2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(15)T9, RELEASE SOFTWARE (fc5) ????
Hi ,
we are deploying IPT with voice gateway router 2811 having this IOS ....{ 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(15)T9, RELEASE SOFTWARE (fc5)}
My qusteion is that is this IOS support voice command .OR do i need to upgrade the IOS ??
Appreciate if some reply asap
Br,
Shib
Duplicate post #2.
Similar Messages
-
Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!! -
I had to erase my data to upgrade my iPhone software from an older version. I backed up first, but seem to have lost all my notes. Does anyone know how retrieve my old notes?
Is this the note you are referring to:
Not sure if this can help you.
I checked my notes. They are stored here:
MacintosHD/Users/MYHOME/Library/Containers/com.apple.notes/Data/Library/CoreData /ExternalRecords/
xxxxxserie.of.numbers.probably.yours.are.different/IMAPNote/_records/0/
If I go tot this window on finder and enter Time Machine I can go back and find old notes...
If so, am I doing this on my new hard drive on on the time machine? When I do this on the time machine, what is "my home"? Also, I am unable to find "containers".
If I go to users/jeff/library, then I see components, compositions, contextual, etc, but not containers.
Thanks -
Hi,
I'm working with a colleague who is using Mercury Playback Engine GPU Acceleration software on his PC version of Premier Pro CC. I am using a mac and have a trial version of Premier Pro CC. When I try to open a project file that he has sent me I get an error message-
"Missing renderer: This project was last used with Mercury Playback Engine GPU Acceleration (CUDA), which is either not available or not certified on this system. Mercury Playback Engine Software Only will be used."
When I click OK and locate the files I get a message saying "File format not supported".
Can anyone tell me what to do so that we can share project files?
Many thanks,
JessieShouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project? -
I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.
10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood. -
?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.
Error 1402 | Error 1406 | Acrobat, Reader
-
I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!
I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!
Nobody can help you with at least some system information....
Mylenium -
I need to connect to my work PC remotely from my macbook. I think I need the citrix software. But which version and what is the procedure?
Probably don't need citrix software. Is you computer in the office on LAN? Also, is the office computer setup for remote access? If it's windows then its going to be running Remote Desktop Protocol (RDP) natively. If it is in fact RDP that your windows machine at work is using then you need to download RDC for mac. I use it to connect to my work computer using RDP (don't tell the "Info Tech" dude at my office) and if your not too tech savvy I would suggest trying GOTOMYPC. It's alot easier to setup. But if you have experience in setting up remote access and your Windows office machine is connected through LAN and your IT TECH has allowed port forwarding then you should be just fine with RDP and it's free!!! But are you logging onto your actual computer at work or logging into the "SERVER" through your work machine... believe me it's two completely different things.
Basically, you'll need:
1. Physichal IP address of work computer. (If office computer is on WIFI this won't work) use IPCONFIG commands in command prompt
2. Port forwarding needs to be enabled by your IT Tech
3. Remote Desktop settings will need to be enabled on the office computer
4. Download RDC for mac (search google)
5. Type the physical IP address into RDC and hit connect... type in credentials and your all done.
We need lots more details though... there are many ways to connect remotely and if your office already has a system in place for remote access then any details would be helpful in determining which method will suit you best. If it's citrix just have your IT dude set it up. If you think you need citrix then good luck.... -
I just installed the latest version of iTunes to get the updates and new software on my iPod but it hasn't updated my iPod or put any of the new software on there either. How to I get the software to sync onto my iPod?
Are you sure it's not 6.1.6? If it is, that is the latest iOS version that will work on a 4th generation iPod Touch. Later versions require a 5G iPod which has twice as much RAM.
-
I just download a software called Mac Guard version 2.6 for protection of viruses is there is a such software ? thank you
It's malware. Follow the instructions linked below to remove it. The name is different from what the instructions show, but otherwise the procedure should be the same. If you entered your credit card number, cancel the card immediately.
How to avoid or remove Mac Defender malware -
i have an iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. also there is no update software tab under settings.please help me
If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone -
How to identify the required version of SAPINST and other SAP software?
I have a dell poweredge machine with quad processor .
On this we installed win 2k3 std x86
when I go to my computer and properties, it shows me intel processor, and win 2k3 x86_64
Then I download the IA64 verison and X86 versions of PI71 and related Oracle software.
I tried installing Oracle 10g IA64 and it showed me an error message
Then i installed I386 Oracle 10g and it installed successfully.
While installing Pi71 software, it started promptint me that Oracle software is not found.
So after a couple of hours of struggle and research< i installed AMD64 Oracle 10G and this got recognized by the PI71 software.
My questionw rt the abvoe is - when my computer says it has x86_64 version of OS on an intel xeon processor, how did the AMD64 got into picture?
So how to correctly identify which version of SAP software to download?
Please advise - I am novice regarding OS and related issues...
Thank,
VenIA64bit means Intel Itenium Processor.
AMD64=(X64bit) means Intel Core 2 Duo
This X64bit technologies invented by AMD so its called AMD64.
Regards,
Nikunj Thaker -
I upgraded my software to OS X version 10.9 and now my Canon MP145 scanner doesn't work, what should I do ?
Welcome to Apple Support Communities
There are two Applications folders: /Applications (in the root level of the hard drive) and ~/Applications (in your user folder).
If you have a look at the bottom part of the screenshot, you can see where Chess is stored, and it indicates that it's stored in /Applications, so you are looking for applications in the wrong folder.
Open a Finder window, go to Finder menu (on the menu bar) > Preferences > Sidebar, and mark Applications. Then, close the Preferences window and you will be able to access to the Applications folder in the Finder sidebar. Another option would be to go to View menu (on the menu bar) and type:
/Applications -
i can't install any application on my ipod. it needs a higher sofware version. how to upgrade it's software to 4.3? i have 2.1
khristianfromaparri wrote:
i can't install any application on my ipod. it needs a higher sofware version. how to upgrade it's software to 4.3? i have 2.1
You won't be able to update to 4.3. Depending on which version you have, you may be able to upgrade to 4.2.1. Check out the Apple articles below for info.
http://support.apple.com/kb/HT1353
http://support.apple.com/kb/HT2052
Stedman -
HT1338 I'm not able to update my software (Mac OS X version 10.6.8)
I'm not able to update my software (Mac OS X version 10.6.8), it gives me the reply "Software Update Server (172.22.5.7) is not responding" and there is nothing wrong with my internet connection. What should I do?
Try later. I just checked mine and got Software's up to date.
Maybe you are looking for
-
Reject call button does not appear on lock screen.
On the lock screen when I receive a call only slide to answer, remind me later and reply with a text options appear, there is no button to simply reject the call.
-
CUCM 9 & AS5850, Using MGCP Gateways not found in "Gateway Type" list...
I have an application where I need to control a large, AS5850 gateway using MGCP. CUCM version is 9.1, soon to be 10.0. The gateway is populated with CT3 cards. We have confirmed that the AS5850 does in fact support MGCP, however it is not listed a
-
Sharepoint browse portal from AD users issue
Dear All, for my sharepoint 2013, i am able to browse the portal from system admin user with no issue but not for AD users !! it keep showing windows security credentials required despite i put the correct credentials, what should i do? please help
-
2 node RAC: one 10gR2 node and one 11.2.0.3 node on Solaris 10.
Is it possible to have a mixed Oracle version 2 node RAC with 10gR2 database on one machine and 11.2.0.3 database installed on the other machine. Has anyone done this?
-
hi all What is Document Splitting Rule? regards ch.suresh