2960X LAN LITE VS LAN BASE

Please!
Differences between IOS LAN LITE vs LAN BASE but the 2960X
improvements in these IOS
Thanks

After configuring it -> the answer on the equipment - It is a WS-C2960-48TC-L running ios c2960-lanbasek9-mz.122-55.SE5.bin
SWHtest#sh ip arp inspection
Source Mac Validation      : Disabled
Destination Mac Validation : Disabled
IP Address Validation      : Disabled
Vlan     Configuration    Operation   ACL Match          Static ACL
    1     Enabled          Active
Vlan     ACL Logging      DHCP Logging      Probe Logging
    1     Deny             Deny              Off
Vlan      Forwarded        Dropped     DHCP Drops      ACL Drops
    1              0             12             12              0
Vlan   DHCP Permits    ACL Permits Probe Permits   Source MAC Failures
    1              0              0              0                     0
Vlan   Dest MAC Failures   IP Validation Failures   Invalid Protocol Data
    1                   0                        0                       0
But on the comparaison board , it says that "DAI " and even "IP source Guard " are not available for both lan lite and lan base 2960 . ( see document uploaded )

Similar Messages

Cisco 2960X LAN Base vs IP Base

We have few Catalyst 2960X with LAN Base, and all features, that you wrote are supported.

Hi,
I am trying to buy a Cisco switch and I have trouble defining if LAN Base supports these features :
IEEE 802.1x
Multiple Spanning Tree Protocol (MSTP)
IEEE 802.1AE MACsec on all down-link and up-link ports
IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) and
IEEE 802.1p QoS
IEEE 802.1Q VLAN,
Could you please advise ?
Kind regards,
Kushtrim
This topic first appeared in the Spiceworks Community

LAN Lite, LAN Base, IP Base, and IP Service Image of Switching.

Dear all,
Please kindly help me what is differenct between LAN Lite, LAN Base, IP Base, and IP Service Image of Switching.
Hope see all of your feedback soon.Thanks!
KIND Regards,
Siren

Here is a white paper on difference between LAN base, IP base and IP services. Note that LAN lite switches have different hardware and can't be upgraded to a more capable image.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-579326_ps10745_Products_White_Paper.html
This paper compares LAN lite vs LAN base for 2960:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/prod_presentation_c97-494780.pdf
Daniel Dib
CCIE #37149

LAN BASE and LANE LITE Software

Hi ,
I found this info in the Q&A for Catalyst 2960 Switches:
Q. What are the advantages of Cisco Catalyst 2960 Series Switches with the LAN Base software relative to Cisco Catalyst 2960 Series Switches with the LAN Lite software?
A. Cisco Catalyst 2960 LAN Base switches deliver intelligent services for branch offices and wiring closets. The LAN Base IOS software supports enhanced Layer 2+ security, quality of service (QoS), availability, and scalable management to enable new converged applications. Catalyst 2960 LAN Base switches include both 10/100 Fast Ethernet and 10/100/1000 Gigabit Ethernet connectivity in 8-, 24-, and 48-port configurations.
Cisco Catalyst 2960 LAN Lite switches are for entry-level branch office and wiring closet networks. They simplify the migration from nonintelligent hubs and unmanaged switches to a fully scalable and reliable network. The LAN Lite IOS software supports standard Layer 2 security, QoS, and availability while lowering the network total cost of ownership. Catalyst 2960 LAN Lite switches deliver 10/100 Fast Ethernet connectivity in 24- and 48-port configurations.
All Cisco Catalyst 2960 Series Switches have technical support service options available through Cisco SMARTNet® service. All come with a Limited Lifetime Hardware Warranty, and LAN Base and LAN Lite software updates are provided at no additional cost.
my question is about the text in red color, does that mean that if I ordered (WS-C2960-24PC-L) then all the Ethernet interfaces can work at the 10/100/1000 ?

Hello and good afternoon,
Here is the link to the model comparisons:
http://www.cisco.com/en/US/products/ps6406/prod_models_comparison.html
There are gig uplinks on the lan-lite products.
Is there a specific application, feature or functionality you are looking for? Can I assist you all in finding the right switch?
Kindest regards and best wishes for a great new year!
Andrew Lee Lissitz

Cisco 4900 switch LAN base to IP base IOS upgrade

Hi,
I have purchased WS-C4900-SW-LIC= for upgrading 4900 switch from LAN base to IP base IOS.
I have not received any PAK or installable license file. Only license agreement is provided by CIsco.
While upgrading do I need to install license file on switch?
Regards,
Andy

Anderson,
Contact the licensing team and request for an update using your PO/SO since you have not received the PAK.
Link: https://tools.cisco.com/SWIFT/LicensingUI/Home
Indeed we need to install the license file on the switch
First copy this license to the switch's flash memory using the copy command
and a TFTP server.
Note, while the dir bootflash: command now lists the file in the bootflash, it has
not yet been installed. The license install command must be used to install
the license.
Example:
4948# license install flash:license_name-ips
Please issue the following command and then reload the switch.
4948(config)#license boot level ipservices
4948(config)#end
4948L# wr
4948# reload
Haihua

Downgrade 3750X w/ IP Base to LAN Base for Stacking

I have a WS-C3750X-12S-S (IP Services) that I THINK I'd like to downgrade to LAN Base so I can stack it with a WS-C3750X-48T-L that is already LAN Base...
Can I do this? Any reasons I shouldn't? Small environment, isn't much routing at all going on here...Thanks!

That is because it is not an image it is a license.
However you will loose more than just routing abilities.
so if i where you i would go the other way.
I would buy a license upgrade to upgrade the Lan base to ip base instead.
otherwise you will loose alot of functionality that you might want/need such as eem, powerstacking and so on.
to buy a license to upgrade contact your local cisco rep.
to change to a license from ip base to Lan base contact cisco licensing
[email protected]
good luck
HTH

3650 Switch Stack IP Base and LAN Base Software

Hello All,
I will have a 3 stack of 3650's. One switch will have the IP base image and the other two will have a LAN base image. I have read that all switches in the stack must have the exact image. If I have an IP based image and a LAN based image with the exact IOS version number, will the stack still work?
Thanks for your help

Take a look at this doc:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/qa_c67-729531.html
Q. What are the license requirements for a Cisco Catalyst 3650 switch stack?
A. In a Cisco Catalyst 3650 stack, all switches should be at the same image-based license (IP Services/IP Base/LAN Base) level. The active switch license level is considered as the reference, and the member switch licenses are compared against it. If there is a mismatch, the active switch with the syslog message “license mismatch error” indicates that the stacking was unsuccessful.
Q. How is a “license mismatch error” fixed in a Cisco Catalyst 3650 stack?
A. The license level of the mismatched stack member switch can be changed with the license right-to-use activate <license> all acceptEULA CLI command (entire stack should have the same wired license level) and reloaded from the active switch console. This will enable the member switch to join the stack successfully. The customer has to purchase a license before moving to a specific license level.
Q. What happens after 90 days of activating an evaluation RTU license?
A. An evaluation RTU license EULA expects that customers will purchase a permanent license within 90 days. After 90 days the evaluation license will not be valid. Warning syslog messages about the evaluation license expiration are generated 10 and 5 days before the 90-day window ends. Warning syslog messages are generated every day after the 90-day period. The expired evaluation license continues to function with the daily syslog messages until the switch is reloaded. The expired evaluation license cannot be reactivated after the reload.
Thank you for rating helpful posts!

Difference between LAN BAse Image and Enhanced Image

Can you tell me the difference between switches with LAN Base Image and Switches with Enhabced Image. I want to run HSRP and OSPF on two switches. Can I use LAN Base Image with this or is switches with Enhanced Image.
Many Thanks

The 2960 series does not have an Enhanced Image, just the standard software with and w/o crypto. The 2950 differences can viewed at the following link.
http://www.cisco.com/en/US/products/hw/switches/ps628/prod_bulletin09186a00800b3089.html
HTH and please rate.

Does 2960-X with LAN Base supports static route?

Does 2960-X with LAN Base supports static route?

Does 2960-X with LAN Base supports static route?
Yes. You need to load the correct IOS, 12.2(55)SE (and later), and you need to change the SDM Template.
Read more HERE.

802.1x authentication for LAN base hosts

How can I get Cisco Secure Services Client (SSC) ?
What is the product code for the software and is it free or do we need a licence?
Could you please send me If you happen to have information on how it works and known design issues with the SSC.
Cheers,
Pubudu.

Cisco Secure Services Version 5.1 Product Data Sheet
https://www.cisco.com/en/US/prod/collateral/wireless/ps6442/ps7034/product_data_sheet0900aecd805081a7.html

Catalyst 2960 for my LAN WS-c2960-48TC-S vs WS-c2960-48TC-L

Hello
I want buy a Catalyst 2960 but i don't now which is great for my situation.
Model : WS-c2960-48TC-S (LAN Lite - 400 euro) vs WS-c2960-48TC-L (LAN Base - 900 euro) the difference of price is half.
I need 3 VLAN (2 VLANs with data and other VLAN (3th only voice).All security options want applied on ports.(MAC,ACCESS..etc)
Between switch and router will be a TRUNK channel...
The network design parts: lan printers - 4, desktop - 16, phone IP - 10.
I have only ISP .
So..what i need? LAN Lite or LAN Base
Another question: In LAN Lite i have all commands?
thank's

Q. What are the advantages of Cisco Catalyst 2960 Series Switches with the LAN Base software relative to Cisco Catalyst 2960 Series Switches with the LAN Lite software?
A. Cisco Catalyst 2960 LAN Base switches deliver intelligent services for branch offices and wiring closets. The LAN Base IOS software supports enhanced Layer 2+ security, quality of service (QoS), availability, and scalable management to enable new converged applications. Catalyst 2960 LAN Base switches include both 10/100 Fast Ethernet and 10/100/1000 Gigabit Ethernet connectivity in 8-, 24-, and 48-port configurations.
Cisco Catalyst 2960 LAN Lite switches are for entry-level branch office and wiring closet networks. They simplify the migration from nonintelligent hubs and unmanaged switches to a fully scalable and reliable network. The LAN Lite IOS software supports standard Layer 2 security, QoS, and availability while lowering the network total cost of ownership. Catalyst 2960 LAN Lite switches deliver 10/100 Fast Ethernet connectivity in 24- and 48-port configurations.
All Cisco Catalyst 2960 Series Switches have technical support service options available through Cisco SMARTNet ® service. All come with a Limited Lifetime Hardware Warranty, and LAN Base and LAN Lite software updates are provided at no additional cost.
Information came from the below link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-series-switches/prod_qas0900aecd80322c37.html
Will all commands be available? No...if they were then what would be the point of having different software levels? Will the switch meet all basic to intermediate needs? Yes. If you are looking for a set of specific commands to see if they are available then check out the command reference tools available from Cisco.
http://www.cisco.com/c/en/us/support/switches/catalyst-2960-series-switches/products-command-reference-list.html

2960x & 2960s stacking?

Hey guys recently I tried to introduce a 2960x switch into a 2960s stack.
I prepped the bpth switches and made sure the prefer sdm was set to default as well as setting the stack port speed on the 2960s stack to 10 so its would be compatible.
Once i stacked the switches i got a version mismatch error and an auto upgrade message, after waiting roughly 40 minutes with no succcessful upgrade i removed the X switch from the stack
below are the IOS running on both switches
*    1 52    WS-C2960S-48FPS-L 15.0(2)SE5            C2960S-UNIVERSALK9-M
     2 28    WS-C2960S-24TD-L   15.0(2)SE5            C2960S-UNIVERSALK9-M
3 52    WS-C2960X-48FPD-L 15.0(2)EX4            C2960X-UNIVERSALK9-M
Any thoughts on how to successfully stacked these?? Thanks in advance

Hi,
some info about stacking different switch 2960S with 2960X.
More info is available at:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/white_paper_c11-728327.html
Hope this can help you.
Mixed Stacks: FlexStack and FlexStack-Plus
The 2960-S and 2960-X support a mixed stack of 2960 models. All these 2960 models run the FlexStack protocol, allowing them to be stacked together into a single stack. The exception is the 2960-XR does not stack with either the 2960-X or the 2960-S. The 2960-XR has the IP-Lite feature set, and this is not compatible with the LAN Base feature set on the 2960-X and 2960-XR. Table 2 shows all the allowed mixed stack combinations. What is crucial is the Cisco IOS Software feature set. All 2960 models with the LAN Base Cisco IOS Software feature set can stack together.
Table 2. Allowed Mixed Stack Combinations
Mixed Stack Combination
2960-XR IP Lite
2960-X LAN Base
2960-S LAN Base
2960-XR IP Lite
Yes
No
No
2960-X LAN Base
No
Yes
Yes
2960-S LAN Base
No
Yes
Yes
Table 3 shows FlexStack-Plus backward compatibility and performance of 2960-X and 2960-XR with the 2960-S switches.
Table 3. Backward Compatibility
Scale of Mixed Stack Combination
Max Stack Bandwidth
Stack Limit
Cisco IOS Software Feature Set
2960-XR IP Lite
80Gbps
8
IP Lite
2960-X LAN Base
80Gbps
8
LAN Base
2960-X, 2960-S LAN Base
40Gbps
4
LAN Base
When the 2960-S and 2960-X members are stacked together, the entire stack (even the 2960-X members) fall back to FlexStack capabilities. Mixing 2960 members limits the max stack members to four, and 20Gbps stack bandwidth per member, and 40Gbps per stack.

2960X and Inter-vlan

I have read from cisco sites that 2960X with Lan base supports up to 16 static routes however I believe this is a layer 2 switch . One of my confusion is that would I be able to do Inter-vlan routing with this . Has anyone tried this ?

Thanks for the reply .
Yes i understand that dyamic routing is not supported . If we have one switch I can make 3 SVI and assign each port to each SVI , later each port can be connected to a Laptop . This way each laptop will have different IP . Because Laptop's default gateway would be SVI created on switch all data would travel there .
Now if i do a show ip route on that switch I will see all 3 SVI as Directly Connected route with an administrative distance of 0 because the line protocol of SVI is up .
My question is would Laptop A be able to ping Laptop B , Intervlan routing ?

Cisco Catalyst 2960X Ethernet Switch

"I want to buy Catalyst 2960-X series switches like WS-C2960X-24PS-L,WS-C2960X-24PD-L, buy I'm not very well know about c2960x series. Can someone help me ?"--from yahoo answer.
All Catalyst 2960-X Series Switches use a single Universal Cisco IOS Software Image for all SKUs.Cisco Catalyst 2960-X Family of Switches are available with the LAN Base and LAN Lite feature sets.
WS-C2960X-24PS-L Overview
Catalyst 2960-X 24 GigE PoE 370W, 4 x 1G SFP, LAN Base Switch
WS-C2960X-24PD-L Overview
Catalyst 2960-X 24 GigE PoE 370W, 2 x 10G SFP+, LAN Base Switch

If you buy the LAN Base model, you'll have all of Cisco's normal switching features and options. My company has purchased many of these switches, and they work very well. Remember, these are access layer switches. If you're looking for something to be an aggregate switch for things that push a lot more data (ex. several wireless controllers), you'll want to go for something more powerful.

New Base Airport Extreme 802.11n .....bugs

Well,
I have just read tens of posts in many forums, included this one.
It seems that the Base Airport Extreme 802.11n has severe problems of connections to internet.
That's is also my case.
This is my config.
1. Modem NetGear DM111P <--> WAN Base Airport Extreme 802.11n
2. LAN Base Airport Extreme 802.1n <--> Ethernet iMac 24"
3. LAN iMac as DHCP auto IP
4. Base Airport set for PPPoE
There is no way to get into Internet.
If I connect the Modem DM111P directly to the iMac 24" LAN the Internet is on, fast, fluid.
With the Airport in betwwen....no way...
Any help ?
I am seriously thinking Apple has distributed a product full of bugs.
Read other forums with same problem.
Beppe
iMac 24" Mac OS X (10.4.8) Base Airprt Extreme + 2 x Airport Express

James,
Confirmed: the NetGear <--> AEBS <--> iMac does not work.
I have set the Bridge Mode as you suggest, but nothing, no internet !
Othe 3 hours of tests in setting tens of conigurations. No one works.
All the leds of the NetGear Modem as the one in the AEBS are solid green.
I will return back the NetGear modem to the retailer.
I am now running with my old Pirelli Modem from Alice Service (Telecom Italia Net) that - even if slower - at least it works.
I am concluding that the Airport Extreme has seriuos problems of compatibility with the open market modems.
Apple should check the SW+HW before selling such difficult items as the the Airport Extreme base.
Just a question: which model/type of modem(s) is(are) effectively compatible with the AEBS ?
If the retailer will permit me this, I will replace the NetGear (a very good modem...what a pity) with a compatible one with this strange base.
Thaks for your help.
Beppe

2960X LAN LITE VS LAN BASE

Similar Messages

Maybe you are looking for