2G Touch Gives Odd Error Message

I keep getting an error message with my 2G (I believe its the second gen) when I try sync'ing it. The system seems to go through the cycle of adding podcasts and apps, but at the end it says it can not sync because "the file can not be found". It doesn't say what file or give any other hints. I've upgraded the system to Snow Leopard and gotten all the updates, and sync'd it since.

This thread may be of some help: http://discussions.apple.com/thread.jspa?messageID=5565971

Similar Messages

  • Odd error message when attempting installation of iTunes 8

    When I try to install the iTunes 8 (the most recent version), I get an odd error message and am unable to successfully complete the installation. This is the message:
    Could not access network location
    %USERPROFILE%\Start Menu\Programs\Startup\
    This message is then followed by Retry or Cancel; Retry has not worked at all with the same error message popping up. There is no error number that I can see. After I finally hit cancel out of frustration, this message shows up:
    The installation of QuickTime did not complete successfully. iTunes requires QuickTime.
    I think that the first message occurs during the program's attempt to do QuickTime before the iTunes. I tried downloading and upgrading QuickTime separately, but that was also unsuccessful. I do now have an earlier version of QuickTime on my computer, but that is only because I recently added some software (Rosetta Stone to be exact) that requires the 5.0 version and downloads it automatically. I also have tried the troubleshooting tips on the Apple site.
    My computer is a Dell, with Windows XP Home Edition. I do have the second Service Pack from Microsoft, and should have all of the latest updates. Please help! I'm getting really frustrated with my computer and have no idea on what to do next.

    When you get a message about not being able to access a network location you usually need the Microsoft installer cleanup utility.
    Here is a method:
    Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
    http://www.apple.com/quicktime/download/win.html
    http://www.apple.com/itunes/download/
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
    http://support.microsoft.com/kb/290301/
    (To run the program – All Programs>>Windows Install)
    Now use the following method to remove iTunes and its components:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    *If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
    When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
    Restart your PC.
    Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
    Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
    If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
    restart your PC
    Install the stand alone Quicktime and check that it works.
    If it does, install iTunes.

  • HT4097 my ipad 3 is stuck in the "connect to itunes" mode. whether i restart or try to restore. when i try to restore itunes gives an error message saying an unknown error occurred (-1). any help.

    my ipad 3 is stuck in the "connect to itunes" mode. whether i restart or try to restore. when i try to restore itunes gives an error message saying an unknown error occurred (-1). any help.

    That error sometimes indicates a hardware problem. See 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • HT4623 I am placed in India.Maps in Iphone is not working after I had updated it to IOS 6.It just gives an error message.

    My Maps in Iphone 4 IOS 6 are not working
    It just gives an error message when I try to search the route .
    In IOS 5,its working fine,

    Apple is required to block Facetime in the hardware of all iPhones (and iPads and iPod touches) sold in the UAE. There is no way you can activate it, no matter what country you're in. If you want Facetime, you will have to sell your UAE-model iPhone and buy another one in another country (not including the KSA which has the same ban).
    Regards.

  • Ipod not recognized, getting odd error message

    I've seen this posted a few times, but without any hints as to how to fix the problem.
    I have a 4G 20GB iPod, just over a year old (meaning, no warranty), that has worked fine until this morning. I turned it on, and all of a sudden, it kept skipping through all of my songs, and wouldn't respond to the pause, play, etc. buttons.
    I attached it to my computer via FireWire, and I keep getting this odd error message: "You have inserted a device that has no volumes that OSX can recognize" It asks me if I want to ignore, initialize, or eject the disc. I've been having it ignore it, or eject it (staying far away from initialization). After I ejected it, I noticed that all the songs on my iPod are now missing.
    I reset the iPod, which didn't do much, and now I can't restore it, because neither the computer or iTunes recognizes my iPod. It shows up in Disk Utility, but I'm not entirely sure how to proceed.
    What happened to my iPod? I can't seem to find anything in the Apple support pages that seems similar to my situation. Any suggestions on how to get the thing to work again?
    Edit: I am using iTunes version 4.9; I have not updated to 5.0

    This is the most frustrating tech trouble!
    The same thing has happened to my iPod. It worked fine, then one day I plug it in and it says "Disc inserted is unreadable by this computer". As far as I remember, I didnt' update anything, make any changes, or adjust any settings to any of my hardware. SO WHAT HAPPENED?? And now I can't restore or doctor the iPod hardware bc my computer won't recognize it as actual hardware...
    pleeeeease help, if anyone has a way to fix this.
    The weirdest part, is that when I look at the information of the "unreadable hardware" it describes it with all the information, like how many gigs are available, how much space is used up, latest updates etc. So it can transfer information, but it pretends its unreadable? i dont understand.

  • Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

    Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet."   I am obviously connected to the internet since you are reading this.
    I tried upgrading permissions but it did not help!?  Can anyone tell me what is wrong?  Thanks

    Try
    Reboot the computer, see if that fixes it.
    Then try:
    Backup your files off the computer (not TimeMachine) and disconnect
    Hold c boot off the 10.6 disk and simply reinstalling OS X
    Log in and update to 10.6.8
    c boot off the 10.6 disk again and use Disk Utility >Repair Disk
    reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

  • To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • I have a an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes. All of the other movies on the card download with out a problem.

    I have an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes.
    All of the other movies on the card download with out a problem. The movie in question is not 'corrupt' as you can watch it in iMovie direct from the SD card but as soon as you try to import it, it  just says 'error'. iIve tried moving the file to an external drive ( and other variations on this theme) then importing but have had no luck.
    Can anyone please help me.

    The mystery remains....
    Thanks for the pointers. The file type is .mts (a proprietry sony one).
    I have now found some video converter software (Wondershare and iSkysoft) at a cost. Either will convert this file for me into .mp4. This I can then import into iMovie without any problems. I've checked this on the trial versions and it worked well but without paying am left with a giant watermark in the video
    The mystery (which I still havent solved) is why did 20 other .mts files import fine and then this one not?
    If you could point me in the direction of some free .mts converter software that would be the cherry on the cake.
    Thanks

  • My 3.6.14 keeps trying to update and gives this error message:"The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again."

    My OS is Windows XP version service pack 3. I even tried to install FF4 but it never get installed. As I mentioned my FF keeps trying to update itself but it gives the error message I provided in title. Now I don't have access to my FF browser and my life is stopped because I have all my passwords saved on FF. I restarted my notebook but it stills try to update itself giving the same error message. I can not also upgrade my Adobe reader 7.0.7 to 10 I have tried more than 10 times but it never gets upgraded. I had this Adobe problem since long time ago.

    Run the Firefox program once as Administrator (right-click: Run as Administrator).<br />
    If that doesn't help then do a clean reinstall.
    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * http://www.mozilla.com/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

  • ITunes set up gives an error message saying not a "valid win32 application"

    I am using Windows 7 and trying to download iTunes, but when I try to open the iTunes set up it gives an error message saying that it is not a "valid win32 application". It does the same for downloading quicktime. I have no idea what this means or what to do about it.

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Odd error message - Can't save new Pages docs

    I use Pages a lot and know it pretty well. But today I got an odd error message I have never seen. It is stopping me from using Pages.
    Today, when I attempted to create a new Pages document and save it to a folder in my Documents folder (or to my Desktop), I get an instant error message saying, "The file ‘FileName.pages' doesn’t exist." (see below).  In effect, Pages will not allow me to save a new file. I can open older Pages files, edit them and save them.  I just cannot create a new file and save it. I have restarted Pages and my computer multiple times with no effect on this message.
    Anyone dealt with this before?

    There you are, Pages 5 can be relied on to not be relied on.
    Not much comfort for your previous file though.
    Steve Martin in The Jerk, when he sets off on his great adventure, is taught some essential life skills by his black family:
    1.    Lord loves a working man.
    2.    Don't trust Whitey.
    3.    If you catch it, see a doctor and get rid of it.
    Were he to head off today with a Macbook Air under his arm we'd have to warn him about Pages 5 as well.
    Peter

  • Odd error message

    I am getting an odd error message with iTunes:
    +The iTunes library file cannot be saved. You do not have enough access privileges for this operation.+
    Any ideas why I am getting this message. My iPod never had problems before, and I am the only one who uses the computer.
    Any help would be greatly appreciated.

    I too have seen this error message now and again. (Right now as a matter of fact).
    Doesn't appear to have any adverse affects on my music library but with over 8,000 songs I may never notice the problems.
    Concerned...

  • Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

    Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

    If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier.  You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

  • Iphone 3gs shows activation required, hocked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

    iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

    Instructions to get the phone back working temporary.. till there is a real fix.
    1. turn off the phone
    2. fire up iTunes
    3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
    4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
    5. iTunes will then ask you to choose which previous backup to would like to recover.
    (note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1)

Maybe you are looking for