2GB SD card shows only 1GB after formatting

I've formatted 2GB flash card using this utility. After this operation card had a strange file system, so I've foramtted the card using windows utility and card is visible as 1GB flash card.
How can I foramt this card as 2GB?

I have found some information that to solve this issue, you need the Toshiba SD Memory Card Format Utility V2.1.0.0. If you use an older version of the Toshiba SD Memory Card Format Utility and you format a 2GB SD card, this leads to a formatted 1GB SD card.
Solution:
1. Uninstall the old version of Toshiba SD Memory Card Format Utility from your computer
2. Download the Toshiba SD Memory Card Format Utility V2.1.0.0
3. Install Toshiba SD Memory Card Format Utility V2.1.0.0

Similar Messages

SD-card partitions only shown after starting gparted

Hello,
I'm experiencing a really strange problem: Whenever I insert a SD-card into my USB-card-reader no partitions are shown in Dolphin. But when I start gparted the partitions will be shown in Dolphin. Does anyone know how to debug this problem?
Before gparted is started only /dev/sde is shown. After starting gparted /dev/sde1 and /dev/sde2 are also shown.
Regards
Martin

many card readers don't notify the OS of media changes so the kernel does not know to check and re-read the partitions
this also happens for some card readers with click-in mechanism, if you put the card in without actually letting it "click" (which triggers the media change event)
card readers are weird that way but then you can get them for under $5 ... *shrug*
I also have the same issue with my (stone age) android smartphone... the PC sees two cardreaders as soon as you plug it in but the data on those cards is only available after you confirm it on the phone, and the PC does not really manage to update its mappings (/dev/disk/by-uuid and such) for the device when that happens, thus mounts fail [or wake up all other disks searching for the uuid] until you trigger reads from these devices some other way.
My workaround (for card readers) is simply... I unplug the entire reader whenever I switch cards... it's detected fine with the card already inside the reader as you plug it in.
Maybe there is a better solution - I haven't come across it yet.

E61i - 2GB Memory card showing as 242MB, not full ...

I have put a new Sandisk 2GB Memory card into my E61i. It only shows up as 242MB. I reformatted it with the phone with no success at accessing a full 2GB. What is going on? Did I miss something?

I do not know. Brand new, and no friends with similar connection.
I did call the company I bought it from and they sent me a second card. It reports exactly the same amount of memory. Maybe it is an incompatible brand? I don't know. I just want the memory to work. My original thought was that maybe it was just not able to read it all in one go, but this really made no sense since Nokia says it is 2GB compatible. hmmm.

MSI 2GB D5 X GTX660 GAMING desktop shows only background after driver instal

Hello all and thanks for reading,
[I'm not sure if I put the right product name down in the title but it's the mSI N660 GAMING 2GD5/OC video card]
After trying to instal the driver for my newly purchased video card the problem started. I've been trying to solve the following problem for days and at my wits end. Any help would be much appreciated!
What I've done is
-a clean install of Windows 7 Ultimate
-installed my motherboard driver from cd
-let Windows update get the first chunk of updates (around 100-150) which includes SP 1
-installed the driver for the MSI video card, trying several; MSI Graphics driver 320.49 from this site, the NVIDIA graphics driver from this site, (both suggested for my product + Windwows 7 32bit), getting the 334.89 driver from the NVIDIA site, or getting a NVIDIA driver through Windows Upgrade. All have the same result;
The driver installs and promps a system restart. After restarting, I get through the Bios, the Windows loading screen and proceed to my desktop. I see the background, but no icons, no toolbar on the bottom of my screen, just nothing exept my mouse's position. When I rightclick, the option to show icons and such is already ticked. When I press Control+als+del I get a bland black screen with no (visible) option of taking any action or starting a command prompt. I can't do much then except do a system recovery to an earlier point.
I've been trying to solve this for many a times with different approaches, but they all net the same result. I've not found a solution through various google searches, nor found a solution in the stickes on this forum, or a search. If I overlooked one, apologies.
If anybody can help me, you'd be a godsend and I'll praise your name for days!
Sincere regards, Thijs
I know a little about computers but am hardly an expert. Took me a while but I put together this list of my computer:
Windows 7 Ultimate, SP 1, 32 bit
Motherboard: ASUS/ASmobile P5 Motherboard P5B
Processor: Intel Core 2 Quad CPU Q8300 2.50GH 64 bit (times 4)
RAM: OCZ 2x2GB 1066-555 Reaper (a scan told me DDR2 DIMM PC2-6400)
Videocard: MSI N660 Gaming 2GD5/OC. A newly bought Twin FROZR.
Hard drives -- C:/ Western Digital WD Green WD10EADS 1TB 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive Bare Drive
D:/ Hitachi Deskstar T7K250 HDT722516DLAT80 160GB 7200rpm 133MBps Ultra ATA/133
E:/ Seagate Barracuda 3TB 7200RPM SATA 6Gbps 64MB Cache 3.5-inch Internal Hard Drive
CD/DVD station - Samsung DVD-ROM SD-616E ATA Device
Power: CoolerMaster RealPower M 520W ATX2 powersupply, I didn't see a line of 3 voltages etc mentioned on the sticker but this is the readout:
+3.3V +5V +12V1 +12V2 +12V3 -12V -5Vsb
25A 20A 19A 19A 19A 0.8A 3.5A
I hope this is sufficient
I never tried anything with overclocking so don't think there's much too mention regarding that.

Previous to installing the driver there was none on my system, due to the clean install (to my knowledge, that is...). I´ve got Driver Fusion now, if needed in the near future.
Bios (an area I am very new to):
According to system information, my bios runs a version dated 4/11/2009
According to a downloaded program, AIDA32, my bios uses: AMI system bios dated 11/04/2009 and vbios dated 06/02/2009.
This is what the manufacturer's site mentions about different versions for my type of motherboard:
http://www.asrock.com/mb/Intel/P5B-DE/?cat=Download&os=BIOS
--> I fear I don't know enough about these to know if this is horribly outdated, or not : )
Nearing 5 years is old, but according to some forums, not -too- old
S/N of the new videocard: 602 -v287-35sb1311067308
Regarding your last question, I hope the link above gave you the file. I'm not sure how to provide it otherwise.
You're a blessing man, thanks a lot!!

128GB sd card showing as 1gb in disk utility, when it shows at all

I have 10.8.2 on a 2011 mac air. i have a lexar professional 128gb 400x sdxc card which is full of stuff that I generally read (don't write much to the card when it's in) - big videos, big photos, by design & icon library, etc.
this morning at home I put some files on it, and closed the lid of the mac, then carried it to work. opening the lid and the device no longer shows. i had a system lock due to an app that does it regularly, so I power-buttoned it.
the device took 5-10 insertions to get it to even recognise that a card had been inserted. Disk Utility now sees the disk as an unformatted 1GB memory card, whereas it is in fact a 128 GB single partitioned MacOS formatted volume.
i don't have another mac to try this on, nor do I have another sdXc card, is there any debugging steps I should take to determine if it's the reader or the 2 month old card?
also, if it's fritzed, what is the best rescue utility for me to try?

I had tried a few different utilities under different conditions to see what was going on. These, in particular:
On Mac, I tried disk utility (of course), disk drill, lexar image recover 4, and the command line partition editor
I looked at it with partition editors on XP and Windows 7 on a new PC
I looked at it with partition editors and recovery tools on Ubuntu on a laptop with SDXC card support
Basically the unit seemed to just be wrong. And then I found a forum (no longer know the link) that mentioned that when the partition map of a sdXc card is messed up, you're pretty much out of luck with it. I think this is what happened. Eventually I managed to convince the memory company I got it from to give me a replacement under warranty, and the replacement had been so-far-so-good.
I lost everything on it, after trying for weeks to recover it.
Warranty might be your best option, I'm afriad.

MMC card and MP3 player - 1/2 capacity after format?

Hi,
I got an MP3 player (1 Gb) and a MMC card (2 Gb) and after format in a USB card reader from OS X 10.4.7, they are now 512 Kb and I Gb respectively. MS Dos or Mac format doesn't matter.
Is it a USB 1 or 2 problem?
Any one know about this?
EF

Well I have solved the problems and I post here in case others encounter them.
The MMC/SDC card was fixed by getting a true USB 2.0 card reader, the one I had was about USB 1 & 5/8 ths.
The MP3 player was a rip off, sold as 1 Gb but really only 512 Kb see:
http://forum.s1mp3.org/viewtopic.php?t=873
cheers
EF

1gb graphics cards vs 2gb graphics cards in PS5.1

What is the advantage of using a 2gb graphics card over a 1gb one. Is it say when I am opening many images say over 20 if i have a 1gb card it will start to use system memory where a 2gb will use more of its own?

Using a 2GB Graphics card will mean you will have more dedicated memory for task related to rendering images, while allowing Photoshop still use system memory for everything else. For example if you have allocated in your preferences for Photoshop to use 4GB of your 6GB of system memory and you also havea 2GB Graphics Card, then the total resources Photoshop has available for all task is 6GB, 2GB dedciated specifically for rendering, animating, zooming shading, 3D graphics, rendering filters and so on.
This also means you have more multi-tasking power. Most people will tell you that Photoshop is CPU heavy and not GPU heavy so that more RAM and better Processors are more important than your video card. However what they are neglecting is that any resources you free up are to your advantage, so any CPU and RAM that the GPU free's up means its more for you to use elsewhere. Make sense? The more overall power you have at any level means that resources can be spared accordingly.

Formatting 2GB SD card with FAT32 using Disk Utility

Hello
I'm trying to format a 2GB SD card in a card reader/writer to FAT32 using Disk Utility. Unfortunately the only option available under the Erase button is "MS-DOS File System (FAT16)". I need to do this to upgrade the firmware in my Sony TV which requires a FAT32 formatted USB device.
Any help or suggestions would be greatly appreciated.
Thanks
Tim
P.S. Unfortunately I'm stuck in OSX Tiger on an old B&W G3 while my G5 undergoes repairs.

Tim Goodwin wrote:
Ok, well anyone know of a free OSX 3rd party utility that will enable me to format the SD card to FAT32?
Unfortunately I don't have a larger SD card.
I tried my 1GB SD card on a XP PC and I'm not given the option of FAT32. So it may be a limitation of the SD specification, which means you may just need to bite the bullet and buy a larger SD card.
Perhaps you can ask Sony if there's some setting on your device to use something other than a FAT32 SD card. (I mean, this is Sony after all, you'd think they'd prefer Memorystick. )

How do you pay for apps using an iTunes gift card. I have money on a gift card but only my credit card shows up as method of payment.

How do you pay for apps using an iTunes gift card. I have money on a gift card but only my credit card shows up as method of payment.

After establishing the Credit Card account (i.e. after you have made purchases), you can remove the credit card information by editing your payment info, choosing "None".
Settings>iTunes and App Stores>Apple ID>View Apple ID>Sign-in>Payment Information

Only show certain fields after a date has passed

How would I set a recordset to only show certain fields after
a date has
passed?
For example:
I have a list of classified adverts some which include an
image which the
client pays extra for. After a certain time period, say, 1
year,
would it be possible to use some kind of IF statement (or
something) to no
longer show the image?
Thanks
Gary

scrap that entire post man.
I'll rewrite it here in a few.
"crash" <[email protected]> wrote in message
news:[email protected]...
>
OK. I can't be as much help as I was hoping, since I
just did this in
> PHP and MySQL. But we can do a bit. My ASP is rusty
enough I'm just going
> to give you what I think you should do.
>
> You'll need to research how to format dates and most
importantly strip
> away the timestamp. In MySQL, you can format the date as
it comes out of
> the recordset. I'm not sure if you can do this in
access, but I would
> imagine that you can (indeed, it might be the same SQL).
>
> <%
> varToday = Date (should be able to format out timesteamp
here);
> varTerm = 365; 'This will be your constant term, defined
in days, it looks
> like from archived posts
>
> varExpiredDate = varToday = varTerm;
>
> Search your recordset via varTerm. ie
> WHERE datefield < <% varTerm %>
>
> You will need to search date formatting in Access to see
how to strip out
> the Timestamp from your date, but you should be able to
do this from your
> SQL statement, and return just the date, this will be
compared to your
> varTerm, which basically states that if your signup date
is beyond a year
> from today, your ad will need to be renewed.
>
> I"m not very happy with this, but it's all my brain is
coming up with
> right now. Gimme a few to review it and I might have
something more for
> you.
>
> HTH, sorry I couldn't give you code or urls for date
formatting.
>
> Additionally, you will eventually need to build
somethign that checks
> images and and dates and then sends an email to your
customer letting them
> know their term has expired.
>
> OR - You could also add a new field to your database
which automatically
> updates an "expire" time in your ad table which
automatically adds days to
> the time. If you do this, you don't have to worry about
stripping
> timestamps or anyting, and you can just do a simple
lookup for if Date >=
> DateExpireField then don't pull image.
>
>
>

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

I want to order a second copy of an iPhoto book. Thought created in the smaller format only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

I want to order a second copy of an existing iPhoto book. Though created in the smaller format now only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

To change a book size duplicate it (select the book in the source pane and press command and D) since text flow and picture placements can change due to the size differences - then click on change themes, select the same theme and the new size
check it carefully
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

After updating to ios 8.0.2 .when i'm unlocking the mobile wallpaper dont display . its shows only network and battery status .

after updating to ios 8.0.2 .when i'm unlocking the mobile wallpaper dont display . its shows only network and battery status .
then i need to switch off and switch the iphone. per day i'm doing this for 3 times.
mean while if some one calls ,its not displaying who is calling.
need to rectify this ASP

Hi Tarun 49,
If you are having issues with your iPhone such as you describe, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

2GB SD card shows only 1GB after formatting

Similar Messages

Maybe you are looking for