27' Imac version 10.8.2 webcam doesn't work on any softwares: photo booth, skype, ichat...!
I got the new imac 27 inch 3.2 GHZ last week, the version is 10.8.2. I tried to use photo booth, skype and other softwares for webcam, but none of them work. They just turned black and stopped there. How can I do to test it or it's obviously broken?
Thank you!
If you have not already done so, shut down Mac, restart, and try again. If the iSight still does not work, try all relevant suggestions from Apple's http://support.apple.com/kb/HT2090
(Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
Message was edited by: EZ Jim
Mac OSX 10.8.2
Similar Messages
-
Version cue of adobe CS1 doesn't work on imac intel
how can I setting version cue of adobe cs1 in system preference pane? Like I said that "version cue" of adobe CS1 doesn't work on imac intel.
Thank you.I also had this issue. We will just have to work until Adobe comes out with a universal version of CS.
Hope this helps,
Cory -
I get an "install failed" message. "Recovery system can't be created—click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?
The first time I attempted to install ML was on a late 2011 MBP. It ran for three minutes then gave me the error message: Could not install OSX due to an unexpected error. I was using the original ML install app, not a USB or other drive.
After a couple of restarts wiht the same result I saw a message to the effect that the install was trying to close open apps. I closed apps manually a few times to no avail. I shut down instead of restarting then booted into Safe mode (hold down the shift key when starting) and that did it. The install went smoothly after that.
I since installed ML in two iMacs using a cloned copy of the install app on a USB drive. This time I shut down the computers and booted into Safe Mode first and there were no problems.
I don't know if this issue is the one causing you these problems but it is a simple enough solution to try.
Jay -
Can't seem to get rid of any photos in Photo Stream from my iMac. Following instructions from Apple doesn't work!
You need to update iPhoto. The latest version is 9.4.2.
To do your updates, do the following:
Software Updates
How to do software updates via the apple menu - http://support.apple.com/kb/ht1338. - is a link to Apples article on updating the software on your computer
How to do software updates via the App's store - PH2730 - Mac App Store: Update applications and http://support.apple.com/kb/HT4710.
If you need info on your apple ID -
You can visit the Apple ID Support page - http://www.apple.com/support/appleid/ - to learn more about your Apple ID, or visit the - Apple ID Frequently asked questions page - http://support.apple.com/kb/HE37. -
They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response. What should I do?
Look here
Order product | Platform, language swap -
How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work in CC.
Your key cannot work in CC, it's newer version, and would require a new purchase.
Downlaod CS5 here.
Download CS5 products -
The latest version of Adobe Flash Player doesn't work on my Mac
The latest version of Adobe Flash Player doesn't work on my Mac?
What is the solution?Download and install a version compatible to whatever cat flavor you have on the computer.
http://get.adobe.com/flashplayer/
Maybe Flash 11 is too big and you need to stay on Flash 10.3 -
I have latest version of flash but flash doesn't work in safari!
Why do I have latest version of flash but flash doesn't work in safari!I have flash for mac.Your help will be appreciated.
If you're talking about using Flash on your iPod, you can't. There is no version of Flash that will work on any iOS device. If you're talking about using Flash on your computer, you may want to repost in the correct forum.
-
I have been unable to add an HP Photosmart C4480 printer to my existing printer list using a USB connection. Software seems to be available and thought I had downloaded it, but doesn't work. Any suggestions?
Try deleting the printer, restarting, and trying software update again.
If that doesn't work, you can download the entire HP package here:
http://support.apple.com/kb/DL907 -
My screensaver seems to be freezing and I can't access Safari. I've tried restarting/shutting down and that doesn't work. Any ideas to help?
Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Troubleshooting advice can depend on that information. -
In my iTunes on the iPad I've got 95 things that are stuck and I tried swiping them to delete them but it doesn't work dose any one know how to empty the download tab
Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
Thanks again,
Rob -
Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell.
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here. -
I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?
Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version? -
Java(TM) Platform SE binary doesn't work on any website, on any browser
I'm on Windows 7 Ultimate 32bit, everything's working fine, I always keep my system clean, I also keep the registry as clean as possible, I have a problem from at least a couple of months, so "Java(TM) Platform SE binary" doesn't work on any website, on any browser, it always crash, I tried everything, I mean EVERYTHING! I've uninstalled and re-installed java a thousand of times, completely uninstalled, removed all files, all registry entries, nothing seems to work..I always get the same message..
here's the error signature:
Firma problema:
Nome evento problema: BEX
Nome applicazione: java.exe
Versione applicazione: 7.0.400.43
Timestamp applicazione: 521c3bf2
Nome modulo con errori: ntdll.dll
Versione modulo con errori: 6.1.7600.16385
Timestamp modulo con errori: 4a5bdadb
Offset eccezione: 0001d78d
Codice eccezione: c0000409
Dati eccezione: 00000000
Versione SO: 6.1.7600.2.0.0.256.1
ID impostazioni locali: 1040
Informazioni aggiuntive 1: a091
Ulteriori informazioni 2: a0912fac5db1285ab245a51982c0da6c
Ulteriori informazioni 3: 0ef4
Ulteriori informazioni 4: 0ef461fa84dd27e3340858dc9ed3bcb3
and here's a video (made by me) of the problem: Java(TM) Platform SE binary stopped working - YouTube
can anyone help me find a solution?
ThanksLooks like you have conflict with your java home and you are running 2 different JREs. Keep the latest and try launching EM console again and post the exception if you get any.
Thanks,
Vijay -
Using her PC whilst in VNC mode. Control-Alt-Delete is the request but this doesn't work. Any clues?
Using my iMac, I'm trying to log onto another PC at a remote location whilst in VNC mode. Control-Alt-Delete is the request, but this doesn't work. Any clues??
Thanks, great work... I think that's where I was headed!
Maybe you are looking for
-
User-exit /BADI to change mseg during migo
HI Can someone tell me which user-exit/BADI to be used which lets one change mseg during MIGO. There are some user-exit/BADI during migo but everywhere mseg is an import param. Actually for certain cases I want to change the amount in local currency
-
Why is not updateable the Item of block?
I created a block, Update Allowed of the property of block is Yes, Insert Allowed is No, Locking Mode is Immediate. Set Update Allowed of the property of the item vendor_name is Yes. Compile the form. Open the form , but can not update the item vendo
-
Issues with test-all role and browser security
WLS 10.3.5 I have a deployed application on Linux using a SQLAuthentication and Authorization - all is well here. I have setup all the security (without the test-all role) and I cannot access any of the system. If I put the test-all role in - I can a
-
XSQL arbitrary adhoc query - misleading error
Newbie question: How can I allow arbitrary adhoc queries without getting misleading errors? (I am aware this can be a security hazard) Trying CREATE table test5(tla varchar2(3), description varchar2(80), primary key (tla)) on the following .xsql page
-
Hi guys! Is posible read url parameters from a WD for Java? e.g.: http://server/webdynpro/dispatcher/local/TestApp/TestApp?SAPtestId=1&myVariable=123 Then read value 123 from some code inside WD (controller, view, whatever). Thanks!