2K8R2 Domain Controller not Starting when isolated

Hello. I am having an issue with a 2008 R2 Domain Controller. This DC is not a FSMO role holder. When this DC is fired up off the network, in an isolated environment (switch, couple pc's and the DC) it does not fire up as a DC. DNS and DHCP are non-functional,
network ID shows as Undefined Network.  Now, if I disable then re-enable the NIC, everything works. Netowrk shows mycompany.com and DNS and DHCP function. DNS in the NIC properties points to itself (actual IP not 127.0.0.1) with no other DNS servers configured
on the NIC.
This seems to be a new thing in my environment, as we have done small isolated networks before for brief periods of time.I have also seen this behavior at a branch office when power is lost and the DC starts up before the ipsec tunnel back is established.
Anyone have any ideas?
Thanks,
Jim

Hi,
Is there any error in event log?
Did you have any other DCs replicate with this DC?
Please refer to the similar thread:
Isolated Domain Controller Problem                                 
http://social.technet.microsoft.com/Forums/en-US/5015ec63-ed3c-435d-b27c-4e7ab1f2c824/isolated-domain-controller-problem?forum=winserverDS
Regards.
If you have any feedback on our support, please click
here
Vivian Wang

Similar Messages

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

  • I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

    I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

    You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite.  It is not listed on their system requirement website:
    Mac OS X 10.9 Mavericks
    Mac OS X 10.8 Mountain Lion
    Mac OS X 10.7 Lion
    Mac OS X 10.6 Snow Leopard*
    Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
    Only case insensitive file-system volumes are supported.
    http://www.graphisoft.com/support/system_requirements/archicad17.html

  • Itunes will not start when ipod is connected

    3G nano ipod when connected to windows xp,, Windows Expoler opens and shows ipod as "M" drive. But itunes starts only when I click icon on my desktop and dose not start when ipod is connected. When itunes runs it sees my ipod and all works fine. I have the box under Devices checked to start itunes when ipod connected. Thanks for your help

    Hello Loggroller,
    And welcome to Apple Discussions!
    Are you talking about the *Open iTunes when this iPod is connected* option from under your iPod's Summary tab? If not, make sure you have this option ticked as well.
    It might not hurt to try and remove and re-install iTunes and all Apple related software using these instructions.
    http://support.apple.com/kb/ht1925
    B-rock

  • ITunes does not start when I plug in my iphone after I upgraded to Lion?

    iTunes does not start when I plug in my iphone after I upgraded to Lion? It worked fine prior to upgrading.

    http://support.apple.com/kb/TS1538

  • ITunes does not start when iPhone plugs in

    my itune does not start when I plug my iphone or ipad in , this stater with lion install

    Please see here if it helps:
    https://discussions.apple.com/message/15705708#15705708
    Regards, Michael

  • My airport does not start when pligged in

    My aipport does not start when plugged in.  The light does not come on at all.  If there some kind of a reset switch?

    With no light at all, unfortunately it is likely that an internal component in the AirPort Express has failed.
    The reset switch is next to the audio jack. Try a different AC socket. With the AirPort Express plugged into power, hold in the reset button for 8-10 seconds, then release.
    If successful, the AirPort Express will restart to a solid amber light for 30-35 seconds, then begin to slowly blink amber after 40-45 seconds.
    If you try the reset a few times with no success, I'm afraid that the AirPort Express  has failed and will need to be replaced.

  • Web calendar interfase not started when starting http server

    Hi, I installed CS succesfully, the calendar server is working fine.
    My problem is that the web interfase is not started when starting the HTTP server.
    I checked the log files of the http server and I saw this:
    [Thu Jan  9 19:13:50 2003] [warn] [client 144.23.48.238] FastCGI request processing timed out
    [Thu Jan  9 19:15:19 2003] [notice] SIGHUP received. Attempting to restart
    [Thu Jan  9 19:15:23 2003] [error] (2)No such file or directory: FastCGI: access for server (uid -1, gid 501) failed: read not allowed by group
    [Thu Jan  9 19:15:23 2003] [notice] FastCGI: process manager initialized (pid 6897)
    [Thu Jan  9 19:15:23 2003] [warn] FastCGI: server "/u01/oracle/product/CS9.0.3/CSMT/Apache/Apache/fcgi-bin/owc/lexacal.fcgi" started (pid 6898)
    [Thu Jan  9 19:15:23 2003] [warn] FastCGI: server "/u01/oracle/product/CS9.0.3/CSMT/Apache/Apache/fcgi-bin/echo" started (pid 6899)
    [Thu Jan  9 19:15:24 2003] [notice] Oracle HTTP Server/1.3.22 (Unix) mod_plsql/9.0.2.0.0 DAV/1.0.2 (OraDAV enabled) mod_osso/9.0.2.0.0 mod_oc4j/3.0 mod_ossl/9.0.2.0.0 mod_fastcgi/2.2.12 mod_perl/1.26 configured -- resuming normal operations
    [Thu Jan  9 19:15:24 2003] [notice] Accept mutex: fcntl (Default: fcntl)
    [Thu Jan  9 19:15:34 2003] [warn] FastCGI: s[i]Long postings are being truncated to ~1 kB at this time.

    Hi Gonzalo,
    You will have to report this problem to the Oracle Support organization.
    They will most probably want to see your web configuration file, the httpd.conf, as well as the appropriate logs.
    thanks,
    Jean-Marc Robillard
    Product Management

  • Screensaver not starting when iTunes is running. Works otherwise...

    Hi everyone,
    My screensaver will not start when iTunes is running (also Spotify). When the app is closed, the screensaver starts when it's supposed to (5 min. in my case, but have tried other time limits). I've tried changing mouse settings and even shutting it off to see if that's the cause but it didn't help. I use the MacMini as a home theater computer hooked up to my plasma so I need the screensaver to work. In the meantime, I've been using hot corners to force screensaver, but I would love for it to start automatically when music is playing. I've tried rebooting, resetting, but to no avail.
    Has anyone else had this issue or know what the problem is?
    I'm running MacMini brand new. Mavericks 10.9.1. Latest iTunes.
    Thanks.

    I don't normally use the screensaver. However when I tested it, I get the same results while iTunes is running.
    I encourage you to report it using > Apple - Mac OS X - Feedback

  • PC does not start when pressing the power button, After that starts automatically like a ghost!

    I have HP Pavilion a6030in, My pc does not start when i press ther power button, but it starts after sometime automatically after that it works fine.
    Again when i shutdown and leave it for sometime, and still the problem is unsolved.
    Please Help
    This question was solved.
    View Solution.

    he figured out you dont just shut the lid and walk away, you use Windows shutdown
    click Kudos to say thanks if I helped

  • CSMONITOR not starting when calendar starts?

    Why does csmonitor not start when the calendar server starts? Is it not supposed to? I have it configured in the ics.conf file to run in looping mode, and check every 30 minutes. But if I don't actually go and start it manually...it never runs (no entries in the csmonitor log).
    If I start it manually... (/opt/SUNWics5/cal/sbin/csmonitor) ...then it just starts spitting a bunch of info to the screen and I have to kill the processes before it will go away.
    What's the method for getting csmonitor to start up when the calendar services start?
    Thanks,
    Matt

    Yep....it's been set that way for months and we've restarted the calendar services many times. It's not been a hot issue, but I just noticed that we had a problem a few days ago, and if the csmonitor had been running I would have been notified.
    So...it is set correctly...but still is not running.
    Thanks,
    Matt

  • I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer

    I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer. This usually works fine, so I don't know what I did to keep it form working.

    Are you using Windows? This tells you how to restart the AMDS for Windows.
    http://support.apple.com/kb/ts1567

  • Windows 7 not starting when partition is finished.

    I'm using a Macbook pro 15-inch 2011 using OSX yosemite trying to partition windows 7 ( 64-bit ). Whenever I try to partition my hardrive via book camp assistant and the partition part is successful but windows will not start when my mac restarts. I'm using an external cd drive which works. Its reading the disk but it windows simply won't start and I'll be stuck looking at a blank screen with a type symbol on a black screen similar to what you will find in any windows os. Please help.

    Is this what you have - MacBook Pro (15-inch, Early 2011) - Technical Specifications?
    This machine has
    Storage
    500GB or 750GB 5400-rpm Serial ATA hard drive; optional 750GB 5400-rpm hard drive, 500GB 7200-rpm hard drive, or 128GB, 256GB, or 512GB solid-state drive6
    8x slot-loading SuperDrive (DVD±R DL/DVD±RW/CD-RW)
    Maximum write: 8x DVD-R, DVD+R; 4x DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD-R; 10x CD-RW
    Maximum read: 8x DVD-R, DVD+R, DVD-ROM; 6x DVD-ROM (double layer DVD-9), DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD
    You cannot use an external Optical drive. If it is non-functional, you will have to fix it or replace it. This is because BCA sets the boot to be from the internal Optical drive physical address based on your Mac's Model Identifier. This is true for all Macs which have a built-in Optical drive.

  • Photosmart do not start when I push power ON/OFF

    My printer did not start when I push the ON/OFF button.  The power supply is in order.I dont use the printer frecvent. Some days ago I found that the color patrons was bad; I run a cleaning by the HD maintence program.When I today was going to put new colors the printer was dead!The printer is conected by a USB cable to my Pavillion500-317no computer.

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can clear some glitches after installing new software or apps.

  • Secondary domain controller not able to connect from work stations.

    We are using primary and secondary domain controllers. In which the secondary domain controller act as a replication server. actually the problem occurs while accessing the secondary domain controller from work stations I get the following error:
     "The trust relationship between this workstation and the primary domain failed".
    Any one please give as a solution.
    Thank you.

    Hi,
    Most simple resolution would be unjoin/disjoin the computer from the domain and rejoin the computer account back to the domain.
    There might be multiple reasons for this kind of behavior.
    Here are a few of them:
    Single SID has been assigned to multiple computers.
    If the Secure Channel is Broken between Domain controller and workstations
    If there are no SPN or DNS Host Name mentioned in the computer account attributes
    Outdated NIC Drivers.
    According your description, the second one may be the cause of your problem.
    When a Computer account is joined to the domain, Secure Channel password is stored with computer account in domain controller. By default this password will change every 30 days (This is an automatic process, no manual intervention is required).
    Upon starting the computer, Netlogon attempts to discover a DC for the domain in which its machine account exists. After locating the appropriate DC, the machine account password from the workstation is authenticated against the password on the DC.
    If there are problems with system time, DNS configuration or other settings, secure channel’s password between Workstation and DCs may not synchronize with each other.
    A common cause of broken secure channel [machine account password] is that the secure channel password held by the domain member does not match that held by the AD. Often, this is caused by performing a Windows System Restore (or reverting
    to previous backup or snapshot) on the member machine, causing an old (previous) machine account password to be presented to the AD.
    Follow below link which explains typical symptoms when Secure channel broken,
    Typical Symptoms when secure channel is broken
    http://blogs.technet.com/b/asiasupp/archive/2007/01/18/typical-symptoms-when-secure-channel-is-broken.aspx
    For detailed information, please refer to the link below,
    Troubleshooting AD: Trust Relationship between Workstation and Primary Domain failed
    http://social.technet.microsoft.com/wiki/contents/articles/9157.troubleshooting-ad-trust-relationship-between-workstation-and-primary-domain-failed.aspx
    Hope this helps.
    Steven Lee
    TechNet Community Support

Maybe you are looking for