2G shuffle autofill with convert not working

Since updating to iTunes 7.5 I've been unable to sync (autofill with convert to 128 kbps). It begins syncing but repeatedly goes back to the beginning and resyncs. It's been going three days straight without making it through. I'm running Vista and the songs in question are either mp3 high bitrate or alac. This worked just fine (taking a couple of hours due to the bitrate conversion) up until I upgraded itunes to 7.5

HI,
Since the upgrade to Snow Leopard, I have lost the ability to have Usernames & Passwords Autofilled(?) for some sites which formerly allowed this function.
From the Safari Menu Bar click Safari/Preferences and select the Autofill tab. Make sure: User names and passwords is selected.
Carolyn

Similar Messages

  • DNG Converter not working on a qualified camera raw photo

    DNG Converter not working on a qualified camera raw photo  Always comes back with this Message  "  check if camera is recognized.   "

    Supported Cameras Camera Raw plug-in | Supported cameras

  • Axis bank net secure with webpin not working on ipad2

    Hi,
    Axis bank net secure with webpin not working on ipad2
    Lt me know how to proceed

    Try using their App:
    https://itunes.apple.com/in/app/axis-bank-mobile-application/id517266358?mt=8

  • Autofill function is not working, 'window' sticks through it not functional!

    autofill function is not working, 'window' sticks through it not functional!

    Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
    1. Quit and relaunch Safari.
    2. Select your card in Contacts. Then select
    Card ▹ Make This My Card
    from the menu bar. Also select
    Contacts ▹ Preferences ▹ vCard
    and uncheck the box marked
    Enable private me card
    if it's checked.
    3. In Safari, select
    Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
    If the box was already checked, uncheck it and then check it again.
    4. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • Since installing Yosemite, Airplay with Freebox not working

    Since installing Yosemite, Airplay with Freebox not working
    With Maverick Airplay working well

    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite
    Try deleting the printer and scanner and add them back.
    Also try Applications/Image Capture to see if it can find the printer and scanner.

  • Wifi connection with 4s not working after installing new software ios6

    wifi connection with 4s not working after installing ios 6.

    Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
    Then go to Settings > General > Reset Network Settings  and try connecting again when the phone restarts.

  • I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

    For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

    Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Applications associated with workstations not working

    Hello,
    I have onld zen 7.x, on netware.
    Applications associated with workstations not working or appearing in one container. Not sure if it every worked. Apps work fine with users.
    I am in a bind, since I need to get the app out in the workstation space.
    It maybe rights or simple install error with the ZEN from the begining.
    thanks for any help or ideas.. Yes I know I need to get to Zen 11.
    Phil

    PhilJannusch,
    > Applications associated with workstations not working or appearing in
    > one container. Not sure if it every worked. Apps work fine with users.
    >
    > I am in a bind, since I need to get the app out in the workstation
    > space.
    Please tell us more as "not working" can mean a lot of things. So:
    Are they user or workstation associated?
    Are those for whick they do not work (users or workstations) all in the
    same container?
    In what way do they not work?
    Any errors?
    Anders Gustafsson (NKP)
    The Aaland Islands (N60 E20)
    Have an idea for a product enhancement? Please visit:
    http://www.novell.com/rms

  • I am getting frustrated with Apple not working with Flash player on some of my favorite web sites. Is there any alternative that will work on I-pad instead of flash?

    I am getting frustrated with Apple not working with Flash Player on some of my favorite web sites! Is there another alternative to watching these site options on my I-pad?

    Flash is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices - something which they have never managed to do and which they have now given up on trying to do.
    Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app).

  • My orignal computer that I sync my iPhone 4 with does not work...can I sync it with a new computer?

    My original computer that I set up my iPhone 4 with
    Does not work.....can I use a new computer to sync
    The phone....how do I do this and is there a risk of
    Of losing any apps, music etc

    Try this:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Can only add music with Autofill from Library (not working with playlists)

    I can only add music using the Autofill feature and it will only work when the main music library is selected. Autofill does not work when a playlist is selected and I can not add music directly by dragging songs from a library or playlist as described in the owner's manual.
    Is there something wrong with iTunes, the iPod or is this user error?

    Hi Steve,
    You're right it's the same for me.
    I don't know as you mentionned whether it is an user error or not but I've got 2 iPods now, one is 60 Go color display (60Go) and the other received yesterday is 2G iPod Shuffle (Clipod). I can't drag songs from 60Go nor to iTunes Library neither to Clipod Music. The autofill function works only from iTunes Library where I've got 5 songs only (new MacPro), somebody knows how to export 60Go music to iTunes Library ?
    Thanks,
    Peloche
    MacPro 2.66, 6GB, 1.7TB; Mini G4, 1.45, 1GB;iPod 60 GB; 30" & 20" ACD; Apple IIC   Mac OS X (10.4.8)   X1900XT

  • Converter not working correctly

    I have been using PDF converter for a while now with no problems, but when I tried to convert a PDF file today, it is not working properly. The formatting is all mucked up and the letters are in 5 different types of font/size.
    I have uninstalled & reinstalled Reader but it has not helped fix the problem.
    Sorry, but I am paying for this service, and it is not working.
    It was working great, what has happened? Please help.

    This is the Reader forum; the ExportPDF one is here:
    http://forums.adobe.com/community/exportpdf

  • DVCPRO HD Frame rate converter not working

    Hello all
    I cant seem to get my frame rate converter to work. I shot the footage on my hvx200 at 720p30 and then put it in film mode and changed the frame rate to 60. Then I log and transfered it into FCP and when i go to convert it i keep getting the same message.
    www.okayyellow.com/errormessage.png
    does anyone know why? I have gotten some footage to convert before with no problems.
    Thanks
    Andrew

    Evening Films wrote:
    All worked well last time I did this (late March), but upgraded to Leopard since then and brought all FCStudio apps up to date at the same time.
    Looks like on import (log/transfer in FCP from Firestore) somehow the files are being flagged as having 'temporal compression', which can't be true if they're DVCPRO-HD, can it? Anyway the 'temporal compression' seems to be blocking the conform in CT, as well as the DFCPRO FRC in FCP.
    So I tried importing the files from the Firestore thru an older version of FCP (5.1.4) that I have on my PowerBook (the problems described above are on my Mac Pro). I then copied these files out of the capture folder over to the Mac Pro, and sure enough: no problems with 'temporal compression'. The files were all marked as "maximum quality" and were allowed to be conformed from 60 to 24 in CTools, and have dupl frames removed using the FRC as needed.
    So something appears to be broken with FCP 6.0.3 and how it imported this particular set of files on the Firestore.
    I should note that if I hadn't tried to conform or FRC these files, I might never have noticed that there was a problem - they behaved as normal 720/60 files when just viewing them.

  • Read Only Display of Radio group and Text area with counter not working

    Hello,
    I am using Apex 3.2, with 10g for the database
    I have this form, with fields that will set to read only when status = 'closed'
    All of the fields display as read only except for 2. I cannot figure out why this is not working correctly.
    1st field is Issues that is a text area with character counter, with a sql query behind it, that is set to null unless the query is pulling in the data.
    2nd field is Status which is a radio group that will not display as read only when status = 'closed'
    I have other fields on the form with the same format and they change to read only when the status = 'closed', I have even copied the pl/sql expression from one field to these fields and it still doesn't work correctly. I have also tried javascript for an on load event, which works, but once I click on the save button, it disables all of the page items, which works correctly, but I purposely forget to enter information, to make sure the validations are firing correctly, which it does, but the script disables everything, not allowing me to correct the errors. The javascript is firing on the on page load event.
    Any help on this is greatly appreciated.
    Mary

    Dung,
    That API seems to have a bug, it returns true/false/null, so you could use 'return not nvl(htmldb_util.current_user_in_group(p_group_name => 'APP Admin'),false)' to get a false value.
    Unfortunately there's another problem: using the read-only attributes for checkbox or radiogroup item makes them hidden. My suggestion would be to create another item that has disabled="disabled" in the HTML Form Element attribute in the item definition and display that item or the non-disabled item alternately, using conditions based on the current_user_in_group logic.
    Scott

  • MacBook Pro to TV with RCA - Not working

    Hi guys, I'm trying to connect my Macbook pro 08 to my new Samsung HD TV. I'm using a DVI-D to HDMI for the video which works great, but I'm using RCA to the headphone jack for Audio and it's not working. I've tried playing with the settings in my TV but cannot change the Audio input to analog. I'm guessing my TV thinks it's getting the audio from the HDMI, but the DVI-D does not carry audio.
    Does anyone know how to get the audio to work with RCA cables? Or is there an adapter that can combine my audio into the HDMI input?
    Any help would be appreciated.
    (My TV has 2 HDMI ports, component, and RCA ports as well as a USB)

    Yes, it is the ones on the left, but you're not going to hear any audio because your input selection must be on Component on the TV in order to get the audio out of that input.  HDMI and Component are two different inputs on your Input menu selection.  Do this, play some audio on your Mac and then flip to Component on the TV with your stuff hooked up.  I bet you hear the sounds, but no video and when you're on HDMI, you see the video but no sounds.  That's because it's two different inputs.
    Also, your 2008 MBP doesn't support Audio passthrough the MiniDisplayPort, so you're kind hosed unless you do external speakers like Grant suggested.

Maybe you are looking for