280R picld[71] reports disk errors - then says they are ok

Greetings,
I have a 280R with two internal drives that are not mirrored.
After the server has been online for a few hours, picld reports that both disks have failed. About 30 seconds later it reports that both disks are ok.
I have taken the disks, cpu's and memory and put them in an identical 280R and i get the exact same error messages.
During this period, access to the server is intermittent and most operations fail. (which makes sense, if communications is lost with the disk). However if it is a disk issue why would both fail simultaneously and come back on at the same time as well ??
Does anyone have any ideas ?
Thanks !

You moved the disks to another 280R, so that would seem to eliminate
the systemboard, power supplies, and cabling from hardware causes.
It also may have eliminated heat as causing intermittant disk operation.
I suggest you might have a software problem, not a hardware problem.
There have been PICLD patches, but they were rolled into the Solaris kernel years ago.
Run Explorer, and open a support case with Sun.

Similar Messages

Windows 7 no internet, tried downloading drivers from bootcamp and get an error mssg saying they are no longer on server. What to do?

Found many threads but all seem old. Tried downloading to a thumb drive from boot cafmp but get an error mssg saying that drivers are no longer available. Any help would be great.

Update
Two power cycles later and all working again. Not sure why, but hayho.

BIZARRE - iTunes tells me songs are not authorized, then says they are???

Purchased several songs & a couple albums. Burned a couple of the albums to CD to use in my car. Whatever songs I burned to CD now will not play in iTunes. Message appears saying +"This computer is not authorized to play "Song Title". Would you like to authorize it?"+ HOWEVER, if I then enter my password to try & authorize the song(s) a 2nd message appears: +"This computer is already authorized."+
Says I need to authorize songs, then says I can't authorize because it's already authorized. End result is I can't use anything I've purchased. What could cause this?

Not sure about the question below, but I got my issue taken care of by de-authorizing iTunes, then reauthorizing it. I did receive a response from Apple within 48 hours as well and they de-authorized all my accounts as well - Apple is apparently aware of this issue and it seems to be isolated to the new version of iTunes (8).

Reports getting error message that they are too big

Hi
When modifying a standard report and adding dimensions keep getting warning message indicating that the report is too big.
Is there a limit to the number of lines?
Regards
Neel

Hi Neel,
Administrators set a SPM UI property that will warn business user when the report they are trying to execute exceeds specified number or cells. This cell limit will depend on how your JAVA server is sized. Also SPM being an analytical application setting this too high may cause performance issue. Use the following menu path to get to this property
Administration -> Analysis Administration -> Application properties -> General tab -> Cell limit for Large Reports
Rohit

I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues

HT1386 Because of limited internet on my iphone 5, i download updates to apps thru ITunes and then sync them to my iphone. Lately, the apps download properly and the sync seems to go thru, but on my phone, they keep saying they are updating and it never

Because I have limited internet package on my att iphone 5, I update apps on my computer thru ITunes and then sync them to my phone. The downloads seems to go thru and then install. But when I turn on my phone, the affected apps continue to say they are updating and it never goes away. I do not have wifi but when I am connected, the apps don't update. Help!!!!

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

I upgraded to OS7 and then found a new gmail account on my iPad. It has put all my ntlworld emails into this new account and says they are all unread. How can I delete this unwanted account?

I upgraded to OS7 and then found a new gmail account on my iPad. It has put all my ntlworld emails into this new account and says they are all unread. How can I delete this unwanted account?

If his Gmail account is under the Gmail app and press the app until it wiggles then press the extra deleted. If this account is under the Apple email and then you can go to Settings, mail contacts calendars and then select the account and remove it.

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.

sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

Supposedly people are not receiving my texts. (says undeliverable) my daughter says they are coming from my email to her?? could i have possibly clicked something in error where i am sending via the wrong messages? is anyone able to assist?

Ive been sending messages on my iphone 5s fine until about a week or two ago. now people are saying they are getting "message undeliverable" when sending me a message. (even when I send and go back to check, I don't even see the text I sent there) I may have accidently clicked something to change the way I send my messages. Any suggestions?

I know that one does, but should the SMS be turned off or on? Something had to have accidently been changed when I was going through it. ??

Why do some of my pictures say they are temporary items in my Iphoto library?

Why do some of my photos say they are temporary items?

There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

IPod screen shows no songs after sync, but iTunes says they are there

After syncing my iPod to my iTunes, the menu on the iPod shows no songs. iTunes says they are there and so does Winamp, but I can't see them by navigating the menu.
The only things that changed since my last sync are some ratings and a new playlist.
This has happened to me before. Usually it is resolved by rebooting my PC to make sure the iPod drivers are loaded. I tried rebooting my iPod (holding down Menu and Select), but that didn't do it either. I would like to avoid having to wipe the iPod and re-copy everything. And since this has happened before, it will probably happen again.
I can't upgrade my iTunes to the latest version because Apple stopped releasing W2k versions. Thanks in advance.
-Alan

I have that issue also. I ripped a few cd's, attached the ipod, synced it, but my libraries disappeared. "About" says there's 20+ gigs of something on there, but nothing in any menu. I scanned the ipod with Panda, no malware. I took the ipod to Geek Squad, and the Head Geek suggested reformatting from windows, and then reinstalling software with itunes. Did that, hour later, same situation. 20 gigs of nothing, even though itunes reported it had transferred over 6,000 mp3's. Ipod just isn't recognizing anything on it as music, but it worked fine up until the re-sync, and I hadn't done it for awhile, so I am now guessing there's a bug in the newest software, and it isn't a hardware issue at all.
On another note entirely, does anyone else find it strange that Apple's discussion page spell checker regards ipod and itunes as misspelled words?
Ed

All contacts saying they are not available

I cant understand why people are saying they are offline when I am sure they are on line. I am abroad and used it once but when I purchased the internet skype will not work correctly but I can still get on the internet so I know thats working. Any ideas?

Are you signed into the AppStore with the same Apple ID you used when you originally bought GarageBand and the in-app purchase? If yes, then contact the iTunes Store, see:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I have been trying to put music I bought on I tunes on my Samsung Note 2 phone but it won't play.I try to convert them to mp3 format so I can play them on my phone but it won't let me convert them because it says they are protected. Can anybody help me?

I have been trying to put music I bought on Itunes on my Samsung Note 2 but my media player won't play m4p files so I tried to convert the files to mp3 but I couldn't, because a message says they are protected files. I then tried downloading different media player apps to see if they would play them but had no success.Can anybody help with a solution to this problem?

First quit iTunes and look in your iTunes folder.
On Windows, the iTunes folder is in your My Music folder.
On Mac, the iTunes folder is in your Music folder.
Follow this path: iTunes > iTunes Media > Music >
Here there should be all your music folders. Open the folders containing the music that is not playing. Right click "get info" (mac) or right click "properties" (windows).
This window will tell you the file type. iTunes will play music in AAC, MP3, and Lossless, etc.
If the files are .wma you will need to convert them into ACC or MP3 format for it to play on an iPod. In iTunes, highlight the tracks that you want to convert, then on the menu bar, Advanced > Create AAC/MP3 version and the tracks will convert. Delete the old files.
If the file extenstion is anything like .exe .txt .rar then you don't have an audio file.

Referenced Images Say They are Referenced But Are Not.

Is anyone having the following problem? I have about 4500 images that were Imported into Aperture as Referenced. Have been working with them over the past month. Tried making a Web Journal recently and after exporting the pages, many of the images did not show up in the web pages although the caption did. I went back to my Album and went through the images. The ones that didn't show up in the web pages were very strange looking within the Album. As a thumbnail they looked fine but when I put the loupe on them at 100% it was obvious that they were some sort of small jpeg or something due to lots of jaggies and poor quality. Even though the Reference icon was supposedly fine, telling me it was online since it did not have a yellow warning label, for some reason Aperture was not accessing the original RAW file.
I now have hundreds of images I have to try and find in the Album that say they are referenced but really are not.
Prior to this web journal problem showing up Aperture had been showing me many of these files were not online even though the drive was definitely hooked to the computer and I was able to go to the same images via the Finder and actually see that they were there. One minute the overall project registered images offline, I would click on an Album and they would register as Online. Then switch back to the Project and amazingly they register as online. Back down to the Album and it tells me they are off line. Back and forth from project to album and a different icon 50% of the time. I knew something was up.
I eventually tracked down many of the images that said they were online but by reviewing them it was obvious they were not due to the jaggies I mentioned above. When I would find one like this I went to Manage Referenced Photos and reconnected the image even though it's telling me it is already connected. After doing this to many of the images I reproduced the web pages and they then showed up. I nearly had all the images showing up except for one that I must have missed in reconnecting so I went back to do just that. As I scrolled through the Album and the Web Journal, many of the thumbnails would turn gray and then finally an image would show up. This happened to dozens of images. I found the one that had not shown up in the last export of the web pages, reconnected it (even though it said it was connected) and then exported the web pages again. Unfortunately I was back to square one. Once again dozens of images were now not showing up in the export of the web pages again.
I just can't believe how buggy 1.5.2 seems to be. I thought maybe it was something to do with Repairing Permissions so I went and did all of that. Still no luck! Anyone else experience anything like this? I'm about ready to give up on this software.

Victor,
Yes larger hard drives will help but the day they are large enough to fit in a laptop with a professional photographers entire collection is a long way off and may never happen. There is no reason why Referenced files needs to be so difficult. Two quality programs that handled it with ease was RAW Shooter (now gone having been bought by Adobe) and Photo Mechanic which is superb for some tasks. For Aperture to have this many issues with referencing images is unacceptable and the market place will bear this out. I've quite using the program all together and have gone back to Photo Mechanic combined with IView and Photoshop. There's still room for an Aperture like product but Apple better get moving to make it work better. Microsoft just announced some of the upcoming IView capabilities that will be available next year. Adobe has CS3 and Lightrooom and I'm guessing Photo Mechanic isn't resting on it's heels. I really, really wanted to like Aperture and I worked with it day in and day out for nearly two months. As time went on the Referenced files just kept getting more and more unstable and I lost a ton of work due to it no longer being able to see some of those files.
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7)

280R picld[71] reports disk errors - then says they are ok

Similar Messages

Maybe you are looking for