29 days! Initial time capsule backup!!!

I have 315GB to backup via Time Capsule. I have ethernet connected, Mac Pro to time capsule.
Question 1) How do I know it is using the ethernet connection? The app called "Network utility" says both ethernet ports are "active". "activity Monitor" says little cpu is being used and very, very slow "Network" xfer rate.
Question 2) Why so slow? In 4 hours it says it has moved only 1.68GB. A 1Gb ethernet port should move 315GB in about 42 minutes (maxport speed). Can the Mac software, Mac Pro and Time capsule, dumb it down to 29 days?
It took 8 hours to back up 20GB on my Mini Mac. So (315/20)*8 = 5.25 days. Even 5 days is slower then **** but 29days?
I believe that when I didn't have the ethernet connected time capsule said it would take 42 days.
What is going on? It still says 1.68GB moved across. It said that before typing this message.
Chuck

You cannot access root..
Just data as the share.. this is network disk.. not local.
I have created a folder "test" in the main share..

Similar Messages

HT1176 Initial Time Capsule backup on MacBook Pro that doesn't have an Ethernet port

I just got a 3TB time capsule and am trying to backup my MacBook Pro. The initial process is very slow, but my MacBook doesn't have an Ethernet port. How can I connect the time capsule to the MacBook Pro to make the initial backup go more quickly?

A very good investment to make would be......
Apple USB Ethernet Adapter - Apple Store for Business (U.S.)
Why Apple chose to leave off the most important port in networking is a mystery.

Trouble with initial Time Capsule backup

I have just installed Time Capsule, and attempted the initial backup. The initial backup always fails with the error message "disk image cannot be created". After this failure, the "Airport Utility" will not recognise the Time Capsule, although the Time Capsule continues with a green light and the internet connection still works through Time Capsule. I have to reset Time Capsule for "Airport Utility" to recognise it again each time the backup fails with the error message above. Any ideas on how to correct the error and do the intial backup?
Thanks

-New to Mac-
I switched this year after using WIN for years.
I cannot get my Time Capsule to work. I tried everything in the 'forums', re-booted several times, changed the name of the Capsule, re-set, unplugged, used paper clips etc. I thought MAC's just 'worked' too. Not so far. I'm confident I will get it working even if I have to call Apple but I thought I'd read the fixes here first.
I can see the drive in the finder. I have moved iTunes files over to the Time Cap so it's saving other files but I keep getting a 'unable to mount' message when I try to do a backup. Even deleted the 'sparse' bundle file (can't delete one of the files, 'bands' in use message) but still no worky.
Still convinced Mac is a better system. Just put off on not being able to backup my MacBookPro...Not to mention the 300 bucks for the Time Capsule...

Can you help me with initial Time Capsule backup?

I have been completing my first back up for the last 36 hours. It is stuck at 74GB out of 81GB and the status reads "cleaning up".
Can anyone share some advice?

Try https://discussions.apple.com/thread/4161307?start=0&tstart=0
Allan

Restoring an existing Time Capsule backup to a new HD

The hard drive on my 6 month old MacBook Pro failed inexplicably several days ago. After wasting half a day trying to repair the disk, I caved in and made an appointment at the dreaded "Genius" Bar.
They verified my suspicions; complete failure. They kept the laptop, ordered a new drive and two days later informed me it was fixed. I sat down and connected it to my Time Capsule with an ethernet cable. When I turned it on, it played through that now insufferable multicultural "welcome"-in-twenty-languages jam and I followed Apple's instructions +Restoring an existing Time Capsule backup to a new Mac+:
http://support.apple.com/kb/HT1177?viewlocale=en_US
My favorite step is #12: +Your Mac will check the Time Machine backup for a period of time.+ When that period was clearly going to be a while, I went on a run, came back 40 minutes later and...it had returned me to the initial post-willkommen-bienvenido-etc. screen where I get to choose a language. Okay, my bad for leaving it unattended. I started over at #2, and this time it only took about half an hour. It showed the folders on the Time Capsule, I selected all of them, and clicked Transfer.
Almost immediately, it dove back into the welcome song! Now, for the third time, I'm at step #12. It's been over half an hour, and still no sign of hope. Just the progress bar checking for backups.
Would they have installed Snow Leopard on my Leopard machine? I definitely told them what I had been running, but it seems like a plausible reason for the hang-ups.
Any advice would be much appreciated, thanks!

Amenity wrote:
Almost immediately, it dove back into the welcome song! Now, for the third time, I'm at step #12. It's been over half an hour, and still no sign of hope. Just the progress bar checking for backups.
Connect to your Time Capsule via Ethernet if at all possible.
After booting from your Leopard Install disc and selecting Utilities, select +Disk Utility+ and see if it can find the +sparse bundle+ containing your backups on your Time Capsule. You may have to join the network, etc., via the Airport icon in the menubar. If you can get the sparse bundle to appear in Disk Utility's sidebar, select it and do a +*Repair Disk+* (not permissions) on it.
Would they have installed Snow Leopard on my Leopard machine? I definitely told them what I had been running, but it seems like a plausible reason for the hang-ups.
That's fairly likely; it happens a lot, probably because most folks have upgraded and installing SL has become a habit. But it shouldn't matter -- as long as you're using your Leopard Install disc, it should work fine. Once the restore actually starts, the first thing that happens is your internal HD is erased, and everything is restored from your backups.
It's also possible that whatever was going wrong on your internal HD corrupted something critical in your installation of OSX, and the corrupted stuff was backed-up, and that's what's giving TM a problem. If nothing else seems to help, try restoring from a previous backup.

Can't Connect to My Time Capsule Backups, Please Help!!!

I have been using Time Machine/Time Capsule to back my data up for over a year. I bought a new MacBook Pro this morning. I did not want to use Migration Assistant to transfer everything over because there were many bugs and corruptions on my old disk and was scared that would all be transferred to my new machine. It was time for a fresh start.
I set up my new computer and transferred most of the files I needed via a flash drive. I am now trying to set up my MacBook Pro to connect to my Time Capsule backup disk via Time Machine, but once I enter Time Machine it does not allow me to go "back in time" to see all of my previous backups and restore points. There are some really important files I am trying to get to, but this computer isnt connecting to the Time Capsule backups. The old computer has already been completely reformatted, but it is still able to access the Time Capsule backups.
I have done some internet research and learned that Time Machine uses a computer's ethernet MAC address to allow access. There are some codes posted on various websites that allow to alter what Time Machine thinks you MAC address is so that you can access your backups with a new computer/different logic board. None of these Terminal workarounds worked for me. The Genius Bar and Apple Care couldn't help either.
I am hoping somebody can help me out. I understand I can use my old computer to get into Time Machine and retrieve what I need then transfer those to the new machine. But there must be a way to allow a new computer to fully access Time Capsule backups, but curiously, I can't find it. I rather have my new computer have full access because I am selling the old laptop and so I wont be able to use it to access my backups any longer.
Sorry for the long explanation, but I hope that gives someone all the facts required to both understand what I am saying and help me fix the problem.
-Amir

Right now it is just empty because I have unmounted and disconnected my Time Capsule. I'm trying a low-tech work around to see if this works, but much rather do it the "right way."
What I am doing is this:
(1) Use Migration Assistant to copy everything from the Time Capsule to the new machine (this is exactly what I was trying to avoid initially). Migration Assistant has been copying files for about 5 hours now (still not sure what is going to happen).
(2) Create a full backup on Time Capsule with my MacBook Pro now that it has everything from the Time Capsule on it.
(3) Do a fresh install of Snow Leopard.
(4) Hopefully, have the fresh start on my machine I wanted, but still have access to at least one archived copy of my old computer and files/folders.
Does this make sense? Basically, the new machine does not allow me to access the old backups. So I am handicapping the machine now by reverting to my old settings via Migration Assistant, will back that up, then start all over from scratch again but hopefully have the peace of mind that my files are not gone because I will at least have that one copy of all my old copies in a Time Capsule backup that the new machine can access.

Time Capsule backup permissions

Hey there.
I have 2 macs backing up to one 500GB Time Capsule. Backups work just fine and Time Machine works without a hitch. All in all, very satisfied.
However, I have a question about the permission set for the backup images for each computer. It seems that I can mount the backup disk image of the second mac and they can mount my backup. I checked the permissions on the backups, and "everybody" has read/write access, as does "unknown". I figure unknown is a system thing, but does "everybody" really need read/write access? Isn't this a security vulnerability? Did I perhaps do something wrong with the initial Time Capsule setup?
Thanks much.

Turns out that the mounted back disk (not the raw Time Capsule volume) has the backup folders, now I get it.
Anyway, I looked at those and am able to open them directly in Finder without going through Time Machine to add an ACL entry for me to read the necessary files using the "Get Info" dialog. It turns out that my old user id was 502 and my new user id is 501.
While I can get a few files that I need by manually adding a read & write ACL entry for myself, I can't change the owner on the files using chown, even as superuser. It keeps saying "Operation Not Permitted". I cant set the basic permissions with commands like chown 755 Library, either.
Any idea why? If I can't figure out how to set the own on all of the dirs in my home dir from various backups, I'll just have to try to get all my files that I need and erase the backup disk to start over, something I'm not really excited about.

Cannot restore from Time Capsule backup wirelessly to Mountain Lion Retina

I just bought a new 15" MacBook Pro Retina Display and a Time Capsule router. The Time Capsule has supposedly backed up my macbook for a few days but when I try a complete restore from the Time Capsule backup wirelessly, it fails. New to Apple but do remember"can't access time capsule" even though network works fine.
Any help appreciated !!!

See p.4 here - http://www.pondini.org/TM/Time_Capsule.html - and see if the Great Pondoni can help.
He's sure helped others in the past...
Clinton

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

Use external drive for Time Capsule backups AND file storage?

I have an external drive formatted by my MBP. I'm using it to store my iTunes music library and iPhoto pics. Can I use the drive for Time Capsule backups as well?

Yes, but that is not recommended. Storage and backup should be kept separate to reduce the chances of a disk failure. This is especially important because you cannot even partition a Time Capsule drive. Go get a separate drive for your storage needs. Get another drive for a second backup and use a different method of backup than Time Machine

Time Capsule backup for multiple users

I have my iMac setup so that each member of my family has their own account. I am the administrator. When I run a time capsule backup is it backing up their files as well or do I need to create a backup for their accounts.
If I create individual backups for their accounts will it backup the shared files like the applications or just files specific to their accounts? Is this something I need to control by selecting what files to exclude in the preferences
Time capsule seems great for simple backups but concerns me if I ever have a HD crash. It seems very difficult to restore a backup to a new mac if I ever have to do that. Does anyone else have this concern? I am considering buying another external drive and use SuperDuper to create full bootable backups at least once every 6 months or so.
Thanks,
Gil

It is much harder to check what Time Machine has backed up.. you can assume that everything currently needed to reproduce the same setup on another computer is there.
To double check you must spend a bit of time understanding both how Time Machine works and how to restore from it.
Read up a bit from Pondini's excellent KnowledgeBase of articles.
http://pondini.org/TM/FAQ.html
Q7-9 are highly relevant.
Also go back to the main page and read the main articles on how TM works.
I must also say at the moment, on Yosemite in particular, I would not fully trust Time Machine.
I encourage people to make a bootable clone using Carbon Copy Cloner for example to a USB drive. You do not need to do it continually but the clone makes for a much easier return to normal.. since you can simply change boot disks. It costs $40 and is excellent value.. there are others you can buy.. and I am not connected to CCC in any way.. other than I use it and been amazed at what a great piece of software it is.

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

Initial Time machine backup was interrupted

I interrupted my initial Time Machine backup. How do I reinstate the initial backup?

Turn off TM, erase the external with Disk Utility, turn on TM and re-select the external HD.

Problems with Full restore using Time Capsule backup???

For some reason my MacBook Pro recently crapped out completely, and I am trying to do a complete restore of the OS via a full backup I made with using Time Machine onto my Time Capsule disk, but I am running into some problems doing so and I was hoping someone might have some insight as to how I should deal with things at this point...
Here's where things get messy...
- I insert my Mac OS X 10.5 Installation DVD into my Macbook and boot from the drive, and I immediately choose the menu option to 'Restore from Time Capsule Backup'...
- After logging into my Time Capsule and then choosing the proper .sparseimage file to restore from, I click 'continue' and it brings me to the screen where I choose where I want to restore to (which in my case, is the one and only internal HD inside my Macbook Pro)
- The bottom of this window tells me that it's "Calculating space required to restore data..." but it simply hangs at the point with a spinning wheel indicating its still doing the calculating, but never actually presents me with the space required, not does it allow me to click continue to perform the restore?? I've allowed it over an hour to calculate the space required and it still just spins its status wheel...
This is where I am stuck at this point, and I have no idea how to get it to proceed to the next step to allow me to perform the restore??
Any suggestions would be greatly appreciated, as I will have no choice but to do a complete reinstall (including all apps and data) if I can't get the backup restored... Thanks!

I had the same problem when installing a new HDD in my Macbook. The solution I found was to reinstall Leopard onto the new HDD from the install CD, then reboot off the install CD once I had done this. I was then able to choose the 'Restore from Time Capsule' option and get my HDD to show up in the window.
A word of warning, once you have reinstalled Leopard and it starts asking you for all you info, as if for the first time to set up your computer, there is an option at the end of that process to restore your data from a Time Capsule backup. While this did restore all my files and so forth, it did not update any of the 'Apple' apps, i.e. iTunes, iPhoto, Quicktime, or the operating system itself, suggesting a 500Mb download via 'Software Update' to update the system. It was faster for me to reboot of the install CD and restore via the process outlines above. That way you get all your system updates included.
Not sure if this is the 'approved' method but it worked for me! The restore process took about 75 minutes for about 100Gb of data from my external backup drive connected to my Macbook via a Firewire cable.
Hope this helps!

Is it possible to recover the contents of a "Sent Mail" folder that was accidentally deleted? We have complete Time Capsule backups.

We lost the contents of a "Sent Mail" folder when our ISP asked us to delete and re-create the account in an attempt to solve a connection problem.
Is there any way to re-create these messages from stuff in the Library or from a Time Capsule backup?
Thank you.

Yes.
Open the Sent folder in Mail.
Go to the menu bar and ask to Enter Time Machine.
Go back in time until you find the messages you want.
Restore them.
Of course I am assuming your backup disk is connected, or you have adequate local snapshots.
All the gory details here:
Restore items backed up with Time Machine
charlie

29 days! Initial time capsule backup!!!

Similar Messages

Maybe you are looking for