2GB Memory Card

Please am here again regarding 2GB Memory card, i still have 800MB free space left, everytime i try to transfer data it says "Not enough free space on disk C despite the fact that i put my phone on USB Mode: Data Storage, help me out here i don't know what am doing wrong thank you. 

Hi taiwo22,
Not enough free space on disk C
Does the above said line says that you dont have enough memory on your phone's C: memory?  You may have sufficient memory on your memory card, but do you have enough memory on your phone ???
What exactly you are doing ???

Similar Messages

  • E61i - 2GB Memory card showing as 242MB, not full ...

    I have put a new Sandisk 2GB Memory card into my E61i. It only shows up as 242MB. I reformatted it with the phone with no success at accessing a full 2GB. What is going on? Did I miss something?

    I do not know. Brand new, and no friends with similar connection.
    I did call the company I bought it from and they sent me a second card. It reports exactly the same amount of memory. Maybe it is an incompatible brand? I don't know. I just want the memory to work. My original thought was that maybe it was just not able to read it all in one go, but this really made no sense since Nokia says it is 2GB compatible. hmmm.

  • Moving files from Memory Card to Phone Memory on N...

    Hi everyone
    i have put 8 small trimmed down MP3 files onto my Nokia N95, they are to be used for certain people on my CONTACT list
    i sent them from my PC via Bluetooth to the N95 with no problems, they were then saved onto the 2GB Memory card
    how do i then move each MP3 from the memory card to the actual phone memory, i take its best to do this as it takes longer to access the MP3`s when they are on the memory card to be used as ringtones?
    or should i just leave the MP3`s on the memory card?
    also, how do i select an MP3 and then assign it to ALL the individual contacts that i need to in 1 go instead of opening each contact and individually adding an MP3 to each one?
    i have forgotten how to do it!
    i reset my phone last night with the holding down of the Green, * and 3 buttons
    i did this because my phone kept restarting about 3 - 4 times per day by itself, i dont have any applications on my phone or anything, not sure if its safe to put too many things onto the N95 internal memory, i dont wany anymore restarts!!Message Edited by waynester on 05-May-200702:44 PM

    First of all if size of your mp3 was a concer then you should have used the Music Manager in PC Suite to convert them to aac as they would be super small in size.
    Next use File Manager to move from the card to the phone. Better to sva eringtones on the phone or you would lose the 'link' everytime you take your card out.
    Two ways to set the ringtone for everyone. First would be to set it in your profile. And the other would be to set it to Groups... and the last one, each contact at a time.
    Ericssson EH 237, Ericsson EH 337, Ericsson GH 388, Siemens S25, Nokia 6210, Nokia 7250, Nokia 6230, Nokia 6280 & O2 Atom , Nokia N95, Nokia 5800 XpressMusic

  • Files deleted on memory card

    Hi,
    I just got a Nokia N73 and a 2GB memory card. One day i took the sim card out and put it in another phone and then back into my N73. First the phone asked for time and date information and then i saw that all my files on the memory card was gone? I repeated the operation again later, but it did not happen again. Is this a problem with this phone? I had y-browser installed...is this application known to cause problems like this?

    Yes, the memory card seemed to be the problem. It's a TwinMOS card which is a brand that I have used many times before, so it was just bad luck. I traded in my card for a new one that seems to be working better. Things that seemed to slow down when i used the previous card suddenly works great Never owned a Symbian phone before so didn't know how good i was supposed to work

  • N78 asking to remove memory card

    Hi there, i have bought my N78 just one month ago and find it amazing for almost every aspect except that it has a problem with the memory card. The fist time i turned on the phone, i have no notice that the Nokia microSD 2gb memory card was inserted as there wasn't any icon in the screen. So as i removed it and put it back in, the card was recognized but after a while the phone showed me a message asking to "remove memory card and press ok".
    I replaced the original Nokia card with a Sandisk card and still have the same problem, which is quite annoying because it is a brand new phone and i can't count with the memory card to store any information because after a while the card icon dissapears of the screen and it is like i have no memory card inserted in the phone.
    Any clue?? Thank you

    There were a few similar issues with cards in other phones in the past - I thought Nokia had ironed these out, but maybe with the N78 still being quite new ..
    I guess the most common issue was that the card wasn't formatted correctly. The way around is to format the card in the phone.
    Another issue was that the firmware wasn't designed to work with larger volume cards. I'd be very surprised if this was the issue as 2GB cards have been around for ages, however it might be worth checking if you have the latest firmware. To do this you need to use the "Update phone software" option in PC Suite. This will install a newer version of the firmware is there is one available.
    If neither of these helps, I guess you could try a factory reset. Not sure how that would help, but you never know.
    NB: be sure and backup (and preferably synch) your phone before you attempt to update firmware or reset the phone as both of these erase everything in phone memory.
    Have to say, the N78 I used didn't have any problems with it's 2GB card. It was SIM-free, though and SIM-free phones tend to be a lot less problem-prone than network-specific phones.

  • Transfer photos to memory card

    I have a 2GB memory card. I am trying to load it with 144 MB of photos. It accepted about half of the photos and now, after exporting the photos to my desktop and trying to copy them onto the memory card, I get the message: "cannot be copied because there is not enough free space."
    Clearly it is lying, but I don't know what to do about it.

    Welcome to the Apple Discussions. Memory cards are formatted for PCs, FAT 32, and as such do not allow many files in its root directory. The simple solution is to add all photos you want to a folder and put that folder on the memory card.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • I have a 5300 but nothing saves to the memory card...

    I've just bought a 5300 with a 2gb memory card, but all the music & pics i put on it seems to save to the phone & not the card. Have only got about 5 mp3's on it & says memory is full! Does anyone know how to fix this???? Thanks!!

    Whenever you transfer anything,just use the DATA STORAGE(Drag&Drop Facility)not the Nokia Mode.
    CHeeRios!

  • Memory card password request after software upgrad...

    Nokia 6700 Requesting Memory card password?
    I have a Nokia 6700 Classic, the bluetooth stopped working so I called Orange who checked I was following the instructions clearly and then suggested I download the latest software version 13.20  via the computer. I did this with no problem only to find that the bluetooth still did not work and now | was being asked for a password to access my memory card.  I have NEVER entered a password on my memory card.  Having taken advice from the website I had removed all my precious photos etc to the memory card so they would be safe - now I am asked for a password that I have never set. The software is obviously corrupt in my opinion and no one can help me with a password. Have tried all possible 4 number combinations 12345 and the guy at carphone warehouse thought it was an 8 digit/character passsword. I know I could format the card but the data would be lost. Can not make it work in the computer or in other phones. Can not remove the password as you have to enter it to remove it! Orange can not help although they have been super and likewise the Carphone Warehouse and Nokia seem to just send out standard responses that prove they do not read the correspondence, although Nokia are responsible for the faulty software that has done this. The photos include some of a friend I recently lost and of someone who has little time left, I can not replace those photos. Any help would be appreciated. Surely someone at Nokia - ie the software programmers should be able to say what they have done and get me the info. This fault has been evident on lots of forums for the last 4 years - it is about time it was taken seriously - both the problems with the bletooth and the memory password.  Any help appreciated.  Thank you

    My wife has forgotten the password for the microsd 2gb memory card which she had in her Nokia 6700 phone. she did a factory reset of her phone and now cannot acces her memory card. I've tried it in other devices and it is not recognised.. even in a PC. how can we access the card again. not bothered about data that was on it just wanna wipe it and reuse it. Try formatting or anything with her phone and it just keeps asking for the correct password which we don't know..
    It will only allow me to format it. If I give the right password 1st.
    WHICH WE DON'T KNOW!!!!
    HELP PLS!!!!!

  • Copying memory card? Protected applications

    I have a new 6300 and I have also bought a 2gb memory card to store music on. The problem is that it wont allow me to copy the 128mb card as the pre installed applications are protected. What can i do. The app's are Opera Mini, Converter, etc.

    Hi you can try and copy them onto the phone memory then put in your new card then copy them back. If that does not work send me a pm and i will send you the stuff i have them saved on my pc.

  • My latest mystery USB 2gb memory not recognized

    Just today when I plugged in a 2GB memory card dongle that used to work perfectly - my Macbook 13 won't recognise that anything has been plugged in. The device lights up but nothing appears on the desktop or in the Hard Drive root as a removable drive the way it used to.
    I can't access it. Does anyone know why it would behave like this.
    I've not told it to ignore any usb plugins. In fact the last thing I plugged in about a week ago was an EYE TV digital Freeview tuner which worked perfectly and I properly closed that and removed it when I shut down.
    Why would it not read from the San Disk USB stick suddenly ?
    I can't solve this one without help.
    Hope someone can
    Plado

    I'll just go and mark this as answered because your help is indirectly very useful.
    But what I actually did to solve it was I tried a reboot but no luck.
    Then I went back to carry out a full Software Update which I had refused a few days ago because it asked to update at a time very inconvenient to me and I didn't want the interruption.
    So I did a software update while looking for an alternative USB memory card. And after the update was complete and the system rebooted the USB was back to recognizing anything I plugged in including the Memory card that had failed.
    The bad thing though is that once again the Software Update has prevented SAFARI from running and I've got to download it again and reinstall it. What IS going on with this Macbook Leopard system? It seems full of utterly ridiculous bugs that Mac have no business letting something in this messy state out on the market.
    I'm sorry to be ranting like this but the average user would be constantly on the Support Line trying to solve problems that keep making the thing get stuck.
    I have to say I am by now very unimpressed with the Apple Mac OS X and I am going to have to severely restrict my use of the machine because it just isn't versatile or well enough sorted compared with Microsoft Windows.
    Thanks for you input.
    I think it's solved so I will mark the question closed but I still have to go and get this stalled Corrupted Safari back working again. What a bore!

  • Add one 2GB Ram card only (to make 6GB) in iMac 21.5 inch mid-2011

    I have just upgraded my early 2008 iMac and now have a spare 2GB memory card. Can I add this to my wife's mid-2011 21.5 inch iMac? The top two slots are occupied by 2 x 2GB RAM. If so, how would I configure the 3 x 2GB in the four slots?
    John

    In addition to Mike's response, the iMac must have the memory added in matched pairs.  That is, two side-by-side slots have to have the same size ram modules,  The over-under slots do not have to match in size but you cannot leave a slot empty.  You must have either two slots filled or four slots filled.
    iMacs are even more picky than other Macs about their ram...you absolutely must use the correct speed ram in all four slots.

  • Help! nokia 6300 memory card problem

    i bought sd 2gb memory card and it won't let me download more than 500 mb onto it! the memory status shows that there is plenty left but if i try to download any more - or even move an image from phone to memory card - it tells me that operation failed! i did format the card and it didn't help
    help!

    try to reinstall your current firmware (after backing up all your important data first) or see if there is an update for your 6300 via nokia software updater. but i think there is a problem with your memory card rather than your phone, as can happen with normal USB flash drives when copying files to them, they suddenly give up and start giving strange errors. so maybe try replacing your card with a better quality new one.
    hope this helps

  • N96 Memory Card Assistance needed

    Hi,
    Can anyone give me the instructions how I can copy the data I have on 2gb memory card onto my n96 handset please.
    My girlfriend is after the card but she can't have it until I transfer this data over.
    Many thanks

    Hi,
    sorry, I don't understand what do you want to do. Backup data from memcard or send them?
    If you want to backup, there is a question, do you need them on your N96 or you want to store them just on your PC?
    If you want to let some data on your phone, then go to Menu-tools-device manager-memcard. After highligting data you want to let, select in options move to and choose where.
    You can do this after connection phone with your computer via USB cable or BT, or you can move it into your computer too. You should find your N96 device in windows explorer (first install Nokia PCSuite).
    You can do the same by putting card in SD adapter in card slot in computer or in card reader and connect it with computer.
    After all of this, format memory card. It empties and ereases all data. Your girl will have clean and ready to use memory card.
    Message Edited by hieronim69 on 04-Jan-2009 08:11 PM
    Message Edited by hieronim69 on 04-Jan-2009 08:12 PM
    N95 & N96 User

  • Transferring contacts onto memory card

    Hi there
    I want to sync 1200 contacts from Outlook onto my Nokia 6300. But when i sync my Outlook with the phone, only 1,000 contacts are synced. Is there any way of ensuring all my Outlook contacts are saved on the 2gb memory card in the phone?
    Cheers

    The limit seems to be 1000 contacts - doesn't matter where it's stored.  I had a Sony Ericsson handset (K750i) that had a limit of 500 contacts.  Heaven only knows why manufacturers impose these random limitations!

  • 2GB miniSD cards on the N73

    I have recently bought a N73 and a 2GB memory card for photos. With the card installed, the phone takes much longer to switch on (35 seconds without, 80seconds with) and the gallery program seems to take for ever to start.
    Is anyone else having problems with 2GB cards?
    Nokia 5800 v21.0.025 RM-356 (Orange profile- when will they update??)
    Nokia N73 (RM-133, OS v4.0735.3.0.2)
    Nokia N85- DONT BUY, front plate fell off day 3, back panel moves. VERY cheap construction.

    mine don't take that long. what it would do is install or load programs from the memory card, where it shows "initializing." if that what you are referring to, then this is normal.
    everything happens for a reason
    check out my blog @ http://mycellife.blogspot.com/

Maybe you are looking for

  • Macbook Pro not charging; do I need a new Magsafe Charger?

    I have an early 2011 13-inch Macbook pro. Recently, I've noticed that my magsafe charger does not charge my laptop. The light turns on (dull green, not bright like it normally is) and the power source is switched to the power adapter, but the adapter

  • How to combine XDCAM clips into one big file for import?

    Hi, I'm not sure if this is a basic question or just not possible... I'm on location and have to rush edit. I've not worked with xdcam before. Usually I would import all of the media in low-res (one tape at a time), see what I want, then re-import th

  • How to save a scanned pdf file that has been rotated?

    I scanned several pages of a book but I evidently did it upside-down.  I rotated the pages 90 degrees, twice, and then saved the document with a different name.  But when I open the new document, the pages are still upside-down.  How can I correct th

  • Do the History Panel or Command menu record items work in code view?

    I am using Dreamweaver CS6 version 12 on a 2.33 GHZ Intel Core 2 Duo iMac running OS X 10.6.8. When I attempt to use the History Panel or the Command menu items "Start Recordings" or "Play Recorded Commands" in code view they do not work. Can these t

  • How can I hide the main front panel when I run from the executable?

    Hopefully this is an easy question. I have an application where the front panel is not the main GUI and I would like to hide it when the program runs, but only when it runs from the executable. How can I do this?