2811 router flash / memory error on bootup

Hello
After a router reboot , found this on startup
Initializing memory for ECC
c2811 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled
Readonly ROMMON initialized
open: file "c2800nm-adventerprisek9-mz.124-9.T7.bin" not found
open(): Open Error = -1
loadprog: error - on file open
boot: cannot load "flash:c2800nm-adventerprisek9-mz.124-9.T7.bin"
c2811 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled
Readonly ROMMON initialized
open: file "/c2800nm-ipbasek9-mz.151-4.M9.bin" not found
open(): Open Error = -1
loadprog: error - on file open
boot: cannot load "flash:/c2800nm-ipbasek9-mz.151-4.M9.bin"
c2811 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled
Readonly ROMMON initialized
What does the message in BOLD means here. ?
Thanks
Regards

If the router is working fine then the output of show version would help identify what code version it is running. The output of show flash would be helpful in establishing what IOS image files are present in flash. And the output of
show run | include boot
would tell what images the router has been told to try to boot. One possible explanation for these symptoms is that the configuration has boot system statements for images that are no longer in flash. If that is the case then it would be easy to change the boot system commands to point to the images that do exist in flash and this error at boot time would be resolved.
HTH
Rick

Similar Messages

  • USB flash memory: "application not found" error

    When recently trying to use a USB flash memory stick I was getting an "f:\ application not found" error. I tried all kinds of fixes from Microsoft. Turns out it was caused by Lightroom.
    Since the memory stick had photos on it, my computer's Autoplay was trying to launch Lightroom. Problem is, Lightroom is listed as "Lightroom 4.0 64" in the Autoplay menu. I have Lightroom 4.4.  As far as I can tell, there's no way I can fix the incorrect "Lightroom 4.0 64" listing.  The solution is to remove Lightroom from any Autoplay options.
    This is the second such problem I've had with Lightroom.  The previous problem was right clicking on a photo file and trying to use the "open with" menu.  It worked fine when I had Lightroom 4.3.  After updating to Lightroom 4.4, it didn't work. Another Lightroom user found a workaround, which was to rename the Lightroom 4.4 folder back to Lightroom 4.3.
    These are both lazy Adobe oversights. You have to realize all the Windows functions that will be affected with an update and make sure they are updated as well. I spent half a day solving this latest USB flash memory error. Get your updating act together.

    You don't mention your OS or which version of Outlook you're using.
    For Windows, this may be helpful:
    http://www.winhelponline.com/articles/236/1/Unable-to-open-PDF-attachments-from-Windows-Ma il.html
    Noel

  • My printer is flashing 10.00.0 memory error, i have taken the cartridge out and replaced it,

    I am using an HP Laser Jet 2430 dtn printer.
    All was fine until a little bit ago and it is flashing memory error 10.00.0
    It advaised to take out the cartridge and replace it, I did and I am still getting the error, now says contact support.
    Any suggestions?

    Hello,
    Please follow the stepsfor reset as below:
    1. Press OK.
    2. Press the down arrow or the up arrow to navigate the listing, select Service Menu.
    3. Press OK to select the Service Menu  option, scroll down to select Restore Defaults and press ok.
    Although I am an HP Employee, I speak for myself and not for HP.

  • Flash Memory / Hard Drive failure

    HP 311-1000 NR
    Bought this computer new in 04/2010.  Have used it for nothing but internet and itunes.  Have used it maybe a total of 40 times in 18 months.  Hard drive storage being used was maybe 30GB out of 250GB.
    Turned on today, and got a black screen with error message "Flash Memory Error  Hard Drive Failure"
    Have not installed any new software in months. Had only been using the computer to visit Nike.com website the night before.
    Computer has run it's antivirus and tune-ups without any errors every time I turn it on.  No previous errors or freeze ups prior to this.
    Any advice? Is this simply a matter of having the flash memory replaced? Thanks for any time and help.

    we need to make sure that the HDD on the com works fine
    here is the helpful link
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&tmp_task=solveCategory&cc=us&dlc=en&la...
    If you hav windows 7
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Upgrading a router with flash memory

    Hallo Profs,
    I have to upgrade some 2500, 2600 and 3600 routers in a Lab environment with new flash memory. Every router can get the image over the net from a TFTP server, but not in all configuration situations. All routers are two-bank-SIMM-based and all new IOS releases are bigger than the current versions and do not fit in only one of the current banks. Who has a idea to solve the problem?
    Thanks for help.
    mc_holl

    This case is settled. The problem is to use a direct connection between the router and the XMODEM partner device and not a reverse Telnet connection.

  • Aironet client utility load new firmware 59% Error Writting to Flash Memory

    always receive this error
    Error Writting to Flash Memory in 59%
    Thursday August 07 2008 17:34:30
    Start test
    `The radio's registry keys are OK.
    C:\WINDOWS\system32\drivers\PCX504.SYS File Size: 124416
    The radio driver has been installed.
    TEST 2:
    The second step is to check the radio insertion.
    The radio has been inserted.
    TEST 3:
    The third step is to check if the radio is turned on.
    Your radio is turned on.
    Current Active Profile Name: Unknown Vendor
    Auto Profile Selection is not enabled.
    TEST 4:
    The fourth step is to check your client adapter's association to an access point.
    ---------->Association Status: No receive packets
    Checking driver/firmware capabilities
    PROBLEM: Firmware version is too old.
    POSSIBLE REPAIR: Download new firmware to the radio
    or replace the radio.
    any help :(

    please any help?

  • Need to default 2811 router

    Hi all,
    Please bear with me.  I noticed several topics along the lines of password recovery for a 2811 router and do not mean to ask a redundant question.  I've followed the .pdf instructions and the router will reboot as normal every time.  I manage to get to the rommon 1> and when I initially entered the confreg command as outlined in the password recovery steps it would not recognize the confreg command.  I ended up typing a ? and all the avaialble commands listed... after the commands listed, the CLI would allow me to type confreg 0x2142 which resulted in a message "need to reload or power cycle" (or something to that effect).  After typing the reset, the 2811 reloads, but reboots to normal condition.  I tried the confreg 0x102 method and got the same result.  After several attempts, it seems like the procedure is not working.  So how can I simply default the router and start from scratch if the recovery procedure fails?
    Thank you!

    Hello
    Can you try the below:-
    thanks
    please rate all useful information
    Shut down the router.
    Remove the compact flash that is at the back of the router.
    Power on the router.
    Once the Rommon1> prompt appears, enter this command:
    confreg 0x2142
    Insert the compact flash.
    Type reset.   /you forget to type reset/
    When you are prompted to enter the initial configuration, type No, and press Enter.
    At the Router> prompt, type enable.
    At the Router# prompt, enter the configure memory command, and press Enter in order to copy the startup configuration to the running configuration.
    Use the config t command in order to enter global configuration mode.
    Use this command in order to create a new user name and password:
    router(config)#username cisco privilege 15 password cisco
    Use this command in order to change the boot statement:
    config-register 0x2102
    Use this command in order to save the configuration:
    write memory
    Reload the router, and then use the new user name and password to log in to the router.

  • 2811 router boot problem

    HI
    I have 2811 router when i boot the under following error message comes. comes in roomon mode . I upgrade IOS but same problem arise.
    Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(3c), RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2006 by Cisco Systems, Inc.
    Compiled Sat 07-Jan-06 04:34 by alnguyen
    Image text-base: 0x400A1678, data-base: 0x42D00000
    ****** ERROR detected on PCI0 Bus
    ****** Try RESEATING all modules in the system
    ****** pci0_int_cause 0x00000040,
    ****** pci0_err_addr 0x30B08038, pci0_err_cmd 0x00000006
    ****** PCI Master Read Parity Error
    %ERR-1-FATAL: Fatal error interrupt, reloading
    err_stat=0x0
    === Flushing messages (09:11:27 UTC Wed Jul 19 2006) ===
    Queued messages:
    09:11:27 UTC Wed Jul 19 2006: Interrupt exception, CPU signal 22, PC = 0x0
    -Traceback= 0x4025E7B8 0x4008B1C4 0x4025FAA4
    $0 : 00000000, AT : BFA00000, v0 : 00000000, v1 : 45620000
    a0 : 00000006, a1 : 00000000, a2 : 00000005, a3 : 000F4240
    t0 : 000186A0, t1 : 00000000, t2 : 34008000, t3 : FFFF00FF
    t4 : 4008E950, t5 : 00000000, t6 : 00008140, t7 : 45DAA238
    s0 : 45618048, s1 : 45660000, s2 : 44F10000, s3 : 452E0000
    s4 : 453D0000, s5 : 00000016, s6 : 00000000, s7 : 45DAA818
    t8 : 00000000, t9 : 00000006, k0 : 00000018, k1 : 00000000
    gp : 453E07EC, sp : 45DAA770, s8 : 45A8D120, ra : 4025E7A8
    EPC : 4025E7B8, ErrorEPC : 400011AD, SREG : 34008003
    MDLO : 000003E8, MDHI : 00000000, BadVaddr : 00000118
    Cause 0000000C (Code 0x3): TLB (store) exception
    -Traceback= 0x4025E7B8 0x4008B1C4 0x4025FAA4
    No warm reboot Storage
    *** System received a Bus Error exception ***
    signal= 0xa, code= 0xc, context= 0x4561a104
    PC = 0x4009483c, Cause = 0x20, Status Reg = 0x34008002
    System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)
    Copyright (c) 2005 by cisco Systems, Inc.
    thanks
    biplob
    it is hardware problem ????.
    can any one help to solve this problem.
    thanks
    Biplob

    Hi,
    For the problem mentioned see the cause below,
    ERROR: The system encounters a 'Bus Error' when the processor tries to access
    a memory location that either does not exist (indicating a software issue) or does
    not respond properly (indicating a hardware issue).
    TRY THIS:
    1. For 68000 Processor based platforms, carry out the following steps:
    Consider the output:
    "System restarted by bus error at PC 0x30EE546, address 0xBB4C4".
    Here the system is trying to access the address "0xBB4C4"
    a. Based on the address accessed by the router when the 'Bus Error' occurred,
    use the "show region" command to determine the memory location to which
    the address corresponds. If the address reported by the 'Bus Error' does
    not fall within the ranges displayed in the show region output, it implies
    that the router was trying to access an invalid address. This in turn indicates
    a Cisco IOS Software problem. Use the Output Interpreter to decode the output
    of the "show stacks" command to identify the software bug that is causing
    the bus error.
    b. If the address falls within one of the ranges in the "show region" output,
    it implies that the router was accessing a valid memory location, but the
    hardware corresponding to that address did not respond properly. This indicates
    a hardware problem. Find the memory address that the system is trying to
    access (for example in the above output, it is 0xBB4C4), and also the range
    of memory addresses between which this address falls. The hardware issue
    is most likely related to the corresponding component. If a new router has
    been installed, or if the router has been moved from one location to another,
    the memory chips may have become loose. It is recommended that you re-seat
    or firmly push the memory chips into the slot.
    For more information, see Troubleshooting Bus Error Crashes.
    2. For the RISC Processor based platforms, use the Output Interpreter Tool to decode
    the output of the "show stacks" command and identify the Cisco IOS Software
    bug that is causing the bus error.
    and even it is very much look like a bug in the software.
    Rate if it does,
    Rgs,

  • Acrobat XI Pro "Out of Memory" error after Office 2010 install

    Good Afternoon,
    We recently pushed Office 2010 to our users and are now getting reports of previous installs of Adobe Acrobat XI Pro no longer working but throwing "Out of Memory" errors.
    We are in a Windows XP environment. All machines are HP 8440p/6930p/6910 with the same Service pack level (3) and all up to date on security patches.
    All machines are running Office 2010 SP1.
    All machines have 2GB or 4GB of RAM (Only 3.25GB recognized as we are a 32bit OS environment).
    All machines have adequate free space (ranging from 50gb to 200gb of free space).
    All machines are set to 4096mb initial page file size with 8192mb maximum page file size.
    All machines with Acrobat XI Pro *DO NOT* have Reader XI installed alongside. If Reader is installed, it is Reader 10.1 or higher.
    The following troubleshooting steps have been taken:
    Verify page file size (4096mb - 8192mb).
    Deleted local user and Windows temp files (%temp% and c:\WINDOWS\Temp both emptied).
    Repair on Adobe Acrobat XI Pro install. No change.
    Uninstall Acrobat Pro XI, reboot, re-install. No change.
    Uninstall Acrobat Pro XI Pro along with *ALL* other Adobe applications presently installed (Flash Player, Air), delete all Adobe folders and files found in a full search of the C drive, delete all orphaned Registry entries for all Adobe products, re-empty all temp folders, reboot.
    Re-install Adobe Acrobat XI Pro. No change.
    Disable enhanced security in Acrobat XI Pro. No change.
    Renamed Acrobat XI's plug_ins folder to plug_ins.old.
    You *can* get Acrobat to open once this is done but when you attempt to edit a file or enter data into a form, you get the message, "The "Updater" plug-in has been removed. Please re-install Acrobat to continue viewing the current file."
    A repair on the Office 2010 install and re-installing Office 2010 also had no effect.
    At this point, short of re-imaging the machines (which is *not* an option), we are stumped.
    We have not yet tried rolling back a user to Office 2007 as the upgrade initiative is enterprise-wide and rolling back would not be considered a solution.
    Anyone have any ideas beyond what has been tried so far?

    As mentioned, the TEMP folder is typically the problem. MS limits the size of this folder and you have 2 choices: 1. empty it or 2. increase the size limit. I am not positive this is the issue, but it does crop up at times. It does not matter how big your harddrive is, it is a matter of the amount of space that MS has allocated for virtual memory. I am surprised that there is an issue with 64GB of RAM, but MS is real good at letting you know you can't have it all for use because you might want to open up something else. That is why a lot of big packages turn off some of the limits of Windows or use Linux.

  • Memory Error Neo2 Pt 4*512 DDR 400 or even 333

    Ok, this board has started giving me a lot of problems. 1 week ago all was fine, and suddenly I started getting BSODs. Last friday the computer shut off after a BSOD, while I was just browsing the internet.
    Affter that it failed to start and gave a BSOD on every boot.
    Then it started automatically again. And woked well.
    On sat the system wont start and gave long beeps, indiicating memory error.
    4*512 Ballistix default spd.
    so I reset my BIOS, upgraded bios to 1.A ballistix edition, as syar suggested.
    Computer ran well / rebooted well.
    but when I did a cold start sunday morning I got long beeps again. Even resetting the BIOS did help. Got long beeps.
    I took 1 module out and the system started well. went into the bios and manually set bus to 333 rather than 400, default spd timings.
    Computer started well. I put the 4th module back in, and all worked well till I did a cold boot today, and back to continuos beeps.
    Now the only way the computer works if I just use 2 memory modules.
    I tried manual voltage, manual timings, spd timings, timings on crucial's site, voltage on crucials site. No luck.
    currently i am on 2*512 dimm 1-2, default spd and voltage and system seems to work.
    whats the prob ? Is my memory bad, which I am not too sure off, bcos I tried running 2 modules at a time from the 4 matched pair, and tey seem to work.
    Only the all 4 wont work, and 3 in also gives problem.
    is this motherboard messed up ?
    bcos I am really thinking of switching to a diff platform as since day 1, less than 1 month ago, this mobo is giving me probs with X2 dual core.

    https://mywebspace.wisc.edu/phora/web/cpuz.htm
    Alright, I updated the BIOS to the latest beta, modded by side effect.
    put back the 4 modules in, and they are running now
    2-2-2-7 DDR 400 2.8V
    though the HT is 3x unlike all previos times when it was 5x...anything to do with the probs ?
    anyways, I still dont know how long this config will last, for I have has successful bootups in the past, but they end up failing later.

  • Can I install Windows ON a flash drive or on flash memory?

    All over the internet I see questions from people wanting to install Windows from a USB flash drive with varying results, but my question is different.  I want to install Windows ON removable flash memory.  I would like to purchase a MacBook Air, but would like to also continue making use of Boot Camp without taking up too much of my limited hard drive space.  I've found fast 3.0 USB sticks and flash cards that would be nice, but can they be treated as a partition in order to install and run Windows?

    Ignoring the fact that Windows doesn't really support booting from removable media (you might be able to force it if you are willing to build a custom installer), I can think of another reason you wouldn'r want to consider this.  Windows is notorious for heavy usage of the swap file, and I believe I recall reading one report where someone had managed to install Windows to a flash drive, and within 30-60 minutes, the OS had written to the swap file so much that the flash memory was beginning to fail.  Remember that each time you write to flash memory, it cases a small amount of damage to the memory, and after a significant number of writed, it will fail.  Regretfully, the Woindows swap file will cause this threshhold to be reached very quickly, and then you start getting write errors...

  • I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

    I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • Out of Memory error on some PDF's, not all PDF's.

    Hi there,
    I have read most of the posts in the forums that relate to 'Out of Memory' issues with PDF's and I have to say that there is still no solution that I have found.
    I have tried reinstalling Adobe Reader, Flash Player and tried clearing my Temp Files. None of these fixed the issue.
    The PDF's that receive this memory error are downloaded off a CMS website that has many offices and logins. Only one office is experiencing this out of memory issue so we know that it is not an issue with generating the PDF's on the CMS website, otherwise all the offices and logins would have this issue, since they use the same system.
    I am an admin of that CMS website and even I receive the same out of memory issue when I try and view the PDF's from that office, as the customer does.
    When we open these PDF's with another PDF reading program, the PDF's open fine. So that tells me that the issue lies with Adobe Reader and not the PDF file itself.
    These PDF files that are receiving the error about 1MB-4MB, so they are not large.
    Could you please tell me the solution to this out of memory error as we may lose a customer because your product is producing an error that does not seem to have been fixed after years of being reported by your customers.
    Thanks.

    As an Adobe Reader XI user, if I may put my two cents in, that "Out of Memory" problem is not with the Adobe Reader XI application, which was installed on our computers! I think, the problem is with how the PDF documents, which we were trying to open, were generated (or regenerated).
    I remember I was able to open my old credit card statement online without any problem and now I am not able to open the same old statement (out of memory) because it could have been regenerated! In fact, I could not open any of my credit card statements (old or new) on this specific credit card web site, which makes me believe those statments were regenerated or somthing with some new Adobe software.
    As others mentioned, even I'm able to view other PDF documents without any problem.

  • ORA-27102 Out of Memory Error

    Hi, I am installing Oracle 11g 64 bit in my server which is having windows server 2008 R2, and 64GB RAM. The software is installed successfully but while database creation it hangs at 2% progress copying database files. At this moment the full 64 GB memory gets consumed by Oracle installer and out of memory error flashed.
    Also i got some memory error report on oracle website as follows, but I am unable to find how to solve this problem
    *5.2.4 ORA-27102 Out of Memory Error*
    When creating a database on a computer with large physical memory, Oracle Universal Installer or Database Configuration may display an out of memory error.
    Workaround:
    Select the Advanced Installation type during installation, or run Database Configuration Assistant after a software only installation and reduce the memory allocated for Oracle based on the shared memory settings for your operating system.
    This issue is tracked with Oracle bug 9811726.
    Please help me.

    This is the dbca log file->
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.781 IST ] [Utils.getLocalHost:356] Hostname retrieved: MIPAS-SERVER, returned: MIPAS-SERVER
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.781 IST ] [WindowsSystem.dorunRemoteExecCmd:2061] WS: Calling windowsNative with cmd: C:\Windows\system32\acfsutil.exe
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.797 IST ] [WindowsSystem.dorunRemoteExecCmd:2064] WS: WinNative returned: false
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.812 IST ] [CmdToolUtil.doexecute:374] nativeSystem.runRemoteExecCmd failed. Command = C:\Windows\system32\acfsutil.exe arguments = [info, fs, /o, ismountpoint, Y:\] env = null error = PRKN-1014 : Failed to execute remote command "C:\Windows\system32\acfsutil.exe" on node "MIPAS-SERVER".executable doesn't exist
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.812 IST ] [OFSUtil.doIsACFSPartition:298] CmdToolUtil execute failed. boolean result = false
    PRCT-1114 : Execution of acfsutil command failed on node localnode for location Y:\
    PRCT-1011 : Failed to run {0}, PRKN-1014 : Failed to execute remote command "C:\Windows\system32\acfsutil.exe" on node "MIPAS-SERVER".executable doesn't exist
         at oracle.cluster.deployment.ClusterwareInfo.do1_isOFSPartition(ClusterwareInfo.java:1646)
         at oracle.cluster.deployment.ClusterwareInfo.do_isOFSPartition(ClusterwareInfo.java:1540)
         at oracle.cluster.deployment.ClusterwareInfo.isOFSPartition(ClusterwareInfo.java:1505)
         at oracle.sysman.assistants.util.hasi.HAUtils.isACFSFileSystem(HAUtils.java:1961)
         at oracle.sysman.assistants.dbca.backend.Verifier.checkIfACFS(Verifier.java:1948)
         at oracle.sysman.assistants.dbca.ui.DatabaseAreaPage.validateStorageDest(DatabaseAreaPage.java:675)
         at oracle.sysman.assistants.dbca.ui.DatabaseAreaPage.validate(DatabaseAreaPage.java:1187)
         at oracle.sysman.assistants.util.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:214)
         at oracle.ewt.wizard.WizardPage.processWizardValidateEvent(Unknown Source)
         at oracle.ewt.wizard.WizardPage.validatePage(Unknown Source)
         at oracle.ewt.wizard.BaseWizard.validateSelectedPage(Unknown Source)
         at oracle.ewt.wizard.BaseWizard.doNext(Unknown Source)
         at oracle.sysman.assistants.util.wizard.WizardExt.doNext(WizardExt.java:265)
         at oracle.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
         at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
         at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
         at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
         at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
         at oracle.ewt.button.PushButton.activate(Unknown Source)
         at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
         at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Component.java:5282)
         at java.awt.Container.processEvent(Container.java:1966)
         at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
         at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
         at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
         at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
         at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
         at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Component.java:5517)
         at oracle.ewt.lwAWT.LWComponent.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Component.java:5282)
         at java.awt.Container.processEvent(Container.java:1966)
         at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
         at oracle.ewt.event.tracking.GlassMouseGrabProvider$Proxy.processEventImpl(Unknown Source)
         at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
         at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Component.java:3984)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3819)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1791)
         at java.awt.Component.dispatchEvent(Component.java:3819)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    Caused by: PRCT-1114 : Execution of acfsutil command failed on node localnode for location Y:\
    PRCT-1011 : Failed to run {0}, PRKN-1014 : Failed to execute remote command "C:\Windows\system32\acfsutil.exe" on node "MIPAS-SERVER".executable doesn't exist
         at oracle.cluster.cmdtools.OFSUtil.doIsACFSPartition(OFSUtil.java:300)
         at oracle.cluster.cmdtools.OFSUtil.isOFSPartition(OFSUtil.java:260)
         at oracle.cluster.cmdtools.OFSUtil.isOFSPartition(OFSUtil.java:236)
         at oracle.cluster.deployment.ClusterwareInfo.do1_isOFSPartition(ClusterwareInfo.java:1642)
         ... 51 more
    Caused by: PRCT-1011 : Failed to run {0}, PRKN-1014 : Failed to execute remote command "C:\Windows\system32\acfsutil.exe" on node "MIPAS-SERVER".executable doesn't exist
         at oracle.cluster.cmdtools.CmdToolUtil.doexecute(CmdToolUtil.java:379)
         at oracle.cluster.cmdtools.CmdToolUtil.execute(CmdToolUtil.java:339)
         at oracle.cluster.cmdtools.CmdToolUtil.doexecute(CmdToolUtil.java:271)
         at oracle.cluster.cmdtools.CmdToolUtil.execute(CmdToolUtil.java:233)
         at oracle.cluster.cmdtools.OFSUtil.doIsACFSPartition(OFSUtil.java:294)
         ... 54 more
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.812 IST ] [Verifier.checkIfACFS:1955] Y:\orcl1 is ACFS :false
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.844 IST ] [Verifier.setOradataDest:4897] setOradataDest:dfDest=Y:\orcl1
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.844 IST ] [TemplateManager.updateDatafileDestination:2081] updateDatafiles:datafileDir=Y:\orcl1
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.953 IST ] [TemplateManager.updateDatafileDestination:2225] From template, RedoLogGrName=1
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.968 IST ] [TemplateManager.updateDatafileDestination:2240] new file name redo01.log
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.968 IST ] [TemplateManager.updateDatafileDestination:2225] From template, RedoLogGrName=2
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.968 IST ] [TemplateManager.updateDatafileDestination:2240] new file name redo02.log
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.968 IST ] [TemplateManager.updateDatafileDestination:2225] From template, RedoLogGrName=3
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.984 IST ] [TemplateManager.updateDatafileDestination:2240] new file name redo03.log
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.984 IST ] [DatabaseAreaPage.validate:1295] Storage Attribute OMF Mode false
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.984 IST ] [DatabaseAreaPage.validate:1296] Storage Attribute OSM Mode false
    [AWT-EventQueue-0] [ 2012-09-27 13:30:00.984 IST ] [DatabaseAreaPage.validate:1297] set omf param false
    [AWT-EventQueue-0] [ 2012-09-27 13:31:37.564 IST ] [DatabaseRecoveryAreaPage.invokeFileDialog:569] after setDrives
    [AWT-EventQueue-0] [ 2012-09-27 13:31:37.564 IST ] [DatabaseRecoveryAreaPage.invokeFileDialog:595] Before runDialog
    [AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
    [AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
    [AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
    [AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
    [AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [PluggableTablespacesTabPage.configureSampleSchema:256] PluggableTablespaceTabPage::->configureSampleSchema()
    [AWT-EventQueue-0] [ 2012-09-27 13:32:37.686 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
    [AWT-EventQueue-0] [ 2012-09-27 13:32:37.686 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
    [AWT-EventQueue-0] [ 2012-09-27 13:32:37.686 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
    [AWT-EventQueue-0] [ 2012-09-27 13:32:37.686 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
    [AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
    [AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
    [AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [PluggableTablespacesTabPage.onSampleSchemaStateChange:277] Tbs Name: EXAMPLE
    [AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [PluggableTablespacesTabPage.onSampleSchemaStateChange:278] Datafile Name: example01.dbf
    [AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [PluggableTablespacesTabPage.addTransportableDatafiles:230] PluggableTablespaceTabPage::->addTransportableDatafiles()
    [AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [PluggableTablespacesTabPage.configureSampleSchema:256] PluggableTablespaceTabPage::->configureSampleSchema()
    [AWT-EventQueue-0] [ 2012-09-27 13:33:00.847 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
    [AWT-EventQueue-0] [ 2012-09-27 13:33:00.847 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
    [AWT-EventQueue-0] [ 2012-09-27 13:33:00.847 IST ] [PluggableTablespacesTabPage.configureSampleSchema:256] PluggableTablespaceTabPage::->configureSampleSchema()
    [AWT-EventQueue-0] [ 2012-09-27 13:33:27.289 IST ] [Verifier.processRawConfigFile:4031] StorageType == 0
    [AWT-EventQueue-0] [ 2012-09-27 13:33:27.289 IST ] [DatabaseOptionPage.doNext:273] processRawConfigFile=false
    [AWT-EventQueue-0] [ 2012-09-27 13:33:27.320 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:33:27.320 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:33:27.320 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [InitParametersPage.validate:228] InitParametersPage->validate: in SPFile condition
    [AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [InitParametersPage.validate:232] original spFileName with variables ={ORACLE_HOME}\database\spfile{SID}.ora
    [AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [Verifier.validateSPFile:5233] The SPFILE={ORACLE_HOME}\database\spfile{SID}.ora
    [AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [ClusterUtils.validateRawDevice:760] Inside validateRawDevice
    [AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [ClusterUtils.validateRawDevice:772] Device Exception
    [AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [ClusterUtils.isRaw:738] The handle is invalid.
    [AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [InitParametersPage.validate:340] InitParametersPage->validate: calling createUndoAttributes
    [AWT-EventQueue-0] [ 2012-09-27 13:33:32.411 IST ] [Verifier.processRawConfigFile:4031] StorageType == 0
    [AWT-EventQueue-0] [ 2012-09-27 13:33:32.411 IST ] [DatabaseOptionPage.doNext:273] processRawConfigFile=false
    [AWT-EventQueue-0] [ 2012-09-27 13:35:00.941 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:00.956 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:00.956 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.050 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.050 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.050 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.175 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.175 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.175 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.284 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.284 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.284 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.986 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.986 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:01.986 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.079 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.079 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.079 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.189 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.204 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.204 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.329 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.329 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.329 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.469 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.469 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.469 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.859 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.859 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:02.859 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.000 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.000 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.000 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.109 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.109 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.125 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.218 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.218 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.218 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.374 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.374 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.374 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.483 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.483 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.483 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.967 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.967 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:03.967 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.185 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.185 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.185 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.310 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.310 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.310 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.419 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.419 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.419 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.607 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.607 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:04.607 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:26.308 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
    [AWT-EventQueue-0] [ 2012-09-27 13:35:26.308 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:26.308 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:28.710 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [InitParametersPage.validate:228] InitParametersPage->validate: in SPFile condition
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [InitParametersPage.validate:232] original spFileName with variables ={ORACLE_HOME}\database\spfile{SID}.ora
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [Verifier.validateSPFile:5233] The SPFILE={ORACLE_HOME}\database\spfile{SID}.ora
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [ClusterUtils.validateRawDevice:760] Inside validateRawDevice
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [ClusterUtils.validateRawDevice:772] Device Exception
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [ClusterUtils.isRaw:738] The handle is invalid.
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [InitParametersPage.validate:340] InitParametersPage->validate: calling createUndoAttributes
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.524 IST ] [StoragePage.selectAndExpandItem:353] item=oracle.sysman.emSDK.client.dataComponent.dataDrivenTree.TreeParentNode[label=Storage,index=0]
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.602 IST ] [StoragePage.selectAndExpandItem:362] item.isExpanded=true
    [AWT-EventQueue-0] [ 2012-09-27 13:35:47.602 IST ] [StoragePage.selectAndExpandItem:373] selection.isSelected(item)=false
    [AWT-EventQueue-0] [ 2012-09-27 13:36:00.130 IST ] [RedoLogGroupsComparator.compare:73] val1=1 val2=2
    [AWT-EventQueue-0] [ 2012-09-27 13:36:00.130 IST ] [RedoLogGroupsComparator.compare:93] result=-1
    [AWT-EventQueue-0] [ 2012-09-27 13:36:00.130 IST ] [RedoLogGroupsComparator.compare:73] val1=2 val2=3
    [AWT-EventQueue-0] [ 2012-09-27 13:36:00.130 IST ] [RedoLogGroupsComparator.compare:93] result=-1
    [AWT-EventQueue-0] [ 2012-09-27 13:36:04.576 IST ] [RedoLogGroupsComparator.compare:73] val1=1 val2=2
    [AWT-EventQueue-0] [ 2012-09-27 13:36:04.576 IST ] [RedoLogGroupsComparator.compare:93] result=-1
    [AWT-EventQueue-0] [ 2012-09-27 13:36:04.576 IST ] [RedoLogGroupsComparator.compare:73] val1=2 val2=3
    [AWT-EventQueue-0] [ 2012-09-27 13:36:04.576 IST ] [RedoLogGroupsComparator.compare:93] result=-1
    [AWT-EventQueue-0] [ 2012-09-27 13:36:27.761 IST ] [DBCAVttgControlfileProxy.getVtoObject:123] DBCAVttgControlfileProxy: In getVtoObject function
    [AWT-EventQueue-0] [ 2012-09-27 13:37:51.243 IST ] [RedoLogGroupsComparator.compare:73] val1=1 val2=2
    [AWT-EventQueue-0] [ 2012-09-27 13:37:51.243 IST ] [RedoLogGroupsComparator.compare:93] result=-1
    [AWT-EventQueue-0] [ 2012-09-27 13:37:51.243 IST ] [RedoLogGroupsComparator.compare:73] val1=2 val2=3
    [AWT-EventQueue-0] [ 2012-09-27 13:37:51.243 IST ] [RedoLogGroupsComparator.compare:93] result=-1
    [TaskScheduler timer] [ 2012-09-27 13:37:52.232 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:37:53.489 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:37:54.536 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:37:55.800 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:37:56.206 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
    [AWT-EventQueue-0] [ 2012-09-27 13:37:58.499 IST ] [StoragePage.validate:995] StoragePage: In validate function
    [AWT-EventQueue-0] [ 2012-09-27 13:37:58.499 IST ] [Verifier.validateTemplate:2019] StorageType == 0
    [AWT-EventQueue-0] [ 2012-09-27 13:37:58.514 IST ] [CreationOptionPage.setSaveTemplateVisible:467] Setting save template visible = true
    [AWT-EventQueue-0] [ 2012-09-27 13:38:18.155 IST ] [DBCAWizard.onFinish:1134] m_bFinishClicked: false
    [TaskScheduler timer] [ 2012-09-27 13:38:18.170 IST ] [OsUtilsBase.getRegistryEntry:1021] hklmKey while getting registry entryHKEY_LOCAL_MACHINE
    [TaskScheduler timer] [ 2012-09-27 13:38:18.170 IST ] [OsUtilsBase.getRegistryEntry:1022] keyToSet while getting registry entrySYSTEM\CurrentControlSet\Services\OracleServiceORCL
    [TaskScheduler timer] [ 2012-09-27 13:38:18.170 IST ] [OsUtilsWindows.enumerateSIDs:428] imagepath c:\users\administrator\documents\product\11.2.0\dbhome_1\bin\ORACLE.EXE ORCL\bin
    [TaskScheduler timer] [ 2012-09-27 13:38:18.170 IST ] [Verifier.validateTemplate:2019] StorageType == 0
    [TaskScheduler timer] [ 2012-09-27 13:38:18.186 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:38:18.233 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:38:18.248 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:38:18.248 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:38:18.248 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:38:18.264 IST ] [Verifier.calculateRedoLogGroupFileSizes:3591] canonicalPath=Y:\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:38:18.264 IST ] [Verifier.calculateRedoLogGroupFileSizes:3591] canonicalPath=Y:\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:38:18.264 IST ] [Verifier.calculateRedoLogGroupFileSizes:3591] canonicalPath=Y:\orcl1\
    [TaskScheduler timer] [ 2012-09-27 13:38:18.264 IST ] [Verifier.getControlfFileSizes:3510] No. of Control files:=2
    [Thread-35] [ 2012-09-27 13:38:18.326 IST ] [UIHost.getHtmlSummary:1081] UIHost:getHtmlSummary: running createTemplateDocument NOT for SHOW_TEMPLATE condition
    [Thread-35] [ 2012-09-27 13:38:18.342 IST ] [UIHost.getHtmlSummary:1087] UIHost:getHtmlSummary: after running createTemplateDocument NOT for SHOW_TEMPLATE condition
    [Thread-35] [ 2012-09-27 13:38:18.342 IST ] [XSLConst.generateHeaderXSL:214] NLS:Template Name:= null
    [Thread-35] [ 2012-09-27 13:38:18.342 IST ] [XSLConst.generateHeaderXSL:219] Template Description:= Use this database template to create a pre-configured database optimized for general purpose or transaction processing usage.
    [Thread-35] [ 2012-09-27 13:38:18.404 IST ] [UIHost.getHtmlSummary:1117] UIHost->getHtmlSummary: start printing of transformed document
    [TaskScheduler timer] [ 2012-09-27 13:38:51.814 IST ] [Host.executeSteps:5039] Executing steps....
    [TaskScheduler timer] [ 2012-09-27 13:38:51.814 IST ] [Host.setUpForOperation:3625] setUpForOperation: Mode = 128
    [TaskScheduler timer] [ 2012-09-27 13:38:51.814 IST ] [OsUtilsBase.getBaseFromOrabase:602] oraBaseUtility D:\app\Administrator\product\11.2.0\dbhome_3\bin\orabase.exe
    [TaskScheduler timer] [ 2012-09-27 13:38:51.814 IST ] [OsUtilsBase.getBaseFromOrabase:611] cmds: D:\app\Administrator\product\11.2.0\dbhome_3\bin\orabase.exe
    [TaskScheduler timer] [ 2012-09-27 13:38:51.892 IST ] [OsUtilsBase.getBaseFromOrabase:616] baseLocation from orabase
    Oracle home environment variable not set
    [TaskScheduler timer] [ 2012-09-27 13:38:51.892 IST ] [OsUtilsBase.getBaseFromOrabase:641] orabaseLocation= null
    [TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
    [TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [InventoryUtil.getHomeName:111] homeName = OraDb11g_home4
    [TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getOracleHomeKeyImpl:979] getting home key for home name: OraDb11g_home4
    [TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getRegistryEntry:1021] hklmKey while getting registry entryHKEY_LOCAL_MACHINE
    [TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getRegistryEntry:1022] keyToSet while getting registry entrySOFTWARE\ORACLE\KEY_OraDb11g_home4
    [TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getBaseFromOrabase:602] oraBaseUtility D:\app\Administrator\product\11.2.0\dbhome_3\bin\orabase.exe
    [TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getBaseFromOrabase:611] cmds: D:\app\Administrator\product\11.2.0\dbhome_3\bin\orabase.exe
    [TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getBaseFromOrabase:616] baseLocation from orabase
    Oracle home environment variable not set
    [TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getBaseFromOrabase:641] orabaseLocation= null
    [TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
    [TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [InventoryUtil.getHomeName:111] homeName = OraDb11g_home4
    [TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getOracleHomeKeyImpl:979] getting home key for home name: OraDb11g_home4
    [TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getRegistryEntry:1021] hklmKey while getting registry entryHKEY_LOCAL_MACHINE
    [TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getRegistryEntry:1022] keyToSet while getting registry entrySOFTWARE\ORACLE\KEY_OraDb11g_home4
    [TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.copyFile:1499] OsUtilsBase.copyFile:
    [TaskScheduler timer] [ 2012-09-27 13:38:52.001 IST ] [OsUtilsBase.copyFile:1547] **write of file at destination complete...
    [TaskScheduler timer] [ 2012-09-27 13:38:52.001 IST ] [OsUtilsBase.copyFile:1582] **file copy status:= true

  • Out of memory errors

    I'm having problems starting 8i. When started from /etc/rc.d/
    init.d/dbora during bootup or manually by root, I get an out of
    memory error.
    If I start it from the dbadmin user (oracle), I either get the
    same out of memory error, or I end up with several hundred shell
    logins and the database still doesn't respond.
    This is RedHat Linux 6.0, kernel 2.2.5-22smp. Here is a sample of
    what happens when I get the out of memory error:
    Mem: 160448K av, 53488K used, 106960K free, 26264K shrd,
    6532K buff
    Swap: 656360K av, 0K used, 656360K free
    36328K cached
    Oracle Server Manager Release 3.1.5.0.0 - Production
    (c) Copyright 1997, Oracle Corporation. All Rights Reserved.
    Oracle8i Release 8.1.5.0.0 - Production
    With the Java option
    PL/SQL Release 8.1.5.0.0 - Production
    SVRMGR> Connected.
    SVRMGR> ORA-27102: out of memory
    Linux Error: 22: Invalid argument
    SVRMGR>
    Server Manager complete.
    Database "ORCL" warm started.
    null

    It turns out that the problem I was having with a large number of
    shell processes being created was due to the use of oraenv in my
    .bashrc file (so much for following the instructions!) It was
    calling itself recursively until the process limit was reached.
    However, even with this fixed, the out of memory error still
    exists.
    max (guest) wrote:
    : dan....
    : check your init.ora......
    Aside from comments, it has these lines, which were created by
    dbassist:
    db_name = test
    instance_name = ORCL
    service_names = test
    control_files = ("/u02/oradata/test/control01.ctl", "/u02/oradata/
    test/control02.ctl")
    db_block_buffers = 8192
    shared_pool_size = 4194304
    log_checkpoint_interval = 10000
    log_checkpoint_timeout = 1800
    # I reduced processes to see if it would help
    processes = 10
    log_buffer = 163840
    background_dump_dest = /u01/admin/test/bdump
    core_dump_dest = /u01/admin/test/cdump
    user_dump_dest = /u01/admin/test/udump
    db_block_size = 2048
    remote_login_passwordfile = exclusive
    os_authent_prefix = ""
    compatible = "8.1.0"
    : also check ulimit
    Here's ulimit -a:
    core file size (blocks) 1000000
    data seg size (kbytes) unlimited
    file size (blocks) unlimited
    max memory size (kbytes) unlimited
    stack size (kbytes) 8192
    cpu time (seconds) unlimited
    max user processes 256
    pipe size (512 bytes) 8
    open files 1024
    virtual memory (kbytes) 2105343
    Everything looks pretty large to me.
    : Dan Wilga (guest) wrote:
    : : I'm having problems starting 8i. When started from /etc/rc.d/
    : : init.d/dbora during bootup or manually by root, I get an out
    : of
    : : memory error.
    : : If I start it from the dbadmin user (oracle), I either get
    the
    : : same out of memory error, or I end up with several hundred
    : shell
    : : logins and the database still doesn't respond.
    : : This is RedHat Linux 6.0, kernel 2.2.5-22smp. Here is a
    sample
    : of
    : : what happens when I get the out of memory error:
    : : Mem: 160448K av, 53488K used, 106960K free, 26264K shrd,
    : : 6532K buff
    : : Swap: 656360K av, 0K used, 656360K free
    : : 36328K cached
    : : Oracle Server Manager Release 3.1.5.0.0 - Production
    : : (c) Copyright 1997, Oracle Corporation. All Rights Reserved.
    : : Oracle8i Release 8.1.5.0.0 - Production
    : : With the Java option
    : : PL/SQL Release 8.1.5.0.0 - Production
    : : SVRMGR> Connected.
    : : SVRMGR> ORA-27102: out of memory
    : : Linux Error: 22: Invalid argument
    : : SVRMGR>
    : : Server Manager complete.
    : : Database "ORCL" warm started.
    null

Maybe you are looking for