2gb mini SD card, not able to read.
I know this has shown up a number of times but after looking for an hour and through around 50 posts i haven't found a solution, or anything to try either.
I have an N93 and it will read the 2gb card using file mgr. but when using camera it says it cant read the card and the phone memory must be used.. if i go into the settings and adjust it to my SD card it just kicks me out.. i then have to reboot the phone to get it working again.
Also when trying to add themes or programs using this card the majority of the time it says it's unsupported or corrupted.
I originally formatted it using th n93 software.
any suggestions please??
All mini SD card made the same, as long as it able to recognize by any card reader, is a good card.
When you insert into Nokia phone, some model could read it. It has nothing to do with the card. It's NOkia device problem. The hardware programmer forgotten to write and install format disk feature in case a miniDisk is not formatted to Nokia OS.
It's Nokia **bleep**py flaw. I will never buy another Nokia device again nor will encourage anyone do that in the near future until Nokia admit their problem and fix it right away or offer a patch for PC to do that so generic miniSD could be read.
I remember when cell phone just lauch, Nokia handset will warm-up almost burn your ears. I boycotted the company and encouraged my bell company do the same for better samsung. Nokia finally listen due to plummet sell big time during those couple years. Now, I'll do that again and encourage you all do the same to your bell company and people you know if Nokia fails to admit, apology and promise to fix the problem.
Sorry Nokia, I am **bleep** on you all didn't quit learn the lesson and listen to your customer.
Similar Messages
-
Not able to read the wsdl file from server Premature EOF encounter
Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PMHi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks -
OIM 11G-prepop adapters not able to read from User form
When I try to auto provision ldap account for users after creation of OIM record using GTC, the ldap provisioning doesnt happen. Basically the prepop adapters not able to read from Xel user form. I am stuck with this issue for a while now .
I tried remapping..ect etc..ntng helped.
None of the process form fields are getting prepopulated, when I hard coded avlue in prepop adapters for all the reqd fields in process form, proviosioning gets completed successfully.
Pls. help me with this.
Thanks.
~VSN
I get the below errorr:
<BEA-000000> <Class/Method: tcAdapterExecuter/executeRuleGenerators encounter some problems: java.lang.Exception: Error retrieving user info: User Login
java.lang.Exception: java.lang.Exception: Error retrieving user info: User Login
at java.lang.Throwable.<init>(Throwable.java:67)
at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(tcAdapterExecuter.java:205)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(tcPrePopulateUtility.java:1020)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(tcPrePopulateUtility.java:346)
at com.thortech.xl.dataobj.util.tcOrderPackages.computeProcessFormData(tcOrderPackages.java:901)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:423)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:177)
at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:563)
at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:303)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:283)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:104)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:35)
at sun.reflect.GeneratedMethodAccessor1831.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
at $Proxy284.execute(Unknown Source)
at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1035)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:686)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.notifyParentProcess(OrchestrationEngineImpl.java:828)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:771)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
at sun.reflect.GeneratedMethodAccessor2150.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy382.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Kevin,
For manual Proviosioning - It works fine.
It fails when I create user in OIM using flat file GTC . I have an access policy to auto proviosion that user with ldap.
As mentioned before, I notice none of the prepops on Ldap process form are able to read value from Xel user form.
Steps I tried Already:
1- Checking access policy
2-remapping process form adapters
Pls. let me know ur thoughts.
~VSN -
Superdrive not able to read DVDs or CDs
I'm having an iMac G5, running MacOs 10.4.3 with an Matshita DVD-R UJ-846. Since quite some time now I'm not able to read inserted DVDs or CDs. Either a dialogue box appears telling me I've inserted a blank disk or nothing appears and I have to find another way to eject the disk again. I have no clue whether the drive is ruined or I simply need another newer driver. Please, can anyone help? Cheers!
Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Sometimes, repairing permissions & restarting your computer helps.
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Make sure the DVDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
http://docs.info.apple.com/article.html?artnum=88338 What to do if your computer won't recognize a FireWire or USB device
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
TIP: Update your OS to 10.4.11 along w/all the applicable updates through Software Update. Any reason why you are using such an outdated OS? -
I am not able to read a barcode from a image
I want to read a barcode which is part of a big image on which i have to work on,i am not able to read the barcode as i have to give the correct ROI,which in my case has to be set dynamically,can any body help me in this
Please post an example image, and I'll try to help...
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License. -
Not able to read AddtionalResult.requirments
Hi,
am using the followwing code
voidaxApplicationMgr_UIMessageEvent(objectsender,NationalInstruments.TestStand.Interop.UI.Ax._ApplicationMgrEvents_UIMessageEventEvente)
if (e.uiMsg.Event ==UIMessageCodes.UIMsg_Trace)
try
intframeid;
SequenceContext seqctx = e.uiMsg.Thread.GetSequenceContext(0, outframeid);
if(seqctx.PreviousStepIndex >= 0)
Stepprvstp = seqctx.PreviousStep;
StepTypeprvstptyp = prvstp.StepType;
PropertyObjectstepPropertyObject = prvstp.AsPropertyObject();
String testid=String.Empty;
if (string.Equals(prvstptyp.Name, "NumericLimitTest"))
testid = stepPropertyObject.GetValString("Result.AdditionalResults[\"Requirements\"]", 0);
double lwlimt = stepPropertyObject.GetValNumber("Limits.Low", 0);
double measValue = stepPropertyObject.GetValNumber("Result.Numeric", 0);
String unit = stepPropertyObject.GetValString("Result.Units", 0);
am not able to read the Requirments by "testid = stepPropertyObject.GetValString("Result.AdditionalResults[\"Requirements\"]", 0);"
but am sucessful in reading all others.
can you please help me in this regards.
Thanks
IVIIVI,
please do not open new threads for the same topic......thanks
The discussion is kept there.
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Guys I am not able to read my subscription on the ipad. Everytime i press one of the subscription a box appears and when I press oK it keeps showing up.
"connect to itune store to use push notification"
Thanks for your helpYou welcome
-
I am using OS X Mountain Lion and I have this .avi file but not able to read. What is missing in my setup and what other file do I need to download to enable me to read? I can read mp4 files though.
Here is a link: https://itunes.apple.com/en/app/mplayerx/id421131143?mt=12
I agree that VLC is also a good choice but MPlayerX is more user friendly. -
Why is PC MS Word is not able to read MSword files from MAC?
Why is PC MS Word is not able to read MSword files from MAC?
What version of Word is on the PC?
What version of Word is on the Mac?
What sort of error message or other bad behavior do you observe? -
I am not able to read the xslt table column value.
Hi,
I have the scenario like this.
I have two irpt pages first.irpt and second.irpt and saperate xslt tables for each page and common js file for two pages.
when I click on first.irpt page xslt table row that opens the second.irpt as a popup window then I click on the column in second.irpt xslt row after that column value should be inserted in to first.irpt xslt table column.
In above I have done everything except I am not able to update the first.irpt xslt table column as Even I am not able to read that value.
For your reference:
/* This function will be called when we select the row in first.irpt xslt table here SelectBatch_b.irpt means second.irpt
function getBatch(row)
var id=row;
var material=document.getElementById('Material_'+row).value;
var location=document.getElementById('StoreLoc_'+row).value;
var plant=1000;
var strUrl = "SelectBatch_b.irpt";
strUrl = "?plant="plant"&""location="location"&""material="material;
window.open (strUrl,"mywindow");
/*This function will be called when we select the row in second.irpt (SelectBatch_b.irpt)
function getBatchID(row)
var Batch=document.getElementById('Batch_'+row).value; // reading second.irpt xslt table column value
document.getElementById('Batchc1').value=Batch; // reading first.irpt xslt table column value and inserting.
window.close(); // here I am getting error like object expected.
Please help me in this .
Edited by: rajkumar12345 on Feb 29, 2012 1:45 PMHi Rajkumar,
Please find below the method to pass the variable back and forth in .irpt page.
First Page:
var Toaccessinchildpage = "value";
function getBatch(row)
var id=row;
var material=document.getElementById('Material_'+row).value;
var location=document.getElementById('StoreLoc_'+row).value;
var plant=1000;
var strUrl = "SelectBatch_b.irpt";
strUrl += "?plant="plant"&"+"location="location"&"+"material="+material;
window.open (strUrl,"mywindow");
function populate(strBatch)
document.getElementById('Batchc1').value=strBatch;
Second Page:
function getBatchID(row)
var Batch=document.getElementById('Batch_'+row).value;
window.opener.populate(Batch);
window.close();
You have to call parent page function from child page.
No need to use common js.
If you want to access variable from parent page use
window.opener.<variable name>.
Example
window.opener.Toaccessinchildpage
You have to declare that variable as global variable in Parent page js file.
Refer First page code.
Regards,
Selva -
ASCP Plan Is Not Able To Read Global Forecast For Options Published By Demantra
ASCP plan is not able to read global forecast for options published by Demantra
ASCP plan is not able to read global forecast for options published by Demantra. Only Model Forecast is being read into ASCP plan.
1) We are publishing global forecast from Demantra at CTO/Zone/Week level and it is getting published properly to ASCP denorm table.
2)There is no forecast explosion being done in ascp (plan option explode forecast is not checked)
3)The sourcing rule is set at zone level for the model saying source from an organization (org code 11)
4) The profile: msc:-Organization containing generic BOM for global forecasting is set to 22 which is a reference org
5) Now when we run the plan the model forecast goes to org 11 but the option forecasts do not go properly
6) We have just one line created for the option (production forecast) with a wrong quantity
7) Demantra has forecasts for both Model and optionsLooking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh -
I have received icloud mail in Arabic langauge. I could not able to read. So what should I do to activate my icloud account. Is there any chance to get mail in English?
I'm not positive about this, but I'd guess that the voicemail service is with your cellular provider i.e. will work w/o the phone instrument.
Doing the "remote lock" should not AFAIK prevent Find My... from working. But it might discourage a thief and cause him to turn it off before iCloud can snare its location? I'd have guessed NOT i.e. that it would register instantly, but I dunno how fast that works.
In any case that's your only hope at this point, to monitor your email and see if a "Found!" is received. If it were me, I'd use my netbook to check email all night long and wake me if one comes in. Good luck, and report back! -
T520 not able to read Kingston 8 GB SDHC
Hi
The problem is that my T520 is not able to recognize a Kingston SDHC (SD10V)
I have no problems reading the SDHC in other devices (Camera and MacBook). I also have no problems reading other SDHC cards in my T520, have though only tried Class 4 and Class 6 cards.
Does the T520 have problems reading Class 10 cards?
I would like to know this before we go and buy other Class 10 cards.
We have tried with 2 different SD10V cards in 2 different T520's with the same result.
/JensHave you tried updating the drivers for the card reader? I would make sure you are running the most recent version.
-
Not able to read a .wav file after firefox 19
hi,
My application which is a voice messaging solution, takes a wav file from the desktop , upload it to the server then send it to the other user.
The problem i am facing is: firefox 20 onwards , browser takes the .wav file from the desktop , uploads it to server, but after uploading it is not able to send it to user. I analyzed the request my application is sending, i found that the content size comes out to be 0. Content only contains the file name and the wav file.
I checked the release notes of firefox 20 also, which says there were few enhancements and features were introduced in this release. Also there was a bug regarding the UNC path which was resolved in firefox 20.
Can anyone please tell me, what i might be missing here.
Or is there any change regarding the wav files or how files are accessed .I do not know how the sending portion of you application works, however when there is no content
Viewing these files in the browser:
[https://support.mozilla.org/en-US/kb/viewing-html5-audio-and-video]
This bug:
[Also there was a bug regarding the UNC path which was resolved in firefox 20. ] what was it? -
Proxy-Not able to read from socket for browser IE only for authorized sites
Hi,
I have implemented proxy server using socket connection. For Mozila it works properly, but not for IE.
First it asks for proxy authentication, after providing the username and password for proxy in mozila its asks authentication for the authorized sites and its working properly. But in IE it just ask for proxy authorization and gives error as "you are not authorised to view this page" internally when I went through the code only first time its able to read the request and gives the response, but for the authorized site it wont ask for the username and password. After some time it throws the "Socket connection: reset" exception.
Creates the connection:-
while(running){
try{
clientSocket = serverSocket.accept();
}catch(SocketException se){
se.printStackTrace();
try{
new HttpClientConnectionHandler(sockCon);
} catch(IOException se) {
se.printStackTrace();
}Sends requests and gets the response:-
boolean continueSession = true;
try{
SCConnectionManager.increementConnCount();
while (continueSession){
continueSession=false;
HttpHeader request = rqHandler.getRequest();
String con = request.getHeaderValue ("Connection");
boolean clientPersistentConnection = false;
String pcon = request.getHeaderValue ("Proxy-Connection");
System.out.println("request = "+request.toString());
if( ( request.getHTTPVersion().equalsIgnoreCase("HTTP/1.1")
&& !( pcon.equalsIgnoreCase("close") ) )
|| ( request.getHTTPVersion().equalsIgnoreCase("HTTP/1.0")
&& ( pcon.equalsIgnoreCase("Keep-Alive") ) ) ){
//tempComment debug("CLIENT Keeping connection true !!!!!! ");
clientPersistentConnection = true;
resHandler.Handle(request); // Returns boolean ...can check its value...
if ( clientPersistentConnection == true && resHandler.connectionPersistent == true ) {
//tempComment
debug("SERVER Keeping connection true !!!!!! ");
continueSession=true;
if ( resHandler.surfAsServer == true ) {
client.setTimeout( persistentConnectionClientReadTimeout );
debug("CONTINUING CLIENT CONNECTION "+continueSession);
System.out.println("out of while loop continue sess = "+continueSession);
}catch(IOException ioe){
log(ioe);
if(qlc.qsm.log.Logger.debugOut) {
ioe.printStackTrace();
} finally {
synchronized( this ) {
int connCount = SCConnectionManager.decreementConnCount();
SCConnectionManager.updateLastRequestTime();
close();
}It does not come out of above while loop.Sorry, while copy the code one line was missing.
code is:-
while(running){
try{
clientSocket = serverSocket.accept();
} catch (SocketException se) {
se.printStackTrace();
continue;
}catch(IOException se){
continue;
try{
SocketConnection sockCon=new SocketConnection(clientSocket);
new HttpClientConnectionHandler(sockCon);
} catch(IOException se) {
se.printStackTrace();
if ( clientSocket != null ) {
try {
clientSocket.close();
} catch ( Exception exc ){
clientSocket = null;
decrementHttpCount();
}
Maybe you are looking for
-
DVI - Sony TV doesn't work: PAL vs. NTSC ???
I'm trying to connect my MacBook Pro via a DVI->HDMI cable to a Sony HDTV (KLV-V32A10E). The Displays Preferences detects the second display ("SONY TV"), but the TV remains blank. Interestingly enough, none of the preferred suggested resolutions (i.e
-
External vga, monitor recognized, still no display
I have a L R60 9461-DXG, with Win7 (32bit) running very fine. Now trying to use an external monitor (L171p) but nothing works. While in boot and in combination with Fn+F7 the display doesn't come up (staying in power saving mode). In Win7 the externa
-
Windows Server 2008 x64 on Bootcamp: Ethernet drivers missing/not working
Hello folks, at the moment I try to get Windows Server 2008 x64 running on a new Mac Pro (Early 2009). Installation of Windows Server 2008 x64 (Enterprise) worked out of the box. However, the ethernet drivers do not work. Ethernet cards are not detec
-
When I try to save my home pages / tabs, I can't, because this option is greyed out. I even uninstalled FF with Revo Uninstaller completely, reinstalled with no new plugins or extensions, and it remains greyed out. The only thing that I can do, is pi
-
New to this. What do I need to show my Office 2010 tasks on my Ipad? I successfully synced contacts,notes,and calender but do not see a "tasks" application.