270x Faulty behaviour after Windows boot
Hello i own a 270x from January 2014, the unit that im using is the 2º, the first one broke in the first 4 days of use.
Until now it was working fine, but yesterday when i was playing cs go, the screen freeze in 1 solid color, and i was forced to doa hard reboot to the pc.
After that, every time the Windows boots, the image in the bios and windows boot screen is fine, but after the that, when the windows load , the image freezes, sometime in a solid color, other times the image is full of artefacts or vertical strips.
The strange thing, is that in 2D mode (safe mode), the PC boots fine and the image doesn't distorts. I have tried to reinstall the drivers(v13 and 14), tried to run a linux live boot, tried the gpu in another PC(different mobo,psu,cpu,ram) and the behaviour is the same.
I suspect that the ram off the graphic card is faulty, does anyone in here have another suggestion i can try, before sending the card to rma.
Best Regards
Follow this >>Posting Guide<<
Might be that vBIOS update is required:
https://forum-en.msi.com/index.php?topic=167763.0
Similar Messages
-
Can't play Song After Windows(Boot Camp) installation
Hi
Itune stoped playing many mp3 song .
I installed windows with boot camp and played some songs in windows media player ,
right after I finshed the installation , I tried to play some songs in Itunes, but Itunes won't even recognize them ,
He just skip them , he also removed the artwork icon form them.
those several songs can play with quicklook with no problem .
thanks
GideonI have no idea why it didn't work last night but I tried your method again and it worked great! Thank you, saved me the time of going to the apple store
-
Screen goes blank after windows boots up.
i just updated my graphics driver through HP SUPPORT ASSISTANT when suddenly my laptop went blank and restarted on its own and after the windows logo i got a blank screen but the process is running in the background,just the display is gone.i rebooted in safe mode and disabled my graphics driver Radeon HD 6490M and it booted normally but with a lower resolution.i am not sure what the problem is.
my laptop model is HP PAVILION dv6-6119tx
This question was solved.
View Solution.yes the issue is solved.just boot into safe mode and disable the ATI graphics driver.then boot the into normal WINDOWS.the screen resolution will be low and now UNINSTALL INTEL graphics driver.then restart your system.now when you boot into WINDOWS,the INTEL driver will get installed automatically.if you are connected to the internet,the driver will be downloaded from WINDOWS UPDATE.so you need to skip that step.and the driver will get installed from existing folders.after it gets installed reboot your system.and it should work fine
-
Database behaviour after Windows XP resumes from "Hibernation"
I am considering the following power failure handling model:
1. Connect an APC UPS to PC;
2. Configure "PowerChute" and PC so to "hibernate" the PC in case of power failure on the mains;
3. Do NOT shutdown the Oracle DB before the hibernation.
4. Let the Oracle DB resumes from hibernation. No need to shutdown / startup the database instance.
Are the Oacle DB designed to work properly after resuming from Windows XP hibernation? Any documentation mentioning this scenario? I've do article hunting but in vain.
Thanks.
KennyI haven't seen any documentation about this and I don't think I would plan for a production environment that has hibernation enabled but I hibernate my laptop all the time. I've nver had a problem with XE working after I resumed.
Normally, TOAD and/or SQL Developer will lose their connection. But that makes sense.
Thanks,
LewisC
http://blogs.ittoolbox.com/oracle/guide -
It seems as if Windows is the only operating system, but the disk shows only the space that I gave for Windows not the entire 500 GB.
Reboot, hold the option key down at the chime, release it when the boot manager appears, select OSX
You really need to read the Boot Camp Documentation, and do you have a backup (in case you can't recover?) -
Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp
Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?
-
Dell Latitude E6520 fails to boot after Windows Updates
Hello,
I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
a recovery disk and run:
dism /image:D:\ /cleanup-image /revertpendingactions
This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending:
kb2982378
kb2978742
kb2977629
kb2976897
kb2973112
kb2972211
There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
2014-09-18 10:52:04:214
496 540
AU Install complete for all calls, reboot needed
2014-09-18 10:52:04:216
496 540
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:623
496 8a4
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-09-18 10:52:04:623
496 8a4
AU Triggering Offline detection (non-interactive)
2014-09-18 10:52:04:623
496 8a4
AU AU setting pending client directive to 'Reboot Pending'
2014-09-18 10:52:04:623
496 8a4
AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
2014-09-18 10:52:04:625
496 8a4
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:625
496 1668
AU #############
2014-09-18 10:52:04:625
496 1668
AU ## START ## AU: Search for updates
2014-09-18 10:52:04:625
496 1668
AU #########
2014-09-18 10:52:04:626
496 1668
AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
2014-09-18 10:52:04:626
496 166c
Agent *************
2014-09-18 10:52:04:626
496 166c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:04:626
496 166c
Agent *********
2014-09-18 10:52:04:626
496 166c
Agent * Online = No; Ignore download priority = No
2014-09-18 10:52:04:626
496 166c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-09-18 10:52:04:626
496 166c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-09-18 10:52:04:626
496 166c
Agent * Search Scope = {Machine}
2014-09-18 10:52:05:210
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:07:170
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:475
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:569
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:11:590
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:14:999
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:16:887
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:18:753
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:19:623
496 1668
Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
2014-09-18 10:52:20:673
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:573
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:773
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:464
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:651
496 1668
AU AU received handle event
2014-09-18 10:52:26:366
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:27:520
496 1668
Shutdwn user declined update at shutdown
2014-09-18 10:52:27:520
496 1668
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:27:520
496 1668
AU AU initiates service shutdown
2014-09-18 10:52:27:520
496 1668
AU ########### AU: Uninitializing Automatic Updates ###########
2014-09-18 10:52:28:206
496 166c
Agent * WARNING: Exit code = 0x8024000B
2014-09-18 10:52:28:206
496 166c
Agent *********
2014-09-18 10:52:28:206
496 166c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:28:206
496 166c
Agent *************
2014-09-18 10:52:28:206
496 166c
Agent WARNING: WU client failed Searching for update with error 0x8024000b
2014-09-18 10:52:28:253
496 1668
Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
2014-09-18 10:52:04:216-0600 1
193 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems
(KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
(KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
for Windows 7 for x64-based Systems (KB2978742)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:425
496 1668
Service *********
2014-09-18 10:52:28:425
496 1668
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-09-18 10:52:28:425
496 1668
Service *************
Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.Hi ChristianBoman,
We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
http://windows.microsoft.com/en-us/onedrive/share-file-folder
for the update error 0x8024000b, please refer to the following article.
http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
Please take the following steps:
1. Run the Windows Update Troubleshooter.
2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
3. Copy the following text, and then paste it into the Run text box:
Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
4. Click OK.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.
Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?
-
No boot option after Windows 7 install on Mac Pro
Hi,
I have problem and it is very frustrating.
My configuration
Mac Pro 1.1 2x2.66
RAM 5 GB
HDs
Bay1 500GB (have a Mac OSx 10.6)
Bay2 250GB (install Windows 7 Ultimate 64bit)
Bay3 250GB (in raid Mac OSX 10.6.6) primary system
Bay4 250GB (in raid Mac OSX 10.6.6)
I have install Windows 7 via Bootcamp from system 10.6.6 and format and install Windows 7 on HD in Bay2. After installation I try to choose which operating system I want to run (with option key) but nothing happen.
It was grey screen without apple logo and system boot to Windows 7 only.
I try everything to boot with different options (key shift,x,c,...) but nothing happen. I can only boot with windows 7 and if is the windows 7 DVD in drive first ask to boot with DVD, after that boot on Windows 7.
I try to put Mac OS system DVD but still don't want to run.
I also try to remove HD from Bay1(macosx) and Bay2 (windows7) and boot from Raid HD and I have error that there is no boot system.
In windows 7 I run Paragon HFS+ and I can see HD500 in Bay1 but cant see in Bay3 and 4 (RAID hd). In disk utility I can see all hard drives.
I try to reset PRAM but while booting what ever I press nothing happens and boot only windows 7.
I need solution for this problem, please help me with this issue, thxAnother thing that might be close...
I've installed Win7 64-bit on a second HDD. It is Ok to choose boot with 'option' key, but another option is missing: while in win7 apple's bootcamp control panel shows both MacHD and Win7 bootable partitions, so I can tell 'software way' to boot to win or to Snow Leo. It's OK. However when I open 'startup disk' in OS X there's only Mac HD so if I need to reboot to windows I can't just do it with several clicks. I actually have to shut down OS X, wait for boot screen, press option and then wait for the boot options to appear and them choose. It's 'a bit' annoying, let alone windows version of bootcamp seems to do the job smarter. And it really is a good thing to choose "reboot into desired OS" with a click and go to kitchen for tea or something and not seat in front of the machine waiting for boot screen...
Am I missing something? Is it done the other way then 'system preferences>startup disk'? -
Boot devices broken after Windows 8.1 installation
Hey guys, I work for an IT company and am having some troubles after installing Windows 8.1. I run an enterprise copy provided from my company, so I couldn't do the update, and used an ISO to perform the update manually.
After the update, I'm no longer able to boot to anything besides the Windows Boot Manager. This includes all CDs, DVDs, and USB devices. I also can't boot to my Linux installation, but that was expected to break during the upgrade.
I have a computer with UEFI, I've disabled fast boot and secure boot. I've tried setting my bios boot to UEFI (which should work with GPT disks created with applications like rufus) CSM, and UEFI and CSM. When I try CSM, I don't have any boot options and
my computer gives me an error about trying all boot options and failing.
At this point, I can't boot to a USB CDROM, or any of my live USB disks. I have created both legacy boot disks and UEFI boot disks to no avail. I have tried resetting my BIOS to factory defaults.
Advanced startup settings doesn't give me an option to boot from a device any more like it used to either, so that's out of the question. I can't even wipe my PC and start again because I can't boot to anything besides Windows 8.1.
Does anyone have any suggestions on what to do?
Edit
Also, booting to recovery doesn't work. I have a recovery disk that I created, but I can't use it because I can't boot to recovery (on Samsung, F4 at boot) to apply the image.Hi,
In Windows 8.1, you need to use the tools available inside Windows 8.1 to boot to a DVD or USB drive.
Please open PC settings and click Update & Recovery, and choose Advanced Startup option.
You can refer to these:
http://www.youtube.com/watch?v=QsBo8yikz7U
Hands-On with Windows 8.1: System Recovery
http://winsupersite.com/windows-8/hands-windows-81-system-recovery
Hope these could be helpful.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows disc does not update after resizing boot camp partition
When I bought my iMac, it came with a 500 GB HDD. I used bootcamp to make a 200GB windows partition and a 300GB Mac partition. The other day I bought a 250GB SSD, and moved everything from my 300GB Mac partition onto the SSD.
My plan was to use the whole 500GB HDD for windows. So, I deleted the 300GB Mac partition and made it free space on the drive. I then expanded the boot camp partition to take up the whole drive using Mini Tool on windows 7.
Now, windows 7 shows that my drive is 465GB, but when I boot into mac, the bootcamp hard drive still reads 200GB and 300GB are "free space" even though I expanded the drive using Mini Tool.
I tried to fix this by filling up the hard drive with an extra 120 GB so it exceeded the 200GB limit that windows shows. But when I booted back into OSX to see if it had worked, none of the files were showing up in the drive, making me believe that boot camp and OS X are not reading changes I am making to the bootcamp drive when I use Windows.
How can I change this so Disk Utility shows the full size of the disc, like Mini Tool does?
I will try to upload screenshots soon.Re-sizing Windows partitions is not supported on Bootcamp. It requires a clean install. The other option is using Winclone.
Boot Camp 5.1: Frequently asked questions
How can a Windows partition be resized after Windows is installed?
You need to delete the Windows partition using the Boot Camp Assistant, and start over to change the size of the Windows partition. Back up your important Windows files first. -
Boot Camp: Mac Pro won't start after Windows install
After installing Boot Camp on a Mac Pro dual 2.66 (firmware updated), XP installer went through installation & copying files, then restarted. Went to a black screen with white Windows-style text that said something along the lines of "XP cannot start from this CD, press any key to restart." Totally unresponsive, held down power to restart. Will no longer power up. Have reset the SMC without any effect. Makes a brief sound when trying to start, but does not actually start up.
Is there any known power issue that I might be able to solve myself, or is the supply likely blown?
Mac Pro Mac OS X (10.4.8)I put Vista on its own dedicated drive, 64GB Vista, the rest as FAT32 to make it easier to share files. I had to remove the OS X drives in order to allow Windows/Vista to install. Once installed, had a black screen and some blue crash screen, until I ran the BootCamp driver updates.
I would try unplugging your drive(s) first and see if you boot from Tiger Installer DVD - or better, boot Apple Hardware Test (hold down "d" on startup from Install Disk #1). -
i was trying to download windows 7 on mac book air 10.8.2.seems like i didnt copy my windos disk on the usb properly at the begining,so after the boot camp steps the screen is black and telle me to put the write disk.
eventually i made a coorect usb windows 7 and put it back to continue as it was saying so,but there is no change and the screen still is dark and says no bootable disk ,insert.
how to solve the problem?Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea. -
[e540] Windows boots on second time only after being shut down for some time
Hello!
My newly installed windows 8.1 on my new laptop Lenovo ThinkPad E540 I have the unfamous boot problem... ( http://www.tomshardware.co.uk/answers/id-1773872/boot-time-cpu-led-stays-time-booting-works-fine.htm... )
I've read all the stuff about hybrid shutdown and everything, tried to disable it, played with UEFI boot priority in BIOS, and when finally it seemed like FastBoot IS working, (tried it and everything went well and fast), today, when I turned on my lapop, it started, and after windows intro loading animation, it went black, and I heard like HDD stopped working (everything went silent - just like every time since I started to have this problem)...
AND finally, I'm desperate...
I turned my laptop off and on yesterday, just to test FastBoot, and, as I said, with no problems... but the day after, same thing happened...
So - when I turn it off and start again in short time, it seems to work. But when I shut it down for example in the evening, in the morning it freezes again, have to turn it off by pressing power button and then on again, which works... It is driving me crazy..
IS THERE SOMETHING TO GET IT WORK??Hi @Anotheran ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv5-1104tu Notebook and issues with startup. I recommend to restore the BIOS defaults.You could restore the BIOS with this document selecting the reloading the BIOS default settings. Not rollback. Restore BIOS defaults are needed.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
You might want to look at this document on overheating. Which will cause the Notebook to heat up and shut down.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers that might need updating.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Help help please... I'm running Photoshop CS, on a Windows XP machine. After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this product I must re-activate it". BUT the activation link informs me that they no longer support the product (neither online nor telephonically). So how can I re-activate this software?
Hello Helios & Eb29075,
+1. Please check log file for error message.+
+2. Check status of EM.+
+3. Please see:+
+How To Drop, Create And Recreate DB Control In A 10g Database [ID 278100.1]+
+Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole__ not found [ID 555218.1]).+
As you said above, yes, I did find OC4J config issue & EM Config issue and resolved them. But still I couldn't get my DBConsole started.
Yes, I was able to drop DBConsole<sid> service using 'emca' repository drop. But, when I started recreating repository for DBConsole service, I wasn't able to do it. I tried several times but in vain.
Thanks,
A.P.
Maybe you are looking for
-
I just want to migrate all of my work (all photos are referenced) from one drive to another and have my aperture library start working off of my new larger hard drive.
-
Satellite M645-S4050 Techinical Problems
I currently bought this laptop 3 months ago within the late august and it was working fine. After the first week having it, the laptop was having problems. For instance, the backlit buttons on the laptop (the lit icons above the function numbers) wou
-
IWeb Portfolios and google search results
I recently created a website for my business with a selection of portfolios showcasing work I had done. On of my clients had noticed that when they google their business one of my folio pages comes up with the following: back back. forward forward. b
-
Several Onmessage and asynchronous process doesn't function
Hi, I'm using the BPM suite v10.1.2.0.2. A process instantiated by a pick with two onMessage, each receiving a distinct message from two different invoke from another process, doesn't function. I have the following error : <remoteFault> <part name="s
-
Provider not compatible with Ora Client
Hi, I just installed the Oracle DB 10G v. 10.2.0.1.0 and the ODP.NET v. 10.2.0.2.20 in my computer. After I did that, I tested it and received the message: "the provider is not compatible with the version of oracle client". Do you know how to solve t