2711x monitor is blank

My 2711x screen is blank, I try pressing f10 process but it's not working...what should be done? to turn on screen? Please help...

Hello @deekay720,
I understand that your HP Pavilion 2711x Monitor remains blank when you startup your computer running Windows 7. If you are using an HP computer I would recommend that you review and follow the steps set out within the HP Support document: Screen is Blank after Starting the Computer which has steps to help address this issue.
If you have a different computer I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try different cables between your computer and monitor.
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

HP 2711x Monitor

I have a 2711x monitor, worked well for about 17 months, not sure what happened but now all I get is the top 25% of the screen working+ but this is with program win 7 running and the below is monitor on boot up with no input. Sure something is blown. What is it and where can I get the parts? 727-537-9283 thanks John

Hi buettnerjg1, sorry to hear that you are having issues with your monitor. Just wondering, have you attempted to connect another monitor to see if the issue carries over? If it does, then it could be a setting in the Display settings option. If it doesn't , here is a link that troubleshoots Blank Monitor issues. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01295035&lc=en&product=5076904&tmp...
If you are still having issues, please feel free to write back.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Dual monitor (w/laptop): external monitor is blank.

Hi! just installed arch for the first time a day ago. Right now what I'm working on is on getting my second monitor running (mostly for development purposes... and movies ^__^).
I'm using Arch64 with the open ATI driver and KDE. Whenever I connect the external monitor, the monitor seems to detect a connection occurred (the "check video cable" message disappears when I connect it and comes back when I disconnect it), and so does KDE. When I open my display settings, it tells me a new monitor was connected and asks me if I want to configure it.
Then I choose to configure and use the two monitors giving the following screens (right now I'm at college testing with monitors in there, thus the low resolution, but behavior seems to be exactly the same):
(EDIT: resized. In case of wishing to read full images, just take the "resized/" out of the URI)
However pretty the full screenshot looks like (... I just mean that even if it looks like the second monitor is working), the monitor remains blank.
Using arandr (xrandr's gui), it is exactly the same result. I might be doing something wrong (almost certainly I am ) (EDIT: decided it was a good idea to show what I did with xrandr).
In /home/<myuser>/.xinitrc my file looks like this:
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
xrandr --output VGA-0 --mode 1440x900 --pos 1600x0 --rotate normal --output LVDS --mode 1600x900 --pos 0x0 --rotate normal --output HDMI-0 --off
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec ck-launch-session startkde
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
The laptop's model is Toshiba Satellite L775d. I'm not sure what other information should be required in this situation, but I will be loving to give anything that isn't compromising
Thank you!
(PS: so far Arch has treated me nicely let's see for how long)
Last edited by Mamsaac (2012-03-16 12:24:27)

Thank you for your response!
# xrandr
Screen 0: minimum 320 x 200, current 3040 x 900, maximum 8192 x 8192
VGA-0 connected 1440x900+1600+0 (normal left inverted right x axis y axis) 410mm x 256mm
1440x900 59.9*+
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 60.0
832x624 74.6
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
LVDS connected 1600x900+0+0 (normal left inverted right x axis y axis) 382mm x 214mm
1600x900 60.1*+
1440x900 59.9
1280x854 59.9
1280x800 59.8
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
I wondered the same. I initially only used KDE for it (that's how it worked in other distros, but I'm guessing Fedora and Kubuntu have way more stuff on top). I moved to xrandr later after searching for options and I did select "Ignore" when KDE asked me to configure and just went ahead with xrandr. The same still happens.
Thanks, I hope I gave the right information.
EDIT: Adding some extra information. I tried rebooting with the CRT cable connected. When the kernel initiated its loading, the messages only appeared on the external monitor. It was afterwards (it was pretty quick, but I will assume it was when radeon's modeset hit) that the external monitor went blank again and, in that situation, the laptop's monitor went blank (so none of the two monitors worked... and I was so hopeful!)
Last edited by Mamsaac (2012-03-16 12:14:51)

Why did my external HD monitor go blank after working fine while hooked up to a new MacBook Pro?

Why did my external HD monitor go blank after working fine while hooked up to a new MacBook Pro? I have the Moshi adapter and HDMI hooked up to the 27 inch monitor. It was working fine and when I came back after lunch the monitor was blank but the MacBook Pro screen was fine. Could it be the adapter?

could be, try powering down the mac, with the exmonitor connected and see if it is recognized

New Pavilion - the monitor is blank - help

Brand new pc (Pavilion p 6301sc). I followed the quick setup but the monitor is blank (minitor = HP LP2065). I tried the minitor on anorther computer and the monitor is OK. The new computer starts up, but I can´t see it. Can you help me?

Problem solved!!!!

Why does my video clip show in the program monitor only when it is playing (the program monitor is blank otherwise)?

I am using WIndows 7 64 bit, and the most recent version of Premiere Pro CC on an I7 machine with 8GB of memory. I have imported a HD .mov clip and placed it on the timeline. When I press 'Play', it shows in the Program Monitor window. When I stop the playing, the window goes blank. I have rendered the clip (it has a yellow bar above it). Even after rendering, the yellow bar remains and the sequence only displays when it is playing. The source monitor has the same behavior.
Not being able to see where I am in a clip is making editing very difficult. I have used Premiere Elements for five years, I have taken the Lynda.com course, so I have some familiarity with the program that suggests that the frame at the point of the CTI should show in the program and source monitors.
What do I need to do to be able to see the frame in the monitors when it isn't playing?
Update: I spent 35 minutes with Tushar in a technical support chat (case number: 0186148124), during which time we deleted the contents of the Media cache folder in C:/Users/Your User Account/AppData/Roaming/Adobe/Common file (after using task manager to close coresync32.exe and creativecloud32.exe) and renamed both the Adobe folder and the 8.0 folder in Documents/Adobe/Premiere Pro/8.0. This didn't get it, but was necessary for the next step:
Going to the File menu, Project Settings, and selecting 'General Settings', Tushar had me change the Renderer to Mercury Playback Engine Software Only (I don't have a GPU accelerator video card yet). I received a warning that all previews would be deleted, which I accepted. That brought the image back to the Program Monitor.
I've posted this for anyone who may experience a similar challenge in the future. Despite a lot of Google searching before I contacted Tech Support, I didn't find anything even close to the description of the problem. I hope this provides that source for future searchers.
Jeff

Thanks, Ann. As I mentioned in my post, Tushar correctly pointed out that, without a GPU accelerated card (which I don't have - mine is a piece of junk which I will be replacing with a compatible one soon) you must use the software only settings. I had changed my project over to the 'software only' setting, and I still had the problem. The value Tushar added was the procedure for clearing the cache.
What I did originally was a newbie error, no argument. I posted it here for others who may fall in the same hole. Your reply confirms that, without a GPU accelerated card, use the software only settings (sounds so obvious, yet I missed it.....).
Jeff

Hp 2711x Monitor: Flickering red horizontal lines, dots, shapes

I'm not sure if I have two seperate problems or if they are the same problem. But lately my monitor has many red horizontal lines or red dots, or random red shapes on screen that flicker slightly. They only appear on parts of the screen that are dsplaying either black or any dark colors. Any part of the screen displaying white will have no lines at all. The problem will go away temporarily if I shut off the monitor for a while.
Also before it begins doing this, and during, the entire screen will go bank for about 1-2 seconds and then come back. It never gives an error message when it is blank. I run a dual monitor set up with my laptop display and the monitor and the lines only appear on the monitor, not the laptop display.
I have the most current drivers for the monitor installed.
The computer is a Clevo W110ER with i7 3630QM 2.4 Ghz and a 2 GB video card, running Windows 8.

Hi Blue07,
What is the model number of the monitor.
I worked on behalf of HP.

Start up has pink vertical lines then monitor goes blank on iMac

I was working on my computer when all of a sudden the screen went grey with 5 vertical pink lines appeared. I have switched the monitor off, but now it starts up with the pink lines then goes to a blank screen, what is the problem?

Sounds like a hardware problem ..
You can run the Apple Hardware Test
Or take your Mac to an Apple Store or Apple certitied repair provider listed here.

Pavilion f1703 monitor goes blank 2 seconds after start-up

When the computer is turned on, the monitor only functions for a couple of seconds before it goes blank..power light shows it to be working.
If I turn the monitor off at the front power switch, and turn it back on, the same thing happens..2 seconds of normal then blank.
In the couple of days leading up to this, the screen had a slight "flicker" effect going on.
All ideas greatly accepted!!

I am having the identical problem. I hooked this monitor that a friend gave me and it worked great for several days. There were no flickerings or any indications of a looming problem. Then it started going blank after 2 secs and continues to do that. I did see a warning about the "power saver", or something like that, was in operation. Unfortunately, I can't get it to stay on long enough to go into the menue and see if there is anything I can change there. Any help would be appreciated.

Laptop monitor goes blank

Can Flash cause a laptop monitor and the attached monitor to go blank when playing a game on facebook using firefox latest version? I have this version installed 11.7.700.225

I saw another thread in which people were wondering why you'd want to run a machine with a lid closed. For one thing, the external monitor resolution is much better w the lid down. It appears you have to have the laptop plugged in in order to get the external screen to stay live when you close the lid. This is kind of a pain because one of my desks is upstairs and one is down and sometimes I just want to run upstairs and work for 1-2 hours without bothering with the power cord, etc.

HP Omni 220-1050xt Monitor goes blank at random times and will not light up.

Recently my computer screen starting going blank without any warning. One minute it is fine and I am working away, then the screen turns black and no key sequence will bring it back. I have selected a power scheme that has never, never, never set in the categories. I also sent my screen saver to None. I took it to Staples to run a diagnostic which responded with no errors. Within 15 minutes of running, the screen was blank and the computer was unresponsive.

Hello @jlh41,
I understand that you are experiencing an issue where your HP Omni 220-1050xt Monitor is going blank without warning. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try different cables between your computer and monitor.
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

[GeForceFX] My monitor is blank

When i played some games ( Need For Speed Underground 2 or Swat4 ) with a some time, my video cards apears had some problem, because my monitor goes to blank, and the monitor light is turn off and on, i don t know how to solve!I try to install other drivers and put other 2 fans in the computer.
My configuration
Monitor - SyncMaster 710N
Video Card - FX5700
Processor - Atlon XP2.6
Memory - 1024ram
Motherboard - Asus A7V8X-X
Please Help me!!!

I'm having a problem with my VT2DRFX5700..
When I start up games that require good graphics such as SWAT4 or NFS Underground2 , the game will play for about a minute before completely locking up my computer in which case i need to power off and power on my computer again in order for the picture to come back. If I restart then the display does not reappear and no signal is sent to my screen.What i had to do?

Dual monitors go blank at random times

My mid-2010 Mini works fine, but lately my dual Dell monitors have started going blank at the same time. The only recourse is to power down the Mini and restart and the monitors come back fine. This has happened twice just today. A few months ago I went through a period where one monitor would go blank. That seemed to cease, but now both will go blank at random times.
Any updates on this problem?
Tx,
WK

First try resetting the NVRAM / PRAM, as per > About NVRAM and PRAM
Then what connections and adapters are you using..?
I have the same 2010 Mac Mini w/8GB RAM set up using dual 21.5" Samsungs DVI monitors. One is on the Apple Supplied HDMI to DVI adapter and the other is on a Kanex Mini DisplayPort to DVI adapter. I'm using the Kanex adapter, because I had nothing but the same trouble that you are describing using other Mini DisplayPort to DVI adapters including a couple of Apple branded ones.

IBM Thinkpad Monitor goes blank after a few miniutes

Hi,
I have aT43p with an ATI Mobility FireGL V3200 running XP Sp2. For the past couple of weeks the screen goes blank (Black) after several minutes. I can use the Fn-F7 to toggle the monitor between LCD and external monitor (which is not attached) and back to LCD (or dual display) and the LCD works again!, but alas only for several more moments and then it goes blank again and I have to re-toggle. I find that if I run on only battery power I get several extra minutes before Blacks-Ville. The same effect can be achieved by putting her to sleep and then waking her.
I should mention that there is a slight pink tinge to the display during the initial splash screen (while the option to enter the Bios via blue Access IBM button), but this goes completely for subsequent screen displays.
I can connect across the LAN using VNC and can see windows (as one would expect).
I have gone to the support area and downloaded all drivers and reinstalled to no avail. I have also checked the Monitor connections, but there is no obvious loose connection. I have also run a in-depth virus analysis (using ESET NOD) and an Adaware sweep, again with no positive result. I have also gone into MSCONFIG, disabled as much as I can and I have also rolled back using System Restore to a time before the issue presented.
Nothing that I have done to date has made the slightest difference.
The screen Blacks even if I go straight to Bios which inclines me to think that the problem lies outside of Windows.
If anybody has any ideas or suggestions I would really appreciate it.
Thanks
Dave
Message Edited by ddempsey on 08-10-2008 05:48 AM

Hello ddempsey,
I can confirm all your problems (except the "slight pink tinge"- sure it is not
a reflection or so?), I've got them on my a21p since a couple of years as well.
I am using an external monitor after I tried all software possibilties and was
fed up with the toggling. colours are still excellent, I contradict a dying
as such, a digital display is either on or off, not fading away.
in desperation I replaced the inverter card (part number 12P3053) as a
last resort but without any success.
so I was happy to find one with exact the same problem and I hope
by jumping on your train that someone comes up with a solution.
have you tried this:
if you do not boot windows, leaving a plain start screen
either by pressing pause or later f8 the display shuts down
in the same way, thereby proving that the problem
is beyond an explanation due to a higher resolution task.
this arouses a suspicion whether the ATi Rage Mobility graphic card
(messing up in all brands of notebooks - see copious complains in the www)
might be the cause. unfortunately ATI been bought by AMD
but the support of its successor for old cards is a disgrace compared
what Lenovo still delivering for ancient IBM users!
regardsDamian
Message Edited by Anvil2k8 on 08-20-2008 05:16 AM

Premiere Pro 5.5 program monitor goes blank, please help!

I started a super simple brand new project in Premiere Pro 5.5, importing only simple, small resolution png files (to create an animation), and my program monitor goes completely blank. This started happening right when I updated the driver for my video card. I run a Windows 7 64-bit machine, with NVidia Quadro 2000, driver updated (333.11), source footage is png files, my OS is up to date, I use just a single monitor, there are no error messages at all, when I try to scrub, my program monitor stops working (it shows a still image), then suddenly it goes completely black! I have no third party effects, plug-ins or hardware installed. And yes, my Mercury Playback Engine GPU Acceleration is good. I am completely stumped since the project is barely started. Does anyone have any ideas?!

started happening right when I updated the driver for my video card. I run a Windows 7 64-bit machine, with NVidia Quadro 2000, driver updated (333.11)
So... have you tried a different driver?
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
You MAY need to use an earlier driver
-Old Drivers http://www.nvidia.com/Download/Find.aspx?lang=en-us

2711x monitor is blank

Similar Messages

Maybe you are looking for