2710 Xi Back Page Upside Down Under Vista with Duplex

I have seen where "Bob" has helped others with upside down printing on the back page with Vista, using the duplex function.  My operating system is Vista Premium and my printer is a Photosmart 2710 xi.  Can you help me with this same issue?  I am open to someone sending me the patch.  I have sent an email to "Bob" and I am also make this post.
This question was solved.
View Solution.

Thanks to Bob Headrick for giving me the patch to correct the problem of upside down (head-to-foot) printing on the back when using my duplexor and Vista Premium on my 2710 xi.  His patch works fine. 
I had difficulty understanding the instructions, but my son is a computer guru and used the patch effectively.  It worked!  It is unbelievable that HP doesn't coordinate with Mr. Headrick and resolve this issue for the sake of thousands of HP customers.  Shame on HP and thanks again, Bob.

Similar Messages

  • HP Officejet Pro 8000 WILL NOT PRINT PAGE TWO IN CORRECT ORIENTATION. SECOND PAGE UPSIDE DOWN.

    Cannot booklet print in duplex mode. Prints second and third side of page upside down and 
    page 4 as original page.   Does't worlin any mode, even booklet mode.  Had a HP5400 previously,
    which did booklet printing just fine.  Can the driver from the 5400 be adjusted work on the 8000?

    If you have HP software in your Applications folder that was not specifically meant for 10.7 (Lion), uninstall the software using the 'scrubber' option:
    Go to Applications/Hewlett Packard/ click on HP Uninstaller
    Click on Continue
    Highlight your device on the left pane
    Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall <<<< This IS the Scrubber Option, there is no button labeled "Scrubber"
    There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
    Click Continue and let it finish
    Restart your Mac
    Download and install this: http://support.apple.com/kb/DL907
    Now reset the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order?

    In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order? I am working on a Macbook pro running OS X 10.9.4.  Our printers are fully capable for booklets with staples and folds. Would love some help. Thank you!

    To: ~graffiti
    (This email is not intended to go on public forum -- but I wanted to respond
    to you)
    Thanks for your reply....FYI...I was trying to download from www.adobe.com on
    the specific page that has downloads of your products.    As far as the
    alternate source is concerned I am not totally sure what the capabilities it has as
    I am recovering from a hospital stay and had to send my wife to retailer to
    pick this up because I am accessing email from home until I return to work and
    need something to work now.  I don't yet have the SW.  (I would have had her
    buy the actual Adobe Pro 9.0 -- but it is a wapping $499 and change).
    Regards,
    Staurt Rednor ("Stu") - [email protected]
    ===========================================================
    Subj:   New message: "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader"   
    Date:   4/5/2009 7:38:17 PM Eastern Daylight Time  
    From:   [email protected]   
    Reply-to:   [email protected] 
    To: [email protected]  
    Sent from the Internet (Details)   
    SGuitar43,
    A new message was posted in the thread "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader":
    http://forums.adobe.com/message/1867664#1867664
    Author  : ~graffiti
    Profile : http://forums.adobe.com/people/~graffiti
    Message:

  • How do I correct odd page upside down while duplex printing?

    My MX870 prints every other page upside down while printing a catalog in duplex mode.  How can I correct this? The catalog was written using MSWord 2007. Obviously, I can manually duplex the catalog. I am praying there is a solution to be able to automatically duplex.
    Thank you.

    After 3 days of futile efforts to solve odd page upside printing in duplex print. The problem was solved as follows:
    Go to the print menu
    1. Go to quick setup
    select "Preview - Duplex - Paper size - Orientation [make sure document and printer orientation are the same}
    2. select "page setup "
    on page layout select "normal size print" - "duplex automatic" - "stapling left side"
    Print area setup  "select - used reduced printing"       Selection of " use reduced printing" is the key to solving the problem
    3.  Problem solved

  • Office Jet 8000 -- Duplex Printing -- back side upside down

    When printing a booklet on my Office Jet 8000 A809, using duplex printing, the back side of each page is upside down.  Operating System is Windows Vista.  I'm sure there is a simple solution, but I can't find it.  HELP.

    Choose the type of duplex - you probably have Short-edge binding enabled.  Change it to Long-edge binding.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Duplex Printing, front on back and upside down...

    Dear Bob,
    I have a problem with a LaserJet CM2320 MFP fxi, running Windows XP SP3.
    When printing a single page it is ok.
    When printing a (word)-file with e.g. 4 pages, the first page is printed on the backside and the second page on the front, and both are also upside down... Putting the paper the other way around in the printer doesn't solve the problem, because the single-page-print will be messed-up...
    Thanks in advance for your help!
    Kind regards,
    Titus

    Ctrl++ worked

  • Problem with duplex printing - alternate pages upside down

    I have been trying to print 2 per side, double sided from Adobe Reader. I have tried this as two up, duplex and also as booklet printing. Whatever I do, the second side is upside down. "Flip on long/short edge" appears to make no difference.
    Trying to resolve it in the printer properties is worse: Adobe Reader seems to override them and I get single sheets single sided. If I select both "two sided" in the Reader dialog and "Duplex" in the printer dialog, the second side overprints the first side (but is the right way up!.
    I am using Reader 10.1.2 with Windows 7 and an HP Deskjet 6980 printer with duplex unit using the Windows 7 default drivers. I have installed the "AdobeReaderPatch10.1.2_cpsid_92870.zip".
    There must be a combination of settings which works! Can anybody help? Please?

    TThat is my problem also. You are flipping to the long side, you need to flip to the short side. I order to get the back one to be right side up. I was able to get windows 8 to do that today without doing anything beside selecting landscape and flip to short side. But when I use my iPad I donot have that selection. I need software to be able to have that option.

  • Page upside down

    dear people,
    I have a document , (that I never made) , but every other page is upside down , this is a bit of a problem to keep turnig it around , i can turn the whole document around , but I just want certain pages and save like that . is this possible  ¿
    thanks

    Ah ha ,, yes that is interesting . it probsbly would be a one off thing . I shpuld have elook around in case there are any other small tasks to do in that time period .thanks fpr the advice///

  • I have a LaserJet Pro P1606dn - the second page prints upside down when using the duplex print optio

    Operating system Windows 7 32 bit.  I have re-installed the printer an I have downloaded and applied the most recent drivers from the HP site.  The built in set-up shows the settings correctly as duplex on and bind on the long edge but the second page continues to print upside down i.e. it seems to always print as binding on the top edge.
    However when I print from my iPad via Airprint the duplex print works perfectly!

    IF you are using a printer with 2-sided printing, in the expanded print dialog you will have a selection for long-edge binding OR short-edge binding. Whichever setting you have set, switch to the other one.
    Walt

  • Booklets prints second page upside-down

    Good morning,
    I find it quite impossible that nobody can answer if not solve this problem.
    Certainly I make some mistake but please do tell me where.
    This is driving me mad. Sorry. Following I put again the problem I posted few days ago:
    facts: iMac27, OSX 10.8.3, Adobe Acrobat Pro 10.1.6, pdf generated from inDesign. Printer Xerox WorkCentre 7425
    I select print booklets, page 1 to 4, paper size A3 landscape, print front/back, binding left.
    When I print, the first page is OK, the back page is upsidedown.
    I have already tried all the possible setups but I get the same result.
    Thank you very very much.

    Binding - Top

  • In Invoice Printing back paga T & C over lapping with first page Item text.

    HI,
    I am using sap script to Print invoice.
    I am printing Line item and its Item text one first page and Next page.
    secondly I am also printing Terms & condition on every back page.
    Problem is.. I am getting 300 Item text line to print in First page and so on..
    On first page its printing 10-90 its ok, but its printing 100 only one line one back page
    rest i.e. 110 to ..... so on its printing on next page.
    In All page its happending, its prining one line of Item text on back page, that it should not be print.
    I have tried Protect and endprotect. but its not working, I have tried also using height of page, but prblem remain same.
    Kindly suggest.

    Hi,
    The idea and solution suggested by u is working fine, many thanx.
    But one issue is happening after implementing the solution.
    A blank page is printing in the last of print out.
    We are having FIRST page wich is having next page BACK page and
    in BACK page v r having NEXT page as a next page.
    So wen v are printing the invoice , its reach to the end and printing the BACK page just back side if the last page.
    After that its again creating NEXT page wich is unwanted and coming blank.
    Seems its happening just bcoz of v r having NEXT page as a next page in BACK page.
    Now everything is coming fine as v  expected, except last blank page.
    V now require to control this unwanted page.
    Kindly suggest.
    Waqkas
    Moderator message: please do not use SMS speak! (I assume "v" means "we")
    Edited by: Thomas Zloch on Oct 26, 2010 10:30 AM

  • Enhanced USB Port Replicator under Vista with blank taskbar

    I have an annoying bug where the vista taskbar goes blank under Vista.  I'm running an X300 with the Enhanced USB Port Replicator attached to an external monitor.  I have set the external monitor as the primary monitor.  With this configuration, the taskbar usually goes blank -- i.e. the taskbar shows nothing except a window frame and the start button.  There are no applications shown, no quicklaunch icons, no tooltray icons... nothing.  The taskbar is still functioning correctly, and it will show thumbnails of open applications, or allow you to click on any items that are there but not displayed.  Any idea why this bug is there or how to fix it.
    I found it really annoying and problematic till I found an quick workaround... unlock the taskbar and stretch it out and it will begin displaying properly again.

    I have an X301 running Vista Business.  The 2 second freezes are really annoying.
    Has anyone tried the displaylink driver http://www.displaylink.com/downloads.html to see if it helps?

  • Photoshop fails under Vista with X1600 on MBP

    All images in Photoshop display overlaid with crosshatched lines. Adobe points at ATI and says "Known problem: update the video driver". ATI points at Apple and says: "Drivers are supported by the laptop manufacturer". Apple has nothing to say on the matter. How do I ensure I have the most up to date video drivers installed?
    System configuration:
    MacBook Pro 17" Core Duo 2.16GHz
    Graphics card: ATI Radeon X1600
    Vista 32 under Boot Camp
    Adobe Photoshop CS4
    Bruce

    Hi Bruce,
    good news.
    Glad to hear that it helped you.
    As for the Mobility Drivers, ATI/AMD (and Nvidia too) only support a handful of notebook manufacturers directly and Apple is non of them.
    The 'funny' thing however is, that all needed drivers are in the Desktop Radeon Driver package.
    Only thing missing are some lines of code in the .inf file which is needed for installation.
    Have Fun
    Stefan

  • Satego P100-491: How to adjust Contrast under Vista with Nvidia 7900 Go?

    Hi
    Can somebody help me ? How is it possible to modify the contrast on my new notebook Satego P100-491 OS Vista Nvidia
    Gefore go 7900 gs Driver 7,15,10,9748. Following the help goto the Nvidia control panel option display and change the settings but there is menu for "adjust desktop color settings.
    Thanks

    Hi,
    with that old XP drivers it was possible, but now.. you can try it with these color settings, but I am not sure if you would have that success.
    I tried already to do some things like you (some Contrast, gamma, etc.) but I think they did not implemented that functions at the moment in the Vista drivers.
    So, maybe we just have to wait...
    Greets

  • HP7310 all-in-one if automatic duplex option chosen every other page prints upside down, Fix?

    Whenever automatic duplex printing is selected the printer prints the first page correctly then sucks the page bak into the printer bu it prints the reverse side with the second page upside down.  How do I fix this?

    What operating system? If Vista (or Windows 7 upgraded from Vista)  then apply the patch available from a link here.  For other operating systems see the Duplex Printing Guide here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for