27 inch iMac as an external display for Lenovo X1 Carbon

I have a new iMac at home and a new Lenovo X1 Carbon laptop for work.  I want to use the ThinkPad USB 3.0 Dock that was provided with my laptop to connect to my iMac so I can use the bigger display while working at home.  Is this possible and if so what extra hardware or software do I need?
Thanks.

Hello, I don't think you can directly.
Mid 2011s & up need Thunderbolt!???
http://support.apple.com/kb/TS3775
Might try ScreenRecycler...
http://www.screenrecycler.com/ScreenRecycler.html

Similar Messages

  • Using a 27-inch iMac as an external display for my macbook air

    I would like Using a 27-inch iMac as an external display for my mac book air.
    i bought a Mini DisplayPort to Mini DisplayPort cable, it's the Belkin Mini DisplayPort to Mini DisplayPort cable on apple store.
    I connect my imac and mac book air with this cable but the screen of my mac book air don't appear on imac screen.
    where is my error ?

    Morning seal, my experience suggests the latter of your two posts is the correct one. I have a 27" iMac with a mini display port (a 2-year old one, not the newer one with thunderbolt); and a brand new Mac book air with thunderbolt. I connected the two with a Belkin male-male mini display port to mini display port cable, and it works fine - press command f2, and the iMac acts as display for the MBA.
    The irony here is that the folks at the apple store in Paris assured me that this would NOT work, and that I needed to buy a €999 thunderbolt display to connect to my MBA. I thought I'd try anyway, since I had the cable to connect a MacBook pro to the iMac anyway... Glad I did.
    Bottom line: yes, despite all the confusion, the new MacBook air will connect to the minidisplay port of an older iMac 27"; and the cable it needs to do that is the older minidisplay port cable, not the thunderbolt one.

  • 24-inch Mid 2007 as external display for Macbook Pro Retina?

    I'm a video editor looking for a new laptop. Tough decisions, but these facts may help my decision...
    Can I use my 24-inch Mid 2007 as external display for Macbook Pro Retina?
    And if so, would the Macbook be able to access the external hard drives that are connected to the iMac? Or do the external hard drives have to be connected to the Macbook Retina?
    Retina's picture quality is just incredible but compared to Macbook Pro non-retina you sacrifice: disc drive, port options, customization, anti-glare screen. And its more expensive. Arghh

    I would use the retina as the primary screen for the canvas and viewer, while putting the browser and timeline on the iMac.
    Apple won't help here. Unfortunately, they leave they're old products in the dust and wouldn't waste time writing an article about connecting a macbook retina to an '07 iMac.
    Thank you for replying though Ralph. The answer has to be out there somewhere.
    N

  • How do I use my 2011 27" iMac as an external display for a pc?

    I just bought a 27" imac for my home, and was also planning on using it as an external display for my work Dell Laptop running Windows 7.
    The Dell laptop has a displayport output, so I was planning on getting a displayport <-> minidisplayport cable, and using the iMac in target display mode.
    I would simply plug the minidisplay end of the cable into one of the iMac's 2 Thunderbolt ports. Seemed fairly simple.
    Except now it seems from what I have been reading that 2011 iMacs DO NOT WORK in target display mode unless they are connected to another Thunderbolt source. This leads to me two questions.
    1. Can anyone confirm or deny this? If this is true, does that mean I cannot plug my Dell's displayport into the iMac's Thunderbolt port as I described above?
    2. If #1 is true, is there any other option? Are there any adapters that I can use to turn my Dell into a Thunderbolt source for display purposes?
    If I can't resolve this I will have to return the iMac
    Thanks very much.
    David

    David,
    Sorry you can't use the 2011 iMac as an external display to your PC. The feature you are referring to is called Target Display Mode and works on 2009 & 2010 27" iMacs. The 2011 machines use Thunderbolt as you know however they do support external displays that are not Thunderbolt displays. So for example if you wanted 2 displays on the iMac you can easily do that with either Mini Display port to DVI or MDP to VGA or even HDMI. MDP is the same size as Thunderbolt and this will work fine to drive a display, TV or even a projector.
    I'd recommend reading Apple's explanations at Target Display Mode 2009 & 2010 iMacs & Target Display Mode Mid 2011 iMacs.
    Using a Mac as an external display for a Windows machine to me seems like a horrible waste of a Mac. Why not enjoy the iMac and if anything run Windows on it and get rid of the PC?

  • Can I use my imac as an external display for a PC? If so, what cables would I need?

    Can I use my imac (intel 2008) as an external display for a PC (Dell 2002)? If so, what cables would I need?

    No.

  • Is there any way to use a late 2009 21.5 inch iMac as an external screen for an early 2011 MacBook Pro?

    Hi there,
    I'm trying to work out if there is any way that I can use my late 2009 21.5 inch iMac (running OS X 10.6.8; mindisplay port) as an external or second monitor when connected to my early 2011 13" MacBook Pro (OS X 10.6.8; thunderbolt).
    From what I've read online, I gather that I cannot simply connect the two with a minidisplay port to thunderbolt cable, as the iMac does not support target display mode. I know I can 'share screens', but this doesn't give me much of an improvement on size compared to just using my MacBook.
    Are there any other potential work arounds I might have missed? Any suggestions (or even conclusive answers to suggest I'm wasting my time by continuing to think about it!) would be much appreciated.
    Many thanks!

    Sorry but no, you are asking about Target Display Mode and the 2009/2010 21.5" iMacs did not support that, only the 27" iMacs did. You can read up on TDM in Apple's Target Display Mode: Frequently Asked Questions (FAQ)

  • HT3924 Can I use my 27" late 2013 imac as an external display for a gaming console?

    If so, how would I set it up and how much would it cost me?

    No, sorry, you can't. Pre-Thunderbolt iMacs could to this, but with Thunderbolt-equpped iMacs they can only be used as a screen for other Thunderbolt-equipped computers. No company has yet to come up with a converter that works with Thunderbolt Macs. The only way you could get video from a game console into your Mac would be via a video capture device and the inherent lag in such capture would, I think, make most if not all games unplayable.
    Regards.

  • Using imac as external display for my MacBook

    Can I use the new iMac as an external display for my MacBook?

    Here's the >New iMac Spec's and there is only Mini-DVI output port and "NO" input port.

  • Using the IMac 27 only as display for MacBook Pro

    Hello,
    i like to use my iMac 27 only as display for my MacBook Pro.
    I have the connecting cable.
    I must start the iMac, he is booting and then i can plug in the cable to my MacBook. Now i have the second display for using with my MacBook.
    Now my question: Is it possible to use the display without booting the iMac-system?
    Thank you for help!
    Best wishes
    Lutz

    LutzTrabert wrote:
    Now my question: Is it possible to use the display without booting the iMac-system?
    no.
    [_*Using a 27-inch iMac as an external display*_|http://support.apple.com/kb/HT3924]
    JGG

  • IMac as an external display, problem with trackpad/mouse pairing

    Hi,
    I am trying to use the imac as an external display for a macbook air, which is well supported/advertised by apple.
    I can toggle the display easily between the imac and the macookair, the problem I’m having is that I only have one wireless keyboard and one wireless trackpad. As I toggle the display, the paring/unpairing of both trackpad and mouse is a real hastle becuase I have to manually go into bluetooth preferences and adjust the settings for both devices.
    Anyone using the imac as external display with an idea/suggestion how to make this process more friendly?
    Thank in advance for any help.

    I don't think you can.  Wish I had better news.  Target display mode for non-thunderbolt 27" Imacs worked OK.  I have done it myself on a late 2009 iMac.  The new iMacs can only go into target display mode when connected thunderbolt to thunderbolt.  So a new macbook or macbook air can do the trick but your dell can't.  What you can do is remote desktop or VNC to the dell.  Now your dell screen will show up but in a smaller window.

  • Using imac as an external display. is it possible?

    hi. i just bought an macbook. i would like to use my iMac as an external display for my macbook. is this possible?

    ok, its not posibble but let me know if there is a way i could get around it.
    ex. using some wireless software. a way to virtually connect both displays ... i don't know i have seen many different setups. i just don't know how to do them.

  • Using a Mid 2011 iMac as an external display.

    Hello, I was wondering if it would be possible to use my Mid 2011 iMac as a external display for a PC.
    In the interest of gaming I am looking for a new gaming PC and I would really like to use my iMac as the display because I still want to use the iMac.

    Yes, if it's a 27" model.
    Target Display Mode 2011 & Later iMacs
    iMac- How to use your iMac as a Target Display Mode display

  • ??? iMAC 2012 27" used as display for LENOVO THINKPAD T500 ???

    I have a Lenovo Thinkpad T500 (must use for work) and my home computer is a 2012 iMac 27". I would liek to use the iMac as an external display for my thinkpad. I've read everywhere online and haven't found the answer I'm looking for!
    I bought a displayport TO minidisplay port cable (both male ends) and connected the imac + thinkpad. Executing CMD f2(displayport activating function) does nothing though. I've tried fn+CMD+f2 etc..etc..  I've read these cables can go BOTH ways... (but have also read some only go one way?) The thinkpad has a dvi output as well but I was hoping to use this DP/MDP cable to connect the two computers as it seemed more logical than using the old DVI/VGA formats...
    Has anyone got any experience doing this or anything that might help me solve this dilemma.
    Thanks for your time!

    Hi, if it doesn't have a real MiniDisplay Port, I doubt the adapter has what is needed to do it from what I've read.
    ScreenRecycler...
    http://www.screenrecycler.com/ScreenRecycler.html

  • Two External Displays for iMac

    Is it possible to run two external displays off of an iMac? I have a small display running and just was giving an old second display so I was wondering if I could run both at the same time?

    It's a real low-down shame that the HD5750-equipped 27-inch iMac cannot support triple displays.
    All of the HD5750 video cards available for Windows PCs support triple displays (two DVI and one DisplayPort) with the Eyefinity technology that was built into the HD5750's GPU.
    Having one iMac 27-inch flanked by two additional 2560x1440 monitors would be so SWEET.

  • Using iMac (Target Display Mode) as an External Display for MacBook Air

    I have a Mid 2010 iMac with a 2 thunderbolt ports. I now have a brand new MacBook Air (2012 Core i5 1.8GHz with 8GB RAM) with a thunderbolt port. I have a Belkin Mini Displayport Cable to connect the two. I want to use the iMac as an external monitor for the MacBook Air. I cannot seem to get this to work. Can I do this? Do I have the right cable?

    You can do it but you need a thunderbolt cable to connect the two.  Then just hit CMD F2 on the iMac and it will enter Target Display Mode.

Maybe you are looking for