2730 classic - buetooth upgrade for connection to ...

i have major back ground noise when connecting new 2730 classic to blue tooth in car - blue tooth is genuine nokia ck100 (i think it is) - have been advised need the bluetooth upgrade of the internet but can't locate it - can someone please help

you need to loadn latest firmware version 9.41 - to do this you can either download Nokia OVI suite and do the upgrade over the internet or on you rphone if you have internet access you can go Settings --- Phone ---Phone Updates ---Download Phone Software.

Similar Messages

Internet browser for nokia 2730 classic is no long...

My nokia 2730 classic is no longer browsing to the internet, what is wrong with it?

ovi store uses prefered access point wether you set it to be used or not.
Some operator have different access point for different purpose. Eg, prepaid customer have different access point and post paid customer have thier own too. And if you have unlimited data plan your sim may use different access point too.
One of my freind is using same model. When settings are configured mannually, network doesn't allow connection. Preferred access point which operator has sent, was meant for postpaid customer with data plan but my freind is using prepaid sim. So the problem is setting or ovi which is not smart enough to use defualt configuration, it tries to use preferred access point even it is set to 'no'
Better contact SP wether they can sent preferred access point for your need

Software update for Nokia 2730 Classic

Hello, I want to download the software for my Nokia 2730 Classic, but I cannot find it in this page : http://www.nokia.co.in/support/product_support/phone-software-update Only the Nokia 2700 Classic is listed and the Nokia 2730 is not listed. Please tell me what to do to get the software update for my Nokia 2730 Classic.
Solved!
Go to Solution.

Even if your phone is listed, unless you see the update available in the OVI_Suite you won't be able to do that. Connect phone to PC..Open OVI Suite --> Tools -->Software Updates and check.. If it shows any availability first back-up your data and then proceed for the update..

Trying to upgrade my ipad mini to ios7 get error 3014 .have tried most of suggestions , ipad has image asking for connection to itunes. and around and around I go

Trying to upgrade ipad mini to ios7. extracts software but wont restore it . error message 3014..ipad no longer working, just image asking for connection to itunes.Have tried all the troubleshooting suggestions I am capable of. ((((((

There is some troubleshooting for error code 3014 on this page : http://support.apple.com/kb/TS3694
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

HT4061 I tried to upgrade to IOS 6 and all I am getting when I am trying to re-start is a message for connect ti Itunes? Help

I tried to upgrade to IOS 6 and all I am getting when I am trying to re-start is a message for connect ti Itunes? Help

IPhone, iPod Touch, and iPad iOS Compatibility
     Device                                       iOS Verson
iPhone 1                                       iOS 3.1.3
iPhone 3G                                    iOS 4.2.1
iPhone 3GS                                 iOS 6.1
iPhone 4                                       iOS 6.1
iPhone 4S                                    iOS 6.1
iPhone 5                                       iOS 6.1
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1
iPod Touch 5                               iOS 6.1
iPad 1                                           iOS 5.1.1
iPad 2                                           iOS 6.1
iPad 3                                           iOS 6.1
iPad 4                                           iOS 6.1
iPad Mini                                      iOS 6.1
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Looking for Firmware upgrade for IPOD to play when connected to Onkyo RCVR ?

Onkyo support tells me their is a Firmware upgrade for my IPOD NANO that will allow it to play when connected to their reciever. Newer IPODS work fine. With my the Onkyo recognizes the IPOD, reacts like it is playing but does not play.

Connect it to your computer and upgrade it in iTunes.

Unlock Code for Nokia 2730 Classic

hello
I need to unlock my nokia 2730 classic from 3 network if I can unlok it will be paper wait only
thanks
sunny
Moderator's Note: A more appropriate subject was provided. Quoted message was removed as it did not provide relevant information to the query.
Solved!
Go to Solution.

hi mate,
you came to the wrong place. unlocking has nothing to do with us, but everything to do with your network carrier. you will need to contact 3 to get your handset unlocked and for the unlock code.
Moderator's Note: The subject was amended.

How to install operamini 5.1 in Nokia 2730 Classic

Respected all
I have Nokia 2730 classic with operamini 4.1. I want to install or upgrade it from 4.1 to 5.1. I had downloaded operamini 5.1 but when i install this shows an error "Unable to connect to the internet.Please cheak your settings."But i am surffing internet perfectly from operamini 4.1 which preinstalled on my phone. SO please help me
Thank in advance

the problem may b d/t the internet settings provided by the service provider. In India BSNL settings work fine for preinstalled opera mini on s40 phones but not for the one that we download.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Internet problems with Nokia 2730 classic

Hi
I recently bought a Nokia 2730 classic (on Orange PAYG). I'm able to browse most websites using the phone's browser. However, when I attempt to access Gmail, I get the following error: Secure connection not available. I get a similar error when trying to set up my email in the 'messages' section. I also get this error when I try to log in to Twitter - the common factor seems to be that they are https pages.
I'm also unable to use the Nokia Ovi store. Whenever I try to download anything, it will reach 35% before saying Download/Install Failed. I'm guessing that the two problems are related.
Does anyone know how I might be able to resolve either of these problems? Any advice would be greatly appreciated.
Cheers.

ovi store uses prefered access point wether you set it to be used or not.
Some operator have different access point for different purpose. Eg, prepaid customer have different access point and post paid customer have thier own too. And if you have unlimited data plan your sim may use different access point too.
One of my freind is using same model. When settings are configured mannually, network doesn't allow connection. Preferred access point which operator has sent, was meant for postpaid customer with data plan but my freind is using prepaid sim. So the problem is setting or ovi which is not smart enough to use defualt configuration, it tries to use preferred access point even it is set to 'no'
Better contact SP wether they can sent preferred access point for your need

Help needed to configure 2730 classic on AT&T

I've been speaking to Nokia and AT&T for two days trying to see if they could help me configure the new 2730 classic (bought in Asia) to work. It's on S40 and uses GSM data and packet data.
No configuration I could find via public forums has worked so far.
One AT&T agent said that since GPRS is not available on the 2730, they can't help me manually put it in. But Nokia agent said AT&T should be able to send GPRS settings to me by sms (while another AT&T agent kept saying that since it's not a AT&T phone, they can't help me).
In Malaysia, I'd buy a sim card for less than US$5, and wap and mms settings are sent to me within the hour of putting in the sim card, why is it so difficult to do the same in this country??
Is "global connectivity" a myth? Is this a conspiracy to make people a buy new phone wherever they move? Or is there some truth to the fact that the 2730 is just not compatible with the system in the US?

Back in Nov 2009 when I posted the original message, I called AT&T multiple times with the hope that someone there would bend the official policy and help me figure it out (since the phone was not bought from AT&T).
I ended up finding this:
http://www.configuremyphone.com/
Their customer service was stellar and it cost very little. They sent me the necessary configurations so I could get on the internet. I don't have 3G still, but at least I could check my email 95% of the time that I tried.
The bad news is, looks like "Configure my Phone" is no longer available. But maybe the parent company has other ways to helping consumers?
Honestly... for the technie entrepreneurs out there, someone could start making money out of breaking down these walls that American phone companies impose on us. These companies pay lip service to global connectivity -- which only translates to consumer brand loyalty.

IMac w/firmware upgrade not connecting thru chooser

Grade school iMacs (crt style) connect to library search software by selecting an alias on the local iMac that is for the program on the shared volume on the library Mac. This share is Read Only to everyone.
Any iMac running OS 9.x that does not have the firmware upgrade for OS X is connecting fine as they always have. Click the alias, brings up the chooser to do the STUDENT logon to the library share and begins the execution of the software on the local mac.
Some used iMacs that were added to the library have had their firmware upgraded for OS X. When these select the same alias - they get an error saying they do not have execution rights to the alias. But, if you manually go to the Chooser and log on to the libary share - then execute the actual program file - it works just fine.
So it appears that the firmware update has glitched the machine's ability to log on to the library share and execute the search program via the alias.
iMac iLamps (flat screen with round base)seem to work fine. Switch to OS9 via Classic, go through the Chooser and run the library search software. So seems our problem child(ren) is/are the CRT iMacs with the firmware upgrade.
Ideas? Anyone else run into this?
Thanks,

You didn't indicate how long the iMac was running without problems, before you decided to upgrade the memory. It's possible that the display's degraded picture quality is not directly related to the memory installation, since that procedure is relatively non-invasive on a slot-loading iMac. The board could have had a problem that would manifest itself after a sufficient period of ON time, that went unnoticed, prior to its sale on eBay. Sellers often buy pallets of computers in unknown working condition, that are stacked on top of each other and wrapped with plastic. Because the cases often have cosmetic damage, they're parted out. If the computer powers up and everything appears to be working fine, it's shut down and disassembled. If the unit were left ON long enough, perhaps any problems that it had (prior to being pulled from service) would eventually surface. I'd suggest trying the other board that you bought.

Using a family upgrade for AT&T.

So, I'm wanting to get an iPhone and the 4 is $50 cheaper at Best Buy, so I'd love to get it there. However, I'm using my sister's upgrade. I know you can use it at the AT&T store, but can I also use her upgrade for myself at Best Buy?
Solved!
Go to Solution.

When you are going through the upgrade process the screens list what lines you have and what ones are available for upgrades. All you do is tell them what lines upgrade you will be using and they will just use that lines eligibility to upgrade your phone.
All secondary retail stores such as Best Buy are connected to the carriers systems. Best Buy sees exactly what the carrier sees on their systems. Interfaces may be different but the information is the same. So any changes to the account made at Best Buy is making a direct change on the carriers computers in this case ATT.

My ipod classic 120gb won't connect to itunes.

I have tried everything and my ipod will not connect to itunes. I installed the newest version of itunes on my macbook air, then I restarted it. When I connect my ipod, the screen shows that it is connected and charged, and my ipod is showing up in the finder. Itunes shows the little spinning ball for about 30 sec, but when that is over nothing happens. How can I get my ipod to sync with itunes? This is a new computer and I have never tried connecting my ipod before today, but about a month ago I tried connecting my ipod to a different mac and I had the same problem. Could the problem be that newer versions of itunes and my ipod are not compatible?

You iPod looks ok, except for the Pending Sector of 8, and the high Start Stop numbers.
What is the iPod Software as shown in the Itunes summary page in your Mac?
My Suggestions
Try the Hard Reset first, it worked for some people,
After charging till full charge, at least 2 hours (preferably 4 hours)
Disconnect the iPod from the Mac
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Then try to connect and see it iTunes recognised it.
Also note that when you sync an iPod, do connect it directly to the body of the Mac, and not via any USB Hub or the keyboard USB hub. Also do not use any other USB devices.
Good Luck!

A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! Nothing seems to work! HELP! :/

A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! I have done this a few times and nothing seems to work! HELP! :/

Transfer all of your content to the computer:
Tunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
http://support.apple.com/kb/HT1848
Then try turning the device off and on again. I'd leave it off for 10-15 minutes, but that is up to you:
http://support.apple.com/kb/HT1430
If the item is still there, you may need to restore the device:
http://support.apple.com/kb/HT1414
Hope that helps . Worst case scenario, you may need to write into iTunes support to see if they can also help!!

Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

2730 classic - buetooth upgrade for connection to ...

Similar Messages

Maybe you are looking for