2900 Series Router Shows Wrong Date in Logs

Hello All,
Router: 2911 SIP Gateway (C2900-UNIVERSALK9-M)
IOS Ver: Version 15.2(4)M3
When I run the "show ntp status" command it is showing the correct date/time in with the NTP data. But when I run "show logg" the SIP messages being logged are showing a time that is 4 hours ahead of the actual time.
*Current Time I'm writing this is 11:45'ish...
# show ntp status
Clock is synchronized, stratum 5, reference is 192.168.xx.x
nominal freq is 250.0000 Hz, actual freq is 249.9996 Hz, precision is 2**21
ntp uptime is 836292100 (1/100 of seconds), resolution is 4016
reference time is D74AE0C1.A5C9079D (11:44:01.647 EDT Tue Jun 17 2014)
clock offset is 1.4716 msec, root delay is 156.27 msec
root dispersion is 252.26 msec, peer dispersion is 17.29 msec
loopfilter state is 'CTRL' (Normal Controlled Loop), drift is 0.000001556 s/s
system poll interval is 512, last update was 427 sec ago.
#show logg
1268129: Jun 17 15:53:41.146: //543358/47CDDA800000/SIP/Msg/ccsipDisplayMsg:
As you can see the date and time of this last log message in the buffer is showing a time of "15:53:41". Which is about 4 hours ahead of the current time, which makes me think it's a timezone thing, but it looks correct in NTP status... Any idea why the correct time and time zone (*I'm in EST zone) is in NTP status, but incorrect in the log(s)?
Any ideas how I can fix this?
Any thoughts or suggestions would be much appreciated.
Thanks in Advance,
Matt

Hi,
https://supportforums.cisco.com/document/24156/router-log-timestamp-entries-are-different-system-clock-when-ntp-configured
Add the [localtime] option to the service timestamps log command. For example, if the current configuration isservice timestamps log datetime, issue this global configuration command:
router(config)#service timestamps log datetime localtime
router(config)#^Z (ctrl z to exit)
router#write mem
The times should now be synchronized between the system clock and the log message timestamps.
Thanks
"Please rate the post if found useful"

Similar Messages

2900 Series Router - Over 700 failed login attempts - How do I find the source IP?

There is a 2900 series router Version 15.0(1)M1, in our company, recently the logs show that there were over 700 failed login attempts to try and gain privelege level 15 access. Is there a way to see the source IP from the host that is attempting the logins?

There is a 2900 series router Version 15.0(1)M1, in our company, recently the logs show that there were over 700 failed login attempts to try and gain privelege level 15 access. Is there a way to see the source IP from the host that is attempting the logins?

Invoice table sold to party show wrong data

Dear All
While creating excise invoice in background sold to party show wrong data.
In invoice ship-to-party andsold-to-party display correct but when we check
in J_1IEXCHDR table ship-to-party and sold-to-party display same data.
After upgrading support packs this problem came.
Regards
Pyneri

Hi
Refer this
Re: can anyone tell me in which table is sold-to-party name stored
Regards
N Ganesh

Aggregate table showing wrong data

Hello Gurus:
I am working on an issue, where a report is showing wrong value for an aggregated fact table.
If I try not including it in query, then results work fine. But by default BI server is pointing to aggregate table ( which it should ).
So my questions are
1) Does Aggregate tables are refreshed automatically with DAC?
2) I know data is wrong in aggregate table. How do I verify?
3) How to make a particular report hit regular table instead of aggregate table?
Please let me know.
Thanks.
~Vinay

Alright. So I made some progress on this issue, HOWEVER it is still not solved.
1) Aggregated tables are refreshed daily with DAC. There is a script for that on server which is created using Aggregate Persistence wizard.
2) ONLY one column is showing wrong data. I have verified this using Toad. However I dont know why is it showing wrong data. Theoretically it should be fine.
3) this question is still same.
How to make a particular report hit regular table instead of aggregate table?
Please help me out.
Thanks.
~Vinay

Report showing wrong data

Hi Gurus,
When we are generating report in the answers in one column it is showing wrong data from where i have to start for this issue.
Thanks,
Rafi

Pull that column alone,run report, compare the results with your manual query, and also compare the physical query.
if all are good then try to add other column from any other dim and then do the same as above
repeat till you know the cause.
Pls mark if helps

Downloads with Safari show wrong date

Hi, this is my first post and I'm stumped.
When I download a file (i.e. PDF) via Safari on either my Imac or Macbook (4.03 and 4.02) both running Leopard 10.5.7 it shows up in my downloads folder with the wrong date: wrong year, month, and day.
When I download the same file with Firefox the download date is correct.
Does anyone have any suggestions to remedy this annoying problem? Thanks.

Ok. I just downloaded a PDF via Safari that shows the creation date as: 23/12/08 1:10 AM.
Same file downloaded via Firefox shows date correctly: today at 9:16 PM.
The date from Safari has been all over the map... 03, 07, 00 etc. all different.
Message was edited by: i-Mack

Time Series Graph Show Inappropriate Data for Continuous Analysis

Hi All,
I have marked Month as the Chronological Key in my BMM Layer but still I am unable to view the data correctly in my Time Series graph because it shows Inappropriate Data for Continuous Analysis at the time of creating the Graph. Can anybody help me out with the same.
Thanks

What data type is your key? The chronological key is required for the time series formulas (ago etc.).
The time series chart requires a date or datetime data type to work - perhaps a new column with the first of the month/period would help? Regards,
Robret

Icloud online cal shows wrong date?

the online icloud calender is showing the wrong date. events created on my iphone 4s for the saturday are moved to the friday ( day before) when i move them on the online calender back to the saturday they then move on the phone to the sunday so basicly the icloud online is a day behind. Any Help? Cheers

At icloud.com , click the cloud icon at top left in any application, then click your name at top right in the next pane. Set the time zone to what it should be.

Bridge CS5.1 metadata show wrong "Date Created". It is always June 1, regardless of file examined.

Bridge CS 5.1 metadata shows incorrect "Date Created". It shows June 1, no matter when the file was actually created.

smilin Mike wrote:
…The purge cache operations…
Try always to Purge the Cache through the Tools Menu in Bridge. The global Purge Cache has been broken for years, at least through Bridge CS4. Don't have CS5.
Wo Tai Lao Le
我太老了

Calendar on my 8310 shows wrong dates for November 2009

All of the calendar months are correct except November, 2009. Instead of starting on Sunday it starts on Saturday. Any clues on how to fix it?

My DVR manager show no dates at all on scheduled movies!
This was not the case before.
Can wsomebody confirm the same problem or is it only on my side?

My apple email address shows wrong dates and emails are lost

Hello,
Today I noticed my emails shows funny dates like 11/19/1393AP and some of my emails are erased.
I think it happend after my flash was used on another computer, not sure it it is virus or malware.
I am In Tanzania now with no access to an apple store. Need help any suggestion
Thank you

Incorrect date or time displayed in various applications

Adf.currentDateTime shows wrong date/time

Hi All,
i am using the expression "adf.currentDateTime" for one attribute in my VO. My server time is proper but when rendered on page, this field shows the date 9 hrs back.
Any inputs on this ?
thnks
Edited by: in the line of fire on Jun 15, 2011 12:06 PM

Hi,
sounds like the timezone setting in the WLS server is messed up. Is this happening with the integrated WLS in JDeveloper or a stand alone (remote) server ? In WLS you can set the timezone in setDomainEnv.cmd or setDomainEnv.sh in WLS_HOME\user_projects\domains\<domain_name>\bin
(on Windows)
set JAVA_OPTIONS=%JAVA_OPTIONS% -Duser.timezone=BST
(on Unix Based OS)
JAVA_OPTIONS=${JAVA_OPTIONS} -Duser.timezone=BST
Frank

Date Picker Calendar Show Wrong Date Information Dec/Jan 2014-2015

When using a Date Picker, the offered Date for January 1st 2015 is a Friday! It supposed to be a Thursday!
You can move to February, and return to January again, and it will correct itself.
This happens in Office 2007 and 2010
What's gone wrong?
IT will also offer the wrong December dates.
Is there a fix please?

Re: Bad date
Some remote possibilities...
Your computer's clock has an incorrect date
The wrong year is entered somewhere as the first day in 2016 is a friday.
You have the wrong date system selected 1900 vs. 1904 or vice versa.
You have a 3rd party (non MS) Date Picker that is programmed incorrectly.
You have Office 2013 (nothing seems to work there)
There are alternatives and I offer one for Excel...
a free excel add-in date picker ("Get Your Own Date")
(no ads, no trackers, no cookies, no registration)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2
Jim Cone
Portland, Oregon USA

Calendar app showing wrong date for iCal feed.

Has anyone else noticed that when an iCal feed publishes an event that is after 0000Z, but still on the previous date in local time, it's added to the calendar on the wrong day?
Example: Your phone is being used in Chicago (CST). An ical feed you subscribe to publishes and event for 0300Z on November 5th. That event should then actually be on November 4th at 2100 CST, however, the phone will enter the event with the corrected time of 2100Z, however, won't correct the date which should be on the 4th (CST = GMT -6 hours).

I have my Mac's calendar auto-adjusting to time.apple.com. After coming back from Asia, now my calendar shows that November 11th, 2014 is a Wednesday; it is supposed to be Tuesday!

EWA alert report for java system shows wrong data

Hi,
In our solman system, EWA alert reports are configured every week for all the production systems (both ABAP and JAVA). Recently oracle database was upgraded from 10g to 11g in all the production systems. The EWA alert report for ABAP systems is correctly taking the 11g database details and is suggesting parameter changes. Unforunately the EWA alert report for Java systems is still pointing to 10g database and is suggesting the parameter changes for 10g only but the systems are on 11g.
In SMSY, the database of the java systems is maintained as 11g only and not 10g. STill we are not sure where the data is being fetched from.
Please help me in finding the issue.
Regards,
Ragav

Hello,
iNote 1482818 would be iapplicable if not java checks are being made. You are not reporting no java checks, you are reportijng the check is being performed, but has the wrong value. When you updated the database dis you perform Solman_setup, Mnaaged system setup?
The reason I ask s that is what prepares the java side for EWA. For isntance if you had on old version of ST-SER such as 700_2008_2 then it does not know about Oracle 11.2....but that is on the ABAP side, you would need ST-SEr 701_2010_1 to
recognize ORacle 11.2 on the ABAP side.
So while I am not 100% sure in this specific instance, it seems logical that if the Java side isn't recognizing the Oracle Database version ( which means it is making this check) then you may need to run the Solman_setup, Mnaged system setup to pick up the ability to detect a new version of Oracel on the Java side.
It is certainly worth the try.
Regards,
Paul

2900 Series Router Shows Wrong Date in Logs

Similar Messages

Maybe you are looking for