2700 camera standby problem

i have nokia 2700 classic, and it gives me a real headache.. 1st it suddently turn off and when i open it it never open again, even i plug the charger nothing happens, so i remove the battery for 1 week and put it back, i try it again and it comes to life..
now my second problem is the camera when i open the camera its ok, then i exit and open again and it says "camera on standby" i press continue and nothing happend even i restart my fone nothing happend still the same, i never drop the fone or spill water on it but its going crazy... what seen to be the prob?? help!

1st try free up some of the phones memory by deleting unwanted items clear your text messages inbox and sent remove unwanted files such as images and videos ,then try update the software then perform a factory reset the code is 12345,if your still having trouble take it to a nokia care point
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Nokia 3500 classic Camera Standby issue

While opening the camera its showing as camera standby, so how i can solve this issue?

i have the EXACT same problem!!!! i dont know what to do to fix it. i love it otherwise and i dont want to change it cuz i love the keypad and the sleek design and all but the camera quality is even worse than my older vga nokia phone! i want to know if it can be fixed and how. i like this phone and i dont want to change it :s

Nokia 3500 Classic Camera standby mode

Somehow my Nokia 3500 Classic Camera , While opening the camera its showing as camera standby, so how i can solve this issue?
Help me quickly Pleaseeeeeeeeeee
PraveenB

update your phone software by your self connect your phone with data cable to pc on pc suite mode then open nokia software updater the serach and there is a new update click ok yes to update the software during thiz update period do not disconnect the data cable and last your software is completed your phone may be stop working until its start do not disconnect
silvi

X200 standby problem without ultrabase

I have a refurb X200 and just the basic software so far Win XP Pro 32bit. I updated power manager and drivers and patch from the Lenovo site. When I first put it into standby either by closing the lid, Fn F4 or the start menu it goes into standby in about 3 secs. and recovers in the same time when asked to. On the second and subsequent times I try to use standby (after a reboot) it takes about 16mins to reach standby - in the meantime it shows a screen with "preparing for standby" and the system is inaccessible. When it finally goes into standby it can be recovered in the normal 2-3 secs.The only way to gain control while it is going into standby is a hard shut down. Following this I again have one normal standby operation. I note people having standby problems with the ultrabase but I haven't tried this yet.

I would like to share with you that it might be because of software issue.
To diagnose, I would suggest you to please update the Power Manager software and also update the Bios of your notebook from the below mentioned web link.
http://support.lenovo.com/en_US/product-and-parts/default.page
After this, please restart the notebook and check if the issue resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Standby problem - Z60m

In Windows XP, sometimes when I put my Z60m into standby mode, it will not boot back up. It normally will enter the standby state correctly, with the standby light being the only indicator that is lit. After some amount of time (usually between ten to fifteen minutes), the battery light will spontaneously light up. While this light is on as well, there is no way to bring the system out of standby. Sometimes the battery light turns off again, and it is possible to bring the system back, but often it stays lit and I have to do a forced power-off and reboot the system completely. This is a bit frustrating; has anyone else had the same problem? My first thought was something to do with BIOS.

Dear Friend !
Get used to it. It is LENOVO. Their upper-most-class million dollar computers (like my Z61p) worth a piece of **bleep**. It looks perfect. It can give you a wonderfull short-term experience. But when you use it day after day you realise that it is UNSTABLE. I'll never recommend lenovo to anyone. Their support is even more LOL !
---- snitt --- by the way i OF COURSE have the same standby problem. I just dont post it. What for ?
They dont give a **bleep** LENOVO&MS are working on their next top-class systems. PROFIT is what matters these days. Not Quality.
Note from Moderator: Watch your language.
Message Edited by nonny on 04-21-2008 08:27 AM
I recommend reading http://www.suyogdeshpande.net/blog/2006/12/15/lenovo-3000-n100-review/
and watching http://www.youtube.com/watch?v=qCr9oKZVWtM
DONT BUY LENOVO !

Camera Glitching Problem? Help!

I'm fairly new to AE and watched a tutorial on making a nebula thingy. I made it fine and have had no trouble, but for the last 2 days i have spent trying to fix my camera glitching problem. I have to keyframes for my camera, obviousl ythe start and the finish keyframe. But in the keyframes, my nebula thing, keeps glitching back to previous frames. Im not really good at discribing it, so i just screen recorded it so you could see. I have checked countless times to make sure there is no keyframes on anything else, there isn't. I lookoed it up, some say it could be the "boomerang effect" I tried to chhange the keyframes to linear keyframes (as they are at the time of the screen recording), obviously still glitching. I also tried to change the keyframes to "hold keyframes" as another suggested solution, i still get random glitching. So as a final solution, here i am. Not sure if you need to know the stats of my computer, but if you do here they are (iMac late 2012/early 2013, 3.7 Ghz, i7, 8gb of ram, NVIDIA GeForce GTX 680MX 2048 MB). I have also exported the project to a mov file, the glitches are still there. Also, it is supposed to stop abruptly like that at the end.
Here is the link to the screen recorded problem:
http://youtu.be/dmU0YSfI-Es
Also, im using After Effects CS6, Knoll lIght Factory, Trapcode Particular and Trapcode Shine.
Thanks, Hope someone could help.

Turn off GPU mode in Knoll and/or in AE by setting the comp viewer to Final Quality. that's some sort of buffer curruption, most likely hardware related... also make sure you are not having other programs running. Even a simple notification pop-up from a messenger can cause such strange artifacts because it temporarily takes the reigns...
Mylenium

Camera (focus) problem - help?

Duplicate post, please see: Camera (focus) problem - help?
Message was edited by: Admin Moderator

Warranty is valid only in country of original purchase. You have to return
the iPhone to the US for evaluation. Either you return it personally or send
it to a friend/relative/co-worker in the US to take into Apple. Apple will not
accept international shipments for evaluation nor will Apple ship out of the
country after repair/replacement.
Have you tried the standard trouble shooting steps: restart, restore, restore
as new iPhone?

My iphone 5 32 gb has an camera autofocus problem, please help me solve this

my iphone 5 32 gb has an camera autofocus problem, please help me solve this

Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy

I need advice on my camera app problem

Hi...
I have been suffering with this camera app problem for the last month and a half of having my iPhone 4S. What happens is that the camera is either working fine and I am able to use it for a short while before it completely shuts down with a purple screen, which results to a black screen and then one day I heard this funny click noise almost like the shutter in the camera was going off at the back.
Now what I am left with is I can not use my camera at all or I can use it for like 5mins before it has a "melt" down.
I asked for advice about a month ago and was told to restart the phone. Back up my phone and restore my software. Well I have now done that twice and that hasn't made a difference.
My phone is only 5months old and I haven't dropped it or anything because most of the time it's on a table or in my hand bag.
So my service provider that I have my contract with has said that they can send it in for repair or they can send it in for testing and see if they can find the fault and if not then they will replace my phone with the iPhone 5 with a pay in difference.
So help me which option is the better one to go for with this problem???
Because I am a photographer and I love having a camera and if I don't have my camera on my I resort to my iPhone.
So HELP please.

thanks very much, that's worked

"Camera failed" problem

Hi! Can you help me fix my "Camera failed" problem? Thank you

Clear your camera cache.
<<Edited by Verizon Moderator>>

Camera Standby on 6300i

In camera mode if I switch to video then back the screen goes blank and after a short while I am told the camera is in standby. I have looked on the forums and tried `Menu` then `*`. I have even backed up the phone and tried a FW update, the Nokia software says the phone type is not supported. The firmware is v3.41. How can I get the camera back without having to turn off the phone and start up again?
Andy

15-Sep-2008 12:51 AM
athomson wrote:
In camera mode if I switch to video then back the screen goes blank and after a short while I am told the camera is in standby. I have looked on the forums and tried `Menu` then `*`. I have even backed up the phone and tried a FW update, the Nokia software says the phone type is not supported. The firmware is v3.41. How can I get the camera back without having to turn off the phone and start up again?
Andy
It is a firmware problem, if there is no update for the phone, consider sending it to the Nokia Care Centre - maybe it will get it's firmware flashed.
Good luck

T60 - Standby problems with long in activity

Hi All,
Hopfully someone can point me in the right direction with a issue i'm having with one of the T60 Thinkpads.
Here's the run down:
We brought 3 T60's (type 6369-A56) last december (online web sale). 1 of the three is displaying problems when dealing with standby mode. If the laptop goes into standby mode for longer than anywhere between 30mins to 1hr the laptop doesn't resume from standby when you either open the lid of the laptop or use the Fn function key. When either action is taken to bring the laptop out of standby mode the cresent moon LED remains lit, the HDD LED lights up for a breif second and then turns off, the power indicator turns on and say's solid, the screen remains blank at all times. When this happens you can hear/feel the HDD spinning up and doing something and you can also hear the processor fan spin into action as if it were coming out of standby. Having mains power doesn't seem to make a difference with this problem.
I've already spoken to Lenovo support RE this matter and they believe it is a software related problem. I've done some further testing to try and determine that, this is what I've done...
I took a Norton Ghost image of one of the 2 working T60's HDD's (standby works perfectly on the other two laptops) and used that Image to ghost the HDD in the faulty T60, this gave me two Identical laptops (hardware and software). The power scheme for the laptop is as follows, Turn off Display @ 5mins, go into Suspend Mode @ 15mins. I left both laptops alone at exactly 9:05, 5mins later the screens when blank, @ 15mins later both went into standby mode. 45mins after standby mode had kicked in I came back to both laptops and used the Fn key to resume the laptops(at the same time) and the faulty T60 didn't come back from standby and the same symptons as mentioned eariler happened.
After that happen I decied to see what would happen if I switched the HDD's between the laptops (hdd from faulty laptop into the working laptop, hdd from working laptop into faulty laptop). After switching the HDD's over I ran the same tests as above. Again 45mins after standby mode had been active I used the Fn key to resume from standby and the laptop with the hdd from the faulty laptop worked straight off the batt, however the hdd from the working laptop in the faulty laptop displayed the same problems as mentioned above, thus ruling out the software as the cause of the problem.
My question is, knowing all of that, where is the issue likly to be? Is it going to be RAM related or board related?
Is the likley outcome going to be returning it to Lenovo for repair?
Cheers
Chris
Solved!
Go to Solution.

Thanks Cedric,
At the time the tests were done, both were using battery power (levels were as close as ai could get them at the time, but they were around the 85% mark when the first test was carried out), however as mentioned in my OP the problem is still there when using Mains or Battery power.
Hibernation is disabled on both laptops (it was disabled before I created the Ghost HDD Image, I have checked that both still have it disabled)
Just to satisfy your curiosity, the faulty T60 already had the latest BIOS updates installed as apart of some intital testing that I had performed (its running System BIOS version 7IET32WW), however the working laptop was running the previous version. I've since updated that system and both are now running the same version.
Since upgrading the BIOS so that they both match, I decided to Load BIOS defaults (F9) with only 1 change (that change is to the SATA Mode from AHCI to Compatibility) to both machines.
I ran the same tests as before, but this time using mains power and the problem is still present on the original laptop displaying the symptoms. There also seems to be a second issue which is related to this problem, if i shut the laptop down and try to reboot 9 out of 10 times i get the following message:
Windows could not start because the following file is missing or corrupt:
\WINDOWS\SYSTEM32\CONFIG\SYSTEM
You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.
Select 'r' at the first screen to start repair
No sometimes I can restart the machine again and it will boot into WindowsXP, however most times I cannot. And a repair will resolve the issue but not always.
In regards to any BIOS settings, there aint that many options in the bios that deal with power management (nothing that I can see that deal with standby mode), whats the problem you've seen with the hibernate function?
Cheers
Chris

Live! Cam Voice problems

Hi I'm using Windows Vista and I got a few problems about the Live! Cam Voice camera.
First I installed it, with the cable in the computer, then I read the cable shouldn't be in the computer so I uninstalled what was possible uninstalling and deleted the "Creative" directory which contained some files still. But now when I'm trying to install it I'm getting either some kind of "Setup.cpp" error, or I'm getting a "Setup.exe has stopped working". I've tried uninstalling it again but I'm still getting errors. How am I supposed to uninstall all of the installation so I can reinstall?
Also I don't get the manual of installing the Vista driver. It says something like "1. Install the package 2. Go to control>sound and change some options there". I didn't know where I should install it, so I installed it in default path and tried to open the .exe files and none of them were working. Are they supposed to be working?

Ok, I waited one day and now the setup is working, so now I inserted the cam when it told me to. But I still need to install the vista drivers, else it's telling me "No supported Live! Cam detected. Please plug in to continue...". How do I run the exe files and where should I extract the exe files? Or do I need to run them at all? Help please:S I'm using Vista 32 bit
Message Edited by Xleniz on 03-02-2009 02:04 AM

Live! cam voice problem

I'm not able to install my Creative Live! Cam Voice on my computer. I have a Creative Sound blaster Audigy 4 pro sound card. I think the problem is the sound card because i can install the cam and i?see image but i cannot install the mic on the camera. All the time windows ask me for USB fail on driver. I need help please

Can somebody please help me from this thread, i have a similar micrphone issue.
I have XP Pro SP3, i can uninstalled spy bot and AVG 8 in case it was causing issues, i have the USB devcie running properly with drivers ok, the video feed is ok, but it does not show USB device or Live cam mic as the manual says in the device properties of the sound section !!
I have looked and fiddles with all the Sound properties to find the USB device and get it working - no luck at all.
I must be on for a record of over 2 hours getting this to work, nearly 6 installs and re installs with the CD and via web.
HELPPPPPPPPPPP Please.

This problem showed up last year spent 2 months with apple senior supervisor for tech support no solution. When the "new" itunes came out problem fixed its self. Just did an update last week or so and back to the problem. In "get info" missing all rt side

Last year upon an update some of my itunes media was not working. Then the new version came out and it fixed itself.
Well another update and we start over with the problem. In the itunes store you can not preview any tv show, music video, or movie.
In your itunes library none of the purchased movies, tv shows, or music videos play. The element the same is in the get info tab. The information in the right side pane in the middle is gone. The left side information is still present. The right side info is the purchase info. Even an item downloaded today had the missing info and will not play. After dealing with apple support with the first go around last year. I uninstalled and reinstalled itunes 8 or more times, in the proper order. I deleted my itunes library and reinstalled it. We deleted all types of program files and program data. nothing worked. I was trying things on my own and foung nothing. Please help I am so frustrated with this. It seems to be a codec error that I can not solve.

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

2700 camera standby problem

Similar Messages

Maybe you are looking for