2ht - HyperText Home Theater

I want to start a new project.
The project is a web-based media center built in web2py.
Playback will done on the machine hosting the application (hereafter referred to as the HTPC). It is not intended to be used for websites that stream all your media. The HTPC hosts the web-server on the local network. Any device on the network with a web browser should be able to control the HTPC through the web application, including the HTPC itself, or any smart phone or tablet.
By default, there should be a core set of features for basic functionality. The application also needs to be extensible, using components and plugins.
Arch is obviously going to be the target OS, since this would be best used with standalone WM setups where a web-browser is launched on the HTPC with a homepage set to the web application. With that said, there's no reason why it shouldn't work with other distributions.
I am hosting the project on Github.
Let me know if you are interested. I have spent some time on a similar personal project myself, but I wanted to start over, making it a community project from the beginning.

Hey AnastasiaMaier,
The answer given you by autotech796 is correct. The cost of home theater installation can vary greatly, depending on the client’s specific needs, the placement in their home, and the condition of that space.
We do sell a Home Theater Consultation service for $99.99; in this service an agent will come out to your home, to evaluate the space for your specific needs, in order to make sure you purchase the correct service and products. The cost of the Home Theater Consultation service is redeemable on any future home theater purchase $499 and up.
Thanks for posting,
Allan|Senior Social Media Specialist | Best Buy® Corporate
 Private Message

Similar Messages

  • Desktop/Finder keeps rebooting after upgraded to Maverick (mac mini hooked up to a home theater system)

    My desktop keeps rebooting ever since I upgraded to Mavericks.
    Current setup, Mac Mini hooked up to home theater (Panasonic SC-HTB20) that is then hooked up to my Panasonic Plasma TV.
    I usually leave my Mac Mini on running and at least once a day when I turn on the TV I can see that my desktop was rebooted. Firefox and Chrome will say that it wasn't shut down properly and if I want to restore my previous session. Also some times when I switched the input to watch TV and switch back, all my windows will be scattered out of place. For example Chrome will be in the top left hand corner to the point that it's almost minimized and I wouldn't be able to move it as well. Only thing I can do is close out these applications and relaunch them. It doesn't appear that the OS actually crashed, but more like the desktop/finder itself crashed. Cause once in a while I will switch back or turn on the TV and the screen will stay black for a few minutes then I'll see the cursor in the top right hand corner. After that I will start to see the desktop and my application start loading. It doesn't go through the regular process of rebooting where you see the Apple logo so I don't think the OS actually crashed but I could be wrong.
    For some reason it seems like Maverick doesn't like the home theater system. An almost guarantee way to reproduce the issue is to wait for the home theater to turn off after it's been inactive for a while. If I turn it on the home theater to have the audio coming from it I will see the desktop goes black immediately then the whole desktop reboot process I mentioned above will kick in.
    Never had any of these issues on 10.7 before I upgraded to Maverick.
    Anybody have any suggestion? I really don't want to format and downgrade back to 10.7.
    Thanks

    Sounds like a kernel panic.
    If you post the report we could have a go at deciphering it.
    It would be in /Library/Logs/Diagnostic Reports.

  • How to Connect My Apple TV to My Panasonic SC-PT760 Home Theater

    Hello;
    I currently use the Panasonic SC-PT760 as the Home Theater DVD Player which only has 1 HMDI output and connects directly to the HD TV, also I have the Direct TV connected to the Home Theather via AUX.
    I am wondering how should I connect my apple TV, if I would like to connect ut via HMDI. Is a HMDI switch an option or what should I do ?
    Please advise.

    You can purchase HDMI switches but don't expect them to work perfectly in _every_ configuration. What I mean is that your mileage may vary, it may work, or it may not. However, chances are good that it will but I'd make certain that you can return the HDMI switch if it doesn't work correctly when paired with you DVD player and the Apple TV and your HDTV.
    By the way, does your TV have component inputs? If so you can use the Apple TV's component outputs to get HD but then you'll have to route the audio from the Apple TV either over standard RCA stereo plugs or via the digital audio optical connection on the Apple TV (assuming again that your HDTV has optical audio inputs, but I see that you receiver has an optical input so that should work too).

  • How to connect a apple tv to a panasonic sa-pt860 home theater sound system?

    how do i connect my apple tv to a panasonic sa-pt860 home theater sound system? Having no luck, what leads do I need please?

    Welcome to the Apple Community.
    Does it have HDMI inputs and outputs.

  • How to connect Apple TV to projector and home theater system?

    I have an Optoma HD20 projector that I have a long hdmi cable connected to and plugged that into my Apple TV. I also have an older home theater system that does not have an optical audio input. So I bought an adapter to go from optical audio to RCA cables. When I get it all plugged in and turned on I can't even get the video on my screen. What am I missing?
    This is the adapter...
    http://www.amazon.com/gp/aw/d/B005F20756

    Darn. Ok. Then do you have any suggestions for other options to connect the two? My projector is mounted to the middle of the ceiling with a whole for the wires that go along inside the ceiling to the other side of the room.

  • IMAC =HDTV&HOME THEATER

    How can i connect my IMAC to both HDTV(LG) and LG surround system (home theater) and get everything to work as one i.e IMAC to work on both TV & SURROUND SYSTEM. I got HDMI cables . I will appreciate  your help.

    I don't think it work work for HD, at 800 MHz G4. Not enough graphics or CPU processing power to display HD at full screen without a lot of dropped frames.
    Also, there is no way to connect a digital display over HDMI. You may be able to get acceptable standard def results with connecting it over VGA or other analog connection, but I believe an iMac G4 only mirrors the built-in display. So it may be stuck at 1024x768 as the max resolution. A typical HDTV's native resolution is 1920x1080.
    You should test the output from the mini-VGA port using a regular multi-sync CRT display, if you happen to have one collecting dust or know someone that has one. See what resolutions you can achieve. You won't get any better if you connect it to an HDTV.

  • How to connect mid 2012 MacBook Pro to home theater system

    Okay so I'm looking at purchasing a home theater system and was wanting to know the best way to connect my mid 2012 MacBook Pro to the home theater system and TV. I am wanting to play both movies (Netflix etc) and music. Will my MacBook play 5.1 surround sound to the home theater system? Whats the best way to connect this all up? MacBook audio to the home theater system via Digital Optical from the headphone port with a 3.5mm to toslink adapter and then video to the TV via HDMI cable from the thunderbolt port with thunderbolt to HDMI adapter? My thinking was to separate the video and audio to get the best picture and sound. Any help/advice on this would be greatly appreciated.

    Will my MacBook play 5.1 surround sound to the home theater system?
    Yes.
    Whats the best way to connect this all up?
    An AppleTV or any AirPlay-enabled AVR. AirPlay is wireless, though you could use wired Ethernet if you want to avoid all the potential problems associated with wireless. Make sure it specifically says AirPlay which is Apple's proprietary technology. There are quite a few of them to choose from today. Denon is one, I believe Pioneer, there may be others. Shop around. The AppleTV's price was recently reduced to $69 US and may actually be the most cost-effective solution, allowing you to research the best AVR for your needs. The AppleTV has both HDMI (audio and video) and optical audio outputs.
    MacBook audio to the home theater system via Digital Optical from the headphone port with a 3.5mm to toslink adapter and then video to the TV via HDMI cable from the thunderbolt port with thunderbolt to HDMI adapter?
    Way too complicated But if you really don't want to use AirPlay, you can purchase an inexpensive (< $10) Thunderbolt to HDMI adapter and an equally inexpensive (<$3) HDMI cable to any HDMI input on your AVR.
    My thinking was to separate the video and audio to get the best picture and sound.
    It makes absolutely no difference. HDMI and optical audio use completely identical digital audio signals.

  • Help on purchasing a Home Theater System...

    Hi everyone,
    I just bought a new HDTV and I am now looking into getting a good Home Theater System, since as I'm sure you all know, the speakers on my TV are pretty pathetic.
    But in all honestly, I really don't know much at all about speakers and home theater systems, so that's why I'm here.
    I hear that most home theater systems come with DVD and Bluray players, but I don't need either of those, since my ps3 and 360 give me 2 DVD players and a Bluray player already.
    I am really looking to spend less than 400 bucks, or around that area if possible.
    I also have one question: My HDTV only has 2 HDMI ports and one Component port and since I am using both of those (HDMI is being used for the cable and ps3 and component is used for my 360) I am wondering if there is some other way of connecting the Home Theater System?
    Thanks in advance for all your help.
    Solved!
    Go to Solution.

    paulmohr wrote:
    Ok after looking at the manual for that reciever this is what I come up with.
    One HDMI cable running from your PS3 to the reciever (BD in would be my choice)
    One HDMI cable running from your Cable box to the receiver (dvd in would by my choice)
    Now for you Xbox 360 you said you have the component cables for it, from what I can tell you can also get an HDMI connector as well. What you choose is up to you but this is how it would work.
    Xbox with component cables:
    Since the receiver doesn't have component swtiching you would have to hook the xbox up to your tv with the component cables ( the way it is now).
    Then run an optical audio cable from the xbox to the receiver SAT optical in.
    If you get the HDMI cable most likely you would just run the HDMI cable from the Xbox to the receiver like the other components. If you went this route I would hook the xbox to the dvd hdmi in and the cable box to the SAT hdmi in though. Honestly it doesn't matter but it just might be less confusing that way.
    Then you would need on optical cable running from the TV out to the TV in on the reciever. If you never watch regular tv you don't need this since the sound will come from your cable box anyway. But if you also have the tv hooked up to an antenna or something this will send the sound to the receiver.
    And one HDMI cable running from the Receiver out to on the HDMI inputs on the tv. This is what will carry all of the signals going into your receiver to your tv.
    And then the speakers connections which should be described in the instructions for the receiver. Just make sure the polarity is right when you connect them.
    This configuration will let you control most or all of the components through the receiver since it switches most of them. Just choose the correct input and the tv will display it.
    Okay, so according to that, I would need 4 HDMI cables to my HDTV, which would be impossible.... Unfortunately, my new HDTV only has 2 HDMI porsts, so is there a way to get around that issue? If I use HDMI for the ps3 and HD cable box, then is there a way to hook everything else up (including the reciever) without HDMI?
    Thanks in advance.

  • Dolby DIGItal HOME THEATER cannot be installed after upgrading to Windows 8.1

    Hi there,
    today i was forced by microsoft to upgrade from windows 8 to windows 8.1 I have problem with installing Dolby Digitial Theater Home app. I unistalled previous conexant drivers (windows 8) and installed new conexant (for windows8.1). I removed dolby. Then i went to C/Drivers/WIN/Audio/DolbyGUI/ there is setup.exe, dolbydigitalplusAA.msi and dolbydigitalplusHT.msi. THe setup.exe doesnt start installation, plusHT(home theater) gives message saying - cannot installed due to an error. However I can install dolby digital advanced audio, but I want my Home Theater back!!!! Can you please help me resolve this matter.... thank you
    I have lenovo edge E531 with 8gb ram, intel core i5-3230M 2.6GHz, GeForce 740M

    hi sotim01,
    Thanks for posting!
    1. Uninstall all components,
            Open Device Manager and Uninstall your Conexant audio under Sound and ganing controllers (make sure to place a check under delete driver software for this device)
    2. Open Control Panel Uninstall a program and highlight the dolby component and an Uninstall button will appear.
    3. Open your C: drive and Delete any folder that says drivers if non then continue with the next step
    4. Download this Driver for installation
            Conexant Audio Driver  
    Install it and continue
    5. Open Drive C: now and you should have the Drivers folder back.
          Open that, Open Connexant Open Dolby Gui,  then you should have Dolbyaa for Advanced audio.
    Restart your PC and there you go!
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Can I connect my iMac's iTunes library via wi-fi to my Blu-Ray player so I can listen to the music on my computer with my home theater system?

    My music library is on my iMac, located in a different room of the house than my home theater system with a decent Denon receiver and good Infinity towers. I have an iPod connector to the Denon which I can use, but the iPod has a limited library of songs, so I would like to somehow access my iMac music library and be able to play it through the home theater system. Hard wiring the components is out of the question due to length of run through several rooms of the house, no basement and cathedral ceilings. I already have my iMac and my Panasonic Blu-Ray player both connected to my wi-fi, and it seems there should be a way to connect both of them using the wi-fi. The blu-ray player is DLNA, but the Mac isn't, so that is out of the question. Is there any other way to get these components to talk to each other over wi-fi?

    There is a DLNA media server called MediaLink that is designed for use with the Play Station 3.  It is not advertised as working with other DLNA clients but it usually will.  I use it to stream audio, video and pictures to a WDTV media player in my bedroom.  Works great, even supports iTunes playlists.  I believe it still has a free trial period so you can see if it works with your player.

  • How do I connect the ipod nono 7th gen. to Panasonic home theater sound system

    I ordered an ipod nano for my daughter for christmas as her old original ipod died. She has a Panasonic home theater sound system (SA-PT950) that came with a little dedicated ipod station to connect her ipod to and get surround sound music. Now I see the 7th gen. nano has a different interface and won't work in this station. Is there an adapter available or does anyone know another way to connect it? Thanks

    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=72

  • How do I connect the Apple TV to the home theater if the optical audio port is in use

    I had an airport express connected from the home theater system to the speaker out port on the express through which air play worked just fine. Then the express wouldn't work with my new router so I looked for something to replace it. The new Airport Express was the same price as the Apple TV and so I went with it for the added HDMI from NetFlix benefits. Now I find that the cables I used on the express won't work on the Apple TV. It wants an optical cable but there is only one port on the speakers and it is needed to get the sound from the TV to the speakers. So, is here a work around? An adapter or something? What I really wanted it for more than anything else was to use air play to get my music from the computer to the theater speakers.

    I have a further question about this. It turns out I do have 2 optical audio ports but I was told I wouldn't need it if it was connected via hdmi. I have 4 ports and they are all in use so the question is whether the best solution is to just get an optical audio cable and connect it directly or get an hdmi splitter so I can add in the Apple TV?

  • Connection Error with iPod mini to Bose Home Theater System

    When connecting my iPod mini to my Bose Home Theater system, it recognizes that iPod has been connected, but after the "Acquiring Signal" process, it gives me an "iPod connection error. Please re-insert iPod into docking station." I tried several times, but the result is the same.
    My iPod mini has been updated with the latest software, and I did a system restore to return everything to factory defaults, but still no luck.
    Any suggestions.

    Hi. What you need to do is Launch DVD Player. Go to Preferences. Select Disc Setup tab. In Audio Output under Audio in the second part of the menu, select Digital Out-Built-in-Output. Then click OK. See if this works, 'cause mine does.

  • How to set up connection for directv receiver, TV, and home theater system?

    Can some one please show me the CORRECT way to connect my Directv receiver (it has no HDMI), Panasonic Viera HDTV (has 3 HDMIs) and my Samsung home theater HT-Z510 (has 1 HDMI)? The second question is with the set up that you advise, can I play the TV sound through my home theater speakers? and How do I do that each time I want to listen the TV sound through my home theater speakers? I am new and confused about all this so please provide or explain step by step please. Thanks in advance.

    Making sense of your connections on a message board is never easy. Hopefully you can piece this information together.
    Direct TV box to Panasonic TV using S-video cable....assuming it's standard definition. Component video if the box is HD. Run standard stereo RCA cables to the appropriate input for sound threw the TV speakers.
    Your Panasonic TV will have a set of stereo(left/white,right/red) outputs. Run cable from that output into the same inputs on the Samsung surround unit. Use the sound units effects to acheive simulated surround. This is assuming you have no digital outputs on your box. If you do, you'll be able to get 5.1 when available using a digital connection.
    Good luck.
    Disclosure: Former BBY employee.

  • NEED HELP --- hooking up tv, cable box, home theater

    60" Samsung smart TV --- contains several HDMI inputs
    Time Warner HD cable box --- contains 1 HMDI input; components as well
    LG Home Theater in a box, Model #BH6820SW --- contains 1 HDMI output, red/white aux input, & yellow video output.
    Very simple...... I want to turn my TV on, change channels with cable box remote & have my sound from TV come out of this home theater in a box I just bought.
    I've been at this for hours and I'm ready to take it back because of the ongoing frustration. I have 3 HDMI cables to use (which obviously I won't need all of them), I have a red/white audio cables and a yellow video cable to use if needed.
    Can someone out there PLEASE explain how this can be done?????????
    Thanks.

    You may be able to do it by running a Digital Optical cable to the Digital optical input on the LG from the TW Cable Box, and a seperate HDMI cable to the TV from the TW Cable box.
    Honestly though, I'd take it back and get a an AVR with HDMI switching, a set of speakers, and a standalone Blu Ray player. It'll cost more, but you'll get a better feature set, better performance, and more flexbilty to add more devices down the road.

Maybe you are looking for