[290x] MSI Gaming App error "The platform does not support this application."

Using the latest AMD Omega drivers, I am unable to launch the Gaming App and am presented with this error - "The platform does not support this application."
I have tried downloading Gaming APP 3.0.0.16.zip from another post on the topic but I am receiving the same error. The only other thing I've seen as a 'solution' is to install the drivers from the MSI support page for my card - however this is version 14.4 and is over 3 months old, I don't really think that's a viable solution.
Any ideas?
Thanks!

Quote from: JLio01 on 07-January-15, 11:55:18
Is your vga driver 14.12? Any other settings changed?
Do you have any other msi or vga software installed?
Can you do a fresh re-install OS and what's the language of your OS?
Yes, Catalyst Omega. No other software or hardware changes.
Yes MSI Afterburner. Have tried uninstalling and installing gaming app, have also not had it running when trying to launch MSI Gaming app. No joy there.
No I can't, that's not really an option for a piece of software like this which worked before but doesn't since the latest AMD driver updates.
Quote from: JLio01 on 07-January-15, 16:07:38
Since your motherboard is not the supported gaming series mobos, there might be something detected wrong with your card. The error message shown if neither motherboard nor vga is supported in Gaming App. I suggest use AMD Catalyst Clean Uninstall Utility to totally uninstall the current driver:
http://www.techspot.com/drivers/driver/file/information/16748/
and re-install the latest driver 14.12. I have no problem using Gaming App 3.0.0.16 with my R9 290X, hope you too.
I have never seen anything stating that you need a supported gaming series motherboard to use the MSI Gaming App - maybe for other features if it has any, but the gaming app I used when I got my card was a little box with a few options for the GPU on it. Tried uninstalling and reinstalling the driver already unfortunately, using both AMD CCUU and a second attempt with DDU. No change at all, the exact same error message.
But as I've said, the fact that there is more than one person reporting this and older drivers make the gaming app work, it's definitely a software ended problem on certain configurations. I have installed driver 14.4 now and can once again use the gaming app, just as someone with a different card and different motherboard has stated in another thread. xxhttps://forum-en.msi.com/index.php?topic=251885.0xx this solution however is not really acceptable.

Similar Messages

R9 290 Gaming - MSIGamingApp: The platform does not support this application

Hey guys,
I have a MSI R9 290X Gaming 8G and can´t use the gaming app.
Whenever I try to run the app, I get an error: The platform does not support this application
So I guess I have the same problem as the dude in that thread:
https://forum-en.msi.com/index.php?topic=179659.0
He had the same issue with the R9 290X Gaming 4G. The problem was, someone flashed a sapphire vbios on his new card.
So can someone check the attached vbios rom, whether it is the right one for my card and not also a sapphire rom or something else?
Thanks and regards.

I seem to have the same problem using the Live Update App itself. My card is MSI R9 270X Gaming and I use Windows 8.1 64bit.
S/N: 602-V303-03SB1311026767

MSI-Z77-G43A Live Update 6.0.021 The platform does not support this application

When trying to run Live Update 6.0.021 on MSI-Z77-G43A got message The platform does not support this application
OS Win 7 64

the more recent versions of live update have been buggy!
your not alone with this behaviour as alot of people have the same issue and it looks like a glitch with the program itself! it may be updated again just to fix the issue when MSI get to a solution!

The platform does not support this application, but does under other account

Okay the MSI Gaming App works just fine under my own account on my PC on which I am the administrator. So it isn't a driver related issue.
Last week I created a second account for my son as he also like to play some games but I dont want him messing up my account.
I wanted to start the MSI Gaming App on his account as my son was going to play a more graphic demanding game but the MSI Gaming App is only giving me the warning: the platform does not support this application.
I checked the Security and Permissions for Authentication they all set like they should which works fine for other software and applications.
Even when I try to run the app as administrator it keeps coming back with this warning.
Anyone got clue why? Maybe I'm overlooking something obvious but till now I still didn't get the MSI Gaming App to run like it should. Some help please.

Quote from: JLio01 on 11-December-14, 14:49:39
1. What's your App version?
2. What's the mobo/vga/specs of your son's pc?
First of all thanks for the replies and future replies.
1.
Version 1.0.0.18
2.
My sons has his own profile/account on my pc so the hardware config and installed drivers are exact the same. And on my profile the App is working fine. So it has nothing to do with mobo/drivers/vga/specs. I already had installed the App before I created his own profile. As administrator I added all the needed permissions to the MSIGamingApp Properties Security Tab. Like I did with all other software he is running on his profile and which are working just fine. For example Teamspeak, Mumble, Several games, MSOffice and so on. I even set the Permissions to Full Control like on my Administrator profile. At the Permission Entry for MSIGamingApp I let the permissions be inherited from the parent object my administrator profile.
If I would re-install and if during the installation windows would ask for whom the software should be accessible. I only would let Windows do exact the same as I did as administrator in the App Properties Security Tab. That the nice thing about being an admin. Create profile, set permissions and let users on your pc or network access software and applications already installed on the network. So that is why I find it weird this doesnt work.
Also running the MSIGamingApp as Administrator on his profile gives the exact same warning.
I do know how to add permissions to the security tab have been doing that several years for some job I had once.
I could use Afterburner maybe but I don't trust him yet with making changes in Afterburner.
The MSIGamingApp gives just enough controls OC-Gaming-Silent mode.
And in case of trying a re-install of the App anyone got an url for a new version?
Might have found it but it isn't on any MSI webpage.
I did found something on Guru3D but I'm not aloud to post external links.
Did found a url linking to a Torrent side but my Bullguard AV blocked this site instantly.
So a clean url would be nice so to say.
So weird I cant find this software on http://nl.msi.com/search/MSIGamingApp/product/1 or any other MSI site

I try to download firefox. After completion, the firefox icon is crossed out and when I double click, I get a message saying the architecture does not support this application. I have a g4 mac laptop with 10.5.8. Any suggestions?

hard drive died two weeks ago and had it replaced by an authorized dealer.
Previous to this disaster, I had firefox and had no problems.

The latest 9.0.1 version is not compatible with your ppc mac os.
Firefox 4 versions and later '''do not run on a PowerPC Mac''' and require at least OS X 10.5 and '''an Intel Mac'''.
see : [http://www.mozilla.org/en-US/firefox/9.0.1/system-requirements/ Firefox 9 System Requirements]
'''The latest supported version for your os is 3.6.25''' , you can download it from:
http://www.mozilla.org/en-US/firefox/all-older.html
see : [http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
[For older Macs that aren't supported in Firefox 4+ versions, if you like, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8]
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Error when trying to re-mount a VHDx (the version does not support this version of the file format)

Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
Maike

Hi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway!

Error -11040 Driver does not support this function- Informix SE db

Hello,
Weu2019re getting an error -11040 "Driver does not support this function" when trying to connect to an ODBC data source to an InformixSE database. This is with Crystal 2010 and 2008 on a Windows XP sp2 box. Weu2019re trying to use the ODBC(RDO) choice for a new connection.
The Informix ODBC driver has been loaded. We tried 3 versions, the 2.40 and 3.70(latest) ones from IBM, and one that I believe came with Crystal (CR xxxx). I tried turning on the ODBC trace file, but it didnu2019t write anything to the log. We are supplying the same log in credentials as with Excel.
   The Informix database we use is Informix SE (Standard Engine) v5.10 on separate machine running Unix (Aix) with the Informix-Net daemon running to handle odbc connectivity. We are able to connect from Excel to the Informix database.
I donu2019t know what ODBC function Crystal may be expecting from the driver that it doesnu2019t seem to support and how to tell Crystal to not need it.
Thanks,
Mike

Hi Mike,
According to the Platforms for DB support we only support these Informix data sources:
IDS (Informix Dynamic Server)     11.50       32 bit       64 bit        Linux               AIX                   Solaris
IDS          IDS Client 11.5                                     Direct     Direct     Not Supported     Not Supported     Not Supported
ODBC      IBM Informix ODBC SDK 3.50             Direct     Direct     Direct             Direct             Direct
ODBC      DataDirect ODBC 6.0 SP2 (10)      Direct     Direct     Direct             Direct             Direct
You may want to try the Data Direct 6.x drivers as a test.
CR in the .NET IDE is running under 32 bit mode so make sure you are using the 32 bit Client.
Don

"The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

The iPod software update server could not be contacted. the server does not support this version of itunes its saying

i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
Regards,
Brahma.

You need to update to the latest version of iTunes. Go to the apple and select software update.
i

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Try a reset:
- Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
If issue persists try:
- Another known working cable
- Check the charging port for any damage or debris
- You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

Script error (the object does not support the property or method of loaded0)

I am getting a script error each time I "run" my site from Dreamweaver (F12). It says something like:
"The object does not support the property or method of loaded0, code0, url https://apis.google.com" etc etc "Do you want to keep running the script?"
(I just get it in a different language, so sorry for the translation). What have I done wrong here?

I am using internet explore, with yahoo as my "startpage"
These two have different urls, the last one is the one I got today when I didn't have Dreamweaver open. I rarely use google.

My iTunes Store is configured to the Venezuelan store, and I can't purchase apps because the store does not support US cards. What should I do?

I sent an e-mail to the iTunes store support contact, but they keep saying that I must use a Venezuelan card.
In Venezuela, a person is limited only to use a maximum of 400 USD (that's four hundred US dollars) per year. I already used them all, but I want to purchase another stuff. I have a US Visa Debit Card, but my iPad says that the venezuelan store does not support my card.
So, I can't use my Venezuelan card because I already spent the complete 400 dollars, yet it won't let me use a US card.
Anyone knows how I can change my region to the United States?
Thanks!

And we would like to receive a clear statement about what you are really trying to do rather than rude responses from you to us fellow users who are indeed trying to address your issue.
Did you read this part of my reponse?
You must use a credit card that was issued by a bank in the country whose iTunes Store you wish to use, and the card must also have its billing address in that same country.
and
The reverse is also true; you cannot use a Venezuelan-issued credit card in the US iTunes Store (nor are you allowed to use the US iTunes Store from outside of that country).
How does that not address your issue?

I have a IMac 7.1 Intel and trying to download vidoes to an Ipad version 5.1.1 - i keep getting error's stating that the ipad does not support this version - any suggestions?

I have an Imac 7.1 intel and trying to download videos into an Ipad - I keep getting error messages that states not supported - any ideas?

What is a 7.1 intel?

I am trying to use sites on the internet which require Adobe Flash Player, but when I click on the free download, it says that Apple does not support this application, so I cannot use it. This stops me viewing quite a few interesting things. Any ideas?

I am trying to use sites on the internet which require Adobe Flash Player, and when I click for a free download it says that "it is not available for your device because of restrictions that Apple has put in place". Any suggestions on how to overcome this?

Flash is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices, something which they have never managed to do and which they have now given up on trying to do.
Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app).

I downloaded the newest version and there is a Circle with a slash through it over the firefox icon. When I click on it the message is the system does not support this version. How do I reinstall the previous version?

I updated firefox. When I did there was a circle with a slash (as in No!) across the firefox icon. I clicked on it to open the browser and the error message reads: the application firefox cannot be launched - 10661
How do I go to the previous version that worked just fine?

Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
http://www.mozilla.com/en-US/firefox/all-older.html
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/<br />
http://tenfourfox.blogspot.com/ <br />
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

[290x] MSI Gaming App error "The platform does not support this application."

Similar Messages

Maybe you are looking for