2G Ipod Touch stuck in recovery mode after battery runs out

I recently bought an Ipod Touch and have had the battery run out on me several time now on accident and every time it has gotten stuck in recovery mode giving me error 1604 every time i try to restore it. several times before i have gotten it to restore by seemingly random means but was wondering if there was a single way this can be solved other than making sure my battery never dies.

Hi Ardent Veritas,
The 1604 error is generally related to USB connection issues. The USB connection issue could be causing the charging issues also.
Make sure the iPod is directly connected to the PC and not plugged into a hub, monitor, or keyboard. This article: http://support.apple.com/kb/TS1286 provides general USB connection troubleshooting tips.
-Jason

Similar Messages

  • Ipod touch stuck in recovery mode after update

    Help!  Ipod touch is stuck in recovery mode after an update.  I don't want to restore and lose all pictures.

    You have no other choice but to restore. You can restore from backup and get the iPod back to where it was when the backup was made.

  • IPod touch stuck in recovery mode after iOS 6 update error 6

    I wanted to sync my iPod touch with my Mac last night, when iTunes tried to sell me on the iOS 6 update.  I told it to go ahead with the update, and left it alone to do its thing.  When I checked again, it told me the update had failed with error 6, and that I might need to restore my iPod.  The only info I've found about error 6 pertains to Windows security software, and that clearly does not apply to my case.
    The iPod is now stuck in recovery mode, and none of the my googling has changed that.  I have tried the various patterns of power and home keys, and have also tried downloads that were supposed to force the iPod out of recovery mode.  How exactly does an update brick a device?  Now I don't mind restoring the iPod, but I need to get my data back.  Loosing the data is not acceptable.  This is not a jailbreak attempt.  I just want my data back, and I don't mind going low-level to get it (i.e. terminal, dd, scripts, ...).  Pointers in the right direction would be greatly appreciated.

    I was able to extract my data and copy it to a disk image with the help of http://code.google.com/p/iphone-dataprotection/wiki/README.  This process is really only appropriate for developers, I regret to say, but for developers the process is reasonably robust.  I still had to read between the lines in one or two places, and make good use of the shell, but I am delighted to have retrieved my data from my iPod.
    A lower priority question for me is whether to try to collect my notes and contacts from the assorted .sqlitedb files.  It looks like iFunBox may come in handy if I try to push things back onto the iPod once I restore it.
    For anyone who cares to know, my iPod Touch decided to listen on port 2000 instead of port 2222, my /dev/rdisk0sXsY devices had different numbers than expected by dump_data_partition.sh, and I had to find my keychain-2.db file in /mnt2/Keychains on the data filesystem.  But it worked, and that's awesome.

  • Ipod touch stuck in recovery mode and will not restore. error code 3194

    ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help

    Hi @rchangel - Thanks for the ideas...
    Yes - it won't let you install the 32 bit version on a 64 bit machine.
    I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
    I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
    I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
    I want Apple to recognise that there is a problem, and then I want them to fix it.

  • I have an 1st Generation Ipod Touch stuck in recovery mode.

    I have an 1st Generation Ipod Touch stuck in recovery mode. Error message shows "The Ipod "Ipod" could not be restored.  An unknown error occurred (1).  No back up.

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - https://discussions.apple.com/thread/5922457
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • HT201210 ipod touch stuck in recovery mode...try updating says server not available try again later

    ipod touch stuck in recovery mode...try updating says server not available try again later

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    It could be that the servers are down/overloaded

  • My iphone 5 is stuck in recovery mode after battery change?

    my iphone 5 is stuck in recovery mode after battery change, I decided to change my faulty iphone 5 battery as i was out of warrenty, I managed to chance the battery with no problems (I Think), when i put the phone back together and tried to power on with the power button, nothing happened.!  i connected to itunes and it powered on, displaying the connect to itunes screen (recovery mode) all was going well, the phone was restoring, the image of the phone restoring and loading up was displayed on the screen, when it finished it restarted but to show the connect to itunes screen again, it is stuck in the recovery loop. i tried the steps with holding the power and home button etc, none worked.! now when i try to restore, it extracts software but then, ' the iphone could not be restored, an unknown error occured (3194)' comes up, any ideas out there???? and Happy Christmas to Everyone ,

    Hello Andyoneill9,
    It sounds like you are trying to restore your phone but keep getting an errror message 3194. I want to recommend the troubleshooting steps from this article named:
    Error 3194 or "This device isn't eligible for the requested build"
    http://support.apple.com/kb/ts4451
    Resolution
    Important: If you see one of these messages and need help updating or restoring your iOS device, Install the latest version of iTunes and try to update or restore again. After that, follow these steps if you need more help.
    Check your "hosts" file
    After you've updated iTunes to the latest version, you can check the hosts file to be sure your computer can contact the update server. Use the numbered steps below if you’re on a Mac.
    If you’re using a Windows computer, follow steps in this Microsoft support article, noting that resetting the hosts file will affect software services that rely on hosts file redirects. If you're using Windows on a business computer, consult your IT department to be sure applications will still work correctly after resetting the hosts file.
    In the Finder, choose Applications > Utilities.
    Open Terminal.
    Enter this command and then press Return:
    sudo nano /private/etc/hosts
    Enter the password you use to sign in to your computer and press Return. You won't see text appear in the Terminal window when you enter the password. Make sure you use a nonblank administrator password.
    Terminal will display the hosts file. Navigate using the arrow keys and look for an entry containing “gs.apple.com”.
    Add the # symbol and a space ("# ") to the beginning of the gs.apple.com entry.
    Press Control-O to save the file. Then, press Enter when prompted for the filename and Control-X to exit the editor.
    Restart your computer.
    Try to update or restore your iOS device again.
    This is the first troublehsooting step to try, so there are additional things to try if needed you need them.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • TS1441 ipod touch stuck in recovery mode

    attempted to upgrade to OS8 and my ipod touch is stuck in recovery mode

    The best way to get out of this situation is to use a well-known tool called TinyUmbrella.
    First of all download TinyUmbrella  http://thefirmwareumbrella.blogspot.in/
    Now, making sure your device is connected to your computer, launch TinyUmbrella
    It will automatically detect that your iPod is stuck in recovery mode
    Select the Exit Recovery button and it should throw your iPod touch out of recovery.
    Alternatively, you can right-click on your iPod name from a list at the side
    of TinyUmbrella and select Kick out of recovery.

  • IPod Touch stuck in recovery mode and not detected in iTunes

    I was trying to update my iPod Touch (currently 3.1.3), so I downloaded the 4.3.3 firmware (I didn't want to download the 4.3.5) and connected my iPod to my computer, opened iTunes and hit Shift+Restore. Then, I chose the 4.3.3 firmware and proceeded with the restore.
    However, the following appears:
    Error 1602
    I pressed OK and the restore process stopped. But, my iPod is stuck in recovery mode. Every time I reboot it, the recovery mode shows up. It's also not detected in iTunes although my computer recognize it as iPod Touch Recovery Mode.
    Please help me solve this. I can't use my iPod.

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694
    Also, when updating/restoring an iDevice, iTunes contactact the Apple sever to verify that you have the latest iOS version.  If not, it will not allow an install if an earlier version.

  • HT201263 Please help, I'm extremely frustrated.  Have 4th G ipod touch stuck in recovery mode.  Tried connecting to another computer to restore.  Goes through 75 minutes of ipod software update then get a Problem downloading.  Network connection timed out

    Please help, I'm extremely frustrated.  ipod is stuck in recovery mode.  Connected to different computer to restore and after 75 minutes of downloading get a message that there was a Problem downloading, network connection timed out.  Cannot get past "connect to itunes" on ipod.

    Disabling the computer's antivirus and firewall during the download and update usually resolves that error.

  • New iPod Touch stuck in recovery mode during initial setup

    I am trying to set-up my daughter's new iPod touch 5th Gen. When you try to connect to iTunes message says "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes". Even when you disconnect from computer it is stuck on screen telling you to connect USB to computer.  Two of her friends also got this iPod for Christmas and are having the same problem...during initial set-up. I've tried the system updates 3 times. iTunes recognizes the device, but the computer is not recognizing it as a drive. I've tried both my Mac and my Windows PC.  I've tried hard resets.  You can't remap the drive because the device doesn't show up. Most of the apple support topics address if iTunes doesn't recognize the device in conjunction with it not being recognized by the drive.  Obviously a problem with the new update because several brand new iPod touches wouldn't be having the same problem. Please help if you've found a solution. Happy New Years! 

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Does the iPod charge when connected?
    Have you tried another computer?
    Have you tried another cable?
    Some users have reported defective Lightning cables came with their 5G iPod. Some did not word from the beginning and for some the cables failed after a very short time.

  • My ipod touch stuck in recovery mode and itunes doesnt reconize ipod what can i  do?

    my ipod stuck in recovery mode itunes dont reconize or show device and i dont have access to orginal computer what can i do to solve this problem

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My iPod touch stuck in recovery mode and can not be detected by my lap top.  HELP PLEASE!! Thanks

    It stopped chargin and now is not being recognized by my computer, it says that the device has malfunction. It also is stuck in recovery mode but since it is not recognized by my computer it does not appear in iTunes either.

    - See if placing the iPod in DFU mode will allow iTunes to see the iPod.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - Try another cable
    - Try different USB ports
    - Try another computer.
    - Last, make an appointment at the Genius bAr of an Apple store

  • IPod Touch stuck in recovery mode, error message 1611 when trying to restore.

    I bought a 2nd generation ipod touch from someone on CL and it appeared to me that it just needed to be plugged into the computer and be synced with itunes. But its stuck in recovery mode. When I plug it into my computer, itunes says it sees the ipod is in recovery mode and needs to be restored. Sout t I click on restore and it tries to restore it, but then it stops in the process and gives me error message 1611. I looked up this error message and it has to do with system security. I messed with my security settings and I still get this message. I tried using my home computer instead of my laptop and it still gave me the same message. Ive also tried holding down the power and home button for several seconds and it still goes back to recovery and gives me the same error message when I try to restore it. Also, itunes recognizes my ipod, but my computer does not.. Can anyone help me? Do I just have to bring the ipod into an apple store and have them figure it out? Thanks in advance!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Have you tried what is in bold

  • My iPod is stuck in recovery mode after failing to update to iOS 8.whatever and now won't connect to iTunes to restore?

    So yeah, got an iPod touch for Christmas and it's pretty much bricked it and I haven't even had it for a full month yet. Not amused. I've tried everything from reinstalling everything Apple related on my laptop to external programs that promise to kick that thing out of recovery mode. If there's any other way to fix it I'd love to know considering it won't show up in iTunes at all so there's no way for me to restore it. This is my first Apple product and I haven't found a solution to a problem that I've found dates back as far as 2012 with no semblance of a way to fix it. Though I've seen ways to fix each problem separately it appears you need one thing to be working to fix the other which is an issue.
    Okay I'm just ranting to but help would be appreciated

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

Maybe you are looking for

  • How Can I sync contacts FROM my iPhone TO my AOL E-mail?

    How can I sync contacts FROM my iPhone TO my AOL E-mail? In other words, I want to keep all of my iPhone contact information intact and make AOL "mirror" it (and not wipe it out when I sync thru iTunes).

  • CSV to Excel 2013 - Issue with number format

    Hi, I use Excel 2013 to manipulate CSV files. I experienced issue with number format cells. In my CSV file there is one column that presents latitude values in format: 52.05456464. When I open my CSV file in Excel 2013 all values in that column get s

  • APP without payment Method specified.

    Hi Guys, I want to run the APP and I want the result to be just the payments made to the vendors. Later  we are going to take the print out of the payments from the payment run and send it to the bank via a print out of the same. Is it possible to ru

  • When converting higher bitrate songs to 128 does it alter the music library on the pc?

    I have an iPhone 5S 64 GB and an iPod Nano 6th generation 16 GB that I sync to a windows based PC. I have 15.28 GB of music on my PC. It fits nicely as is and at the higher bitrate. I would love to put all that music on my iPod. I am curious if I con

  • Non Exceptions error in DATA SERVICES

    Hello everyone. Anyone know how I can reassign the ranges for error exceptions in Data Services ?. For example an error when deleting a file that does not exist on disk, throws code 50616, but the catch object can not monitor it because it is not wit