2730 Classic - Broken Screen, need location of 'OK...

2730 Classic - Broken Screen,  can handle that.
However, when i turn it on, i wait blindilyfor 30 secs, type PIN code for SIM card, but can't see which button is   'OK' button to accept PIN....
just want to use it as a 3G modem for the laptop
would love a link / picture of PIN login screen, or anything really 
Thanks /\/\ /\ \- \- 

I broke the screen on my 2730 this morning, just like you I coudn't find the OK button for the PIN.
I solved by putting the sim in another mobile, and removing the PIN.
I'm going to buy a replacement screen (about 10 euros on ebay) so if you still need a picture of the login screen, just ask.

Similar Messages

  • Nokia 6060 - Broken Screen, Need Numbers

    Hi,
    The screen of my 6060 is broken, however the phone itself (menus etc) are still ok - I just can't see the display. I'm about to get a new phone, and need to transfer my numbers from the phone to my SIM.
    I was wondering if another 6060 owner would be able to list the step-by-step button commands that are required so that I can transfer all contacts to my SIM card.
    I really appreciate any help you can provide.
    Thanks!

    take your phone to your local nokia care centre and they'll be able to recover your phone numbers
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • I have a nokia 2620 with a broken screen need to g...

    I can just barely make out top of screen, and I need to get my contacts off and onto the sim card. If anyone can give me the sequence of keys to transfer them I'd appreciate it. I have a new [phone, sim card works in it, but my contacts arent on it. I can't even remember my mothers phone #. Stupid technology.

    The drive is probably formatted using the Windows NT filesystem; Mac OS X can't write to this format without additional software. If desired, use the Disk Utility in the /Applications/Utilities/ folder to erase it.
    If it's formatted as MS-DOS, FAT32, or exFAT, run a disk repair utility on it.
    (84212)

  • Broken Screen- Need Directions

    My screen is completely broken. The clicker is on. How many "clicks" does it take to:
    a) change my volume limit
    b) shuffle my songs
    and
    c) get to my songs list?
    Thank you!

    You can pull the hard drive out and put it into an external case.
    Here are video instructions on removing the hard drive on the Aluminum Unibody
    http://eshop.macsales.com/installvideos/macbook_13_unibody/
    Here are video instructions on removing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
    Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • I need to install the HP drivers on a laptop with a broken screen in order to get VGA port to work.

    OS: Windows 7 Home Premium SP1
    Hewlett Packard Model: 2000 2a20ca Notebook
    Oh my god please give me some insight here, it is so hard to find the right answers and I refuse to lose to this technical box that's driving me nuts! So here's the run down:
    My screen broke on laptop...fine. It was connected via HDMI to TV and working fine. Until one day it decided to not turn on. I think due to Windows updates and hubby had no patience so kept restarting
    I tried to reload Windows on it, not thinking about the drivers, and I'm pretty sure I managed to reload Windows. Now I need the drivers to install chipset, networking etc. (which I have a disc for)
    The problem is I cannot see the screen in order to click "install", I can't see the BIOS or the boot sequence. Ugh! And even if I could, the drivers are not installed to use the CD ROM or VGA port.
    I can HEAR Windows start up and turn on! Doo-DO-Doo-DO lol the darn thing is working!
    The monitor works in my other laptop.
    Would/Should the VGA monitor work if I could get it to start in safe mode?
    I've heard of a program that can streamline the driver's into a Windows installation disc so everything is installed altogether but how can I reinstall Windows if the drivers aren't loaded for the CD ROM?
    Is there a way to get the necessary drivers installed? or is this notebook now garbage?

    RocknRoll77 wrote:
    Seriously? 
    1.  The model number is the first thing at the top aside from the OS.
    2.  In my explanation it states:  "I have the drivers on a disk"
    Thanks for all your help!
    Getting the drivers is not the problem.  Getting the drivers installed on a laptop with a broken screen...is the problem.
    Ok, well sometimes you can't use external monitor to see what is happening in some laptops and the only real way to fix this is to fix the broken screen so you can reformat and resinstall the system again. Those are you only options at this point in time.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Broken screen, not able to log in, need to do system restore

    1. Pavilion dv6500 laptop with broken screen.
    2. Operating system: Vista
    3.Error message: "The User Profile Service service failed the logon. User profile cannot be loaded"
    4. Microsoft updates?
    I need to know (a) the key stokes required to carry out a system restore to a saved restore point and (b) the key strokes to carry out a hp system recovery without being able to see the screen.
    I need this to try to retrieve the data I have on a laptop with a broken screen and vga port. I have been using an HDMI cable to connect it to a monitor but recently, vista stopped allowing me to log into my user account (giving the error above). To fix this I would use safe mode to modify my registry but safe mode does not project through the HDMI port to the external screen.
    Therefore, I would like to know (a) the key strokes required to restore to a saved restore point and (b) the key strokes to carry out a hp system recovery without being able to see the screen or use the mouse.
    Thanks.

    Simplest solution to retrieve data under those circumstances to me would be to remove your HDD
    Plug it into another computer by eSata
    Then just copy whatever you wanted onto the other HDD.
    If my reply was helpful please click the "Kudos" star.
    If your problem is solved please click the "Accept as Solution" button

  • Nokia 1209 with broken screen i need contacts.

    I have a broken screen and i need to copy the contacts from phone to screen. Does anyone know the keystrokes/steps to do this?

    I think the ´up´on this answer is for a phone with a 3x3 grid. Does anyone know the key sequence to get into ´contacts´ with a list menu?
    Thanks
    nj15 wrote:
    You will need to exert an effort here (Bluetooth transfers).
    But why don't transfer them to the SIM card memory instead?
    Middle button> Up> Middle button> 7 downs> Middle button> Middle button> Middle button> lastly middle button again. There you go
    Good luck

  • Nokia 2630 with broken screen i need contacts

    i have a broken screen and it is hard to find an attachment to fit to the pc, pescky little thing any way i need to copy the contacts over but i cant see what im doing i can get the blue tooth to work well i can turn it on but how do i connect it to other phone and send it contacts/ or how do i add my contacts to sim card

    I think the ´up´on this answer is for a phone with a 3x3 grid. Does anyone know the key sequence to get into ´contacts´ with a list menu?
    Thanks
    nj15 wrote:
    You will need to exert an effort here (Bluetooth transfers).
    But why don't transfer them to the SIM card memory instead?
    Middle button> Up> Middle button> 7 downs> Middle button> Middle button> Middle button> lastly middle button again. There you go
    Good luck

  • I need to fix a broken screen. iPhone 5 any ideas?

    I need to fix a broken screen. iPhone 5 any ideas?

    Contact Apple support at the appropriate number from: http://support.apple.com/kb/HE57 and ask about possible screen replacement being offered in the UK for the iPhone 5...in the US that is only done on the iPhone 5, and not at all Apple stores at this time.  Only certain ones are doing so.
    If that is not an option, an out-of-warranty replacement for the iPhone 5 is $229 in the US, convert to Pounds Sterling.

  • Help needed to configure 2730 classic on AT&T

    I've been speaking to Nokia and AT&T for two days trying to see if they could help me configure the new 2730 classic (bought in Asia) to work. It's on S40 and uses GSM data and packet data.
    No configuration I could find via public forums has worked so far. 
    One AT&T agent said that since GPRS is not available on the 2730, they can't help me manually put it in. But Nokia agent said AT&T should be able to send GPRS settings to me by sms (while another AT&T agent kept saying that since it's not a AT&T phone, they can't help me).  
    In Malaysia, I'd buy a sim card for less than US$5, and wap and mms settings are sent to me within the hour of putting in the sim card, why is it so difficult to do the same in this country??
    Is "global connectivity" a myth?  Is this a conspiracy to make people a buy new phone wherever they move? Or is there some truth to the fact that the 2730 is just not compatible with the system in the US? 

    Back in Nov 2009 when I posted the original message, I called AT&T  multiple times with the hope that someone there would bend the official policy and help me figure it out (since the phone was not bought from AT&T).
    I ended up finding this:
    http://www.configuremyphone.com/
    Their customer service was stellar and it cost very little. They sent me the necessary configurations so I could get on the internet. I don't have 3G still, but at least I could check my email 95% of the time that I tried.
    The bad news is, looks like "Configure my Phone" is no longer available. But maybe the parent company has other ways to helping consumers?
    Honestly... for the technie entrepreneurs out there, someone could start making money out of breaking down these walls that American phone companies impose on us. These companies pay lip service to global connectivity -- which only translates to consumer brand loyalty.

  • Broken screen but need to enable mass storage mode blind

    Hi there.
    I have a Curve 8900 with a broken screen. I have connected it to Blackberry Desktop Software to get anything I can backed up. It appears to backup all application & organiser things, but wont let me sync music, pictures, or videos.  Troubleshooter suggests that it's because I haven't enabled Mass Storage, but obviously I cant see the screen to see if prompts me to enable it. I have tried connecting my phone and randomly scrolling to see if I can click "yes" to enable it by chance, but it is just as likely that I have clicked "do not ask me again" and then clicked "no" as well.
    Can anyone guide me through the long way of going into settings and changing it manually, bearing in mind that I cannot see what is actually happening? Or does anyone know a way around it?
    Also, my menu was exactly the same as when I originally got it, with no added icons. I seem to remember 'settings' being on the last row but not at the very end. Thanks.
    UPDATE- ok i've worked out how to get into settings, but can someone tell me how to get to Enable Mass Storage mode from there? Like either how many rows to scroll down etc, or if pressing a letter takes me to the correct option, and then where from there?

    Also, my menu was exactly the same as when I originally got it, with no added icons. I seem to remember 'settings' being on the last row but not at the very end. Thanks.
    UPDATE- ok i've worked out how to get into settings, but can someone tell me how to get to Enable Mass Storage mode from there? Like either how many rows to scroll down etc, or if pressing a letter takes me to the correct option, and then where from there?

  • 2730 classic - buetooth upgrade for connection to ...

    i have major back ground noise when connecting new 2730 classic to blue tooth in car - blue tooth is genuine nokia ck100 (i think it is) - have been advised need the bluetooth upgrade of the internet but can't locate it - can someone please help

    you need to loadn latest firmware version 9.41 - to do this you can either download Nokia OVI suite and do the upgrade over the internet or on you rphone if you have internet access you can go Settings --- Phone ---Phone Updates ---Download Phone Software.

  • How do I use an external Monitor to access files on my iMac with a broken screen?

    I have an 20 inch desktop iMac with a broken screen. It is the files on the computer that I wish to recover, after that, I can be on my merry way. Unfortunately, VileVault was on (Not my choice), and for some reason, when I target the disc image of the broken mac with a new one, ONE of the accounts "appears" to be completely empty. All of the accouts were running FileVault, but only one (mine) failed to be transferred because it is "empty". I refuse to believe that my files are actually all gone, because theoretically there should be nothing wrong with the CPU itself, just the screen.
    Thus my goal is to use a monitor on my broken screen iMac and simply log in and access my files normally, and perhaps pull them out with a USB or something. I have a DELL monitor, and a DVI (The big hairy plug with screws I think) converter that works with my old iMac, along with the male/male DVI cord. However, when I hook it up, nothing happens. I have tried booting the old CPU while holding F7, and option as I read on a forum, and neither produced results.
    Does anyone have any ideas on how to 1. Get the monitor to simply show what's going on on the mac? or 2. Pull out my files through some other means?
    Thank you.

    If you have a second Mac computer, you may want to try to copy over as many files you can. One way is to use target disk mode.
    http://support.apple.com/kb/HT1661
    http://lowendmac.com/misc/06/0710.html
    You need to follow this procedure to recovering a filevault id.  Mac OS X 10.3, 10.4: FileVault - How to verify or repair a home directory image ...  http://support.apple.com/kb/HT2631?viewlocale=en_US  
    Robert

  • Can't access iPod Classic 160GB. NEED a backup.

    Hi, I've got a 6th gen. 160GB iPod Classic and I need a backup of the songs I've got in it.
    Basically what is happening is the same thing that happened when I installed Mavericks and tried to use my WD hard disk: I wasn't able to mount it nor repair it so, Disk Utility, told me to back up everything, erase and then restore the whole thing. (in this process I lost part of my music library, that's why I'm here)
    The problem lies in the fact that once, with my WD hard disk, I just clicked "ok" on the message that told me to follow those steps and the hard disk appeared on the desktop, thus allowing me to back up almost all I needed to but not with the iPod. I click ok and nothing happens.
    I tried rebooting it, I tried to put it in Disk Mode and I tried to connect it to other computers; always the same outcome.
    I am not searching for a permanent solution since in a week or less I'll have a new one (this one's headphone jack is ****** up and Apple will replace the whole device); all I want is to be able to access it as an external disk and recover what I have inside.
    Thanks a lot.
    P.S. I was using DeTune and everything was working fine, I disconnected the iPod to use it while running, got back, connected it again and now it doesn't work.

    Everything that was on your classic should also have been in your library, and that backed up to another drive. If you manually managed the device, and it was the only location holding your media, and it has become corrupted, there really isn't much hope. See Corrupt iPod classic. There may be a slim chance to recover media stored on it via disc mode if is isn't stored elsewhere, but if it won't mount, or has been reformatted, then the moment has probably passed.
    tt2

  • What is the cost of replacing iphone 5(broken screen, out of warranty) with a higher model maybe 5s? In India.

    Hi,
    Yesterday i dropped my phone and the screen got shattered. The phone is working fine. but the screen is cracked.
    After searching through the internet, i found out the following options:
    Getting Out-of-warranty Replacement.
    Getting the screen repaired by Apple Store.
    I am located in India and had  bought the phone from India only.
    So my questions are?
    What is the cost of getting an out-of warranty replacement for iPhone 5?
    Can i get a replacement for a higher model of iPhone( maybe 5s or upcoming iPhone 6). If yes, how much extra i'll have to pay?
    Is it possible to repair the broken screen in India? if yes, what will be the tentative cost?
    Thanks.

    ShadowDancer1000 wrote:
    All prices in US$.
    iPhone 5 screen replacement at an Apple store is ~$120.
    The price of getting the screen replaced in the US on the 5 is $150, and it is only available on the US as of now.
    iPhone 5 screen replacement at an non-official Apple retailer is $75-90
    Should the OP decide to go that route, he will be forfeiting future support from Apple, both in and out of warranty
    A new/refurb 16GB iPhone 5 from Apple is ~$400
    A used 16GB iPhone 5 on Craigslist or Swappa is ~$275-350
    Apple no longer sells the iPhone 5. They keep a number of units on hand for out of warranty service, which is $269 in the US.
    Buying from Craiglist (or on-line) is usually risky as the phones turn out to be not what they are advertised as.

Maybe you are looking for