2G phone hangs on trying to install an application

Hi.
We know that the primary program in charge of controlling the applications sent to iPhone from the mac is a program located at Your iPhone/Developer/usr/bin/debugserver. It is invoked by Xcode and remains running for the life of the application being installed on the iPhone.
For some reason when I try to install my application on a 2G device it just hangs. The same application works fine on a 3G device. I have seen the following cases while trying to run this app on the 2G device.
Case 1:
The device hangs because on an attempt to start remote debugserver on the 2.2.1 device. On the Xcode console status bar I see "Starting remote debugserver with Blah.app on MyiPhone2G2.2.1" with no progress.
Case 2:
Sometimes the remote debugserver on the device is started successfully, however, when the gdb failes to attach to the target app process, the output from the console is as follows:
Running…
[Switching to thread 10755]
[Switching to thread 10755]
warning: Invalid remote reply:
warning: Invalid remote reply:
Case 3:
The device simply rejects the request to run the target app and shows an error msg box - "The service is invalid. Please check your setup and try again (0xEB80000002)"
Thanks for any pointers to help me resolve this problem.

Ask your sister.
 Cheers, Tom

Similar Messages

I recently got iphone 4 , yesterday i was trying to install an application from the itune store it say that i need to authorize it ( i already have an account and bought some apps ) how can i authorize the device ?

i recently got iphone 4 , yesterday i was trying to install an application from the itune store it say that i need to authorize it ( i already have an account and bought some apps ) and there was a CLICK HERE BUTTON , when i press on it it take me a to a page that require some kind of activation code or smthn like that ,
how can i authorize the device ?
and btw i bought it from UAE store
IOS 4.3.2

You should only make purchases for all your devices using a single Apple ID. There is no need, and indeed a good reason not to, set up a new Apple ID with each new device purchase. While items purchased under different IDs can be played on a single device, you cannot merge Apple IDs and it makes it cumbersome.
Apple IDs do not expire but may become dormant and require reactivation if they are not actively used.
You should make note of your Apple ID and passwords and keep a record of it. Like a bank account it contains access to items with value. Update your Apple ID email address as they change.
I see you were guided to this forum by a help page on recovering your password. If that is not sufficient try the links below. Apple will need to verify you are indeed to owner of the accounts to which you are trying to gain access.
http://www.apple.com/support/appleid/contact/
Contact Apple for help with Apple ID account security - http://support.apple.com/en-us/HT5699 "This article provides country-specific Apple Support contact information for customers seeking help with their Apple ID password or other security-related issues."
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37

Strange solution to "Something went wrong trying to install this application."

Basically the solution was to install
AIR
Beta 3 then install the AIR 1.0, copy "Adobe AIR Application
Installer.exe", "Adobe AIR Application Installer.swf", and "Adobe
AIR.dll" from the C:\Program Files\Common Files\Adobe
AIR\Versions\1.0 directory into the AIR beta 3 directory which I
think was "C:\Program Files\Common Files\Adobe AIR\Versions\1.0.6".
Then, I associated the .air file with the "airappinstaller.exe"
executable located in the AIR beta 3 directory. Amazingly, doing
this allowed me to install the AIR application without any
problems.
The problem this addresses is getting the message "Something
went wrong trying to install this application." every time I tried
to install an AIR application. The exact error message is below. I
assumed that I was having problems because I had installed an AIR
beta in the past. I'm not for sure on that though. The AIR
installer log seemed normal. At least there were not any error
messages that I could see. The AIR application installer log did
not output any data for me. I followed the instructions from
this
blog on setting up the installer logs.
Here is the error message:
Adobe AIR
Something went wrong trying to install this application.
Please install the latest version of Adobe AIR from
http://www.adobe.com/go/getair
and then try again.
OK
---------------------------

Basically the solution was to install
AIR
Beta 3 then install the AIR 1.0, copy "Adobe AIR Application
Installer.exe", "Adobe AIR Application Installer.swf", and "Adobe
AIR.dll" from the C:\Program Files\Common Files\Adobe
AIR\Versions\1.0 directory into the AIR beta 3 directory which I
think was "C:\Program Files\Common Files\Adobe AIR\Versions\1.0.6".
Then, I associated the .air file with the "airappinstaller.exe"
executable located in the AIR beta 3 directory. Amazingly, doing
this allowed me to install the AIR application without any
problems.
The problem this addresses is getting the message "Something
went wrong trying to install this application." every time I tried
to install an AIR application. The exact error message is below. I
assumed that I was having problems because I had installed an AIR
beta in the past. I'm not for sure on that though. The AIR
installer log seemed normal. At least there were not any error
messages that I could see. The AIR application installer log did
not output any data for me. I followed the instructions from
this
blog on setting up the installer logs.
Here is the error message:
Adobe AIR
Something went wrong trying to install this application.
Please install the latest version of Adobe AIR from
http://www.adobe.com/go/getair
and then try again.
OK
---------------------------

Adobe Air on Mac: "Something Went Wrong Trying to Install This Application" Error

I have been reading several posts on this, but nowhere can I find a solution. Within the past few weeks, I receive this error any time I try to install a new AIR application:
"Something Went Wrong Trying to Install This Application. Please install the latest version of AIR from.."
Then it gives me the download link. I've tried reinstalling, but that doesn't fixt the issue. I'm using OS X 10.6.3- is there ANY way to solve this?

Hi Jason. Can you post your install log here so we can take a look at what the problem may be? To see the install log, Open "Console" to view logging. Then copy and paste the log here.
In the meantime, try to uninstall AIR before reinstalling AIR to see if that fixes the problem.
Thank you!
-Lisa Chao
AIR QE

Anybody have tried to install 10g Application Server in Red Hat 9 ?

I have tried to install 10G Application Server in RED HAT 9, but it say that it need some rpm, I have install 10G Database and it work fine, bo 10As dont let me.
Â¿Anybody can help me?
Thanks in Advanced.

We have applied Patch# p4505133_10105_LINUX.zip for this. Check 390623.1 out.

HT5622 i have an apple id . while trying to install any application,they r asking to verify the email which hal already been verified. what to do?

i have an apple id . while trying to install any application,they r asking to verify the email which hal already been verified. what to do?

For anyone that comes across this. I managed to fix the problem. It had something to do with the date on my computer. Mavericks installer apparently does a date check of some sort and that is where the error is coming from. Open terminal and check the system date. It may be wrong. Another poster in the forums told me how to to check the date and change it. Click here for the link to the explanation. Be careful because the date is in a weird format.

Trying to install an Application

I hope this is the right forum for this question
I am trying to install a VB2010 application on a local windows 7 32 bit machine and I get the following message
system update required
Unable to install or run the application. The application requires that assembly Crystaldecisions.reportAppserver.CommonobjectMode 1 version 13.0.2000.0 be installed in the global assembly cache (Gac) first.
Can someone point me to where i can go and get the executable (not a merge file)that i can put on the local machine.
Thanks ,
jim

You need the CRVS2010 runtime on that computer:
MSM
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0_1.zip
MSI 32 bit
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0_1.zip
MSI is better as it includes all CR dependencies.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Getting DISM Imaging Servicing Utility error when trying to install an application

Hello all, thank you in advance for your responses,
When trying to install an Fax over IP solution, the installation is failing near the end and kicking back a 1603 error. I have included an excerpt from the Install log.
MSI (c) (40:6C) [07:52:00:818]: Grabbed execution mutex.
MSI (c) (40:6C) [07:52:00:818]: Cleaning up uninstalled install packages, if any exist
MSI (c) (40:6C) [07:52:00:818]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/26/2014 7:52:00 ===
If any other information is needed please let me know. I am stuck on this process.
Thanks Again!!
Dillon

These ones may help.
You receive an "error 1603: A fatal error occurred during installation" error message when you try to install a Windows Installer package
How to locate the cause of error code 1603 in a verbose MSI log file
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

HT3910 I get an unknown error when trying to install the applications disc contents

I rebooted the MacBook pro that my dad just gave me and erased all the memory that he had on it but when I try to install the applications disk again it tells me unknown error and to contact the manufacturer I don't know who that is exactly(is it a specific part of apple?) and I don't know how to contact them what do I do?

Have you tried to download anything else?

Trying to install an application "A newer version is already installed"

Hi, I'm trying to install some Canon utilities. Specifically I'm trying to install DPP (Digital Photo Professional) and the EOS Utilities and I get an error that says the same version is already installed or that a newer version is already installed. Now, that's all fine and dandy if it were not for the fact that these applications are NOT installed. I GREPped the System Folder, and Library folder as well as user folders looking for instances of "Digital Photo Professional", "EOS Utility", etc but nothing really shows up.
I've run the periodic scripts. I've cleared the caches in the Library, and System folders as well as individual user caches. I'm stumped. Any suggestions?
Cheers, Joe

Go into Hard Drive->Library->Receipts and delete whatever you got that is iMovie related.

Log in Screen hangs while trying to install upgrade download of elements 13

I downloaded the update of Premier elements 13, tried to run the install. I first get a message that says my machine needs to be restarted and I'm given the option to quit or ignore. I restarted multiple times and still get that message. I click ignore and the initialization process starts and everything looks fine. I get the Sign in required, click sign in, put in my username and password then thats where it hangs. Little boxes just go round and round and no connection. And.. yes, I do have a connection Thanks for your help!
I have windows 7. See the below screen shots. Thanks!

janmendoza
Premiere Elements 13 on Windows 7 64 bit.
From where are you downloading Premiere Elements 13 (as purchased or tryout)?
Please give the following a look with regard to what worked for me with version 12.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome. If none of the above resolves the matter, we might look at download
of Premiere Elements 13 from another source. More on that later.
ATR

Can't make phone calls after trying ti install 4181

Last night I installed the latest os 4181. (via wifi) it took forever. Got the BB logo for the longest time. I went to bed hopeing it would be done in the morning. Well, woke up and still see the logo. So i decided to hold the top button and reboot. It rebooted. All my apps and emails were there. But my text message icon was gone. I reboot again. Text message icon shows up but all my text messages are gone!!! I sent a text to myself and it works. I checked my software and it apparently didn't even upgrade to 4181! it's still os 10.1.0.2050 software release 10.1.0.2014. But I was glad that all my apps and emails were still there. Sad my texts were gone...but i live. Stupid me forgot to backup though.
I went out for the day. Didn't make any phone calls. Then i noticed i got a voicemail. I tried calling, but i got a message saying "Call Failure. Unable to connect your call Please try again." i tried dialing and it didn't work. WTF?!? I can't make any phone calls!! i tried to turn my network on and off (i'm with Telus) and still didn't work.
I got home and backed up everything. Thinking I'll try to download 4181 again, or maybe I should download my current os again.
Is anyone havening the same issues?!? I've read people lost their texts but they did have theirs upgraded to 4181. Mine didn't.
Someone please help!!!

I did a chat w Telus yesterday and he couldn't figure it out. 4181 did not install on my phone. Its still 2050. It says my network is Telus and I do get emails and texts (although I lost all my text messages). The Telus guy said my network is fine. He sent a ticket to a tech guy and someone is to get back to me. I jst can't wait so long. I need to make and receive calls. I asked him to send me the link to reinstall 2050 but he couldn't find it. I tried to download the 4181 again. Same problem. Stuck st the bb icon for hours. I rebooted by holding down the top button. It rebooted. It did not install 4181. Lost the texts I sent yesterday. And still cannot make or receive calls. I am sooooo frustrated!! Going to Telus store today.

Error trying to install existing application

Hello,
I have exported one of my Production applications and I am getting an error when I try to install it on my Test server. I am running Application Express 3.1.2.00.02 on both boxes. The application uploads fine, but gives errors when I try to overwrite or install it. I have done this many times before without issues. Here is the error that I get:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 14, column 47: PLS-00103: Encountered the symbol &quot;F&quot; when expecting one of the following: ) , * &amp; = - + &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;= &lt;&gt; and or like LIKE2_ LIKE4_ LIKEC_ between || multiset member SUBMULTISET_ <pre>begin wwv_flow_api.create_page_bu
I have exported the application more than once just in case the file went south on the save. I would appreciate any sugguestions. This is specific to this application. I just exported a different app and imported/installed it into Test with no issues.
Thanks,
Neil

Thank you Andy,
I had searched the forum and found this post before I posted. The import works fine. I get the error when I try to install. I know that this issue is specific to this export. I scanned the sql and I thought that I had found the problem when I ran across a select statement that had the fully qualified Production schema. I removed this and exported again, but I still get the same results when I try to install.
Thanks,
Neil

I get an error message when trying to install the applications dvd after restoring my MBPro to factory; What can I do?

It goes through all the steps but on the last one for installation, I get an error message saying it failed to install, try again (roughly).

This issue can be caused by an extension or plugin that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

When trying to install an application I get "Authenticating Installer"...

And, then it stops. Nothing happens and the program does not install. Any suggestions?

My Mountain Lion install failed for the following reason:
OS X can't be installed on the disk Macintosh HD, because a recovery system can't be created.
The message went on:
Visit www.apple.com/support/no-recovery to learn more.
The page is about a different failure, but I'm assuming the reason for my failure is this one:
The disk has a non-standard Boot Camp partition setup, in which further partitioning was performed after running Boot Camp Assistant, or the configuration that Boot Camp Assistant created was manually modified.
The cure involves erasing the entire HD and starting from scratch, which in my case would involve backing up both the Mac and Windows sides, setting up Boot Camp again, reinstalling Windows XP and recovering everything from backups on both sides. I would rather not have Mountain Lion than go through all that, and I think it's unfair for Apple to expect me to.
Because I don't recall doing anything off-piste when I set up Boot Camp in the first place (for a start, I'm not clever enough), I consider this episode an inadequacy in the Mountain Lion installer. As I won't be using the download, is it possible to get my money back?

2G phone hangs on trying to install an application

Similar Messages

Maybe you are looking for