version of Microsoft Office do you have? 2004? 2008? 2007 running in Windows under Boot Camp? Or maybe 2003 running in Windows under Paralells? Are you actually using Microsoft Word to open your "word doc"? (You didn't actually specify that you were using Microsoft Word.) Or are you using Pages from iWork? Which version of Pages?
Also, which direction are you swiping? Up and down to scroll? Left to right to move around the document? What is that your application stops doing?
-Doug

Does anyone know why the sharpness slide control in the edit facility of iPhoto hasn't worked on any iMac after the iPhoto update near the end of 2011?

Does anyone know why the sharpness slide control in the edit facility of iPhoto hasn't worked on any iMac after the iPhoto update near the end of 2011?

Does anyone know why the sharpness slide control in the edit facility of iPhoto hasn't worked on any iMac after the iPhoto update near the end of 2012 ? (not 2011)

After the last update of itunes I seem to have lost all my music (Cds that I had downloaded into itunes) except the once I had purchased from the itunes store. Can anyone help? Do you know what might have happened?

After the last update of itunes I seem to have lost all the music that I had downloaded from my Cds. It was a lot of music! All I still have is the music that I had purchased in the itunes store. And before you asked. No, I did not have a backup. Never got around to do it.
Does anyone of you have an idea if and how I can maybe get my music back?
Your help is very much appreciated. Would it help if I recover my computer from an earlier date?? I am not even sure if I make sense here.

Hi - I seem to have a similar problem. I was prompted to update to iPhoto 11 yesterday (don't know why yesterday, I'm in iPhoto all the time). So I followed the instructions, library updated, all existing events and albums are there. I uploaded some more pictures and created a few new albums and did some new year spring cleaning, moving stuff around etc. And I started making a calendar.
I've opened it up today, my calendar is still there as are all the new events, but the pictures are empty outlines. If I open up a picture I just get the "!" but I can still see the thumbnails showing in the slider in the bottom - I don't know if that means the source files must still be there somewhere, or if it just means it captured thumbnails yesterday.
I've gone into it via "show package contents" and there just don't seem to be any masters for an upload yesterday. I also just had a look in the last import folder, because of a comment from someone above. As I scrolled down through the folder the images were there and literally disappeared in front of me - by which I mean, the thumbnails were there as I scrolled down and then would turn into empty outlines...!
All my old folders are still there, thankfully (although they're of course the ones that are also all safely back up).
Although I have a timecapsule, my photo library is too big to keep on my hard drive, so I keep it on an external drive - so it only gets backed up when I do it manually (thanks Apple for that, I will never understand why it was designed to work - or not work - that way). So if the pictures have been lost then they are gone for good which is super-frustrating (I just got back from South Korea and was in the middle of sorting out all my shots from that trip). It seems that this can only have happened because of the update - I should have known better than to have pressed yes.
If you have any ideas, I'd be most grateful!
Regards
R

HT1338 The Software Update function on my iMac mid 2007 with OS X 10.8.2 fails to see new software

The Software Update function on my iMac mid 2007 with OS X 10.8.2 fails to see new software ,not with /Apple/Software Update or /About this Mac or /System Preference/Software Update, the problem started already with 10.8 and I had to download the 10.8.2 Combo manualy, installation was succesful, but since iPhoto11 (9.4) is now available my existing iPhoto11 (9.3.2) will not detect updates using AppStore or all the other ways, Any idee is welcome.

Glad you got your Mac fixed. But I hope you realize that an update can always go awry; corrupted download, stray voltage spike in your AC power, even a bug in the Installer of the Update. That's why it's never a good idea to update anything that affects your business for at least a week or even two AFTER the update comes out.
And this applies not just to the OS Update, it may be even more important with an update to one of the apps you need for your business! 8-| There's hardly ever a valid reason to make an Update while working on a clients task. Certainly no reason to make an Update during the work week. That's what Week Ends are for! LOL!
Basic rule for the OS Update, for me, anyway, is to NEVER use the Software Update version. I ALWAYS go to the Apple site and download the Combo Updater. It's often much larger, but it's never failed me. Maybe just that fewer people are hitting that server! Who knows? Who cares?
Second basic rule, WAIT a few weeks to see if there are problems associated with any update. What's the advantage of being the first one on the block with a problem?!
Third basic rule, try the download a second time. Bits/electrons are very slippery! Some have been known to fall out of the Internet "tubes!"

I lost artwork after the latest update?

After the latest update I lost most of my artwork but oddly not all of it. I am now trying to fix the issue and have run into a roadblock: the artwork won't take. I've tried several different approaches to adding the artwork but none of them are showing up on my iPad, though it looks like they are there on my iMac. I manually manage my music so I can't sync the stuff. When I tried deleting an album and replacing it my iTunes freaked out ("preparing to update" and a swirly mouse pointer is all I get.)
How do I fix this issue?
I'm a bit obsessive when it comes to having the artwork boxes filled so this is driving me a bit crazy... ugh.

Okay. You've mentioned an iPad and an iMac and iTunes. So what brings you to the iBook Discussions?
When posting in one of those other discussion areas, it may be helpful to include which version the OS and iTunes you're running on the Mac you're using to sync the iPad.

I have a iPhone 4 s I did the software update ages ago and lost my camera roll then did the update and they all came back then on Christmas eve they have all gone !!

THis is now the 5 th time I have written this !!!
I have a iPhone 4s i did the software update ages ago and lost the camera roll .....then I did the update and all my photos returned ...now on Christmas eve they all dissapeared
I now just albums .... All Photos but that only has 77 photos , and that's it over 1000 photos have just gone ??
PLease help me !!

Why should we care how many times you've written this? Are you making multiple threads? Are they being deleted by the Hosts?
Did you make a backup of your iPhone before you updated the iOS?
Did you import the photos to your computer?
Were the photos in the Camera Roll, Photo Stream or synced iTunes albums?

I have lost some of my bookshelfs after the last update!

I have lost some of my bookshelfs after the last update and cannot create a new one. How can I fix it? I don't have them on my PC so I can't synchronize them. What can I do? Pretty dissapointed right now!

If the contact were added after the backup was made they will not be in the backup. If your contacts were synced with iCloud they may be there. If so they will apear shortly on your new phone.

When I try to install Windows on iMac with Bootcamp I get this message,"Can't install the software because it is not currently available from the Software Update server."

I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.

I have that problem too. There's many other discussion threads as well. Either Apple doesn't realize they have a problem, or they do and simply don't care. Either way, not good.
There is a workaround that I'm going to try next. Go to this webpage:
http://support.apple.com/kb/HT5634
Scroll down to the middle of the webpage. Hit "Expand All". Now, search the webpage for the Apple product name of your computer. It should be something like "MacBook Pro, 17-inch, Early 2008". If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit). Hopefully you'll find a "4" or "5" there. Click on that number, to go to the download page for the drivers that you need. If you just see an empty box there, then you're out of luck....
Hopefully there will be drivers. Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32). Use Disk Utility to format your USB stick if necessary. Now, you have the drivers you should have gotten from the Boot Camp Assistant download. You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
Hope it works!
Josh

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Capacity:|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

After the last update I lost a lot of documents I had edited and saved in my tablet. Any option to recover them? Now I can only access the documents of the cloud.

After the last update I lost a lot of documents I had edited and saved in my tablet. Any option to recover them? Now I can only access the documents of the cloud.

Hi,
Please take a look at one of the following documents to see if it answers your question about finding the files that are locally stored on your device.
For iPads & iPhones
How to manage files in Acrobat DC for iOS
For Android devices
How to open PDFs on Adobe Acrobat DC on Android
Please let us know if you have additional questions.

I have a situation where the administrator password is rejected when attempting a software update. I think this happened because of syncing a iPad to the iMac. How can I reset the Software Update back to the administrator password?

I have a situation where the administrator password is rejected when attempting a software update. I think this happened because of syncing an iPad to the iMac. How can I reset the Software Update back to the administrator password?

You can reset the password with the install disk.

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

Hi jandroantonio,
Welcome to Apple Support Communities.
It sounds like your iPhone update may not have completed succesfully. Not to worry, we have an article with information on how to treat this symptom:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy

27" iMac i7, two finger slide funcionality lost after the software update

Similar Messages

Maybe you are looking for